Contents. About us. Guide to Hand Protection Standards 4-5. Disposable and Chemical 6-8. General use Thermal

Transcription

1 EST. 1992

2 Contents. About us Guide to Hand Protection Standards Disposable and Chemical General use Thermal Waterproof Cut resistant - gloves - sleeves Puncture and needle resistant Heat resistant Anti - vibration Anti - static

3 About us Microlin Cooper is a family business that has been established for over 25 years. We are suppliers of high performance industrial safety gloves. Our products are supplied in the UK and internationally across Europe and in the Middle East. We create and innovate our products to keep up with the pace of the ever changing demands of the health and safety sector. Our aim is to manufacture products which satisfy the demands required in the health and safety market while following the needs and wants of the customer in question. From Klass to own branding, what makes Microlin Cooper unique is our flexibility. We thrive on our ability to customise our range of gloves and manufacture bespoke products according to what the customer requests. Commited to excellence 3

4 Guide to Hand Protection, EN Standards EN The European Standard EN388 covers the test requirements for safety gloves that are sold as protection against mechanical risks. It is generally accepted that the majority of occupational hand injuries are caused by cuts and abrasions, with most of the more serious injuries due to cuts. The EN388 Standard requires gloves to be scored on a scale of 1 to 5 for blade cut resistance (with 5 being the highest score) and 1 to 4 for abrasion resistance, tear resistance and puncture resistance. The test results will vary according to the fibres, materials, stitching and coating used to make a particular glove. EN Heat resistant gloves are rated according to EN 407. EN 407 ratings have 6 numbers, and each shows the glove s resistant to a certain type of hazard. 1) Resistance to flammability - The material is stretched and lit with a gas flame. The flame is held against the material for 15 seconds. After the gas flame is distinguished, the length of time is measured for how long the material either glows or burns. 2) Resistance to contact heat - The material is exposed to temperatures between +100 C and +500 C for 15 seconds. The length of time is then measured for how long it takes the material on the inside of the glove to increase by 10 C from the starting temperature (approx. 25 C). 3) Resistance to convective heat - The amount of time is measured for the heat from a gas flame to increase the temperature of the glove s inside material by 24 C. 4) Resistance to radiant heat - This is tested by measuring how long the glove is able to delay the transfer of heat from a radiant heat source. 5) Resistance to small splashes of molten metal - The test is based on the total number of drops of molten metal required to increase the temperature by 40 C between the inside of the glove and the skin. 6) Resistance to large splashes of molten metal - The test measures how much molten metal is required to damage material inside the glove. European Regulation 10/2011 applies to all plastic articles or materials supplied in the EU which are intended to come into contact with food. This includes packaging that touches food and items in contact with foodstuffs during processing, such as food safe gloves. The Food Standards Agency is responsible for ensuring the public is protected against chemicals that might transfer onto food from materials they come into contact with, for example packaging and utensils. It carries out research and surveillance and uses the result of this to help enforce controls. 4

5 EN511 The EN511 test is a guide for protection against cold. 1) Resistance to convective cold (performance level 0-4) 2) Resistance to contact cold (performance level 0-4) 3) Permeability by water (0 or 1) 123 Convective cold resistance is based on the thermal insulation properties of the glove which are obtained by measuring the transfer of cold via convection. Contact cold resistance is based on the thermal resistance of the glove material when exposed to contact with a cold object. Water impermeability: 0 = water penetration after 30 minutes of exposure 1 = no water penetration. Materials and Coatings Coatings PVC Cheap material Water resistant Resistant against some chemicals Some users find PVC uncomfortable after long periods Does not offer good grip Nitrile Very good resistance against oil Cheap and durable Nitrile Foam offers additional grip Offers some puncture resistance Can be uncomfortable over long work shifts Latex Excellent water resistance Latex foam offers ultimate grip in wet conditions Cheap and durable Direct contact with latex can cause hand allergies Polyurethane (PU) Thin, to offer greater dexterity than other coatings Relatively breathable in comparison Tough and flexible Porous, liquids will penetrate through Not ideal for abrasion Materials HPPE High performance polyethylene is flexible, light and durable. As resistant to cutting as a para-aramid but with more resistance to abrasion. Excellent tear resistance Comfortable and flexible Higher in cost in comparison to some other cut resistant fibres Kevlar Very Good cut resistance Offers some heat resistance Can be used as thread to strengthen the seams of a glove and increase the lifespan Not as flexible as other cut resistant fibres Expensive Polyester and Nylon Good for flexibility and elasticity Man made fibre, so costs less likely to fluctuate Inexpensive Limited to general usage gloves only Cotton Good for cold and heat resistance Comfortable Good for sweat absorbtion Natural fibre Needs to be mixed with another material to increase elasticity 5

6 Nitrile Disposable Nitrile provides superior resistance to chemicals and tearing. A safe and reliable alternative to Latex for allergy sufferers. El nitrilo proporciona una resistencia superior a los productos químicos y lagrimeo. Una alternativa segura al Látex para las personas alérgicas. Nitrile offre une résistance supérieure aux produits chimiques et à la déchirure. Une alternative sûre au latex pour les personnes allergiques. Common Applications: Food Preparation Pharmaceuticals Laboratory Work Cleaning General Assembley Automotives Nitrile Disposable 6

7 Peppermint 5 mil Nitrile Powder Free Disposable Glove These gloves are powder free, as to avoid a powder residue when removed. The gloves are 5 mil in thickness, making these gloves one of the best quality available on the market. The low modulus formula makes the glove stretchy, for comfort and ease of donning. Resistant to many acids and solvents, and approved for use in food preparation. alta calidad nitrilo guantes desechables sin polvo 5 mil de espesor haute qualité nitrile gants jetables pas de poudre 5 mil d épaisseur Blue Mint These nitrile disposable gloves are powder free, and 2.2 Mil in thickness (3.0g). They are light, comfortable and strong. 100 gloves per dispenser 10 dispensers per case Sizes available: 7-11 Nitrile Disposable 7

8 Chemical G52 60cm PVC Gauntlet Ideal for use against chemical splashes in regular or cleanroom environments. 60cm total length. Made from 100% PVC material and comes cleanroom packed to class 100. Approved Food Safe. CE Cat III Ideal para el uso contra salpicaduras de sustancias químicas. 60cm de longitud total. Hecho de 100% PVC Idéal pour une utilisation contre les éclaboussures de produits chimiques. Totale 60 cm de longueur. 100% PVC 3000 EN374-3 EN374-2 BO700 PVC Glove BO700 are 12 inch long 12 mil thick patented PVC gloves They fit like second-skin and provides unrivaled softness. The patterned palm and fingertips provide excellent gripping action. CE CAT III BO700 son 12 pulgadas guantes de PVC patentada que era como una segunda piel y proporciona suavidad inigualable. BO700 sont des gants en PVC 12 pouces brevetés qui correspondent à une douceur seconde peau et offre inégalée. Nitrile Disposable 3000 EN374-3 EN

9 General use 9

10 DEL Guage with Polyurethane Coating An 18 gauge liner with a light polyurethane coating. A glove that makes you feel like you are working with bare hands, but with protection. Perfect for precise and delicate operations. Un guante de calibre 18 con un recubrimiento de poliuretano. Un guante que te hace sentir como si estuviera trabajando directamente con las manos. Un gant de jauge 18 avec un revêtement en polyuréthane. Un gant qui vous fait sentir comme vous travaillez avec les mains nues. Sizes available: Red Devil Cotton Interlock Liner with PVC Coating A knitwrist red PVC coated glove on a cotton interlock liner. Provides protection from oil, grease and many household chemicals. Knitted wrist cuffs for comfort. Un PVC rojo recubierto guante en un forro de algodón. Para la protección contra aceite y productos químicos. Un PVC rouge recouvert gant sur un paquebot de coton. Pour la protection contre l huile et les produits chimiques. Case Quantity 120 pairs pr case 4131 General use 9&10 10

11 Grip & Go Mixed Fibre Glove with PVC Dots A seamless five-finger knitted glove with a 4cm elasticated cuff. Woven with a mixture of 70% cotton, 34% Polyester and 1% polyamide fibre. The knitted mixed fibre gives the glove more thermal properties than a standard cotton glove, but doesn t make the hands clammy. PVC dots for Grip. Un guante de fibra se mezcla con puntos de PVC para un mejor agarre. Un gant de fibres mélangées avec du PVC dots pour une meilleure adhérence. 120 pairs per case Pick & Go Nylon Liner with PVC Dots 13 gauge lint-free, seamless knitted gloves. Ideal for warehouses and indoor use. Pick & Go provides the user with good grip and dexterity, with resistance to abrasion. The glove is knitted with 100% polyamide thread and coated with PVC dots. uso general guante con puntos de PVC. usage général gant avec des points de PVC 120 pairs per case x General use 11

