Deodorant range.

Transcription

1 Deodorant range

2 Deodorant Deodorants and antiperspirants are becoming more than just functional products claiming to offer up to 72hr protection. We are now seeing claims around moisturisation, skin condition, calming, soothing, hair growth retardants and sweat deactivation. As such, this product category crosses over with skincare, so please refer to our separate leaflets for Moisturisation and Sensitive Skin. In addition to the performance of the formulation, packaging changes are becoming more apparent with Sure s move to condensed, smaller cans that last as long as a full size can. To help inspire you, we have summarised some of the actives we offer for this area below. Happy reading.

3 Australian Tea Tree Oil WS (INCI: Water, PEG 40 Hydrogenated Castor Oil, Polysorbate 20, Melaleuca Alternifolia (Tea Tree) Oil). Australian Tea Tree Oil WS is an aqueous micro-emulsion of Tea Tree Oil. It has broad spectrum antimicrobial and anti-inflammatory activities specially developed for products aimed at problem of skin and scalp. Recommended usage level: Skin Care: 5-10%; Aftersun Care: 5-10%; Hair Care and problem scalp: 5-10%; Toiletries: 5-10%; Deodorant: 1-5%; Preservative booster: 3% Dermofeel Easymuls Plus (INCI: Glyceryl Oleate Citrate). A powerful O/W-emulsifier for low viscosity and sprayable concepts. A single ingredient emulsifier that is cold-processable and effective at low dosage, without any co-emulsifier. Based on sunflower oil, it is suitable for palm oil free and vegan formulations. Recommended use level: 1 4% (as main emulsifier) and 0.5-1% (as co-emulsifier) Dermofeel TEC eco (INCI: Triethyl Citrate) is a natural antioxidant, deodorant, masking, and solvent agent. Recommended use level: 1% in combination with 1% Dermosoft GMC (INCI: Glyceryl Caprate). Dermofeel viscolid (INCI: Hydrogenated Vegetable Oil) is a natural oil thickener supplied as a powder with a melting point of approximately 60 C. It is used to convert liquid oils into soft, creamy textures. The resulting product is an elegant soft oil paste that is easy to apply on the skin without smearing or dripping. It can be used in jars or with a pump dispenser. There is no influence on the sensorial profile of the oils which makes it ideal for massage oils. Dermofeel viscolid has been tested with various oils and is compatible with plant oils as well as ester oils, mineral oil and silicones. The thickening effect is based on a delicate network of fine lipid crystals that melts upon contact with the skin and forms a liquid phase with the sensorial profile of the oil mixture used. Recommended use level: 0.5 7% Dermosoft decalact (INCI: Sodium Caproyl/Lauroyl Lactylate) is a multi-functional co-emulsifier with excellent efficacy against microorganisms that cause skin disorders such as dandruff, skin odour and athlete s foot. The product is to 100% natural and can be used as an alternative to Octopirox, Triclosan and Climbazol. The product is ECOCERT registered. Recommended use level: 0.5 1% Dermosoft decalact deo (INCI: Sodium Caproyl/Lauroyl Lactylate; Triethylcitrate; Salvia Officinalis (Sage) Oil) is the first certified natural deodorant active that shows a clinically proven 24h deodorant effect. With public concern growing over many petrochemically derived ingredients (e.g. Triclosan), manufacturers are looking for natural alternatives that are as efficient as the synthetic ones. The performance of Dermosoft decalact deo has been proven in a clinical test to be superior to the synthetic benchmark Ethylhexylglycerine. It also displays an excellent toxicological profile, suitable for modern deodorant concepts. Recommended use level: 0.3 1% Dermosoft decalact liquid (INCI: Sodium Caproyl/Lauroyl Lactylate; Triethylcitrate) is a low viscous convenience blend based on Dermosoft decalact for easy handling with analogous antimicrobial properties. Recommended use level: % Dermofeel BGC (INCI: Butylene Glycol Dicaprylate/Dicaprate) is a skin friendly neutral oil component with high spreadability, low viscosity, and an excellent skin feeling. