10XE AND 15XE Electric High-Pressure Washer
|
|
- Bethany Cooper
- 5 years ago
- Views:
Transcription
1 10XE AND 15XE Electric High-Pressure Washer JD-KLEEN ( ) Motor Specs: 10XE 15XE Pump Oil Grade: Pump Oil Capacity: Nozzle Size: 10XE 15XE 1.5 HP / 1 Phase / 120 Volts 2.0 HP / 1 Phase / 120 Volts John Deere Hy-Guard 6.5 oz mm 1.25 mm
2 This Parts Listing has been compiled for your benefit. You can be assured your John Deere Cold Water Pressure Washer was constructed and designed with quality and performance in mind using over 25 years experience in the pressure washer business. Each component has been rigorously tested to insure the highest level of acceptance. The contents of this Parts Listing are based on the latest product information available at the time of publication. John Deere reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, COLD WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine John Deere parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. NEVER make adjustments on machinery while the unit is connected to the power source. Turning over the machinery by hand during adjustment or cleaning might start the machinery, causing serious injury to the operator. 3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. 5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving. 2
3 Table of Contents SPECIFICATIONS...4 NOTES xe (usa) (BEFORE SERIAL # ) xe (usa) (AFTER SERIAL # ) & 15XE (USA) (AFTER SERIAL # ) XE (CANADA) (BEFORE SERIAL # ) XE (CANADA) (AFTER SERIAL # ) & 15XE (CANADA) (AFTER SERIAL # ) XE-C (USA) (BEFORE SERIAL # ) XE-C (USA) (AFTER SERIAL # ) XE-C (USA) (before SERIAL # ) XE-C (USA) (AFTER SERIAL # ) & 15XE-C (USA) (AFTER SERIAL # ) XE-C (CANADA) (BEFORE SERIAL # ) XE-C (CANADA) (AFTER SERIAL # ) XE-C (CANADA) (BEFORE SERIAL # ) XE-C (CANADA) (AFTER SERIAL # ) & 15XE-C (CANADA) (AFTER SERIAL # )...28 MOTOR ASSEMBLY ( & )...30 PUMP ASSEMBLY (3-0071)...32 UNLOADER (8-0493) & DETERGENT INJECTOR ( ) ASSEMBLY...34 GUN ASSEMBLY ( )...36 GUN/LANCE ASSEMBLY ( )...38 LANCE ASSEMBLY ( )...40 LANCE ASSEMBLY ( AND )...42 OPTIONAL CART ASSEMBLY (AW WK)...44 WIRING SCHEMATIC...46 WIRING Diagram...47
4 SPECIFICATIONS MODEL NuMBER 10XE 10XE-C 15XE 15XE-C Operating Pressure (PSI/Bar): 000/69 (- %) 00/0 (- %) Water Volume (GPM/lpm): 2.0/7.6 (+/- 5%) Motor: Totally enclosed fan cooled Horsepower Voltage Amps Phase RPM High Pressure Pump: Oil Type 20 Single 40 Direct Driven, Oil Bath, Triplex Piston John Deere Hy-Guard Oil Capacity (oz./liters) 6.5/.19 Plungers Manifold Valves Unloader Heat Dump Valve High Pressure Hose: Gun: Wand: Ceramic Forged Brass Stainless Steel Preset Relieves heated water during unloader bypass stage 3/8 inch I.D. x 25 ft. steel wire braided, oil and detergent resistant, quick connects Trigger with safety lock-off 6" total insulated length Nozzle: Variable high/low adjustable (0-60 ) unit Net Weight (Lbs/Kg) /24 00/0 /24 00/0 unit Shipping Weight (Lbs/Kg) 65/29.5 /2 65/29.5 /2 unit Net Dimension (In/Cm) 22Lx11Wx14.5H / 32Lx18Wx22.5H / 22Lx11Wx14.5H / 32Lx18Wx22.5H / 56Lx28Wx37H 81Lx45.75Wx57H 56Lx28Wx37H 81Lx45.75Wx57H unit Shipping Dimension (In/Cm) 24.5Lx13Wx16H / 33Lx21Wx24H / 24.5Lx13Wx16H / 33Lx21Wx24H / 62Lx33Wx40.5H 84Lx53Wx61H 62Lx33Wx40.5H 84Lx53Wx61H Warranty One () year limited parts Pump Five () years limited 4
5 NOTES SERIAL BREAK NUMBER: SERIAL BREAK EXPLANATION: # CD JUC ONLY: FRAME CHANGED FROM A33 TO A01. # CD JUC ONLY: FRAME CHANGED FROM A33 TO A01. # CD-1002/1502-1JCC ONLY: FRAME CHANGED FROM A33 TO A01. # CD-1002 UNITS ONLY: LANCE CHANGED FROM TO NOZZLE CHANGE FROM TO # CHANGED LANCE TO GUN CHANGED FROM TO
6 10xe (usa) (BEFORE SERIAL # ) CD JUH RD 6
7 CD-002-0JUH-090-RD 10XE (usa) (BEFORE SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Bolt Washer Isolator Bolt Base Plate -00A0 22 Elbow Locknut Relief Valve Bolt Heat Dump Valve Washer Bolt Decal- Caution/Important (See 4-90) N/A Sep. 26 Decal- Important: Pump Instructions (See ) N/A Sep. 8 Hang Tag- Warning: Risk of Electrocution Tag- Remove Red Plug Cable Tie Unloader Motor Assembly- 1.5 H.P. (U/L) Garden Hose Fitting Decal- On/Off Inlet Filter Decal- 0XE Quick Connect Socket Decal- Warning: Risk of Electrocution (See 4-90) N/A Sep. 2 O-ring (Replacement) Decal- Warning: Risk of Injection/Explosion (See 4-90) N/A Sep. Quick Connect Plug Decal- Date Plate N/A 4 High Pressure Hose Key Gun w/screw Lance Pump Variable Nozzle Assembly- 1.40mm Grip Decal- Adjustable Nozzle (See ) N/A Sep. 9 Handle A01 Safetey Decal Kit (Inc. 7, 13-14, 26, 37)
8 10xe (usa) (AFTER SERIAL # ) & 15XE (USA) (AFTER SERIAL # ) CD-1002/1502-0JUH JJT 8
9 CD-002/02-0JUH-008-JJT AC-1000E (usa) (AFTER SERIAL # ) & AC-1500E(uSA) (AFTER SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Unloader Motor Assembly- 1.5 HP (AC-1000E) Garden Hose Fitting Motor Assembly- 2.0 HP (AC-1500E) Inlet Filter Decal- On/Off (See 4-90) N/A Sep. 4 Quick Connect Socket Decal- Warning: Risk of Electrocution (See ) N/A Sep. O-ring (Replacement Only) Decal- AC-000E Logo Bolt Decal- AC-00E Logo Lockwasher Decal- Warning: Risk of Injection/Explosion (See ) N/A Sep. 8 Thermal Relief Valve Decal- Date Plate N/A 9 Pump Decal- Adjustable Nozzle (See ) N/A Sep. 0 Pop-Off Valve Lance w/variable Nozzle 1.40mm (AC-1000E) 6-04 Elbow Lance w/variable Nozzle 1.25mm (AC-1500E) Key Gun w/lance Baseplate -00A Handle Grip Bolt Handle Assembly A51 Bolt Quick Connect Plug Isolator High Pressure Hose Locknut Tag- Remove Red Plug Washer Decal- Important Pump Instructions (See 4-90) N/A Sep. 9 Decal- Caution/Important (See 4-90) N/A Sep. 37 Bolt Hang Tag- Warning: Risk of Electrocution (E/F/S) 4-0 Safety Decal Kit (Inc. 19, 23-24, 26, 28, 36) Cable Tie *Must Order in One Foot Lengths 9
