The uni Flex ASB Series improves performance in the following industries and applications:

Transcription

1 uni Flex AS 24 itch 25.4 (1.00 ) uni Flex AS This new generation of 1 pitch radius belts available with or without hold down tabs in combination with a flat or curved surface offers a unique patent design providing a very strong radius belt. This new generation is easier to clean and, especially with material, it has good release characteristics. The increased lateral stability allows fewer support strips than normal, where the beveled edges facilitates side way loading. Furthermore, the curved surface of the uni Flex AS CS belt offers a reduced contact area of 10% and a smooth transfer. And in combination with a 9 tooth sprocket it forms a circle allowing a the use of scraper against the belt. The uni Flex AS is a proven belt in spiral applications. The uni Flex AS Series improves performance in the following industries and applications: akery industry including dough transport, cooling lines, internal transport, metal detectors and packaging lines Seafood applications including tray packing lines Meat & poultry applications including packaging lines Spiral applications as proofing and freezing of croissants, cooling and resting roduct features: Improved strength 60% higher than similar belts, so longer conveyors are possible material containing a selflubricating component, improving nonstick characteristics and reducing friction Easy to clean due to improved hygienic design of the hinges Efficient product transfer and less product contact area (efficient cooling) with the curved surface type Fewer support strips required due to increased lateral stability

2 uni Flex AS 25 Selection 25.4 (1.00 ) Snap in A2 uni Flex AS uni Flex AS R uni Flex AS T Ø ø4.0 (0.16 ) atent Materials atent pending See page 8 uni Flex AS CS uni Flex AS CS T uni Flex AS Rubber Top 25.0 (0.98 ) uni Flex AS AS T AS CS AS CS T AS Rubber Top AS Edge: M inside radius 2.2 x belt width. uni Flex AS R: M inside radius 1.6 x belt width. See page 30 See page 172 uni Flex AS Edge Alternative Dimensional Sketches T LG Q T T Z Y Accessories See page 29 uni Flex AS uni Flex AS R uni Flex AS T See page 30 Q Z Y uni Flex AS CS uni Flex AS CS T S T R uni Flex AS Edge uni Flex AS Edge U Indent for uni Flex AS R: M indent inside 230 ( ) M indent outside: 52 ( ) Indent for uni Flex AS AS R AS CT AS CS AS CS T: M indent inside & outside: 52 ( ) uni Flex AS Rubber Top

3 uni Flex AS 26 Dimensions Q T Y Z S R U Materials and Colors Type materials and colors pin materials and colors uni Flex AS G uni Flex AS R uni Flex AS T uni Flex AS CS uni Flex AS CS T uni Flex AS Rubber Top +03 K +03 uni Flex AS Edge Alternative pin materials: See page 25.

4 uni Flex AS 27 ricklayed elt idths (See below for Single Link widths) On above belt width values, the belt width tolerance on standard materials is +0/0.4% at 23 C/73 F. uni Flex AS Single Link uni Flex AS Single Link is available in the following standard widths: K (301.1 (11.85 )) K (306.0 (12.05 )) K AS RRS (306.8 (12.08 )) The both link is split in two and used as the outer part of the belt. The center module are used in the middle of the belt. K AS RLS (306.8 (12.08 )) K300 (76.2 (3 )) K600 (152.4 (6 )) K (5.80 ) K (70.6 (2.78 )) oth K300 and K600 are available as left and right module (11.42 ) uni Flex AS Single Link standard materials and colors see page 25 uni Flex AS standard Single Link widths elt type and widths K279 Outer 70.6 (2.78 ) K300 Outer 77.0 (3.03 ) K580 Outer (5.80 ) K600 Outer (6.04 ) K Left or Right (12.08 ) K oth (11.85 ) K Center (11.85 ) uni Flex AS uni Flex AS R uni Flex AS T uni Flex AS CS uni Flex AS CS T uni Flex AS Rubber Top uni Flex AS Edge

