COSMETIC RAW MATERIALS

Transcription

1 Worlée-Chemie GmbH Grusonstraße Hamburg - Germany Tel. +49 (0) Fax +49 (0) cosmetics@worlee.de -

2 Aqueous polymer dispersions and solutions that can be used in various cosmetic formulations as film formers. WorléeMicromer C20/41 WorléeMicromer C50/25 WorléeMicromer C20/41 is a hydrophobic film forming polymer. It forms clear and flexible films and supports the suppleness of eyelashes following the application of products like mascara. It is used to improve the film properties of decorative formulations and forms glossy and non-tacky films. It is supplied as dispersion in water. Worlée Micromer C50/25 is a film former and supplied as a clear solution in water. It is free of surfactants and PEG. It forms highly transparent and glossy films. This product is primarily used as a basic polymer in decorative cosmetic preparations. It facilitates pigment incorporation and increases the hold and durability of formulations after application. WorléeMicromer C50/25 is ideally suited as a dispersing medium for pigments. It can be used, as hair fixative polymer for use in clear, hard holding hair gels, mousses, and other styling aids. It shows a very good compatibility with alcohols. WorléeMicromer C60/42 WorléeMicromer C60/42 is a hydrophobic acrylic copolymer. Because the polymer is inherently moisture resistant, WorléeMicromer C60/42 can be used in waterproof formulations like eyeliners, mascara, sunscreens, foundations as well as a variety of creams and lotions. The film forming polymer help maintain active ingredients on the site of application by imparting resistance to abrasion or rub-off. It forms clear and flexible films and has been shown to significantly improve durability. It is supplied as dispersion in water. WorléeMicromer C70/61 WorléeMicromer C70/61 is a hydrophobic film forming polymer. It provide good flexibility and adhesion to form clear, glossy, transparent and non-tacky films. Thanks to the special manufacturing process, the polymers exhibit a high film hardness with lower MFT (minimum film formation temperature). Due to the additional self-crosslinking of the polymer film during drying, its resistance increases over time. In a nail polish the polymer dry quickly on the nail and build a touch-dry in under a minute. WorléeMicromer C70/61 can also be used in waterproof formulations like eyeliners, mascara etc. WorléeMicromer C70/63 WorléeMicromer C70/63 is a hydrophobic film forming polymer. It provide good flexibility and adhesion to form clear, glossy, transparent and non-tacky films. Thanks to the special manufacturing process, the polymers exhibit a high film hardness with lower MFT (minimum film formation temperature). Due to the additional self-crosslinking of the polymer film during drying, its resistance increases over time. In a nail polish the polymer dry quickly on the nail and build a touch-dry in under a minute.

3 WorléeAqua Thix are liquid acrylic dispersions used for thicken, suspend and stabilize surfactant-containing products and emulsions. WorléeAqua Thix 100 Acrylates Crosspolymer WorléeAqua Thix 100 is a liquid acrylic dispersion designed to thicken, suspend and stabilize cleansing products containing low and high levels of surfactants or electrolytes. It offer emulsion stability and suspending of pigments in skin and sun care products and enhances pigment distribution in color cosmetics resulting in pleasant aesthetics and high coverage. It is a costeffective and easy to handle product with numerous benefits. WorléeAqua Thix 150 Acrylates WorléeAqua Thix 150 is a liquid acrylic dispersion designed to thicken, suspend and stabilize products containing low and high levels of surfactants or electrolytes. It is a cost-effective and easy to handle product with numerous benefits. The formulator can create sophisticated cleansing products with different textures ranging from clear formulations with suspended particles to pearlescent systems and oil-rich shower creams. For over 30 years the company Worlée-Chemie GmbH is supplier in the field of Aloe Vera. Our experiences with this raw material can be found even today in our products. WorléeAloe Gel 1x WorléeAloe Gel 10x WorléeAloe IF 200x FD Bio WorléeAloe IF 200x FD WorléeAloe IF 200x SD Bio WorléeAloe IF 200x SD WorléeAloe WL 100x FD Only the inner part, the gel is used. Additional filtration for pigment reduction. The whole leaf is used. Additional filtration to reduce color pigment and aloin

4 Ready-pigment dispersions with regulary color strength based on a polymer-pigment mixture in water. Product Colour INCI WorléeBase AQ 77891/1 Titanium Dioxide, white Aqua, Titanium Dioxide,, Methylpropanediol, Sodium Acrylates, Caprylyl Glycol, Phenylpropanol WorléeBase AQ 77492/1 Iron Oxide, yellow Aqua, CI 77492,, Methylpropanediol, Sodium Acrylates, Simethicone, Caprylyl Glycol, Phenylpropanol WorléeBase AQ 77491/1 Iron Oxide, red Aqua, CI 77491, Methylpropanediol,, Caprylyl Glycol, Phenylpropanol, Sodium Acrylates, Simethicone WorléeBase AQ 77007/1 Ultramarine, blue CI 77007, Aqua, Methylpropanediol,, Sodium Acrylates, Simethicone, Caprylyl Glycol, Phenylpropanol WorléeBase AQ 77499/1 Iron Oxide, black Aqua, CI 77499, Methylpropanediol,, Simethicone, Caprylyl Glycol, Phenylpropanol, Sodium Acrylates WorléeBase AQ 77266/1 Carbon Black, FDA-certified Aqua,, CI (nano), Methylpropanediol, Simethicone, Caprylyl Glycol, Phenylpropanol WorléeBase AQ 15850:1/1 Red 7 Lake Aqua, CI15850:1, Barium Sulfate,, Methylpropanediol, Sodium Acrylates, Caprylyl Glycol, Phenylpropanol, Simethicone WorléeBase AQ 15850:2/1 Red 6 Lake Aqua, CI15850:2, Barium Sulfate,, Methylpropanediol, Sodium Acrylates, Caprylyl Glycol, Phenylpropanol, Simethicone WorléeBase AQ 19140/1 Yellow 5 Lake Aqua, Aluminium Hydroxide, CI19140,, Methylpropanediol, Sodium Hydroxide, Caprylyl Glycol, Phenylpropanol, Simethicone Aqua, CI77510,, WorléeBase AQ 77510/1 Ferric Ammonium Ferrocyanide Methylpropanediol, Sodium Hydroxide, Caprylyl Glycol, Phenylpropanol, Simethicone

5 Ecological and economical alternative to PE and PP Exfoliants in cosmetic products like scrubs or shower gels. Product INCI Mesh Sizes WorléeBeads HCO White Hydrogenated Castor Oil 60/100 mesh WorléeBeads HCO Hydrogenated Castor Oil, Blue Blue 1 Lake 60/100 mesh Snow White Rose Red Crazy Pink Amazon Green Mint Green Aqua Deep Sea Blue Sunflower Purple Steelblue Black *40/60 mesh size available on request Hydrogenated Jojoba Oil CI 73360, Talc CI 73360, Talc CI CI CI 77289, CI 77007** CI 77007** CI CI 77007**, CI 73360, Talc CI 77510, Talc CI /100 mesh ** Ultramarine Blue pigment is sometimes unstable in products with a ph value of less than 7. The pigment may possibly decompose. Notes Worlée-Chemie GmbH Grusonstrasse 22, DE Hamburg Tel.: +49(0) Fax: +49(0) cosmetics@worlee.de