ITSIPREP Material Safety Data Sheet. Name CAS # % Sodium Phosphate, monobasic <0.01 Sodium Phosphate, dibasic <0.

Size: px

Start display at page:

Download "ITSIPREP Material Safety Data Sheet. Name CAS # % Sodium Phosphate, monobasic <0.01 Sodium Phosphate, dibasic <0."

Jessie Snow
5 years ago
Views:

1 1. Product and Company Information Trade Name: Buffer 1 Cat. No.: K Company: ITSI Biosciences 633 Napoleon Street Johnstown, PA Phone: Fax: ITSIPREP Material Safety Data Sheet 2. Composition, Information on Ingredients Name CAS # % Sodium Phosphate, monobasic <0.01 Sodium Phosphate, dibasic < Hazards Identification HMIS Rating NFPA Rating 4. First Aid Measures After Eye Contact: Immediately flush eyes with plenty of water for at lease 15 minutes. Separate eyelids. Get medical attention. After Skin Contact: After Ingestion: Immediately wash skin with soap and plenty of water. Wash out mouth with water provided person is conscious. Call After Inhalation: 5. Fire Fighting Measures Suitable Extinguishing Agents: Remove to fresh air. If breathing becomes difficult, call a Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. ITSI Biosciences, LLC/ Updated: January,

2 Protective Equipment: Specific Hazard(s): Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Emits toxic fumes under fire conditions. 6. Accidental Release Measures Methods for Cleaning: 7. Handling and Storage Handling: Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. Avoid inhalation. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure. Storage: Keep container tightly closed. 8. Exposure Controls, Personal Protection Engineering Controls: Personal Protection: Eyes: Skin: Respiratory: Safety shower and eye bath. Mechanical exhaust required. Wear appropriate safety eyeware complying with approved standards to avoid exposure to liquid splashed, mists or dusts. Wear appropriate protective gloves and clothing to avoid exposure to the skin. Wear dust mask. General Hygiene Measures: Wash thoroughly after handling. 9. Physical and Chemical Properties Physical State: Solid-powder Color: White Odor: ph: Vapor Pressure: Vapor Density: Evaporation Rate: Viscosity: Boiling Point: Freezing/Melting Point: 10. Stability and Reactivity Stability: Stable Incompatibility with Various Substances: Strong oxidizing agents. Strong acids. ITSI Biosciences, LLC/ Updated: January,

3 Hazardous Decomposition Products: Posphorous oxides, Sodium oxides. Hazardous Polymerization: Will not occur. 11. Toxicological Information Route of Exposure Skin Contact: May cause skin irritation. Skin Absorption: May be harmful if absorbed through the skin. Eye Contact: May cause eye irritation. Inhalation: May be harmful if inhaled. Material may be irritation to mucous membranes and upper respiratory tract. Ingestion: May be harmful if swallowed. Signs and symptoms of Exposure: To the best of our knowledge, the chemicals, physicals, and toxicological properties have not been thoroughly investigated. 12. Ecological Information No information available. 13. Disposal Consideration Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste and must consult local and state waste regulations to comply with all requirements. 14. Transport Information This substance is considered to be non-hazardous for transport. 15. Regulatory Information U.S. Federal Regulations: SARA Listed: No TSCA Inventory Item: Yes 16. Other Information The information contained herein is believed to be accurate and represents the best information currently available to us. The supplier does not assume any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. ITSI Biosciences, LLC/ Updated: January,

4 17. Product and Company Information Trade Name: Buffer 2 Cat. No.: K Company: ITSI Biosciences 633 Napoleon Street Johnstown, PA Phone: Fax: ITSIPREP Material Safety Data Sheet 18. Composition, Information on Ingredients Name CAS # % Sodium Phosphate, monobasic <0.02 Sodium Phosphate, dibasic < Hazards Identification HMIS Rating NFPA Rating 20. First Aid Measures After Eye Contact: Immediately flush eyes with plenty of water for at lease 15 minutes. Separate eye lids. Get medical attention. After Skin Contact: After Ingestion: Immediately wash skin with soap and plenty of water. Wash out mouth with water provided person is conscious. Call After Inhalation: 21. Fire Fighting Measures Suitable Extinguishing Agents: Remove to fresh air. If breathing becomes difficult, call a Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. Protective Equipment: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. ITSI Biosciences, LLC/ Updated: January,

5 Specific Hazard(s): Emits toxic fumes under fire conditions. 22. Accidental Release Measures Methods for Cleaning: 23. Handling and Storage Handling: Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. Avoid inhalation. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure. Storage: Keep container tightly closed. 24. Exposure Controls, Personal Protection Engineering Controls: Personal Protection: Eyes: Skin: Respiratory: Safety shower and eye bath. Mechanical exhaust required. Wear appropriate safety eyeware complying with approved standards to avoid exposure to liquid splashed, mists or dusts. Wear appropriate protective gloves and clothing to avoid exposure to the skin. Wear dust mask. General Hygiene Measures: Wash thoroughly after handling. 25. Physical and Chemical Properties Physical State: Solid-powder Color: White Odor: ph: Vapor Pressure: Vapor Density: Evaporation Rate: Viscosity: Boiling Point: Freezing/Melting Point: 26. Stability and Reactivity Stability: Stable Incompatibility with Various Substances: Strong oxidizing agents. Strong acids. Hazardous Decomposition Products: Posphorous oxides, Sodium oxides. Hazardous Polymerization: ITSI Biosciences, LLC/ Updated: January,