10 10XE (CANADA) (BEFORE SERIAL # ) cd jch rd 10
11 CD JCH RD 10XE (CANADA) (BEFORE SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Bolt Washer Isolator Bolt Base Plate -00A0 2 Elbow Locknut Relief Valve Bolt Heat Dump Valve Washer Bolt Decal- Warning: Backflow (See ) N/A Sep. 27 Decal- Important: Pump Instructions (See ) N/A Sep. 8 Decal- Caution/Important (See 4-90) N/A Sep. 28 Tag- Remove Red Plug Hang Tag- Warning: Risk of Electrocution Unloader Cable Tie Garden Hose Fitting Motor Assembly- 1.5 H.P. (C-U/L) Inlet Filter Decal- On/Off Quick Connect Socket Decal- Warning: Risk of Electrocution (See 4-90) N/A Sep. O-ring (Replacement) Decal- 0XE Quick Connect Plug Decal- Warning: Risk of Injection/Explosion (See ) N/A Sep. High Pressure Hose Decal- Data Plate N/A 6 Gun w/screw Lance Key Variable Nozzle Assembly- 1.40mm Pump Decal- Adjustable Nozzle (See ) N/A Sep. 9 Grip Safety Decal Kit (Inc. 7-8, 12-13, 15, 27, 38) Handle A01 11
12 10XE (CANADA) (AFTER SERIAL # ) & 15XE (CANADA) (AFTER SERIAL # ) cd-1002_1502-0jch jjf 12
13 CD-002/02-0JCH-060-JJF AC-1000E (CANADA) (AFTER SERIAL # ) & AC-1500E (CANADA) (AFTER SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Unloader Motor Assembly- 1.5 HP (AC-1000E) Garden Hose Fitting Motor Assembly- 2.0 HP (AC-1500E) Inlet Filter Decal- On/Off (See 4-90) N/A Sep. 4 Quick Connect Socket Decal- Warning: Risk of Electrocution (See ) N/A Sep. O-ring (Replacement Only) Decal- AC-000E Logo Bolt Decal- AC-00E Logo Lockwasher Decal- Warning: Risk of Injection/Explosion (See ) N/A Sep. 8 Thermal Relief Valve Decal- Date Plate N/A 9 Pop-Off Valve Decal- Adjustable Nozzle (See ) N/A Sep. 0 Elbow Lance w/variable Nozzle 1.40mm (AC-1000E) 6-04 Key Lance w/variable Nozzle 1.25mm (AC-1500E) Baseplate -00A0 0 Gun w/lance Bolt Handle Grip Bolt Handle Assembly A01 Isolator Quick Connect Plug Locknut High Pressure Hose Washer Pump Decal- Warning: Backflow (See ) N/A Sep. 6 Decal- Important Pump Instructions (See 4-90) N/A Sep. 9 Decal- Caution/Important (See 4-90) N/A Sep. 37 Tag- Remove Red Plug Hang Tag- Warning: Risk of Electrocution (E/F/S) Bolt Cable Tie Safety Decal Kit (Inc , 23, 24, 26, 28, 36) 4-90 *Must Order in One Foot Lengths 13
14 10XE-C (USA) (BEFORE SERIAL # ) cd juc rd 14
15 CD-002-JUC-020-RD 10XE-C (usa) (BEFORE SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Handle A33 2 Decal- Warning: Risk of Electrocution Nylock Nut Decal- Warning: Risk of Injection/Explosion Bolt Decal- Serial Number N/A 4 Nylock Nut Decal- U/L Specs N/A Knob Decal- Date Code N/A 6 Adjustable Knuckle w/o Hex Key Adjustable Knuckle w/ Hex Pump Bolt Washer Frame -08A Bolt Washer Elbow Wheel Relief Valve Hub Cap Heat Dump Valve Isolator Decal- Important Pump Instructions Washer Tag- Remove Red Plug Screw Unloader Decal- John Deere Logo Garden Hose Fitting Bolt Inlet Filter Washer Quick Connect Socket Locknut O-ring (Replacement) Decal- Caution/Important Quick Connect Plug Hang Tag- Warning: Risk of Electrocution High Pressure Hose Cable Tie Gun w/ Screw Lance Motor Assembly-1.5 H.P. (U/L) Variable Nozzle Assemlby- 1.40mm Decal- On/Off Decal- Adjustable Nozzle
16 10XE-C (USA) (AFTER SERIAL # ) 10XE POWERWASH cd juc rd 16
17 CD-002-JUC-202-RD 10XE-C (usa) (AFTER SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Locknut Decal- Warning: Risk of Injection/Explosion (See ) N/A Sep. 2 Isolator Decal- Date Plate N/A Washer Key Bolt Pump Axle Spacer A Washer Washer Bolt Wheel Elbow Hub Cap Pop-off Valve Axle Thermal Relief Valve Frame -048A0 Decal- Important Instructions (See 4-90) N/A Sep. Bolt Tag- Remove Red Plug Knob Unloader Handle Assembly A01 6 Garden Hose Swivel Bolt Inlet Filter Washer Quick Connect Socket Locknut O-ring (Replacement Only) Decal- Caution/Important (See 4-90) N/A Sep. 40 Quick Connect Plug Hang Tag- Warning: Risk of Electrocution (E/F/S) High Pressure Hose Cable Tie Gun w/lance Motor Assembly- 1.5 H.P Variable Nozzle Assembly Decal- On/Off (See 4-90) N/A Sep. 44 Decal- Adjustable Nozzle (See ) N/A Sep. 22 Decal- 0XE Decal- John Deere Logo Decal- Warning: Risk of Electrocution (See ) N/A Sep. Safety Decal Kit (Inc , 22, 24-25, 34, 45)
18 15XE-C (USA) (before SERIAL # ) cd juc rd 18
19 CD-02-JUC-020-RD 15XE-C (usa) (BEFORE SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Handle A33 2 Decal- Warning: Risk of Electrocution Nylock Nut Decal- Warning: Risk of Injection/Explosion Bolt Decal- Serial Number N/A 4 Nylock Nut Decal- U/L Specs N/A Knob Decal- Date Code N/A 6 Adjustable Knuckle w/o Hex Key Adjustable Knuckle w/ Hex Pump Bolt Washer Frame -08A Bolt Washer Elbow Wheel Relief Valve Hub Cap Heat Dump Valve Isolator Decal- Important Pump Instructions Washer Tag- Remove Red Plug Screw Unloader Decal- John Deere Logo Garden Hose Fitting Bolt Inlet Filter Washer Quick Connect Socket Locknut O-ring (Replacement) Decal- Caution/Important Quick Connect Plug Hang Tag- Warning: Risk of Electrocution High Pressure Hose Cable Tie Gun w/ Screw Lance Motor Assembly-2.0 H.P. (U/L) Variable Nozzle Assembly- 1.25mm Decal- On/Off Decal- Adjustable Nozzle
20 10XE-C (USA) (AFTER SERIAL # ) & 15XE-C (USA) (AFTER SERIAL # ) cd-1002_1502-1juc jjf 20
