FM-OS Centrifugal Pump

Transcription

1 Spare Parts FM-OS Centrifugal Pump SP70344-GB

2 2 Reg.: Intro.: 8301

3 Single Shaft Seal Pos. Qty. Denomination FM-0S/95 FM-0S/115 Pos. Qty. Denomination FM-0S/95 FM-0S/ Motor 1.1 kw / V (Standard) 2 4 Screw Spring washer Adaptor Yoke * 1 Impeller, diameter 95 mm (standard) Impeller 4 bladed, diameter 95 mm Impeller, diameter 115 mm (standard) Impeller 4 bladed, diameter 115 mm a 1 Pump casing with sanitary fittings 51 mm inlet and outlet ISO male SMS DIN ISO clamp BS b 1 Pump casing with flanges DN 50 inlet/dn 40 outlet 8 2 Nut Back plate D 1 O-ring, NBR (Standard) O-ring, EPDM O-ring, FPM O-ring, PTFE a 2 Stud bolt Thrower Nut Pump shaft Tubular spring pin * Sometimes reduced impeller diameter. Check the diameter of the original impeller. Shroud and legs 30 1 Shroud complete Support bar, left Support bar, right Nut Washer Leg Screw Washer Washer Nut Screw Optional extras 1 Shroud and legs kit D Service kit, NBR D Service kit, EPDM D Service kit, FPM D Service kit, PTFE Parts marked with D are included in the Service kits. D Shaft seal, complete, NBR (Standard) Seal Rotating seal ring O-ring D Shaft seal, complete, EPDM Rotating seal ring O-ring D Shaft seal, complete, FPM Rotating seal ring O-ring D Shaft seal, complete, PTFE Rotating seal ring O-ring Alternatives Shaft seal, complete, NBR (Standard) Seal Rotating seal ring SiC O-ring Shaft seal, complete, EPDM Rotating seal ring SiC O-ring Shaft seal, complete, FPM Rotating seal ring SiC O-ring Shaft seal, complete, PTFE Rotating seal ring SiC O-ring Recommended spare parts: Service kit.

4 4 Reg.: Intro.: 8301

5 Double Shaft Seal Pos. Qty. Denomination FM-0S/95 FM-0S/115 FM-0/95 Pos. Qty. Denomination FM-0/ Motor 1.1 kw / V (Standard) 2 4 Screw Spring washer Adaptor Yoke * 1 Impeller, diameter 95 mm (standard) Impeller 4 bladed, diameter 95 mm Impeller, diameter 115 mm (standard) Impeller 4 bladed, diameter 115 mm a 1 Pump casing with sanitary fittings 51 mm inlet and outlet ISO male SMS DIN ISO clamp BS b 1 Pump casing with flanges DN 50 inlet/dn 40 outlet 8 2 Nut Back plate D 1 O-ring, NBR (Standard) O-ring, EPDM O-ring, FPM O-ring, PTFE b 2 Stud bolt Tubular spring pin Seal housing Screw a 4 Washer Pump shaft Fastening ring Intermediate flange Flushing tube Assembly mandrel (not shown) * Sometimes reduced impeller diameter. Check the diameter of the original impeller. Shroud and legs 30 1 Shroud complete Support bar, left Support bar, right Nut Washer Leg Screw Washer Washer Nut Screw Optional extras 1 Shroud and legs D Service kit, NBR D Service kit, EPDM D Service kit, FPM D Service kit, PTFE Parts marked with D are included in the Service kits. D Shaft seal, complete, NBR (Standard) Seal a 1 O-ring, front b 1 O-ring, back a+b 2 Rotating seal ring D Shaft seal, complete, EPDM a 1 O-ring, front b 1 O-ring, back a+b 2 Rotating seal ring D Shaft seal, complete, FPM a 1 O-ring, front b 1 O-ring, back a+b 2 Rotating seal ring D Shaft seal, complete, PTFE a 1 O-ring, front b 1 O-ring, back a+b 2 Rotating seal ring Recommended spare parts: Service kit.

6 (Same drawing as on page 4) 6 Reg.: Intro.: 8301

7 FM-0/95 Pos. Qty. Denomination FM-0/115 Double Shaft Seal Alternatives Shaft seal, complete, NBR (Standard) Seal a 1 O-ring, front b 1 O-ring, back a 1 Rotating seal ring SiC b 1 Rotating seal ring Shaft seal, complete, EPDM a 1 O-ring, front b 1 O-ring, back a 1 Rotating seal ring SiC b 1 Rotating seal ring Shaft seal, complete, FPM a 1 O-ring, front b 1 O-ring, back a 1 Rotating seal ring SiC b 1 Rotating seal ring Shaft seal, complete, PTFE a 1 O-ring, front b 1 O-ring, back a 1 Rotating seal ring SiC b 1 Rotating seal ring

8 SP GB Sanitary Equipment, Headquarter Alfa Laval AB P O Box 73 SE LUND, Sweden Telephone: Fax: sanitary.equipment@alfalaval.com The information contained herein is correct at the time of issue but may be subject to change without prior notice.