Shipment locations: institutions stated below.

Transcription

1 institutions stated below. The successful bidder shall be responsible for all costs relative to any exchanges, including, but not limited to, shipping and handling, transportation arid handling fees. NLCCW Clarenville, NL A5A 1E9 1 Duffitt Place AOP leo Happy Valley - Goose Bay, NL 1 Clarence O Dell Memorial Drive Labrador Correctional Centre A2N3B5 P.O. Box Massachusetts drive West Coast Correctional Centre Stephenville, NL Shipment locations: Officers should contact Deborah Scott at or a member of the Uniform Committee Any company wishing to be considered for future uniform tenders for Correctional The successful bidder shall supply a set of sizer s for the full range of sizes available and will be responsible for all costs for transportation and or shipping to and from the

2 Corner Brook Lock Up 9 University Ave P0 Box 2006 Corner Brook, NL, a2h-6j8 Canada Her Majesty s Penitentiary 89 Forest Rd St. John s, NL A1C5W4 Bishop s Falls Correctional Centre P.O. Box Main Street Bishop s Falls, NL AOH 1CO NO SUBSTITUTE PATROL OFFICER JACKET 3 in 1 REVERSIBLE BOMBER STYLE JACKET with SOFT SHELL LiNER Outdoor Outfits Style # 1160 BOMBER STYLE JACKET GENERAL DESIGN Waist-length with snapped double storm flaps over front zipper, and back elasticized waistband. Waterproof Jacket with breathable shell fabric exceeding the following: The reverse side features CSA Z M silver striping. Full body and sleeve removable inner jacket Telescopic sleeves in Black and plain set-in sleeves in lime side Permanent epaulets on Black and lime side

3 8 inches. Two lower inverted pleated two-way opening patch pockets Width: 7.25 inches, depth: Black Outer Shell: POCKETS COLLAR the front. There is a hanger loop at each side of jacket. Permanent collar is made of two plies of the basic black shell plus the interlining. The back of the collar measures approximately 4 /2 inches wide, tapering to 4 inches at Spring Snaps: 20 line, non-rusting, on pocket corners Spring Snaps: 24 line, non-rusting, heavy-duty closure, flat black cap SNAPS FRONT ZIPPER: length varies by size VisIon # 8, 2- way, Reversible slider, Canadian SIDE ZIPPERS: 10 VisIon #5, 1 way, Reversible slider, closed end, black BACK BOTTOM: 16 Nylon coil #3, 1 way, Invisible, closed end, black UPPER SLEEVE SEAM ZIPPER: 8 Nylon #3, closed end, black RIGHT BLACK POCKET ZIPPER: 5.5 Nylon coil #3, iway, closed end, black open end, black ZIPPERS Cloth Type: 100% polyester non-woven, Weight: 2.5oz per sq. yd. INTERLINING (Collar, epaulets, pocket flaps, cuff, front waistband and front fly are interlined) All seams and points shall be sealed from the inside with waterproof seam sealing tape SEAM TAPE CSA Z96-09 compliant HI-VIS LIME 100% Polyester 3.8 oz./yd 2 ( oz./yd2) with soil REVERSE SHELL FABRIC release 5.3 oz. /sq. or more than 5.8 oz. /sq.) Taslan 3-ply nylon, Black (Shell to be durable and flexible and shall weight not less than OUTER SHELL FABRIC be easily sewn on as required to both sides of the outer jacket Invisible zipper at the back bottom of the jacket to allow emblems and other insignia to Half way elasticized cuffs with hook and loop Velcro tabs Microphone loops on both left and right chest in black and lime Zippered side vents with adjustable snap tabs The right side black pocket has an inner zippered pocket. Lower inverted pleat patch pockets with mitered flaps at Black and lime side of jacket.