6 Will not occur. 27. Toxicological Information Route of Exposure Skin Contact: May cause skin irritation. Skin Absorption: May be harmful if absorbed through the skin. Eye Contact: May cause eye irritation. Inhalation: May be harmful if inhaled. Material may be irritation to mucous membranes and upper respiratory tract. Ingestion: May be harmful if swallowed. Signs and symptoms of Exposure: To the best of our knowledge, the chemicals, physicals, and toxicological properties have not been thoroughly investigated. 28. Ecological Information No information available. 29. Disposal Consideration Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste and must consult local and state waste regulations to comply with all requirements. 30. Transport Information This substance is considered to be non-hazardous for transport. 31. Regulatory Information U.S. Federal Regulations: SARA Listed: No TSCA Inventory Item: Yes 32. Other Information The information contained herein is believed to be accurate and represents the best information currently available to us. The supplier does not assume any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. ITSI Biosciences, LLC/ Updated: January,

7 33. Product and Company Information Trade Name: Buffer 3 Cat. No.: K Company: ITSI Biosciences 633 Napoleon Street Johnstown, PA Phone: Fax: ITSIPREP Material Safety Data Sheet 34. Composition, Information on Ingredients Name CAS # % Sodium Phosphate, monobasic <0.1 Sodium Phosphate, dibasic <0.18 Sodium Chloride < Hazards Identification HMIS Rating NFPA Rating 36. First Aid Measures After Eye Contact: Immediately flush eyes with plenty of water for at lease 15 minutes. Separate eye lids. Get medical attention. After Skin Contact: After Ingestion: Immediately wash skin with soap and plenty of water. Wash out mouth with water provided person is conscious. Call After Inhalation: 37. Fire Fighting Measures Suitable Extinguishing Agents: Remove to fresh air. If breathing becomes difficult, call a Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. ITSI Biosciences, LLC/ Updated: January,

8 Protective Equipment: Specific Hazard(s): Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Emits toxic fumes under fire conditions. 38. Accidental Release Measures Methods for Cleaning: 39. Handling and Storage Handling: Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. Avoid inhalation. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure. Storage: Keep container tightly closed. 40. Exposure Controls, Personal Protection Engineering Controls: Personal Protection: Eyes: Skin: Respiratory: Safety shower and eye bath. Mechanical exhaust required. Wear appropriate safety eyeware complying with approved standards to avoid exposure to liquid splashed, mists or dusts. Wear appropriate protective gloves and clothing to avoid exposure to the skin. Wear dust mask. General Hygiene Measures: Wash thoroughly after handling. 41. Physical and Chemical Properties Physical State: Solid-powder Color: White Odor: ph: Vapor Pressure: Vapor Density: Evaporation Rate: Viscosity: Boiling Point: Freezing/Melting Point: 42. Stability and Reactivity Stability: Stable Incompatibility with Various Substances: Strong oxidizing agents. Strong acids. ITSI Biosciences, LLC/ Updated: January,

9 Hazardous Decomposition Products: Posphorous oxides, Sodium oxides, Hydrogen chloride gas. Hazardous Polymerization: Will not occur. 43. Toxicological Information Route of Exposure Skin Contact: May cause skin irritation. Skin Absorption: May be harmful if absorbed through the skin. Eye Contact: May cause eye irritation, and redness due to abrasion. Inhalation: May be harmful if inhaled. Material may be irritation to mucous membranes and upper respiratory tract. Ingestion: May be harmful if swallowed. Signs and symptoms of Exposure: Ingestion of large amounts causes vomiting and diarrhea. Dehydration and congestion may occur I internal organs. Hypertonic salt solutions can produce inflammatory reactions in the gastrointestinal tract. 44. Ecological Information No information available. 45. Disposal Consideration Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste and must consult local and state waste regulations to comply with all requirements. 46. Transport Information This substance is considered to be non-hazardous for transport. 47. Regulatory Information U.S. Federal Regulations: SARA Listed: No TSCA Inventory Item: Yes 48. Other Information The information contained herein is believed to be accurate and represents the best information currently available to us. The supplier does not assume any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. ITSI Biosciences, LLC/ Updated: January,

Date Printed: 10/19/2004 Date Updated: 04/10/2004 Version 1.6 SODIUM PHOSPHATE MONOBASIC, ANHYDROUS SIGMA-ALDRICH ULTRA MINIMUM 99.

SIGMA-ALDRICH MATERIAL SAFETY DATA SHEET Date Printed: 10/19/2004 Date Updated: 04/10/2004 Version 1.6 Section 1 - Product and Company Information Product Name Product Number Brand SODIUM PHOSPHATE MONOBASIC,