21 CD-002/02-JUC-0260-JJF 10XE-C (usa) (AFTER SERIAL # ) & 15XE-C (usa) (AFTER SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Unloader Carriage Bolt Garden Hose Fitting Handle Assembly A01 Inlet Filter Decal- Logo Quick Connect Socket Motor Assembly- 1.5 HP (10XE-C) O-ring (Replacement Only) Motor Assembly- 2.0 HP (15XE-C) Thermal Relief Valve Decal- On/Off (See 4-90) N/A Sep. 7 Pop-Off Valve Decal- Warning: Risk of Electrocution (See ) N/A Sep. 8 Elbow Decal- 0XE Logo Bolt Decal- XE Logo Washer Decal- Warning: Risk of Injection/Explosion (See ) N/A Sep. Locknut Decal- Date Plate N/A 2 Decal- Caution/Important (See 4-90) N/A Sep. Decal- Adjustable Nozzle (See ) N/A Sep. Hang Tag- Warning: Risk of Electrocution (E/F/S) Lance w/variable Nozzle 1.40mm (10XE-C) Cable Tie Lance w/variable Nozzle 1.25mm (15XE-C) Isolator Gun w/lance (10XE) Washer Quick Connect Plug Bolt High Pressure Hose Locknut Key Axle Spacer A0 2 4 Pump Washer Lockwasher Wheel Bolt Hub Cap Decal- Important Pump Instructions (See 4-90) N/A Sep. 2 Axle Tag- Remove Red Plug Frame Assembly -048A0 Safety Decal Kit (Inc. 12, 30-31, 33, 35, 44) Knob *Must Order in One Foot Lengths 21
22 10XE-C (CANADA) (BEFORE SERIAL # ) cd jcc rd 22
23 CD-002-JCC-2099-RD 10XE-C (CANADA) (BEFORE SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Handle A33 26 Decal- Warning: Risk of Electrocution (E/F) Nylock Nut Decal- Warning: Risk of Injection/Explosion (E/F) 4-06 Bolt Decal- Serial Number N/A 4 Nylock Nut Decal- C-U/L Specs N/A Knob Decal- Date Code N/A 6 Adjustable Knuckle w/o Hex Key Adjustable Knuckle w/ Hex Pump Bolt Washer Frame -08A 4 Bolt Washer Elbow Wheel Relief Valve Hub Cap Heat Dump Valve Isolator Decal- Important Pump Instructions (E/F) Washer Tag- Remove Red Plug Screw Unloader Decal- John Deere Logo Tag- Water Supply Inlet Bolt Garden Hose Fitting Washer Inlet Filter Locknut Quick Connect Socket Decal- Warning: Backflow (E/F) O-ring (Replacement) Decal- Caution/Important (E/F) Quick Connect Plug Hang Tag- Warning: Risk of Electrocution (E/F) High Pressure Hose Cable Tie Gun w/ Screw Lance Motor Assembly- 1.5 H.P. (C-U/L) Variable Nozzle Assemlby- 1.40mm Decal- On/Off Decal- Adjustable Nozzle (E/F)
24 10XE-C (CANADA) (AFTER SERIAL # ) 10XE POWERWASH cd jcc rd 24
25 CD-002-JCC-202-RD 10XE-C (CANADA) (AFTER SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Locknut Decal- Warning: Risk of Injection / Explosion (See ) N/A Sep. 2 Isolator Decal- Data Plate N/A Washer Key Bolt Pump Axle Spacer A Washer Washer Bolt Wheel Elbow Hub Cap Pop-Off Axle Heat Dump Valve Frame Assembly -048A0 4 Decal- Important Instructions (See 4-90) N/A Sep. Bolt Tag- Remove Red Plug Knob Unloader Handle Assembly A01 37 Garden Hose Swivel Bolt Inlet Filter Washer Quick Connect Socket Locknut O-ring (Replacement Only) Decal- Warning: Back Flow (See ) N/A Sep. 4 Quick Connect Plug Decal- Caution / Important (See 4-90) N/A Sep. 42 High Pressure Hose Hang Tag- Warning: Risk of Electrocution Gun w/ Lance Cable Tie Variable Nozzle Assembly Motor Assembly Decal- Adjustable Nozzle (See ) N/A Sep. 22 Decal- On / Off (See 4-90) N/A Sep. 46 Decal- John Deere Logo Decal- 0XE Safety Decal Kit (Inc , 22, 24-25, 34, 45) Decal- Warning: Risk of Electrocution (See ) N/A Sep. 25
26 15XE-C (CANADA) (BEFORE SERIAL # ) cd jcc rd 26
27 CD-02-JCC-2099-RD 15XE-C (CANADA) (BEFORE SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Handle A33 26 Decal- Warning: Risk of Electrocution (E/F) Nylock Nut Decal- Warning: Risk of Injection/Explosion (E/F) 4-06 Bolt Decal- Serial Number N/A 4 Nylock Nut Decal- C-U/L Specs N/A Knob Decal- Date Code N/A 6 Adjustable Knuckle w/o Hex Key Adjustable Knuckle w/ Hex Pump Bolt Washer Frame -08A 4 Bolt Washer Elbow Wheel Relief Valve Hub Cap Heat Dump Valve Isolator Decal- Important Pump Instructions (E/F) Washer Tag- Remove Red Plug Screw Unloader Decal- John Deere Logo Garden Hose Fitting Bolt Inlet Filter Washer Quick Connect Socket Locknut O-ring (Replacement) Decal- Warning: Backflow (E/F) Quick Connect Plug Decal- Caution/Important (E/F) High Pressure Hose Hang Tag- Warning: Risk of Electrocution (E/F) Gun w/ Screw Lance Cable Tie Variable Nozzle Assembly- 1.25mm Motor Assembly- 2.0 HP (C-U/L) Decal- Adjustable Nozzle (E/F) Decal- On/Off
28 10XE-C (CANADA) (AFTER SERIAL # ) & 15XE-C (CANADA) (AFTER SERIAL # ) cd-1002_1502-1jcc jjf 28
29 CD-002/02-JCC-0260-JJF 10XE-C (CANADA) (AFTER SERIAL # ) & 15XE-C (CANADA) (AFTER SERIAL # ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Unloader Knob Garden Hose Fitting Carriage Bolt Inlet Filter Handle Assembly A01 4 Quick Connect Socket Decal- Logo 4-02 O-ring (Replacement Only) Motor Assembly- 1.5 HP (10XE-C) Thermal Relief Valve Motor Assembly- 2.0 HP (15XE-C) Pop-Off Valve Decal- On/Off (See 4-90) N/A Sep. 8 Elbow Decal- Warning: Risk of Electrocution (See ) N/A Sep. 9 Bolt Decal- 0XE Logo Washer Decal- XE Logo Locknut Decal- Warning: Risk of Injection/Explosion (See ) N/A Sep. 2 Decal- Warning: Backflow (See ) N/A Sep. Decal- Date Plate N/A Decal- Caution/Important (See 4-90) N/A Sep. 6 Decal- Adjustable Nozzle (See ) N/A Sep. 4 Hang Tag- Warning: Risk of Electrocution (E/F/S) Lance w/variable Nozzle 1.40mm (10XE-C) 6-04 Cable Tie Lance w/variable Nozzle 1.25mm (15XE-C) Isolator Gun w/lance Washer Quick Connect Plug Bolt High Pressure Hose Locknut Key Axle Spacer A Pump Washer Lockwasher Wheel Bolt Hub Cap Decal- Important Pump Instructions (See 4-90) N/A Sep. 24 Axle Tag- Remove Red Plug Frame Assembly -048A0 Safety Decal Kit (Inc , 31-32, 34, 36, 45s) 4-90 *Must Order in One Foot Lengths 29
30 MOTOR ASSEMBLY ( & ) DLG 30
31 DLG MOTOR ASSEMBLY ( & ) REF. # DESCRIPTION PART # QTY. Hex Screw Motor Box O-ring Terminal Switch for (15 Amp) Switch for (20 Amp) Crimp Splice Starting Capacitor for Starting Capacitor for Running Capacitor Lockwasher Strain Relief GFCI Cord for (15 Amp) GFCI Cord for (20 Amp) Motor Box Strap Motor- 1.5 H.P. (See ) N/A Sep. - Motor- 2.0 H.P. (See ) N/A Sep. Complete Motor Assembly (Inc. 1-13) Complete Motor Assembly (Inc. 1-13)
32 PUMP ASSEMBLY (3-0071) KZ 32
33 KZ PuMP ASSEMBLY (3-0071) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Crankcase Washer Plug Plunger- Ceramic O-ring O-ring Drip Pan Back-up Ring 2-04 Oil Seal 26-0 Washer Plug Conecting Rod Manifold- Brass Crankcase Cover Lockwasher Bolt Bolt Cover O-ring O-ring (See ) N/A Sep. 6 6 Connecting Rod Valve Seat (See ) N/A Sep Piston Guide Valve Plate (See ) N/A Sep. 6 8 Bolt Valve Spring (See ) N/A Sep. 6 9 Lockwasher Valve Cage (See ) N/A Sep Flange O-ring Lockwasher Valve Plug Bolt Valve Assembly (Includes 0-4) (See ) N/A Sep. 6 4 Bearing Spacer Head Ring (See ) N/A Sep. 44 O-ring V-packing (See ) N/A Sep. 4 Oil Seal V-packing Retainer Snap Ring O-ring Ball Bearing O-ring Crankshaft Oil Level Indicator Valve Kit (Includes 3 each 10-14, 17) Bearing V-packing Kit (Includes 3 each 18-19, 21-22) Oil Dip Stick V-packing Assembly (Includes 18-22) Nut
34 UNLOADER (8-0493) & DETERGENT INJECTOR ( ) ASSEMBLY rd 34
35 RD unloader (8-0493) & DETERGENT INJECTOR ( ) ASSEMBLY REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Adjusting Cap O-ring Spring Connector Spring Retainer Bypass Fitting N/A 4 Piston Stem O-ring Back-up Ring Flow Balancer O-ring (See ) N/A Sep. 26 Spring Set Screw Detergent Injector- 1.80mm Locknut Orifice- 1.80mm Piston Retainer Injector Body N/A 0 O-ring (See ) N/A Sep. 0 Spring (See ) N/A Sep. O-ring (See ) N/A Sep. Ball (See ) N/A Sep. 2 Back-up Ring O-ring (See ) N/A Sep. Washer 8-04 Piston Retainer N/A 4 Washer Spring Connector O-ring (See ) N/A Sep. 6 Body N/A 6 Barb Valve and Ball Assembly Adjustable Knob Bypass Seat Unloader Repair Kit (Inc. 4-6, 10-12, 17-19, 21) O-ring Injector Repair Kit (Inc , 35) Bypass Fitting N/A 35
36 GUN ASSEMBLY ( ) RD 36
37 RD GuN ASSEMBLY ( ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Screw Seat (See ) N/A Sep. 2 Plastic Housing- Left Side O-ring (See ) N/A Sep. Housing Pin (See ) N/A Sep. 4 Pipe Washer (See ) N/A Sep. Coupler O-ring (See ) N/A Sep. 6 Trigger Safety Lock Back-up Ring (See ) N/A Sep. 7 Trigger Rest Gun/Wand Connector Trigger Pipe Trigger Pin Wand Protector Plastic Housing- Right Side Plastic Screw Connector 6-08 Plug (See ) N/A Sep. 2 Quick Connect O-ring (See ) N/A Sep. Gun Kit (Includes 11-20) Spring (See ) N/A Sep. Complete Gun Assembly (Inc. 1-25) Ball (See ) N/A Sep. 37
38 GUN/LANCE ASSEMBLY ( ) JJF 38
39 JJF GuN/LANCE ASSEMBLY ( ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Gun Body (Right Side) O-ring (See ) N/A Sep. 2 Pin Ball (See ) N/A Sep. Pin 4-0 Spring Ball (See ) N/A Sep. 4 Trigger Lock Female Inlet Trigger Pipe Pin (See ) N/A Sep. 8 Screw Plug Gun Body (Left Side) O-ring N/A 20 Body Backup Ring (See ) N/A Sep. 2 Pipe O-ring (See ) N/A Sep. 22 External Body 6-04 Plug Screw Connect Coupling Seat (See ) N/A Sep. Gun Repair Kit (Inc. 6, 7, 9, 10, 12-15)
40 LANCE ASSEMBLY ( ) RD 40
41 RD LANCE ASSEMBLY ( ) REF. # DESCRIPTION PART # QTY. O-ring Quick Connect Screw Connector Pipe Wand Protector Collar Nozzle Body O-ring Back-up Ring O-ring 2-04 Nozzle- 1.25mm Sleeve N/A O-ring Nozzle Assembly Pin Housing N/A 6 O-ring Nozzle Angle Plate Nozzle Protector Identification Pin- 1.25mm
42 LANCE ASSEMBLY ( AND ) DLG 42
43 6-08_6-042_4-080-DLG LANCE ASSEMBLY ( AND ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Nozzle Assembly (Inc. 2-15) Plastic Housing (See ) N/A Sep. 2 Nozzle Body O-ring Back-up Ring Angle Plate O-ring Nozzle Protector 8-0 O-ring 2-04 I.D. Pin- 1.25mm Back-up Ring I.D. Pin- 1.40mm Nozzle- 1.25mm Coupling Nozzle- 1.40mm Pipe Sleeve (See ) N/A Sep. Repair Kit (Inc. 4-6, 13) O-ring Complete Lance Assembly mm (Inc. 1-17) Pin Complete Lance Assembly mm (Inc. 1-17)
44 OPTIONAL CART ASSEMBLY (AW WK) RD 44
45 RD OPTIONAL CART ASSEMBLY (AW WK) REF. # DESCRIPTION PART # QTY. Handle Drive Screw Adjustable Upper Joint Adjustable Lower Joint Bolt Frame Washer Wheel Hub Cap Locknut Locknut Knob Isolator Washer Screw
46 WIRING SCHEMATIC OMCWU189s dce 46
47 WIRING Diagram OMCWU189d dce 47
48 Copyright 2006, John Deere 48 Manufactured for Deere & Company Moline, Illinois Pressure Washer
PARTS LIST FOR WC-100-0ME3 WATER CANNON. Copyright 2000, Mi-T-M Corporation Issue Date:
PARTS LIST FOR WC-100-0ME3 WATER CANNON Congratulations on the purchase of your new Mi-T-M Water Cannon! This parts listing has been complied for your benefit. You can be assured your Mi-T-M Water Cannon
More informationPARTS LIST FOR WC-150-0ME3 WATER CANNON. Copyright 2000, Mi-T-M Corporation Issue Date:
PARTS LIST FOR WC-150-0ME3 WATER CANNON Congratulations on the purchase of your new Mi-T-M Water Cannon! This parts listing has been complied for your benefit. You can be assured your Mi-T-M Water Cannon
More informationOperating Instructions
SPIN-PULL THREADED INSERT TOOL Operating Instructions Read All Safety Rules and Instructions Carefully Save this manual for Future Reference Complete Seal Kit IMPORTANT SAFETY WARNINGS: THE SAFETY WARNINGS
More informationOperating Instructions
SPIN-PULL THREADED INSERT TOOL Operating Instructions Read All Safety Rules and Instructions Carefully Save this manual for Future Reference IMPORTANT SAFETY WARNINGS: THE SAFETY WARNINGS BELOW CANNOT
More informationPart No Revised April Sno Konette. Instruction Manual. Deluxe Model #1002S Standard Model #1003S. Cincinnati, OH USA
Sno Konette Part No 67933 Revised April 2009 Instruction Manual Deluxe Model #1002S Standard Model #1003S Cincinnati, OH 445241-4807 USA Sno-Konette SAFETY PRECAUTIONS INSTALLATION 2 Sno-Konette MACHINE
More informationTopdresser 1800 Workman
Form Number 3354-400 Rev A Topdresser 1800 Workman 3000/4000 Model No. 44225-260000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity,
More informationCyclone Sand Pro Debris Blower. Parts Catalog. Form Number Model No and up.
Form Number 3351-356 Cyclone Sand Pro 1000 Debris Blower Model No. 08857-240000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity,
More informationShaveMaster II. Block Ice Shaver Instruction Manual Model #1005. Cincinnati, OH USA. Part No Revised June 1996
Block Ice Shaver Instruction Manual Model #1005 Part No. 12354 Revised June 1996 Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS HOW TO OPERATE THE SHAVEMASTER II MAIN SHAFT Rotates when motor is "ON".
More informationPart No Revised: June Sno-King. Instruction Manual Model #1888. Cincinnati, OH USA
Part No. 12666 Revised: June 2009 Instruction Manual Model #1888 Cincinnati, OH 45241-4807 USA Safety Precautions Sno-King 2 Forward This manual covers the Sno-King Ice Shaver Machine, model number 1888.
More informationREVOLUTION M SERIES MANUAL & PARTS GUIDE
HP-M1 HP-M2 REVOLUTION M SERIES MANUAL & PARTS GUIDE NEED ASSISTANCE? If you have any issues with this product, call Iwata-Medea before returning to your place of purchase. 503-253-7308 Congratulations
More informationQuarter-Turn Reverse Parts Manual
1.8 (45mm), 2 (55mm), 2 1/2 (65mm), 3 (76mm), 3 1/3 (85mm) Quarter-Turn Reverse Parts Manual VHH180/VHH180RT Serial No. 180001- VHH200/VHH200RT Serial No. 110001- VHH250/VHH250RT Serial No. 210001- VHH300/VHH300RT
More informationSECTION UNDERGROUND DUCTS AND RACEWAYS FOR ELECTRICAL SYSTEMS: CONDUIT SYSTEMS FOR USE IN CORROSIVE ENVIRONMENTS
SECTION 16130 UNDERGROUND DUCTS AND RACEWAYS FOR ELECTRICAL SYSTEMS: CONDUIT SYSTEMS FOR USE IN PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Furnishing, installation, and assembly of PVC coated electrical
More informationPositive-Turn Reverse Parts Manual
2 (55mm), 2 1/2 (65mm), 2 1/2 Short (65mm), 3 (76mm), 4 (100mm), 5 1/8 (130mm) Positive-Turn Reverse Parts Manual P1.07 VPT200 Serial No. 110001- VPT250 Serial No. 210001- VPT250 Short Serial No. 210001-
More informationBEFORE OPERATING THE UNIT, MUST CAREFULLY READ AND UNDERSTAND THIS MANUAL RETAIN THIS MANUAL FOR FUTURE REFERENCE IBEAR PEDICURE SPA OWNER S MANUAL
ibear Pipe-less Whirlpool Spa BEFORE OPERATING THE UNIT, MUST CAREFULLY READ AND UNDERSTAND THIS MANUAL RETAIN THIS MANUAL FOR FUTURE REFERENCE IBEAR PEDICURE SPA OWNER S MANUAL IBEAR WHIRLPOOL SPA by
More informationLiner Take-Up Option/Maintenance Kit
Liner Take-Up Option/Maintenance Kit Installation Instructions This kit includes the parts and documentation necessary to install the Liner Take-up option/maintenance kit into the following printers: ZM400
More informationCartridge Machine USER MANUAL
Cartridge Machine USER MANUAL 2018 INDEX Machine Overview 3 The Grip 4 The Body 5 The GiveKnob 6 Adjust the Give 7 Replacing the GiveKnob 8 The MotorBolt System 9 Changing the Stroke Wheel 10 Detaching
More informationNeon LED Signs. Created by John Park. Last updated on :11:09 PM UTC
Neon LED Signs Created by John Park Last updated on 2018-08-22 04:11:09 PM UTC Guide Contents Guide Contents Overview Parts Materials Tools Build the Sign Driver Preparation Solder the Circuit Solder the
More informationSmart Edge / Smart Edge Pro
Smart Edge / Smart Edge Pro XF8500 XF8700 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.productregister.co.uk/remington. You must register within 28 days of
More informationPowerSeries Aqua. 10,000 prize draw. Register online for PR1350 PR1370. EXTRA year guarantee FREE rewards gallery
PowerSeries Aqua PR1350 PR1370 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.remington.co.uk/productregister You must register within 28 days of purchase. Thank
More informationIS 35 IWATA NINJA JET OPERATING INSTRUCTION MANUAL
IS 35 IWATA NINJA JET OPERATING INSTRUCTION MANUAL NEED ASSISTANCE If you have any issues or warranty service questions, contact your local ANEST IWATA affiliate before returning to your place of purchase.
More informationi-twin Trim Dual Blade Rechargeable Trimmer
i-twin Trim Dual Blade Rechargeable Trimmer Model VSM2A SAFETY CAUTIONS WARNING! Polythene bags over the product or packaging may be dangerous. To avoid danger of suffocation, keep away from babies and
More informationGenesis Spa. Technician Comfort. G e n e s i s Pedicure Spa
Product Catalog GENESIS Genesis Spa Raising the standards for Technician Comfort The Genesis provides the comfort and luxury your clients will love, with the ease of use your technicians need. The seat
More informationFoot and Calf Massager Model Number: FCM1000
Foot and Calf Massager Model Number: FCM1000 INSTRUCTION MANUAL Welcome Congratulations on choosing to buy a Visage product. All products brought to you by Visage are manufactured to the highest standards
More informationHyperFlex Aqua. 10,000 prize draw. Register online for XR1430 XR1450 XR1470. EXTRA year guarantee FREE rewards gallery
HyperFlex Aqua XR1430 XR1450 XR1470 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.remington.co.uk/productregister. You must register within 28 days of purchase.
More informationINSTALLATION AND ROUGH-IN INFORMATION
INSTALLATION AND ROUGH-IN INFORMATION IMPORTANT - This sheet MUST accompany each Installation Drawing IMPORTANT: Echo / Vantage or Echo Plus / Vantage Plus Pedicure Chairs MUST be installed by a licensed
More informationCongratulations on your purchase of a. airbrush.
NEO SERIES MANUAL Congratulations on your purchase of a airbrush. CN GRAVITY-FEED DUAL-ACTION AIRBRUSH BCN SIPHON-FEED DUAL-ACTION AIRBRUSH 2 3 ASSEMBLY 1. Screw the airhose onto the airbrush (Iwata airhose
More informationPOWERGLIDE TITANIUM FEATURES
Model 7448TU POWERGLIDE TITANIUM The BaByliss for Men PowerGlide Titanium offers precision honed titanium cutting blades and mains operation for continuous high power to deliver an ultra smooth hair cut
More information10,000 prize draw. Register online for HC5800 HC5600 HC5400. EXTRA year guarantee FREE rewards gallery
3 HC5800 HC5600 HC5400 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.productregister.co.uk/remington. You must register within 28 days of purchase. Thank you
More information28145_HKVAC_IB 9/1/05 10:14 AM Page 1 VACUUM TRIM. Use and Care Guide HKVAC-2000
28145_HKVAC_IB 9/1/05 10:14 AM Page 1 VACUUM TRIM REVOLUTIONARY TRIMMING TECHNOLOGY Use and Care Guide HKVAC-2000 28145_HKVAC_IB 9/1/05 10:14 AM Page 2 IMPORTANT SAFETY INSTRUCTIONS Read all instructions
More informationArtesian Pedicure System
Installation Requirements Installation of the Collins pedicure unit is straightforward and comparable to installation of a residential hot tub or whirlpool. The utility requirements are as follow: 1 ½
More informationTradition, Innovation and Excellence
Tradition, Innovation and Excellence Our airbrush range is worthy of your attention: it has been chosen by some of the top and renowned artists in the world. Artists trust IWATA because they know they
More informationCoffee Detonator: The TNT Plunger Grinder
Coffee Detonator: The TNT Plunger Grinder Created by John Park Last updated on 2017-04-12 08:04:36 PM UTC Guide Contents Guide Contents Overview Materials Voltage Conversion AC/DC Voltage Divider Microcontroller
More informationCongratulations on your purchase of a. airbrush. CN GRAVITY-FEED DUAL-ACTION AIRBRUSH. color cup. main lever. needle cap. nozzle cap.
NEO SERIES MANUAL Congratulations on your purchase of a airbrush. color cup needle cap CN GRAVITY-FEED DUAL-ACTION AIRBRUSH main lever nozzle cap handle TO AIRBRUSH CN GRAVITY-FEED DUAL-ACTION AIRBRUSH
More informationSpecially designed to create multiple styles with one powerful tool! Instruction & Styling Guide. 5-in-1 Styling Kit
Specially designed to create multiple styles with one powerful tool! SERVICE CENTre: Conair Consumer Products Inc. 100 Conair Parkway Woodbridge, ON L4H 0L2 1-800-472-7606 www.conaircanada.ca 2008 Conair
More information5-in-1 Styling Kit. Specially designed to create multiple styles with one powerful tool! Instruction & Styling Guide
Specially designed to create multiple styles with one powerful tool! SERVICE CENTre: Conair Consumer Products Inc. 100 Conair Parkway Woodbridge, ON L4H 0L2 1-800-472-7606 www.conaircanada.ca 2009 Conair
More informationHAIRCUT KIT. 2 YEAR WARRANTY HC1090 Series USE & CARE MANUAL. To register your product go to PLEASE READ PRIOR TO USE
HAIRCUT KIT USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to www.remington-products.com.au 2 YEAR WARRANTY HC1090 Series IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances,
More informationVALUE, QUALITY & PERFORMANCE distinguish these airbrushes!
BS If it s quality your looking for then Iwata will deliver straight from the box with no tweaking required with absolute excellence that comes from the Iwata product. What about parts, Airbrush Megastore
More informationAirbrush. Price List
Airbrush Price List 2015 SHORT PAINT PASSAGE The gravity fed airbrushes have a very short fluid passage, easy to clean and simple to maintain. MAIN LEVER Incredibly smooth feel. ANTI CORROSIVE PROTECTIVE
More informationAssembly Instructions
ssembly Instructions ODU MINI-SNP ssembly Instruction ssembly Instruction For unsealed Connectors Series L (IP 50) Solder insertes Collet Back nut. Slide Back nut and Collet over the cable. Solder iron
More informationGMT180WTPBCSC BEARD/MUSTACHE TRIMMER
GMT180WTPBCSC BEARD/MUSTACHE TRIMMER Cutter Blades Blade Set TURBO SWITCH ON/OFF SWITCH with lock button Charging Light Indicator Line Cord TWO YEAR LIMITED WARRANTY Conair will repair or replace (at our
More informationPrecisionCut Hair Clipper
PrecisionCut Hair Clipper HC5900 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.remington.co.uk/productregister You must register within 28 days of purchase.
More informationBaldfader Clipper. Baldfader Clipper
Baldfader Clipper 1 Please read all instructions carefully to familiarize yourself with the Wahl Baldfader Clipper before using. Save these instructions for further reference. For any further assistance
More informationOwner s Manual. Maintenance for Pipeless (Sanijet ) 12, 13. Maintenance for Standard Pedicure Spa (Whirlpool Pump) 15, 16
Owner s Manual Table of contents 2 Introuduction & Safty Standard 3 Important considerations 4 Identify Parts & Description 5 Massage System 6 Pacific 750 Chair Assembly 7 Pacific 300 Chair Assembly 8
More information3D Printed 20w Amplifier Box
3D Printed 20w Amplifier Box Created by Ruiz Brothers Last updated on 2018-02-26 06:48:02 PM UTC Guide Contents Guide Contents Overview Prerequisite Guide Tools & Supplies Parts 3D Printing Print in your
More informationQTY ITEM NO. PART NO. DESCRIPTION VENDOR
QTY ITEM NO. PART NO. DESCRIPTION VENDOR RMX 5050 Parts List (120V) Display Board Assembly (QSC part # PCB-QZ120C-DIS) Quantity: 1 1725-607B-0000 PCB PWR/PSU2/OUT/DIS/LED 1 5001 2102-021S-004 2P ST.WAFER
More informationBODY & BIKINI KIT 2 YEAR WARRANTY WPG4020AU USE & CARE MANUAL. To register your product go to PLEASE READ PRIOR TO USE
BODY & BIKINI KIT USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to www.remington-products.com.au 2 YEAR WARRANTY WPG4020AU IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances,
More informationModel #7650 Instruction Manual Patent Pending
Model #7650 Instruction Manual Patent Pending IMPORTANT SAFEGUARDS Read all instructions before use and keep for future reference. Use shaver and accessory chargers only for their intended purpose and
More informationRotary Shaver. 10,000 prize draw. Register online for PR1330. EXTRA year guarantee FREE rewards gallery
Rotary Shaver PR1330 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.remington.co.uk/productregister You must register within 28 days of purchase. Thank you for
More informationTopStyler User Manual
TopStyler User Manual 2 WARNINGS: TO REDUCE THE RISK OF SERIOUS IN- JURY, READ ALL INSTRUCTIONS AND WARNINGS COMPLETELY BEFORE USING THIS PRODUCT. The TopStyler has been carefully engineered for both effectiveness