4 FRONT EPAU LETS CUFF The pocket flaps are fastenedb y Hook and Loop Velcro measuring 1 X 2 sewn on the There is a hidden zippered inr pocket in the right side pocket. All stress points in pockets ae securely bar tacked. Two lower pleated two-way opening patch pockets Pocket flaps made of two p1s of shell fabric and interlined Width: 7.75 inches Depth: inches. Reversible Hi-Vis Lime: tricot for added warmth. underside of the flap and a coccealed spring snap on each corner of the flap. Width: 7.5 inches, depth: 7.5 Pocket flaps made of two pliescf shell fabric and interlined The side opening of each poct measure 51/z to 6 inches, and is lined with brushed All stress points in pocketsare securely bar tacked. Cuff is made of the basic black shell with woven elastic and the interlining with hook & Reversible Hi-Vis: the seve is one-piece construction, and set-in sleeve style. movement. coat style set-in sleeves hoorporating Telescopic sleeve system to allow ease SLEEVES 2 in width and 12 in lenth when relaxed and approximately 14 when extended. tricot for added warmth. loop Velcro strap for adjustment. underside of the flap and aco ncealed spring snap on each corner of the flap. 3 inches at the center. The cgers of flaps are mitered and the left flap has a pencil slot. 3 inches at the center. The CD rners of flaps are mitered and the left flap has a pencil slot. The pocket flaps are fastemci by Hook and Loop Velcro measuring 1 X 1 sewn on the The side opening of each pcdket measure 5½ to 6 inches, and is lined with brushed Half way elasticized cuff svith adjustable hook and loop Velcro tabs. The cuff measures Black Outer Shell: the si e9ve is a two-piece construction with elasticized anchor, and Black Outer Shell: Fixed pauiets are made of two plies of the Black shell fabric and to 2 inches by 7 14 lnchs long. The point of the epaijts will finish at the collar-joining seam of the coat. EPAULETS Reversible Hi-Vis: Fixed epaulets are made of two plies of the black or lime shell fabric and interlined, fasten,d with a snap at the point, and measure 2 1/4 inches wide tapering 2 1/4 inches wide tapehog to 2 inches. and the length is 7 1/4 inches long. interlined, fastened WiLi 24 line spring snap metal on shoulder. The epaulets measure Width: 7.75 inches Depth:

5 The flaps extend from top of collar points to the bottom hem of coat. 27 inches long. Unisex sizing XS-4XL in regulars, shorts & tall Back Length: Regular 26 ; + 2 for Tall and -2 for short Sleeve length: + 1 1/2 for Tall and - 1 1/2 for short SIZES locations designated by the agency. Emblems are supplied by the using agency and sewn on by the manufacture in the EMBLEMS lime side of the jacket. allow access to sew on patches to the front and back if needed for both the black and Hidden 8 inch Nylon zippered openings on each arm to allow access to sew on flashes Hidden 16 inch Nylon zippered opening at the bottom of the back of the outer shell to and rank if needed for both the black and lime side of the sleeves. ACCESS ARM & BACK ZIPPERS SCOTCHLITE PACKAGE an X across at the back extending from shoulder to bottom stripe (waist). each front, horizontal stripes at the front and back bottom, around lower sleeves, and 3M SCOTCHLITE 2 Sew-on tape on Reversible Hi-Vis Side Only. Vertical stripes at Elasticized back waistband in separate black shell fabric, measuring 2 ½ wide. WAISTBAND match the position of the stud on the tab to hold the tab when not in use on the back of when the vent is open. The zipper has a Reversible slider to be used for the both side of jacket. equipment belt. stud at the end of the tab. The female portion of the snap is through the waistband to the jacket. Another female snap will be set through the front waistband to secure the tab 10 inch Nylon zippered side vent openings at each side to allow access to weapons or Each elasticized side tab set in the bottom hem on the back of the jacket, with a snap The elasticized side tab measures 1 in width, and 4 ½ in length when it is relaxed and SIDE VENTS 7 1/a inches when the elastic is extended. 2 1/2 inches wide by 27 inches long, and the fly on lime side measures 2 inches wide by Two storm flaps are over the front zipper with five snaps. The fly on navy side measures

6 SOFT ShELL Jacket (UNER) SOFT SHELL FABRIC Color: Black 100% Polyester twill, 330 gmjmt2, Synergi-Micropolar LX2S, with a waterproof breathable membrane, Ultra-guard soil resistance finish and an ANTI-ODOUR treatment. Water Repellency - 100% initial, 90% after 3 washes, 70% after 20 washes (CGSB 26.2) Water Resistance to Penetration-{mm): (GAN.GGSB-4.2 No ) Water Vapor Transmission (g/m2124h): 3500 (ASTM E 96/E 96M-05) GENERAL DESIGN Waist-length with plastic zippered front closure Soft Shell liner is designed to be worn independently or layered under the outer shell jacket. There are two lower zippered hand pockets with 7 inches plastic zippers. There are two upper chest pockets on left and right side with nylon zippers. Princess body cut for the ideal body shape of jacket Zippered side vents with adjustable snap tabs The bottom hem is bounded with black Lycra binding tape. KNITTING YARN: Single ply 450 denier 100% continuous filament texturized polyester RIB:lxl Color: Black ZIPPERS FRONT ZIPPER: 26 # 5, 1 way, Canadian open end, color black SIDE ZIPPERS: 10 coil # 5, 1 ways closed end, color black LOWER POCKET ZIPPER: 7 #5, 1 way, closed end, color black UPPER CHEST POCKETS: 5.5 coil # 5, 1 way, closed end, color black SPRING SNAPS ALL SNAPS: 24 ligne, non-rusting, flat black COLLAR Permanent collar is made of two plies of fleece. Collar measures 3 1/4 wide at center back neck. POCKETS There are two welted slash pockets with 7 inches zippered opening on the lower front of the jacket. The welt measures 1 inch wide by 7 inches long. There are two upper chest pockets with 5 ½ inches nylon zippers. SLEEVES

