Material Safety Data Sheet. UNI-ETCH with BAC

Size: px

Start display at page:

Download "Material Safety Data Sheet. UNI-ETCH with BAC"

Lindsay Anissa Fisher
6 years ago
Views:

1 Material Safety Data Sheet UNI-ETCH with BAC 1. Identification of Substance/Preparation and Company/Undertaking Product Name: UNI-ETCH with BAC Manufacturer: Bisco, Inc W Irving Park Road, Schaumburg, IL USA Telephone: , during normal business hours Emergency Telephone Number: CE Administrator: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted Bisico France, B.P. 60, 'L-Opera' Lancon de Provence Emergency Telephone: (33) Composition/Information on Ingredients Ingredient Symbol/Risk Concentration CAS Range (%) Number Classification 32 C, R34 <1 Xi; R36/38 Phosphoric acid Benzalkonium chloride OSHA PEL ACGIH LD50 (mg/kg, rat/oral) Hazards Identification Corrosive, causes burns, 4. First Aid Measures Inhalation: Provide fresh air and rest. Wash with soap and water. Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention. Ingestion: Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested. Do not induce vomiting. 5. Firefighting Measures Firefighting media: Dry chemical powder, foam or carbon dioxide. Fire and explosion risks: Upon combustion, irritating gases may form. 6. Accidental Release Measures Personal Precautions: Prevent skin/eye contact, Environmental Avoid ground water contamination, Precautions: Methods for Cleaning Up: Wipe with damp paper towel. Discard properly, 7. Handling and Storage Use according to directions for use. Store at room temperature in the original container provided by the manufacturer. Avoid unnecessary exposure to the product. At high temperatures toxic fumes of phosphoric acid and phosphorous oxides can be generated; 8. Exposure Controls/Personal Protection

2 Eye Protection: Use protective eyewear; Hand Protection: Use protective gloves; Respiratory Protection: Avoid prolonged breathing of vapors; Skin Protection: Use Any necessary hygiene measures; 9. Physical/Chemical Properties Appearance Semi-gel Vapor <0.02mm 20C/68F Color Blue Miscibility N/A Odor Odorless Vapor Density N/A Solubility (H2O, fat) Soluble ph <1 Boiling Point/Range >100C/212F Evaporation Rate N/A Melting Point/Range <0C/32F Viscosity N/A Flash Point N/A Partition Coefficient N/A Conductivity N/A Autoflammability N/A Explosive Properties N/A Flammability Non Flammable Oxidizing Properties N/A Relative Density >1 10. Stability and Reactivity Stable. Avoid high temperatures. Incompatibility to strong caustics; metals; sulfides and sulfites; 11. Toxicological Information Causes burns; Causes burns; Sensitization: N/A; Other: If swallowed, may cause sore throat and burns of the mouth and throat. Prolonged exposure may cause burns to the respiratory tract, contact with soft tissues may cause burns, 12. Ecological Information There is no specific information on the product. Use according to good working practices, avoiding release of the product into environment. 13. Disposal Considerations Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste. 14. Transport Information No special precautions. 15. Regulatory Information Classification: C Corrosive, R34 Causes burns., Safety: Refer to any applicable National laws, 16. Other Information Revision Date: 7/25/2006 Replaces MSDS dated: 12/03/2004 Revision Number: 7 Product: UNI-ETCH with BAC

3 This information is believed to be correct as of the date of this MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information and supplies it on the condition that the person receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will the manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein. NOTE: CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours

4 Material Safety Data Sheet ONE-STEP PLUS 1. Identification of Substance/Preparation and Company/Undertaking Product Name: ONE-STEP PLUS Manufacturer: Bisco, Inc W Irving Park Road, Schaumburg, IL USA Telephone: , during normal business hours Emergency Telephone Number: CE Administrator: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted Bisico France, B.P. 60, 'L-Opera' Lancon de Provence Emergency Telephone: (33) Composition/Information on Ingredients Ingredient Biphenyl dimethacrylate Hydroxyethyl methacrylate Acetone Dental Glass Concentration Range (%) >10 >10 >40 >10 CAS Number Proprietary Symbol/Risk Classification Xi; R36/38-43 Xi; R43 F;R11 Xi R N/A OSHA PEL 2400 ACGIH 1187 LD50 (mg/kg, rat/oral) Hazards Identification Flammable-Highly Flammable, Irritant- Irritating to eyes and skin; May cause sensitization by skin contact. Repeated exposure may cause skin dryness or cracking- Vapors may cause drowsiness and dizziness., 4. First Aid Measures Inhalation: Provide fresh air and rest. Wash with soap and water. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Seek medical attention. Ingestion: Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested. 5. Firefighting Measures Firefighting media: Dry chemical powder, foam or carbon dioxide. Fire and explosion risks: Upon combustion, irritating gases may form. 6. Accidental Release Measures Personal Precautions: Prevent skin/eye contact, Environmental Avoid ground water contamination, Precautions: Methods for Cleaning Up: Wipe with damp paper towels. Discard properly, 7. Handling and Storage Store in ventilated; dry; cool (20 C/68 F - 25 C/77 F) place; avoid high light intensity

