LITEBOX 2x4 FRAME ASSEMBLY INSTRUCTIONS FOR LITEBOX TM 2X4, 1 DEEP AND LITEBOX TM 2X4, 6 DEEP CINEMA/TELEVISION LED LIGHTING FRAME SYSTEM

Transcription

1 TM TM LITEBOX 2x4 FRAME ASSEMBLY INSTRUCTIONS FOR LITEBOX TM 2X4, DEEP AND LITEBOX TM 2X4, 6 DEEP CINEMA/TELEVISION LED LIGHTING FRAME SYSTEM

2 LITEBOX 2x4 TM LITEBOX TM 2X4, 6 DEEP ASSEMBLY INSTRUCTIONS for LTA-LITEBOX-2X4-BOX6 PLEASE READ INSTRUCTIONS BEFORE ASSEMBLY

3 COMPONENT LIST White decal (4 required) Yellow decal (4 required) decal (4 required) decal (4 required) decal (4 required) (Qty 4) with Yellow Decal (Qty 4) with 06 Decal (Qty 4) with 24 Decal (Qty 4) with 48 Decal (Qty 4)

4 OPERATING LITEBOX FITTINGS Align pin to hole and slide fitting into tube Depress pin. 3 Push in fitting until pin snaps in place. 4 4 Fitting fully installed. REPLACING SNAP PINS 3 2 Squeeze clip. 3 Clip fully installed. 2 Insert clip.

5 ASSEMBLY - STEP (2x) decal (2 required) White decal (4 required) with 24 decal ASSEMBLY - STEP 2 (2x) decal (2 required) Yellow decal (4 required) with Yellow decal with 24 decal with Yellow decal

6 ASSEMBLY - STEP 3 (2x) Assembly from Step (2 required) decal (4 required) with 06 decal with 06 decal IMPORTANT Note orientation of Both s with 06 Decal ASSEMBLY - STEP 4 (2x) Assembly from Step 2 (2 required) Assembly from Step 3 (2 required) with Yellow Decal with Yellow Decal

7 Note: Rivet Heads face inward. ASSEMBLY - STEP 5 Assembly from Step 4 ( required) decal (4 required) White Velcro with 24 decal with 24 decal Black Velcro Black Velcro

8 Note: Rivet Heads face inward. ASSEMBLY - STEP 6 Assembly from Step 4 ( required) Assembly from Step 5 ( required) White Velcro

9 ASSEMBLY - COMPLETE Note: Rivet Heads face inward. White Velcro TM

10 LITEBOX 2x4 TM LITEBOX TM 2X4, DEEP ASSEMBLY INSTRUCTIONS for LTA-LITEBOX-2X4-BOX PLEASE READ INSTRUCTIONS BEFORE ASSEMBLY

11 COMPONENT LIST White decal (4 required) decal (2 required) decal (2 required) (Qty 4) with 24 Decal (Qty 2) with 48 Decal (Qty 2)

12 OPERATING LITEBOX FITTINGS Align pin to hole and slide fitting into tube Depress pin. 3 Push in fitting until pin snaps in place. 4 4 Fitting fully installed. REPLACING SNAP PINS Squeeze clip. Insert clip. 3 Clip fully installed.

13 ASSEMBLY - STEP decal ( required) White decal (2 required) with 24 decal ASSEMBLY - STEP decal ( required) White decal (2 required) with 24 decal

14 ASSEMBLY - STEP 3 with 48 decal Assembly from Step decal (2 required) with 48 decal ASSEMBLY - STEP 4 Assembly from Step 2 Assembly from Step 3

15 ASSEMBLY - COMPLETE Note: Rivet Heads face inward.

16 TM LITEGEAR, INC. Tel: support@litegear.com Web: litegear.com 207 LITEGEAR, INC. All rights reserved. LiteRibbon and FauxFlo are registered trademarks of LiteGear, Inc. 207 LITEGEAR, INC. All rights reserved. LiteGear, LiteMat, LiteDimmer, LiteStix, E-Control, Hybrid, Chroma, Chroma-Correct, LiteTile, LiteBox, LiteCloth, CineHue, CineMitter, Cine Chroma, Cine Series, Studio Series, Cine Hybrid, Studio Hybrid, FauxRes, LiteEngine, LiteNet, LitePower, LiteTenna, QuickLinx, TrueHybrid, Vibrant Colors, Beautifully Saturated, SkyMat, Stardust, and MapLite are trademarks of LiteGear, Inc. VELCRO is a registered trademark of Velcro BVBA