7 10 inch Nylon zippered side vent openings at each side to allow access to weapons or SIDE VENTS SPECIAL FEATURES at No Additional charge. These patches to be supplied by Her Majesty s Penitentiary. Patch Size: 4 xli Rectangle with Round Corners On the outer shell, both black and high visibility sides, the patch is to be sewn 3 from to be supplied and applied by the successful bidder. Corrections Patch (Back of Jacket in both Black and High Visibility shells and inner liner) charge. These items to be supplied by Her Majesty s Penitentiary.Apply Breast Patches Breast patch is to be sewn on the left chest of inner, outer and high visibility sections. the top of the pocket to the bottom of the crest and centered over the pocket. On the the outer shell. These measurements are based on Size XL and will vary according to jacket size. inner shell it is to be sewn touching the stitching line on the coat in the same location as Apply Shoulder Flashes to inner, outer and high visibility parts of jacket at no additional Back Length: Regular 26 ; + 2 for Tall and -2 for short Sleeve length: ½ for Tall and 1 1/2 for short Unisex sizing XS-4XL in regular, shorts & tall SIZES locations designated by the agency. Emblems are supplied by the using agency and sewn on by the manufacture in the EMBLEMS Permanent Epaulets are made from shell fabric. The epaulets measure 2 wide by 7 length with a spring snap opening at the point. EPAULETS Bottom hem is bounded with stretch Lycra binding tape in black. BOTTOM Plain back with princess seam BACK Double Welt over front zipper FRONT: The side tabs measure 1 inch wide by 5 inches long. when the vent is open. the position of the stud on the tab to hold the tab when not in use on the front of the Each side tab set in the bottom hem on the front of the jacket, and will have a snap stud equipment belt jacket. Another female snap will be set through the back waistband to secure the tab at the end of the tab. The female portion of the snap is through the waistband to match Cuffs are 2 width of knit storm cuff in black. The sleeve is one-piece and set-in sleeve style.

8 Material: Black Twill Lettering: Silver Reflective print Lettering Size: Corrections lettering to be 2 high and 1 0 wide in total.

9 CSA-Z96 (class 2) tape REVERSIBLE OUTER JACKET HI-VIS LIME SIDE STYLE: 1160 Front 2-way reversible zipper closure Double storm flap wi snap closure MeLI Microphone loop on both sides CSA-Z96 (class 2) Permanent epaulettes WI snap closure 2 piece set-in sleeve Hook and loop closure II NIX Pencil slot 2 way entry patch pocket (Side access hand warmer pockets) Adjustable side tabs wi snap closure to adjust the waist access to equipment Elasticized back Elasticized cuffs access to sew patches

10 REVERSIBLE OUTER JACKET SIDE STYLE: 1160 Permanent epaulettes Underarm zipper for ventilation Front 2-way reversible zipper closure Double storm flap WI snap closure 2 piece set-in sleeve CORRECTiONS Reversible zipper side open inçj for easy access to equipment Eyelets- Elasticized adjustable culls w/ hook and loop Elasticized back hem w/ snap closure to adjust the waist

11 SOFT SHELL INNER COLOR STYLE: 1160 JACKET Zipper front closure Zippered Chest pockets CORRECTI ONS Single welt zippered diagonal slash side hand warmer pockets Zippered opening Rib cuffs tabs w/ snap Elasticized binding for stretchable waist Snaps for adjusting waist

12 SIZING CHART Outdoor Outfits Style OUTER JACKET Garment Size J SHORT (suggested height 5 0 to 5 6 ) X-SMALL SMALL MEDIUM LARGE X-LARGE 2X-LARGE 3X-LARGE 4X-LARGE CBSleeve Length R 32 5/ /8 )34 1/2 35 1/8 35 % 36 3/8 37 A cklength R 24 ZZ_ I REGULAR 1 _Garment Size X-SMALL SMALL MEDIUM LARGE X-LARGE 2X-LARGE 3X-LARGE 4X-LARGE B Sleeve Length R ¾ 35 3/ / ¾ A BackLength R 26 TALL (suggested height 6 3 to 6 6 ) X-SMALL SMALL MEDIUM flarge X-LARGE 2X-LARGE 3X-LARGE 4X-LARGE /8 36Y 367/8 37Y NOTE: For S (Short) Take NOTE: lor T (TaIJ) Add /8 38Y4 39 3/8 40 A 28 1 off 1 1/2 in sleeve length and 2 in the back length. 1 1/2 in sleeve length and 2 in the back length.