5 uni Flex AS 28 Max. ermissible Load in Curve elt material in material elt width OM lbf lbf uni Flex AS 3 < = < 6 uni Flex AS T 3 < = < 6 uni Flex AS CS 3 < = < 6 uni Flex AS CS T 3 < = < 6 uni Flex AS Rubber Top 3 < = < 6 uni Flex AS Edge 3 < = < 6 uni Flex AS 6 < = < 12 uni Flex AS T 6 < = < 12 uni Flex AS CS 6 < = < 12 uni Flex AS CS T 6 < = < 12 uni Flex AS Rubber Top 6 < = < 12 uni Flex AS Edge 6 < = < 12 uni Flex AS 12 < = < 18 uni Flex AS R 12 < = < 18 uni Flex AS T 12 < = < 18 uni Flex AS CS 12 < = < 18 uni Flex AS CS T 12 < = < 18 uni Flex AS Rubber Top 12 < = < 18 uni Flex AS Edge 12 < = < 18 uni Flex AS > 18 uni Flex AS R > 18 uni Flex AS CS > 18 uni Flex AS CS > 18 uni Flex AS CS T > 18 uni Flex AS Rubber Top > 18 uni Flex AS Edge > 18 Max. ermissible Load in Straight Sections elt material OM in material /m lbf/ft /m lbf/ft uni Flex AS uni Flex AS R uni Flex AS T uni Flex AS CS uni Flex AS CS T uni Flex AS Rubber Top uni Flex AS Edge

6 uni Flex AS 29 elt eights elt material in material OM uni Flex AS uni Flex AS R uni Flex AS T uni Flex AS CS uni Flex AS CST uni Flex AS Rubber Top uni Flex AS Edge kg/m 2 lb/ft 2 kg/m 2 lb/ft Design Guidelines E uni Flex AS AS AS R AS CT AS CS AS CS T: Radius 2.2 uni Flex AS R Radius 1.6 A m 1.5 x m 1.5 x min 3.2 x m 2.6 x C C D min 2.2 x min 2 x m 1.6 x D E min 2 x, m C elt width For m conveyor dimensions please refer to sketch and diagram. A ote: uni Flex AS 1.6 can not be used in conveyors with both left and right turning curves. All curves have to turn in the same direction. Accessories Lane Divider H Dimensions H I min I Lane Divider ote: Lane dividers can be placed in multiples of 25.4 Materials and Colors

7 uni Flex AS 30 Accessoires roduct Support H uni Flex AS roduct Support Flat Materials and Colors Type H idth Type uni Flex AS roduct Support Flat uni Flex AS roduct Support Flat K600 K Minimum bricklayed indent for uni Flex AS is 40 (1.57 in) materials and colors Sprockets o. of itch diameter Overall diameter Hub diameter ore Reference no. teeth plastic ø18.0/25.0 ø0.71/ A6FAS ø18.0/30.0 ø0.71/ A6FAS sq 25.4 sq A6FAS I100S ø18.0/ / A6FAS sq 38.1 sq A6FAS I150S ø18.0/70.0 ø0.71/ A6FAS sq 38.1 sq A6FAS I150S sq 40.0 sq A6FAS M040S ø18.0/70.0 ø0.71/ A6FAS sq 38.1 sq A6FAS I150S sq 40.0 sq A6FAS M040S lacement of earstrips and Sprockets o. of teeth Minimum dimension earstrip distance A A idth of sprockets: 30.0 (1.18 ) Tooth width: 7.0 (0.28 ) material: A6 Other sprocket sizes are available upon request.

8 uni Flex AS 31 lacing of Sprockets Spiral Spiral Duplex Duplex Max. Load per Sprocket elt material OM lbf lbf uni Flex AS uni Flex AS R uni Flex AS T uni Flex AS CS uni Flex AS CS T uni Flex AS Rubber Top uni Flex AS Edge