12 Finger Picker Half Finger Nylon Liner with PVC Dots This glove gives the fingers freedom for delicate applications whilst still giving grip. A multipurpose, versatile glove that can be used in an array of dry handling applications A medio-dedo del guante de uso general con puntos de PVC Une demi-doigt usage général gant avec des points de PVC X GENERAL USE DEL 600 Polyester Liner with PU Coating on the fingertips This is a 13 gauge knitted polyester glove with a polyurethane dipping on the fingertip area to protect against nicks and cuts. Suitable for use in microelectronics, precision assembly, inspection etc. Guante de poliéster con revestimiento de PU en las yemas de los dedos Polyester gants avec revêtement PU sur le bout des doigts 112X General use

13 Orange Grip Cotton glove with Orange Latex Coating A 13 gauge cotton liner with a crinkled latex coating. This coating gives the user excellent grip in wet and dry conditions. The back is left uncoated for ventilation. Un forro de algodón calibre 13 con un recubrimiento de látex arrugado. Une doublure de coton de calibre 13 avec un revêtement de latex plissés Black Grip Mixed fibre Liner with Black Latex, Cut Level 2 Mixed fibre and cotton glove made with a crinkled black latex coating on the palm and fingers of the hand. The back of the hand is uncoated to provide ventilation and avoid perspiration. Fibra mixta guante hecho con un recubrimiento de látex negro arrugado Gant de fibre mixte composé d une couche de latex noir froissé General use 13

14 L4001 Nylon Liner with Black Latex Coating A light,13 gauge nylon glove, with a hard wearing black latex coating on the palm and fingers of the hand. The glove is suitable for building & construction work, concrete & brick handling, gardening etc. Guante de nylon 13 de calibre ligero, con un recubrimiento de látex negro resistente Une lumière, de calibre 13 gants en nylon, avec un revêtement en latex noir résistant DEL 501/DEL 503 Nylon Glove with Nitrile Coating This glove offers a very good grip in wet, dry and oily conditions. The glove is light and uncoated on the back for ventilation. DEL 501 = White liner with grey coating DEL 503 = Black liner with black coating un guante de nylon con recubrimiento de nitrilo para un mejor agarre en condiciones aceitosas. un gant en nylon avec un revêtement de nitrile pour une meilleure adhérence dans des conditions huileuses. 120 pairs per case 4131 General use

15 Driver s Glove Premium Leather with Cotton Fleece Lining A hard wearing leather driver glove. This glove is soft and comfortable, yet tough and durable. Made with very soft, high quality leather. Available with or without cotton lining. Guantes de conducir de cuero. Disponible con o sin revestimiento interior. Gant de pilote en cuir. Disponible avec ou sans doublure. 9&10 DEL 219/DEL 499/DEL 201 Polyester liner with Polyurethane coating A seamless polyester knitted glove, with a fine polyurethane coating on the palm and on the fingers. Available in black, grey and white. Also available with a nylon liner. un guante de poliéster calibre 13 con un recubrimiento de poliuretano. un polyester gant 13 de la jauge avec un revêtement en polyuréthane. 300 pairs per case 4141 General use

16 Thermal Protection From Cold EN 511 a) Resistance to convection cold b) Resistance to contact cold c) Permeability to water Rating abc 16

17 ARTIC WINTER Thick Acrylic Liner for Temperatures down to -25 C High visibility, acrylic cotton liner with a black high grip, foamed-rubber coating. HPT foam 3/4 coating remains flexible to temperatures as low as -25 C This glove is ideal for use in very cold and dark environments and freezers. Alta visibilidad, forro de algodón acrílico con un alto agarre negro, revestimiento de goma espuma. Para temperaturas muy frías, tan bajas como -25 C Haute visibilité, doublure de coton acrylique avec un haut niveau d adhérence noir, revêtement caoutchouc mousse. Pour des températures très froides, aussi basses que -25 C Case Quantity: 5 pairs per bag 60 pairs per case 2243 x2x 8-10 CRYO LEATHER Protects at temperatures as low as 256 F ( 160 C) For protection between -125 C and C to prevent freezer burns and frostbites in cryogenic atmospheres. Manufactured using American cut cowhide leather and insulated with wool lining and double layers of Goretex lining to prevent ingress of liquids. CE CAT 111 Para una protección entre -125 C y C para evitar quemaduras de congelación y sabañones Pour une protection entre -125 C et C pour éviter les brûlures de congélation et gelures 16 Thermal