More informationMad Science Test Tube Rack
Mad Science Test Tube Rack Created by John Park Last updated on 2016-10-17 09:21:01 PM UTC Guide Contents Guide Contents Overview Lighted Test Tube Parts Materials and Tools Optional Test Tube Rack Parts
More informationSolar Boost Bag. Created by Becky Stern. Last updated on :44:55 PM UTC
Solar Boost Bag Created by Becky Stern Last updated on 2018-08-22 03:44:55 PM UTC Guide Contents Guide Contents Overview 3D Design Files Customize Design Assemble Circuit Prepare Solar Panel Enclosure
More informationThe Wand - Sculpt beautiful and professional curls. Quick start and safety guide
UK The Wand - Sculpt beautiful and professional curls Quick start and safety guide Using the wand to create professional curls Remove the wand from its heat resistant guard by gripping the cover and pulling
More informationBodyBare Perfection. Instruction Booklet. cordless epilator & shaver with manual precission tweezers AP17LTR
BodyBare Perfection cordless epilator & shaver with manual precission tweezers Instruction Booklet AP17LTR Please read these instructions carefully and retain for future reference. Contents Sunbeam s Safety
More informationFreedom Line RMN with INNOVATOR Doors or INNOVATOR III Doors Technical Data Sheet P/N _D NSF Certified December 2012
Freedom Line merchandisers are top mount refrigeration ready Freedom Line RMN with INNOVATOR Doors or INNOVATOR III Doors Technical Data Sheet P/N 0520884_D NSF Certified December 2012 OPTIONS SHOWN: Lighted
More informationInstructions and Safety notices
VorTex High Tensile Parasol Instructions and Safety notices Note: These instructions should be delivered with the parasols and should be retained by the operator. Please ensure that these instructions
More informationHAIRCUT KIT. 2 YEAR WARRANTY HC2000 Series USE & CARE MANUAL. To register your product go to PLEASE READ PRIOR TO USE
HAIRCUT KIT USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to www.remington-products.com.au 2 YEAR WARRANTY HC2000 Series IMPORTANT SAFETY INSTRUCTIONS When using an electric appliance,
More informationWorkshop Manual, Seal handbook part
Workshop Manual, Seal handbook part Mechanical seals for Large C-Pumps, L-Pumps and P-Pumps equipped with 605-series, 705-series, 805-series, 905-series drive units 894483/01 2 Seal handbook part, Large
More informationCUTTING EDGE BEARD TRIMMER
CUTTING EDGE BEARD TRIMMER USE & CARE MANUAL PLEASE READ PRIOR TO USE 2 YEAR WARRANTY MB6025AU IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be observed,
More informationTITANIUM ALL-IN-ONE RECHARGEABLE GROOMING SYSTEM
TITANIUM ALL-IN-ONE RECHARGEABLE GROOMING SYSTEM USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to www.remington-products.com.au 2 YEAR WARRANTY PG6020AU IMPORTANT SAFETY INSTRUCTIONS
More informationPR O ST YL E. Men s Foil Shaver. Model Number: AP Product Number: INSTRUCTION MANUAL. Version 5 - Issued 01/09/15
PR O ST YL E Men s Foil Shaver Model Number: AP4500 Product Number: 5730 INSTRUCTION MANUAL Version 5 - Issued 0/09/5 Welcome Congratulations on choosing to buy a Visage product. All products brought to
More informationDP inch Bench Mount Drill Press SETUP & OPERATION MANUAL
SETUP & OPERATION MANUAL 10 inch Bench Mount Drill Press Features 5 speeds Patented precision crosspattern laser alignment and centering guide Unique built-in LED work light illuminates the work table
More informationComfort Series Plus/Pro Foil Shaver
Comfort Series Plus/Pro Foil Shaver PF7400 PF7500 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.productregister.co.uk/remington. You must register within 28
More informationPOWER TRANSFORMERS MVA kv. ISO 9001: Żychlin, ul. Narutowicza 70 ISO 14001:2004 PN-N-18001:
ISO 9001:2000 99-320 Żychlin, ul. Narutowicza 70 ISO 14001:2004 PN-N-18001:2004 www.ftz.pl Secretary s Office Tel.: +48 24 285 46 05, Fax: +48 24 285 46 31 zarzad@ftz.pl Sales and Marketing Department
More information3D Printed 20w Amplifier Box
3D Printed 20w Amplifier Box Created by Noe & Pedro Ruiz Last updated on 2014-04-22 03:01:38 PM EDT Guide Contents Guide Contents Overview Prerequisite Guide Tools & Supplies Parts 3D Printing Print in
More informationFILE - REMINGTON MANUAL DOWNLOAD
14 December, 2017 FILE - REMINGTON 106890 02 MANUAL DOWNLOAD Document Filetype: PDF 415.18 KB 0 FILE - REMINGTON 106890 02 MANUAL DOWNLOAD This is the one tool you need for complete styling of your facial
More informationPedicure Spa Use & Care Manual
Pedicure Spa Use & Care Manual TM TM TM Patent Pending Patent Pending Patent Pending TM TM TM Patent Pending Patent Pending Patent Pending IT IS IMPORTANT THAT YOU READ AND FOLLOW THESE INSTRUCTIONS. PLEASE
More informationFM-OS Centrifugal Pump
Spare Parts FM-OS Centrifugal Pump SP70344-GB4 2001-03 2 Reg.: 2001-03 Intro.: 8301 Single Shaft Seal Pos. Qty. Denomination FM-0S/95 FM-0S/115 Pos. Qty. Denomination FM-0S/95 FM-0S/115 1 1 Motor 1.1 kw...
More informationBodyBare Instruction Booklet
BodyBare Instruction Booklet This book covers the use and care of the following Emjoi epilators: AP9G BodyBareLuxe AP9GA BodyBareSpa AP9GAR BodyBareGo AP98R BodyBareUltimate Please read these instructions
More informationUltimate Body & Bikini Kit
Ultimate Body & Bikini Kit USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to remington-products.com.au remington.co.nz WPG4031AU IMPORTANT SAFETY INSTRUCTIONS When using appliances,
More informationOil & Gas. Simplified Frac Iron System
Oil & Gas Simplified Frac Iron System 2 The shortest distance between two points is a straight line. Weir introduces that radical idea to the frac site. Simplicity delivered Consider the traditional frac
More informationREPELLENT Ready-to-Use
90780-17001_Tomcat Repellents Rodent Repellent Ready-To-Use_20170927_21_90780_.pdf SAFE FOR KIDS & PETS* LONG LASTING & RAIN RESISTANT FORMULA 100% MONEY BACK GUARANTEE ACTIVE INGREDIENT: Sodium Lauryl
More informationStumble-Bot. Created by Dano Wall. Last updated on :04:06 AM UTC
Stumble-Bot Created by Dano Wall Last updated on 2018-09-06 05:04:06 AM UTC Guide Contents Guide Contents Overview Simply Stumbling We Have the Technology Other Supplies Leg Assembly Front Legs Back Legs
More informationR3150AU 2 YEAR WARRANTY. Use and Care Instruction Manual PLEASE READ PRIOR TO USE
R3150AU 2 YEAR WARRANTY Use and Care Instruction Manual PLEASE READ PRIOR TO USE IMPORTANT SAFETY INSTRUCTIONS When using an electric shaver, basic safety precautions should always be observed, including
More informationVERSATILITY, RELIABILITY & PERFORMANCE distinguish these airbrushes as Eclipse!