5 >10000 lux; this product is used exclusively for dental purposes by trained personnel.; 8. Exposure Controls/Personal Protection Eye Protection: Use protective eyewear; Hand Protection: Use protective gloves; Respiratory Protection: Avoid prolonged breathing of vapors of uncured material; Skin Protection: Use any necessary hygiene measures; 9. Physical/Chemical Properties Appearance Liquid Vapor 182 mm/hg 20C/68F Color Straw colored, hazy Miscibility N/A Odor Slight odor of Vapor Density 2 acetone Solubility (H2O, fat) Slightly Miscible ph 4-5 Boiling Point/Range >56C/133F Evaporation Rate 14.2 Melting Point/Range <0C/32F Viscosity N/A Flash Point -19C/-2F Partition Coefficient N/A Conductivity N/A Autoflammability N/A Explosive Properties N/A Flammability Flammable Oxidizing Properties N/A Relative Density Stability and Reactivity Avoid high temperatures; 11. Toxicological Information Irritates the eyes; May irritate the skin; Sensitization: May cause allergic reaction on contact with the skin; Other: Repeated exposure may causs skin dryness or cracking. Vapors may cause drowsiness and dizzness., 12. Ecological Information N/A 13. Disposal Considerations Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste. 14. Transport Information No special precautions. 15. Regulatory Information Classification: Xi Irritant, F Flammable, R11 Highly flammable, R36 Irritating to eyes, R38 Irritating to skin, R43 May cause sensitization by skin contact, R66 Repeated exposure may cause skin dryness or cracking, R67 Vapors may cause

6 drowsiness and dizziness., Safety: S(2-) Keep out of reach of children. Keep container in a well ventilated place. Keep away from sources of ignition. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice, 16. Other Information Revision Date: 11/29/2010 Replaces MSDS dated: 08/09/2010 Revision Number: 12 Product: ONE-STEP PLUS This information is believed to be correct as of the date of this MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information and supplies it on the condition that the person receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will the manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein. NOTE: CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours

9 Material Safety Data Sheet LIGHT CORE 1. Identification of Substance/Preparation and Company/Undertaking Product Name: LIGHT CORE Manufacturer: Bisco, Inc W Irving Park Road, Schaumburg, IL USA Telephone: , during normal business hours Emergency Telephone Number: CE Administrator: CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted Bisico France, B.P. 60, 'L-Opera' Lancon de Provence Emergency Telephone: (33) Composition/Information on Ingredients Ingredient Bis-GMA Ethoxylated Bis-GMA Glass Filler Concentration Range (%) >5 >1 >50 CAS Number Symbol/Risk Classification Xi; R36/38/43 Xi; R36/37/38 N/A OSHA PEL 0 5 ACGIH 0 5 LD50 (mg/kg, rat/oral) 3. Hazards Identification Irritant; Irritating to eyes, respiratory system and skin, May cause sensitization by skin contact., 4. First Aid Measures Inhalation: Provide fresh air and rest. Wash with soap and water. Flush with running water for at least 15 minutes while keeping eye lids open; seek medical attention. Ingestion: Drink two glasses of water or milk. Seek medical attention if a substantial amount has been ingested. 5. Firefighting Measures Firefighting media: Dry chemical powder, foam or carbon dioxide. Fire and explosion risks: Upon combustion, irritating gases may form. 6. Accidental Release Measures Personal Precautions: Prevent skin/eye contact, Environmental Avoid ground water contamination, Precautions: Methods for Cleaning Up: Wipe with damp paper towels. Discard properly, 7. Handling and Storage This product is used exclusively for dental purposes by trained personnel; Avoid high light intensity > 10; 000 lux; Store in ventilated cool dry place (<22C ; 72F);

10 8. Exposure Controls/Personal Protection Eye Protection: Use protective eyewear; Hand Protection: Use protective gloves; Respiratory Protection: Avoid prolonged breathing of vapors of uncured material; Skin Protection: Use Any necessary hygiene measures; 9. Physical/Chemical Properties Appearance Viscous paste Vapor 20C/68F N/A Color Straw colored / Blue Miscibility N/A Odor Slight acrylic odor Vapor Density N/A Solubility (H2O, fat) Insoluble ph N/A Boiling Point/Range N/A Evaporation Rate N/A Melting Point/Range N/A Viscosity N/A Flash Point >55C/131F Partition Coefficient N/A Conductivity N/A Autoflammability N/A Explosive Properties N/A Flammability N/A Oxidizing Properties N/A Relative Density >1 10. Stability and Reactivity Avoid high temperatures; 11. Toxicological Information Irritates the eyes; May irritate the skin; Sensitization: May cause allergic reaction on contact with the skin; Other: N/A, 12. Ecological Information N/A 13. Disposal Considerations Refer to any Community provisions relating to waste. In their absence, refer to National or Regional provisions relating to waste. 14. Transport Information No special precautions. 15. Regulatory Information Classification: Xi Irritant, R36 Irritating to eyes R37 Irritating to the respiratory system R38 Irritating to skin., R43 May cause sensitization by skin contact., Safety: Refer to any applicable National laws, 16. Other Information Revision Date: 12/2/2008 Replaces MSDS dated: 11/21/2006 Revision Number: 6 Product: LIGHT CORE

11 This information is believed to be correct as of the date of this MSDS. The manufacturer makes no representation as to the completeness or accuracy of this information and supplies it on the condition that the person receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will the manufacturer be responsible for damages of any nature whatsoever resulting from the use of or reliance upon the information contained herein. NOTE: CHEMTREC provides an emergency telephone number in the event of an emergency for leak, fire, exposure or accident involving the hazardous material that is being shipped. All non-emergency inquiries should be directed to Bisco during normal working hours

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: AG 190 PRIMER SYNONYMS: PRODUCT CODES: WB7153-450 MANUFACTURER: Flexabar Corporation DIVISION: ADDRESS: 1969 Rutgers University Blvd. Lakewood,