18 NEON 7 7 Gauge Thermal Glove This glove is a 7 gauge cotton liner with a high grip, blue latex coating. Ideal for temperatures hovering around freezing indoors and outdoors. Este guante es un forro de algodón 7 guaje con un alto nivel de agarre, revestimiento de látex azul. Ce gant est une doublure de coton 7 de jauge avec une poignée haute, revêtement de latex bleu. Case Quantity: 60 pairs per case X NEON Gauge Thermal Glove A 10 gauge cotton liner with a high grip, black latex coating. Ideal for keeping hands warm in cold temperatures but maintaining dexterity. Un forro de algodón 10 calibre con un agarre alto, recubrimiento de látex negro. Une doublure de coton de 10 jauge avec une poignée haute, revêtement de latex noir. Case Quantity: 60 pairs per case Thermal 18

19 Waterproof 19

20 AQUA 318 Full Latex Coating with Foam Latex on Palm This waterproof glove incorporates a 13-gauge nylon liner and is fully coated with latex on the front and back of the hand. This glove is completely waterproof and very comfortable to wear! The foam latex layer on the palm offers good grip in wet and dry conditions. Available in red. (Product Code H20) Un guante de látex totalmente revestido y flexible. Totalmente resistente al agua. Un gant en latex entièrement revêtue et flexible. Complètement étanche. 12 pairs per bag 144 pairs per case THERMO PLUS 338 Brushed Acrylic Liner with Waterproof Latex Coating A thermal, waterproof, 13 gauge glove with a napped acrylic liner to keep the user s hands warm, but retains flexibility and dexterity. It is fully waterproof and comfortable to wear in cold and wet temperatures. Ideal for construction work, gardening, cyclists etc. Un guante de látex totalmente revestido y flexible. Totalmente resistente al agua con un forro térmico. Un gant en latex entièrement revêtue et flexible. Complètement imperméable avec une doublure thermique. 12 pairs per bag 72 pairs per case X 2231 Waterproof 20

21 Cut resistant 21

22 TEK 548 Uncoated Cut Level 2 Liner This is an uncoated cut level 2 liner. This glove is tight fitting for sensitivity and dexterity. Made from 100% ultra-high molecular weight polyethylene fibre. Ideal for low-risk cut environments, or as a liner for added protection. Se trata de un revestimiento sin recubrimiento nivel de corte 2. Este guante es ajustada para la sensibilidad y destreza. Il s agit d un non couché niveau de coupe 2 doublure. Ce gant est bien ajusté pour la sensibilité et la dextérité X TEK 547 Cut Level 3 with PVC Dots This is a very thin, black cut level 3 liner with blue silica dots. Provides the best dexterity and comfort compared to any other cut level 3 glove on the market. Because of the unique dots, this glove with provide the user with grip without feeling hot and clammy. Se trata de un revestimiento muy fino, nivel de corte negro 3 con puntos azules de sílice. Proporciona la mejor destreza y confort en comparación a cualquier otro nivel de corte 3 de los guantes en el mercado. Il s agit d une très mince, niveau de noir coupé 3 doublure à pois bleus silice. Fournit la meilleure dextérité et de confort par rapport à un autre niveau de coupe 3 gant sur le marché. 234X Cut Resistant

23 TEK TEK TEK Cut Level 3 with Polyurethane Coating A cut level 3 glove with a polyurethane coating. These gloves all have the highest abrasion and tear levels, making the quality excellent. The back allows the hand to remain cool. TEK 549-8: Grey liner with grey coating TEK 549-1: White liner with white coating TEK 549-2: White liner with grey coating A nivel de corte del guante 3 con un recubrimiento de poliuretano. Muy a la abrasión y resistencia al desgarro. A nivel de corte del guante 3 con un recubrimiento de poliuretano. Muy a la abrasión y resistencia al desgarro TEK A 15 gauge Cut Level 3 glove This glove is a grey cut level 3 liner with a thin polyurethane coating. The liner is 15 gauge. The coating is reduced by 3 microns making it exceptionally flexible and tactile. Este guante es un gris liner nivel de corte 3 con una capa delgada de poliuretano. El recubrimiento se reduce de 3 micras Ce gant est un niveau de gris de coupe 3 liner avec un revêtement en polyuréthane mince. Le revêtement est réduite de 3 microns 234X Cut Resistant