Congratulations on the purchase of your Iwata Eclipse airbrush, a versatile, reliable and high-performance airbrush. We designed this Eclipse for the exacting needs of the artist who requires a multi-purpose,
More informationDIY Circuit Playground Shields
DIY Circuit Playground Shields Created by Dave Astels Last updated on 2018-08-22 04:05:06 PM UTC Guide Contents Guide Contents Overview Small Alligator Clip Test Lead (set of 12) Small Alligator Clip to
More informationSTERN TUBE SEAL STERN KEEPER C-TYPE MANUAL
STERN TUBE SEAL STERN KEEPER C-TYPE MANUAL C O N T E N T S CHAPTER 1 DESCRIPTION OF SAFETY 1 LIST OF WARNING 3 2 LIST OF CAUTION 4 CHAPTER 2 OUTLINE 5 1 INTRODUCTION 5 2 SPECIFICATION 5 2.1 SEAL TYPE 5
More informationKERATIN & ARGAN OIL NOURISH STRAIGHTENER
KERATIN & ARGAN OIL NOURISH STRAIGHTENER USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to www.remington-products.com.au www.remington.co.nz 2 YEAR WARRANTY S7505AU IMPORTANT SAFEGUARDS
More informationTopStyler User Manual
TopStyler User Manual IMPORTANT SAFETY INFORMATION 2 WARNINGS: TO REDUCE THE RISK OF SERIOUS INJURY, READ ALL INSTRUCTIONS AND WARNINGS COMPLETELY BEFORE USING THIS PRODUCT. The TopStyler has been carefully
More informationHooked-Clasps And Eyes By B. Read
Hooked-Clasps And Eyes By B. Read If you are searched for a book by B. Read Hooked-Clasps and Eyes in pdf format, then you have come on to faithful site. We furnish full variation of this book in doc,
More informationCharging base. Trimming head (30mm) on charging stand. Main body unit. On/Off switch. Indicated light. Connecting jack Connecting jack
X Thank you for your purchase. In order to make you more comfortable by using the product, please read this user manual carefully and keep it for future reference. www.dixix.com 1 Trimming head (30mm)
More informationL E N O X OWNER S MANUAL. Please read user s Manual thoroughly before using pedicure spa. Product of J&A Copyright 2010 by J&A USA Inc.
L E N O X DS OWNER S MANUAL Please read user s Manual thoroughly before using pedicure spa Product of J&A Copyright 2010 by J&A USA Inc. Printed in USA Table of contents Warranty form Service inquiry form
More informationINSTRUCTION MANUAL Washbasin lifts
English Washbasin lifts 4130/4140/4170 Doc. No: M41xx Edition: 1 Date: 2008-05-06 INSTRUCTION MANUAL Washbasin lifts 4130 4140 4170 Granberg Interior AB Box 6112 SE-600 06 Norrköping SWEDEN More information:
More informationFurness Railway Wagon Co.
Furness Railway Wagon Co. Furness Railway/LMS/BR 25ton All Steel Bogie Bolster/Rail Wagon Wheels, paint and transfers required to complete. Please note that to aid the folding of the various parts score
More informationThese are the same tools I use to get airbrushes. clean and pristine. Kirk Lybecker Iwata Technical Services
PN: CL 100 These are the same tools I use to get airbrushes clean and pristine. Kirk Lybecker Iwata Technical Services Iwata Airbrush Cleaning Kit includes: Illustrated Instructions Step-by-step process
More informationAssistance for finding the right locks and fittings PAGE Numerical index... A 4
Assistance for finding the right locks and fittings PAGE Numerical index... A 4 Alphabetical index... A 8 General description of espagnolettes, multi point locks, handles and other fittings... B 12 Windows,
More informationOwner s Manual. Table of contents 2. Introuduction & Safty Standard 3. Important considerations 4. Identify Parts & Description 5.
Owner s Manual Table of contents 2 Introuduction & Safty Standard 3 Important considerations 4 Identify Parts & Description 5 Massage System 6 Toepia Chair Assembly 7 Toepia LX Armrest Assembly Toepia
More informationPOWER TOOL HAIR CUT KIT
PROFESSIONAL POWER TOOL HAIR CUT KIT USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to www.remington-products.com.au 5 YEAR WARRANTY HC5851AU IMPORTANT SAFETY INSTRUCTIONS When
More informationWILLOWWOOD ONE TRANSTIBIAL SYSTEM
WILLOWWOOD ONE TRANSTIBIAL SYSTEM User Instructions Thank you for using the WillowWood One System. Please follow these steps to ensure the most comfort and longest life from the system: Read and follow
More informationP/N : CW SUBREV : C01 DRAWN BY : VLE DATE : SHEET 1 OF 4 WEIGHTS/GUIDE RODS, SHEET 4 PADS/HARDWARE, SHEET 3
WEIGHTS/GUIDE RODS, SHEET 4 PADS/HARDWARE, SHEET 3 FRAME/COMPONENTS, SHEET 2 DRAWN BY : VLE DATE : 11.28.07 SHEET 1 OF 4 3X 35 3X 43 41 6 43 32 41 6 2.01-2.16 10 43 3X 33 3X 46 26.01-26.16 1.01-1.16 10
More informationDualTrack-X. 10,000 prize draw. Register online for R4150. EXTRA year guarantee FREE rewards gallery
DualTrack-X R4150 Register online for 10,000 prize draw EXTRA year guarantee FREE rewards gallery Visit www.productregister.co.uk/remington. You must register within 28 days of purchase. Thank you for
More informationHaircut kit IMPORTANT SAFETY INSTRUCTIONS. DANGER Any appliance is. WARNING To reduce the risk PIECE
Instructions for Care and Use MODEL HC220DCSC 20 PIECE Haircut kit IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, especially basic precautions should always be followed, including the
More informationOperating Instructions
Operating Instructions (Household) Rechargeable Shaver Model No. ES LF71 Before operating this unit, please read these instructions completely and save them for future use. ES-LF71_AUS.indb 1 2011/02/25
More informationProfessional Manicure & Pedicure Kit
ELM-MAN200-0214-01_Layout 1 28/02/2014 15:17 Page 1 Professional Manicure & Pedicure Kit 2 Year Guarantee Instruction Manual By ELM-MAN200- ELM-MAN200-0214-01_Layout 1 28/02/2014 15:17 Page 2 Thank you
More informationPEDICURE SPA USER MANUAL
Version 1.1 12/07/2017 Leader in Skincare and Spa Equipment PEDICURE SPA USER MANUAL SkinAct Before Operating the unit, please read this manual thoroughly and retain it for future reference. RECEIVING
More informationKM-S824 Modern Salon Spa Pedicure Chair Plumbing Free
KM-S824 Modern Salon Spa Pedicure Chair Plumbing Free NOTE: There is a wiring harness (see arrow) that needs to be connected from under the seat cushion to the back of the Chair Back. Keller International
More informationSTRING LINES. If the frame is not fitted straight plumb and level the doors will not function correctly.
STRING LINES To ease installation of this frame it has been fitted with string lines. If the frame is not fitted straight plumb and level the doors will not function correctly. To ensure the top and bottom
More informationOwner s Manual & Styling Guide WARRANTY INFORMATION INSIDE
Owner s Manual & Styling Guide WARRANTY INFORMATION INSIDE Important Safety Instructions When using electrical appliances, especially when children are present, basic safety precautions should always
More informationBEARD BOSS PRO TRIMMER
BEARD BOSS PRO TRIMMER USE & CARE MANUAL PLEASE READ PRIOR TO USE To register your product go to www.remington-products.com.au www.remington.co.nz 2 YEAR WARRANTY MB4045AU IMPORTANT SAFETY INSTRUCTIONS
More informationHammer Time Mini Golf Hazard with Crickit
Hammer Time Mini Golf Hazard with Crickit Created by John Park Last updated on 2018-07-09 06:47:53 AM UTC Guide Contents Guide Contents Overview Please Hammer, Don't Hurt Em Parts Materials & Tools Program
More informationBill of Materials: DIY RFID Reader PART NO
DIY RFID Reader PART NO. 2171057 The DIY RFID reader allows you read any EM4100 compatible tags. The RFID reader needs to be energized with a regulated 5V DC voltage (you can use a 7805 voltage regulator,
More information