Model #7650 Instruction Manual Patent Pending

Size: px

Start display at page:

Download "Model #7650 Instruction Manual Patent Pending"

Rafe Harrell
5 years ago
Views:

1 Model #7650 Instruction Manual Patent Pending

IMPORTANT SAFEGUARDS Read all instructions before use and keep for future reference. Use shaver and accessory chargers only for their intended purpose and according to these instructions.

2 IMPORTANT SAFEGUARDS Read all instructions before use and keep for future reference. Use shaver and accessory chargers only for their intended purpose and according to these instructions. Store in a clean, dry place. Use at temperatures between 30 F and 120 F. CAUTION Not intended for use on small children or animals. Use very close supervision when operating or storing around children. Always return protective cover back on the shaver heads when not in use. Shaver is designed for facial hair only. Use on head and other body parts is not advised. Shaver is intended for dry shaving only. To avoid damage to shaver, do not use with creams or lotions. Use only attachments that are included with this shaver. Unplug chargers and turn off the shaver before cleaning any part of this shaver. Follow cleaning and blade and foil replacement instructions carefully. Blades are sharp. Use caution when handling. Some skin types are sensitive to rotary shavers. Discontinue use if skin becomes irritated after prolonged use. DANGER To avoid serious injury, regularly inspect blades and foils for damage and proper installation. Do not operate shaver if blades or foils are loose in their housing, damaged, or very dull. To avoid the risk of electric shock and personnel injury, do not use in the tub or shower; or allow to fall into the sink. Do not store where it may come in contact with water. Discontinue use if shaver or chargers show any sign of electrical malfunction. SAVE THESE INSTRUCTIONS 2

3 PARTS IDENTIFICATION TRAVEL BAG MIRROR 12V DC CHARGING ADAPTER AC/DC CHARGING ADAPTER CLEANING BRUSH SHAVER HEADS CAP ASSEMBLY RELEASE BUTTON ON/OFF POWER BUTTON LOW BATTERY INDICATOR (RED) CHARGING INDICATOR (YELLOW) DYNAMO HAND CRANK DC INPUT PORT 3

4 4 CHARGING The shaver may be charged by three methods: dynamo hand crank, 120V AC/DC wall charger, and 12V DC vehicle charger. Dynamo charging is perfect for shaving when auxiliary power is not available. The shaver may also be operated directly from either of the two auxiliary chargers. The auxiliary chargers may be used to completely recharge the battery. The internal rechargeable lithium ion batteries never need to be replaced. Indicator Lights A red low battery indicator LED will illuminate when the unit needs to be recharged. A yellow charge indicator LED will illuminate when the unit is receiving power from any of the three methods of charging (dynamo or auxiliary chargers). The indicator light will gradually turn off as the battery level reaches full capacity. Note: leaving the auxiliary chargers connected to shaver after a full charge is achieved will not damage the shaver. Dynamo Hand Crank Charging 1. Make sure the unit is off before charging. 2. Open the hand crank and wind in either direction at approximately 130 revolutions per minute. 3. The yellow charge indicator light will illuminate while charging. 4. Charging and operating time: 1 minute of winding will equate to approximately 2 minutes shave time. When the low battery indicator is illuminated, using the dynamo hand crank to charge the shaver will produce a limited number of shaves. At that point it will effectively provide four 2-minute shaves until it will need to be fully charged using the auxiliary chargers. 120V AC/DC Power Charging 1. Make sure the unit off before charging. 2. Connect the male end of the 120V AC/DC charger into the DC input port of shaver and then insert the electrical plug into an electrical wall socket. 3. The yellow charge indicator light will illuminate while charging and will go off when fully charged. 4. Charging and operating time: Time to achieve full charge = 6 8 hours Run time from a full battery until the low battery indicator illuminates = minutes Quick Charge for 1-2 hours = minutes

5 12V DC Power Charging 1. Make sure the unit off before charging. 2. Connect the male end of the 12V DC charger into the DC input port of shaver and then insert the plug into a 12V power receptacle or cigarette lighter. 3. A green charging indicator light will illuminate on the 12V charger to verify proper connection and operation. 4. The yellow charge indicator light will illuminate on the shaver while charging and will go off when fully charged. 5. Charging and operating time: Time to achieve full charge = 6 8 hours Run time from a full battery until the low battery indicator illuminates = minutes Quick Charge for 1-2 hours = minutes BEFORE USING FOR THE FIRST TIME, WE RECOMMEND FULLY CHARGING USING EITHER THE 120V OR 12V CHARGER. SHAVING INSTRUCTIONS When using a new shaver, an adjustment period should be expected to allow your skin to get used to the new shaver and allow you to develop an effective shaving style. Before shaving: 1. Make sure the shaving blades and foils are installed correctly (see To Reinstall Blades & Foils in the cleaning section below). Never operate shaver with loose or broken blades or foils. 2. Always use a clean, dry shaver. 3. For best results, use on a freshly washed and dried face. To Shave: 1. Remove the protective cover from the shaver heads. 2. Turn on the shaver by pressing the On/Off button once. 3. Hold the shaver so that all three heads touch the face. Using it at an angle so that only one head touches the skin may cause irritation to the skin and excessive wear to one head. 4. Apply gentle pressure and use short, circular motions as you move the shaver across your face. Pressing too hard flattens the skin and whiskers, which is ineffective and prematurely wears out the blades. 5. Clean the blade and foil assembly after every shave (see cleaning section). 5

6 6 CLEANING For optimal performance of your shaver it is important to clean the blade and foil assembly after each use. Caution: Turn off the shaver and disconnect from any power supply before cleaning or changing the blades and foils. Never place any portion of the shaver or auxiliary chargers in water or other liquids for cleaning as the unit could be damaged. 1. Press the assembly release button and carefully remove the blade and foil assembly from the shaver body. (see figure 1) 2. To Clean the Hair Chamber: Using the provided cleaning brush, carefully sweep away any hair collected inside the internal chamber and around the blade shafts. A damp cloth may be used to wipe away any remaining hair particles. Wipe with a dry cloth. 3. To Clean the Blade and Foil Assembly: (see figure 2) a. Place the blade and foil assembly on flat surface and carefully remove the retaining ring by unscrewing the center screw in a counter clockwise direction until it is completely removed. b. Carefully remove one CENTER SCREW blade and foil at a time for cleaning taking care not to lose any parts. Please note RETAINING RING that each blade and foil is a matched set and care must be taken to assure they are not interchanged. TABS This would cause poor performance, uneven wear, and shorten life of the blades and foils. c. Carefully brush the blade CHROME SPRING and foil with the provided cleaning brush to remove BLADE hair particles and rinse with water and let dry. FOIL Handle carefully. Excessive pressure on the blades and foils could cause damage. d. Place the blade and foil back into the blade and foil assembly before moving on to the next blade. e. Before reassembling, sweep NOTCHES away hair particles from the retaining ring and center screw. HOUSING FIGURE 1 ASSEMBLY RELEASE BUTTON FIGURE 2

7 FIGURE 3 FIGURE 4 1. To Reinstall Blades & Foils: (see figure 2) a. If instructions were followed above, then each blade in back inside of it s matching foil and is sitting inside of the blade and foil assembly. b. Rotate each foil so that the notches in foil are properly aligned to receive the retaining ring tabs. (see figure 3) c. Place the retaining ring on top of the blades and foils with the chrome springs facing up. It is important that the notch in the foil is aligned with the tab on the retaining ring. d. Tighten the center screw clockwise until secure without over-tightening (figure 4). After assembling, check to make sure the blades and foils are installed correctly. The foils should not spin in the housing. If they do, remove the center screw and retaining ring to adjust the foil as needed. e. Place the blade and foil assembly back on shaver body. You should hear a click as it locks into place. Turn the shaver on and check for proper operation before storing. Always place the protective cover back on the shaver heads when not in use to protect it from dust and damage. 7

8 REPLACING BLADES AND FOILS With normal use, the shaver blades and foils should be replaced every 12 months to ensure a clean, close shave. You will know when it is time to replace your blades and foils when whiskers are pulled instead of cut or skin irritation develops. Use only Wind N Go Freedom Shaver replacement Part No Replacement parts may be purchased from your retailer or ordered from Athena Brands. Go to or call our Customer Service Department toll-free at Follow the instructions provided with the replacement blades and foils to ensure proper installation. MAINTENANCE AND REPAIR Under normal conditions and with proper care your shaver should not need any additional maintenance other than replacing the blades and foils. If the shaver or the auxiliary chargers fail to operate properly, take everything back to the place of purchase or contact Athena Brands at See product warranty for complete information. SPECIFICATIONS Internal Rechargeable Battery LIR123A 3.6V-600mA DC Input Power DC 5V-800mA 120V AC/DC Power Adapter UL Approved Input: 100V-240V AC, Hz, 0.15A Output: DC 5.0 V (800mA) positive polarity 12V DC Vehicle Power Adapter Input: 12V - 24V DC Output: DC 5.0V (800mA) positive polarity Fuse: Replace with glass fuse #F2AL250V, 2 Amp glass fuse, ¼ x 1¼ size (available at automotive and electronic stores) Weight 0.5 lbs. Dimensions 6 L X 2 W x 2.16 H Replacement Blades & Foils Part No ATHENA BRANDS is a division of Aervoe Industries, Inc. Gardnerville, NV mailbox@athenabrands.com 7650 Inst. CS-5/12//08

AT850. Always here to help you. Rechargeable Cordless/Cord Tripleheader Shaver. Register your product and get support at

AT850. Always here to help you. Rechargeable Cordless/Cord Tripleheader Shaver. Register your product and get support at AT850 Rechargeable Cordless/Cord Tripleheader Shaver Always here to help you Register your product and get support at www.norelco.com/register Question? Contact Philips Norelco 2 4 Congratulations on your