24 Tek Green The Tek Green is an HPPE glove interwoven with 18 gauge needles for extra comfort and dexterity and a secure fit. It is coated with nitrile foam for working in oily/greasy environments Le Tek Green est un gant HPPE entrelacé avec des aiguilles de jauge 18, pour plus de confort et de dextérité et un ajustement sécurisé. Il est revêtu de mousse de nitrile pour travailler dans des environnements huileux / graisseux El Tek Green es un guante HPPE entretejido con agujas de galga 18 para mayor comodidad y destreza y un ajuste seguro. Está revestido con espuma de nitrilo para trabajar en ambientes aceitosos / grasos TEK 3000 Cut Level 3 with a rough Polyurethane Coating This is a cut level 3 liner with a slightly rough polyurethane coating. This glove is our most cost effective cut level 3 gloves, but still providing the user with the necessary protection and comfort. Un corte de nivel 3 guante, revestimiento de calibre 18, muy cómodo, recubrimiento de poliuretano Une coupe de niveau 3 gant, revêtement en polyuréthane, un gant à faible coût Cut Resistant

25 F17 Ultra thin Anti-static Cut Level 3 18 gauge glove with 18 gauge CARBON BASE FILAMENTS This product is a 18 gauge five-finger woven glove manufactured with; Tsunooga, polyamide fibres, and carbon fibres. It has a dark grey coating of polyurethane on the palm and on the fingers. Ce produit est un gant antistatique, coupure 3 tissé à cinq doigts calibre 18 fabriqué avec; Tsunooga, fibres de polyamide et fibres de carbone. Il a un revêtement gris foncé de polyuréthane sur la paume et sur les doigts. Este producto es un guante tejido de cinco dedos de calibre 18 fabricado con; fibras anticortes Tsunooga, fibras de poliamida y fibras de carbon, El guante tiene una capa fina gris oscura de poliuretano en la palma y en los dedos F18 Cut Level 3 with an 18 Gauge Liner The F18 is an extremely comfortable cut level 3 glove, made with an 18 gauge liner, with a fine polyurethane coating on the palm. This glove gives the user excellent dexterity whilst still protecting their hand from cuts. Un corte de nivel 3 guante, revestimiento de calibre 18, muy cómodo, recubrimiento de poliuretano Une coupe de niveau 3 gant, 18 revêtement de la jauge, le revêtement très confortable, polyuréthane Cut Resistant 25

26 TEK 1000 Cut Level 4 with Polyurethane Coating This is a cut level 4 liner with a polyurethane coating. This glove is an ideal compromise between sensitivity and very good cut resistance. This offers high levels of cut resistance, for a safe use in controlling, handling and assembly applications involving contacts with sharp pieces. Also available in cut 5. Se trata de un trazador de líneas de corte a nivel 4, con un recubrimiento de poliuretano. Este guante es un compromiso ideal entre sensibilidad y muy buena resistencia a los cortes. Il s agit d un niveau de coupe 4 liner avec un revêtement en polyuréthane. Ce gant est un compromis idéal entre la sensibilité et une très bonne résistance à la coupure TEK 1001 Cut Level 4 with Half Finger The TEK 1001 is a cut level 4 glove with a semi-fingerless design. Ideal for when applications involves fiddly precision and some finger exposure is necessary. La TEK 1001 es un nivel de corte de 4 guante con un diseño semi-sin dedos Le TEK 1001 est un niveau de coupe 4 gant avec un design semi-mitaines Cut Resistant 26

27 CRYSTAL Cut Level 5 with Foam-Latex Coating This is a cut level 5 glove with a foam latex coating. This coating gives the user maximum grip in wet and dry conditions. The high ratings for abrasion, tear and puncture makes this glove strong and long lasting. Este es un nivel de corte 5 guante con un revestimiento de espuma de látex. Este recubrimiento le da al usuario el máximo agarre en condiciones húmedas y secas. Il s agit d un niveau de réduction de 5 gant d une couche de mousse de latex. Ce revêtement permet à l utilisateur adhérence maximale dans des conditions humides et sèches SaFood Incredibly Strong Cut Level 5 Designed for comfort, dexterity and protection. This glove is made from a unique yarn construction using high strength cut resistant fibres and stainless steel fibres, giving an extremely high cut index level. This glove is seamless to avoid irritation and is ambidextrous. Este guante está hecho de fibras de alta resistencia resistentes al corte y el acero inoxidable, dando un nivel extremadamente alto índice de corte. Ce gant est fabriqué à partir de haute résistance des fibres résistants aux coupures et de l acier inoxydable, donnant un niveau de l indice de coupe extrêmement élevée. 354X Cut Resistant

28 TEK 2000 Cut Level 5 with Crinkle Latex Coating The TEK 2000 is a cut level 5 liner with a crinkled latex coating for grip and water resistance. The latex coating also gives increased puncture resistance. un nivel de corte 5 guante con recubrimiento de látex un niveau de réduction de 5 gant avec revêtement en latex S Gauge Cut Level 5 glove with PU Coating The S900 glove is a green cut level 5 liner with a black polyurethane coating. The green colour is to help the user to identify the correct glove to use in a high risk area. This glove is 15 gauge, which is thinner and lighter than the standard cut resistant gloves, making it more comfortable and increases dexterity Cut Resistant 28

29 PROTECTA PLUS Cut Level 5 glove with PU Coating The Protecta Plus has a very high cut index which goes beyond the standard cut 5 level (essentially making this glove a cut level 6/7). This glove still maintains a high degree of flexibility and dexterity even with a very high cut level index TEK 5005 Cut Level 5 with a smooth polyurethane Coating The TEK 5005 is an economical cut level 5 glove. It is made with a high cut resistant fibre with a smooth polyurethane coating for comfort and grip. This glove is close fitting and flexible for multiple uses. un nivel de corte 5 guante con recubrimiento de látex un niveau de réduction de 5 gant avec revêtement en latex Cut Resistant

30 TEK 1200 A Cut Level 5 Glove with a Leather Coating The TEK 1200 is a cut level 5 glove with a leather coating on the palm. This glove is ideal for protecting the user against splinters, broken glass, etc. The glove is Kevlar stitched for extra strength. Also available with a sleeve to protect the arm TEK 530 Level 5 made With Kevlar with a Nitrile Coating A cut level 5 glove, with heat resistance. Made with Kevlar, also contains ExtraFlex technology. Can resist temperatures of up to 80 C. The ExtraFlex feature makes the glove more comfortable and flexible X1XX4X 4543 Cut Resistant 30

31 DX 718 Fully Coated Nitrile Cut Level 5 A cut level 5 glove, which is fully coated with Nitrile, with an additional nitrile foam coating on the palm for extra grip. This glove is completely water and oil proof. This unique formation gives the user flexibility and comfort when working in these conditions. A nivel de corte 5 guante, que está totalmente recubierto con látex arrugado. Este guante es completamente resistente al agua. Un niveau 5 gant, qui est entièrement recouverte de latex froissé. Ce gant est complètement étanche Tek Blue A lightweight, 15 gauge cut resistant Level 5 Glove with a nitrile foam coating. Le Tek Blue est un gant HPPE entrelacé avec des aiguilles de jauge 15, pour plus de confort et de dextérité et un ajustement sécurisé. Il est revêtu de mousse de nitrile pour travailler dans des environnements huileux / graisseux El Tek Green es un guante HPPE entretejido con agujas de galga 15 para mayor comodidad y destreza y un ajuste seguro. Está revestido con espuma de nitrilo para trabajar en ambientes aceitosos / grasos 28 Cut Resistant

32 Cut resistant sleeves 32

33 PREMIER CUFF 45cm Cut Level 4 Sleeve A cut level 4 sleeve to protect arms and the palm of the hand. Total length is 45cm. Seamless lining and light in weight to avoid irritation. A nivel de corte 4 de la manga para proteger los brazos y la palma de la mano. La longitud total es de 45cm. Forro sin costuras y de la luz Un niveau de coupe 4 manches pour protéger les bras et la paume de la main. La longueur totale est de 45 cm. Doublure transparente et la lumière ONE SIZE 444X Cardiff sleeve Cut Resistant level 5 sleeve Velcro Strap for secure fit The Cardiff Sleeve is a grey coloured breathable knitted sleeve manufactured with Tsanooga thread. The Sleeve offers a high degree of dexterity as well as a velcro cuff to ensure the highest level of comfort for the user. Le Cardiff Sleeve est une manche tricotée respirante de couleur gris fabriquée avec du fil Tsanooga. La manchette offre un haut degré de dextérité ainsi qu un brassard en velcro pour assurer le plus haut niveau de confort pour l utilisateur. La manga de Cardiff es una manga de punto de color gris transpirable fabricada con hilo Tsanooga. La manga ofrece un alto grado de destreza, así como un ajuste de velcro para garantizar el más alto nivel de confort para el usuario. Case Quantity: 5 pieces per bag 300 pieces per case Cut Resistant sleevers Sizes Available ONE SIZE 454X 33

