SDS. GHS Safety Data Sheet. Blistex Inc. Blistex Lip Balm - Regular PRODUCT AND COMPANY IDENTIFICATION. Manufacturer

Transcription

1 of 5 PRODUCT AND COMPANY IDENTIFICATION Manufacturer 800 Swift Drive Oak Brook, IL Contact: Phone: Fax: Web: Environmental, Health and Safety Coordinator (630) (630) msds@blistex.com Product Name: Revision Date: Version: MSDS Number: 0/04/ R Reason for revision: General review and update Previous SDS number(s): R For emergency ONLY (spill, leak, fire, exposure or accident), call CHEMTREC at

2 2 HAZARDS IDENTIFICATION 2 of 5 Route of Entry: Target Organs: Inhalation: Skin Contact: Eye Contact: Ingestion: Skin, ingestion, mucus membranes Inhalation of vapors is not expected to cause any significant adverse effects. None Expected May Cause Irritation. Ingestion of small quantites is not expected to cause any significant adverse effects. NFPA: HMIS III: Health =, Fire =, Reactivity = 0 H/F/PH0 0 0

3 3 COMPOSITION/INFORMATION ON INGREDIENTS 3 of 5 Ingredients: None of the ingredients used in this product meet the definition of "Hazardous Chemical" as defined by OSHA 29CFR Consumer products regulated by the Food, Drug, and Cosmetics Act (when packaged for sale to consumers in a retail establishment) are exempt from all provisions of OSHA's Hazard Communications Standard. This exemption is provided within the Code of Federal Regulations, Title 29, Part (b)(6). Hazardous ingredients: NONE There are no known hazardous substances contained in this product. As per CFR Parts 20 & 2, specific ingredient information can be found in the product package labeling. 4 Inhalation: Skin Contact: Eye Contact: Ingestion: FIRST AID MEASURES If irritation or rash develops, stop use. Wash with luke warm water and mild soap. If condition does not improve in several days, seek medical assistance. Flush with luke warm water for 5 minutes. If discomfort or concerns arise, contact a physician or Poison Control Center. 5 FIRE FIGHTING MEASURES Flash Point: Flash Point Method: Burning Rate: Autoignition Temp: LEL: UEL: CO2, Dry Chemical, Foam 285 C Open Cup 6 ACCIDENTAL RELEASE MEASURES Use inert absorbent material to collect spilled product. Collect into appropriate containers, ready for disposal (see Section3).

4 7 HANDLING AND STORAGE 4 of 5 Handling Precautions: Storage Requirements: Keep in closed containers when in bulk form. Store at room temperature. 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Personal Protective Equip: Use NIOSH approved gloves and goggles when handling in raw, bulk form. 9 PHYSICAL AND CHEMICAL PROPERTIES Appearance: Physical State: Spec Grav./Density: Boiling Point: Vapor Pressure: ph: Waxy solid - Light Yellow Solid Odor: Solubility: Freezing/Melting Pt.: Vapor Density: Waxy Insoluble in water C 0 STABILITY AND REACTIVITY Stability: Conditions to Avoid: Materials to Avoid: Hazardous Decomposition: Hazardous Polymerization: Stable Intense heat - Freezing Oxidizing agents None None TOXICOLOGICAL INFORMATION Non-hazardous and non-toxic. Not classified as human carcinogen. 2 ECOLOGICAL INFORMATION At present there are no ecological assessment data available. Complete information is not yet available. No data is available on the adverse effects of this product on the environment. According to present knowledge no negative reactions are to be expected.

5 3 DISPOSAL CONSIDERATIONS 5 of 5 Dispose of in accordance with all applicable federal, state and local regulations. Not regulated. Non-hazardous. Packaging may be recycled. 4 TRANSPORT INFORMATION Not hazardous (DOT, IMDG, ICAO/IATA). Non-hazardous material, not DOT regulated. Non-regulated material (DOT, IMDG, ICAO/IATA). 5 REGULATORY INFORMATION When used as intended, all ingredients used in this product are safe and listed in the Cosmetics, Toiletries and Fragrance Association guidelines. California Prop. 65: None 6 OTHER INFORMATION MANUFACTURER DISCLAIMER: The information contained in this Material Safety Data Sheet has been compiled from sources which considers reliable and accurate to the best of 's knowledge. The information relates only to the specific product described above, and not to use of the product in combination with another material. Customers and other users should read this SDS and the product label carefully before using the product. neither assumes, nor authorizes anyone to assume on 's behalf, any liability in connection with the use of the information in this SDS. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable. However, each user should review these recommendations in line specific context of the intended use and determine whether they are appropriate.