Tilt Specify Tube Length & Bearing Color When Ordering Actual Diameter 9/16". Referred to as 5/8" in Trade. Tube. Bearing Rod.

Transcription

1 WB7900 Series Non Tilt & Referred to as in Trade. WB79-AT Series Tilt & Referred to as in Trade. TUBE BALANCES WB79-TO Series,, extension and Referred to as in Trade. Three Extensions Orange/Red- Sash load to 25 Lbs Blue- Sash load to 35 Lbs Black- Sash load for lbs Orange/ Red- Sash load to 25 Lbs Blue- Sash load to 35 Lbs Black- Sash load for Lbs S - 1- R - 2- RR - 3- Orange / Red - Medium Blue - Heavy Cross Pin WB14 used WB7900 Series For Double / Single Hung, Non-Tilt / Non-Take Out Style Windows WB7700 Series Non Tilt & Orange/Red- Medium WL-1 Tilt Latch -AT Double Prong WB1047 WB79 -AT Series WB77-IT Series Tilt & Orange/ Red-- Medium Extension Extension when ing WB213 WB77-TO Series & Orange/Red - Medium -AT Double Prong Cross Pin WB10 used accessory with WB7700 Series For Tilt Windows WB1042 WB77-IT Series WB202 used accessory with WB7700-TO Series

2 TUBE BALANCES / WINDOW CHANNELS WB7800 Series WB7400 Series ULTRA-LIFT BALANCE (Special Order) Makes 80-Lb Sash Easy To Lift! & & Color On Spring When Ordering tube length / weight / tilt or non tilt Please specify whether the rod has a number stamped on it (1,2,3 or 4) or advise us of the color of the nylon spiral rod bushing Number Actual Diameter. Referred to as in Trade. WB411 WB7800 Series Vinyl White Nylon Caradco Replacement White Nylon White Vinyl Please specify color on spring when inquiring: Brown, Gray, Green, Red or Yellow lbs per pair capacity Available Maximum Extended : 2 X length Minus 1-41/64" Dia. Please specify sash weight Ultra-Lift Travel Characteristics Rigid Gray PVC Vinyl WB-651 Tilt Bracket Gray tube is standard for all WB7800 Series balances. All other tube colors must be special ed. WB Non tilt Fast Fix Window Springs For Double Hung Windows Eliminates broken sash cords. When sash cords break or windows rattle, insert the spring between the window frame and the sash and nail in place. Once installed, the spring will hold the window in position. Sold by pair /8" 3/4" Lifts 70% of sash weight vs AAMA's 40% minimum. Useable with both tilt and non-tilt windows. Fits most C-20 and HC-40 AAMA-Grade single and double hung windows. Fits most large architectural wood windows. Call Customer Service for more details. WB6000 SERIES 3/8 TUBE BALANCE / Pawl (1/2 Increments) 3/8 19/64 1 WB0037 End WB7000 SERIES 5/8 PLASTIC TUBE BALANCE diameter 9/16 but considered 5/8 in the trade (1/2 Increments) Guide 9/16 Limited stock available for WB6000 series and WB7000 series balance. Black tube is standard. Gray may be available on balances in warehouse. Contact Customer Service for availability. Possible substitute: WB0037 end guide attached to WB7700-TO Series or WB7900-TO Series. See page.

3 CB8500 Series Vinyl Jambliners Full Tilt Systems CB8500 Series - For Sash Thickness - Wood Frames CB8800 Series - For 1- Sash Thickness - Wood Frames CB8800 Series Vinyl Jambliners FULL TILT BALANCES Caution: Our jambliners are square cut. Sill degree of angle to be determined at job site " Min. Opening 3- Approx. 6" to 8" Approx. 6" to 8" Frame Jamb Preparation For Bracket Application Place end of bracket against blind stop. NOTE: Do not drive staple too tight. A small amount of free play in the bracket is desirable. Place vinyl jambliner against brackets and snap into place. X X 16 gauge staple. Additional brackets will be furnished for larger glass heights. Frame Applications And Sash Prefit FRAME APPLICATIONS AND SASH PREFIT Standard Check Rail Opening Minus 1- Opening Minus 2.31 CRITICAL INFORMATION (REQUIRED) WHEN IDENTIFYING FULL TILT & NON-TILT BALANCE SYSTEMS 1. Overall Opening 2. Visible Glass Height (upper) 3. Visible Glass Height (lower) 2 4. Sash Weight 5. Color: White or Beige 6. Sash Thickness 7. Series *Caution: When converting an old style wooden sash to a newer style Full Tilt or Jambliner System, modifications may be required. * * Standard Sash Thickness - For CB8500 Series & 1- For CB8800 Series. 3 1

4 WB-3 3/16" 19/3 17/3 1/8" 1- WB-10 WB-11 WB-14 WB /3 23/3 TUBE BALANCE ACCESSORIES 1-3/16" 2-1 7/8" WB-4-Spec w/ WB-4 loop spring 11/3 7/3 WB-22 WB-202 WB-411 replacement WB-436 WB-616 may differ 5/3 1/8" slightly from 3/3 UNIQUE original 2-13/16" 1-1/16" 1-3/16" 1- w/ rivet WB-618 WB-627 WB-634 WB-643 WB-644 7/16" 27/3 17/3 15/3 3/4" 13/16" WB-618-AT WB-646-L/R WB /3 WB WB WB-657 Plunger 2-1/3 2-1/16" 2-3/4" 7/8" WB /3 Black 17/3 Tan Used with Used with WB-664 WB-1042 WB WB-1047 WB77-IT Series WB79-AT Series Front 1 1-9/3 View width 1- Red Anti draft black WB-1059 WB-1064 For Crestline WB-1073 WB-1083-Upper 3 pc. foot assembly 1" Black only 1-1/8" 1-1- Back View For spring, WB7500- Spring 1-1/8" Assy includes (1) of each piece shown 11/3 1 White 1-25/3 Cast zinc replacement Pivot Bar 1-13/16" WB-1083-Lower 17/3 WL / /64" Blue

5 SASH PULLEYS & ACCESSORIES Constructed with solid brass, 1/8" thick face plate, ball bearing solid brass wheel, & stamped steel housing. Model Face Plate Width Face Plate Mount Hole Centers 571-A (1-1/4 ) (6-25/34 ) (5-3/16 ) Now manufactured by Blaine 571-B C (1-1/4 ) (1-1/8 ) (5-37/64 ) (5-7/16 ) (4-1/2 ) (4-1/2 ) (4-3/8 ) 571-D (1-3/32 ) (4-15/16 ) (4 ) Designed to meet the needs of custom high-end window fabricators building large and heavy sash, and enables the use of diameter or square counterweights in most applications. The standard finish is satin lacquered brass. Other finishes are available. Constructed with cast housing and wheel, steel axle and operating with chain or rope. Available in red bronze (010) and nickel bronze (029). Model 571-A A-010 Face Size 1- x 6- Wheel Diameter 3" Sash Weight lbs. 'A' Dimension 2- 'B' Dimension 5-3/16" 571-B B x 5-3/4" lbs C C /8" x lbs D D-010 1" x 5" lbs. 1-4" 571-E E-010 1" x lbs Sash Weights 571-WT-1-1/ high 571-WT " high 571-WT high Available in 1-1/2 lb, 2 lbs & 8 lbs Designed to be stacked in combination to achieve desired weight.