MATERIAL SAFETY DATA SHEET

Transcription

1 MATERIAL SAFETY DATA SHEET DATE PRINTED: JUL 31, 2007 MSDS NO OUTBOUND Liquid Ice Polishing Compound (Gallon) SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION PRODUCT NAME Liquid Ice Polishing Compound (Gallon) TRADE NAME MANUFACTURER(4) Saint-Gobain Abrasives, Inc. One New Bond Street Worcester, MA, (508) REVISION DATE 2/16/2007 MSDS PRINT FORMAT NUSA SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS SUBSTANCE DESCRIPTION PERCENT CAS# Aluminum Oxide, Non-fibrous Copolymer PROPRIETARY Hydrocarbons, mineral oil Mineral Spirits OTHER (1 of 5)10/1/2007 8:56:23 AM

2 SECTION 3. HAZARDS IDENTIFICATION INHALATION ACUTE EXPOSURE EFFECTS Excessive inhalation of vapors can cause nasal and respiratory irritation. INHALATION CHRONIC EXPOSURE EFFECTS Inhalation of vapors may be irritating to the mucous membrane and cause nausea EYE CONTACT ACUTE EXPOSURE EFFECTS May cause irritation, redness, tearing, blurred vision. SKIN CONTACT ACUTE EXPOSURE EFFECTS May cause drying, irritation. INGESTION ACUTE EXPOSURE EFFECTS Can cause gastrointestinal irritation, nausea, vomiting and diarrhea.aspirations of material into lungs can cause chemical pneumonitis which can be fatal. SECTION 4. FIRST AID MEASURES INHALATION If affected, remove individual to fresh air. If breathing is difficult, administer oxygen. If breathing has stopped give artifical respiration. Keep person warm, quiet and get medical attention. SKIN CONTACT Wash contaminated areas with soap and water. Remove contaminated clothing and wash before re-use. EYE CONTACT Immediately flush with large amounts of water for at least 15 minutes, holding eyelids apart to ensure flushing of the entire surface. Get medical attention. INGESTION Do not induce vomiting. If conscious, give 2 glasses of water. Keep person warm, quiet and have medical personnel determine if vomiting or evacuation of stomach is necessary. Aspiration of material into lungs due to vomiting may cause chemical pneumonitis which can be fatal. SECTION 5. FIRE FIGHTING MEASURES FIRE FIGHTING PROCEDURES Cool exposed containers with water. HAZARDOUS PRODUCTS/COMBUSTION Combustion can produce Carbon Monoxide, CO2 and various hydrocarbons. HAZARD RATING SOURCE (2 of 5)10/1/2007 8:56:23 AM

3 HMIS HEALTH 1 FLAMMABILITY 2 REACTIVITY 0 OTHER SECTION 6. ACCIDENTAL RELEASE MEASURES CLEAN-UP Follow normal clean up procedures. SECTION 7. HANDLING AND STORAGE HANDLING Containers of this material may be hazardous when emptied, as emptied containers retain product residues (vapor, liquid and/or solid). All hazard precautions retain precautions given in MSDS must be observed.never weld or heat any empited container. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION VENTILATION PROTECTION Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below recommended TLV. RESPIRATORY PROTECTION If exposure is expected to exceed suggested TLV, a NIOSH/MSHA approved air supplied respirator with dust filter is advised in absence of proper environmental controls. EYE PROTECTION OTHER PROTECTION An eye wash station should be maintained in the immediate work area. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE & ODOR Grey colored w/white specs cream emulsion with a light hydrocarbon odor (3 of 5)10/1/2007 8:56:23 AM

4 SECTION 10. STABILITY AND REACTIVITY INCOMPATIBILITIES Avoid contact with strong oxidizers. DECOMPOSITION Combustion can produce Carbon Monoxide, CO2, and various hydrocarbons SECTION 11. TOXICOLOGICAL INFORMATION CARCINOGENICITY This product does not contain a chemical considered to be a known carcinogen by IARC, NTP or OSHA to date. LD50/LC50 SECTION 12. ECOLOGICAL INFORMATION CHEMICAL FATE SECTION 13. DISPOSAL CONSIDERATIONS WASTE DISPOSAL Dispose of in accordance with all applicable local, state and federal regulations. SECTION 14. TRANSPORT INFORMATION HAZARD CLASS SECTION 15. REGULATORY INFORMATION EXPOSURE LIMITS/REGULATORY INFORMATION (4 of 5)10/1/2007 8:56:23 AM

5 SUBSTANCE DESCRIPTION UNITS OSHA ACGIH MOL Aluminum Oxide, Non-fibrous Copolymer Hydrocarbons, mineral oil Mineral Spirits MG/M PPM MG/M PPM LEGEND: EXPOSURE LIMIT DESCRIPTIONS CA PROP 65 Does not contain Prop 65 chemicals. TSCA Section 8(b) - Inventory Status All components of this product are registered under the regulations of the Toxic Substance Control Act. DOMESTIC SUBSTANCE LIST All components of this product are found on the Domestic Substance List. SECTION 16. OTHER INFORMATION DISCLAIMER The above data was compiled from sources believed to be reliable and representing the most reasonable and current opinion on the subject when this sheet was prepared. It is the users responsibility to determine the suitablility of the information for the adoption of safety measures necessary to safely use this product either alone or in combination with other products. The user has the responsibility to contactthe company to ensure that the MSDS being used in the latest issue. KEY TO ABBREVIATIONS: EQ=EQual LT=Less Than GT=Greater Than AP=APproximately TR=TRace ND=No Data available = (5 of 5)10/1/2007 8:56:23 AM