34 OXFORD 55cm Cut Level 5 Sleeve with Palm and half finger Protection This sleeve is 55cm (21.6 ), and long enough to give protection to the entire arm. They are elasticated at the wrist for comfort, and the fingerless design protects the palm and back of hand. The sleeves are seamless, and very light and flexible. High cut level 5 index. Esta funda es 55cm (21.6 ), y el tiempo suficiente para dar protección a todo el brazo. Nivel Cut 5 Ce manchon est 55cm (21,6 ), et suffisamment longue pour assurer la protection de tout le bras. Niveau 5 ONE SIZE 454X BRISTOL 45cm, Cut Level 5 Sleeve with Thumb hole A cut level 5 sleeve with a thumb hole. Seamless lining and light in weight to avoid irritation. Un manguito de corte de nivel 5 con un thumbhole. Forro sin costuras y luz en peso para evitar irratation. Un manchon de coupe de niveau 5 avec un trou pour le pouce. Doublure transparente et légère pour éviter irratation. 454X ONE SIZE Cut Resistant sleeves 34

35 Puncture Resistant 35

36 RIPEUR 2 Thorn and Barbed Wire Proof The Ripeur 2 glove is fully protected on the whole hand and front of the wrist. It is made with a heavy weight, knitted cut resistant fibre and stitched with Kevlar thread. The outer layer is leather which has been treated for water resistance. This glove is excellent for protection against thorns and sharp objects such as barbed wire. It is also a cut resistant level 5. Ripeur 2 es resistente a las espinas y vidrios afilados. Muy stong y cómodo de llevar. PUNCTURE RESISTANT Ripeur 2 est résistant aux épines acérées et verre. Très stong et confortable à porter. 5 pairs per bag 50 pairs per case LOGGER Protection When Using Chainsaws The Logger glove is for protection when using chainsaws. The back of the left hand is padded with a polycarbonate shell, the right hand is reinforced with leather for better grip on the machinery. El guante Logger es para la protección al usar motosierras. Le gant Logger est pour la protection lors de l utilisation des tronçonneuses. EN Puncture Resistant 36

37 Needle Resistant SEARCHLITE Partially Coated Needle Resistant Leather This is a cut level 5 glove with level 4 puncture resistance. It is lined with SharkSkin material, giving the user protection against needles, nails, splinters, glass etc. SharkSkin also allows for flexibility, sensitivity and comfort. Back of hand uncoated for added flexibility and comfort. Este es un nivel de corte 5 guante con nivel 4 reistance punción. Para la protección contra las agujas. Il s agit d un niveau de réduction de 5 gants de niveau 4 ponction reistance. Pour la protection contre les aiguilles. NEEDLE RESISTANT ANTI-NEEDLE 3 Fully Coated Needle Resistance This is a fully coated glove offering needle resistance to the whole hand. The anti-needle 3 has a cut resistance level of 5 over the whole hand and wrists. Ideal for searching needle contaminated areas and for security purposes. Este es un guante oferta resistencia aguja totalmente recubierto de toda la mano. Il s agit d un gant offrant une résistance de l aiguille entièrement revêtu de toute la main Needle Resistant 37

38 Heat Resistant This standard specifies thermal performance for protective gloves against heat and/or fire. a - Burning Behaviour (0-4) b - Contact Heat (0-4) c - Convective Heat (0-4) d - Radiant Heat (0-4) e - Small splashes of molten metal (0-4) f - Large quantities of molten metal (0-4) EN 407 a b c d e f 38

39 SANDOU Good Dexterity to Handle Items up to 500 C The Sandou Gloves enable the user to handle items up to 500 C for up to 15 seconds. This glove is made with a terry cloth Kevlar (550 gr/m2) material on the palm. The back of the glove and safety cuff are manufactured from split cowhide leather. Thickness :1.2mm. and 100% inside cotton lining (320 gr/ m2). The whole glove is stitched with Kevlar thread Los Guantes Sandou permiten al usuario manipular objetos de hasta 500 C durante un máximo de 15 segundos. Les Gants Sandou permettent à l utilisateur de gérer les éléments jusqu à 500 C pendant 15 secondes xxxx 4242 SILVER A Radiant Heat Resistant Glove This glove is excellent against splashes of molten metal, and convective and radiant heat. It has a contact temperature resistance of around 100 C for up to 15 seconds. Excelente contra salpicaduras de metal fundido, y convectivo y radiante de calor. Tiene una resistencia a la temperatura de contacto de 100 C durante un máximo de 15 segundos. Excellente contre les projections de métal en fusion, et par convection et par rayonnement thermique. Il a une résistance à la température de contact de 100 C pendant jusqu à 15 secondes Heat Resistant

40 HOT GLOVE Oven Style Glove with Silica Grip Can withstand handling temperatures of up to 350 C for under 15 seconds. It is made with Kevlar for cut resistance, and has a criss-cross silica pattern on the front and back. These gloves are ambidextrous. Puede soportar el manejo de temperaturas de hasta 350 C durante menos de 15 segundos. Hecho con kevlar y sílice para un mejor agarre. Peut résister à la manutention des températures allant jusqu à 350 C pendant moins de 15 secondes. Fabriqué avec kevlar et de silice pour une meilleure adhérence. ONE SIZE 423x2x ABI 800 Extreme Heat, fire and molten metal resistant HEAT RESISTANT This 5 finger glove that can be used in temperatures up to around 800 C. This glove has achieved the maximum result in all 6 of the EN407 test standards (level 4). It is resistant to molten metal splashes. It is fire resistant and can be used with radiant heat atmospheres. Length: 45cm. Also available in 35cm length un guante para un máximo de 800 C, los máximos resultados en la prueba EN x un gant pour un maximum de 800 C, un maximum de résultats sur le test de EN Heat Resistant x4x 40

41 LONG HOT GLOVE 45cm Long Heat Resistant Glove The long hot glove is a two layer glove to protect the hand and lower arm from burns. For temperatures reaching 350 C. The inner layer is made from cotton for comfort and insulation. The outer later is made from a mixture of Kevlar and Nomex. This combination also gives the glove a cut resistance level 4. Total length: 45cm un guante para un máximo de 350 C, protege la parte inferior del brazo y las manos. un gant pour un maximum de 350 C, protège le bras et les mains ONE SIZE 442xxx 244x B7 VERD A Radiant Heat Resistant Glove Mitt Verosta fabric, fully lined three-components (glass, aramid, Proban). Seams are stitched with stainless steel for optimal strength. The thumb is reinforced by a special ring Verosta. Resistant to heat contact, fire and flames to 800 C Length: 40cm including 15cm cuff. Available in 60cm. Resistente al fuego Mitt Para 800 C Résistant au feu Mitt Pour 800 C ONE SIZE 36 44xxxx 2x4x Heat Resistant 41

42 Anti - Vibration 42

43 ANTI-VIBE Anti-Vibration Glove This glove is economical and comfortable to wear, and provides good protection against shock and vibrations from machinery. Knitted with a mixture of cotton and polyamid fibres, with a Black Chloroprene coating on the palm and fingers. EN ISO 10819:1996 vibration and shock Obtaines Results : TRM= _ TRH= 0.57 Este guante es económico y cómodo de llevar, y ofrece una buena protección contra los golpes y las vibraciones de la maquinaria. Ce gant est économique et confortable à porter, et offre une bonne protection contre les chocs et les vibrations de machines. 9&10 x243 ANTI-VIBE ½ Anti-vibration Glove With Half Finger El guante es una versión del dedo medio de nuestro guante antivibración estándar, para un buen control y el fácil acceso a las máquinas de ajuste. Le gant est une version demi-doigt de notre gant antivibration standard, pour un bon contrôle et un accès facile à ajuster machines. 9&10 x243 Anti - Vibration 43

44 Anti-static 44

45 DEL 300 Anti-static Liner with Carbon filaments These lint free, nylon antistatic gloves feature integral carbon filaments to create an excellent, fitted antistatic glove. These gloves are compatible with touch screen technology. Also available with copper filaments. Un revestimiento antiestático con filamentos de carbono. Compatible con la pantalla táctil. Un revêtement anti-statique avec des filaments de carbone. Compatible avec l écran tactile. 300 pairs per case 7-10 EN DEL 310/320 Anti-Static Fibre with Polythurethane Fingertip Coating These lint free, nylon Antistatic Gloves feature integral carbon filaments to create an excellent, fitted antistatic glove. PU coating on fingertips aids grip. Compatible with touch screen technology Also available with copper filaments. DEL 320: Palm coated Un revestimiento antiestático con filamentos de carbono, con la punta de los dedos de poliuretano. Compatible con la pantalla táctil. Un revêtement anti-statique avec des filaments de carbone, avec le bout des doigts de polyuréthane. Compatible avec l écran tactile. EN Anti - Static

46 Coming soon TEK Fully coated CUT 5 DEL General Use Contact us for more information

47 INFERNO Protecting up to 1000 Contact us for more details

48 EST Address: Unit 12 Bourne End Mills Industrial Estate Upper Bourne End Ln Tel: +44 (0) Fax: +44 (0) address: Website: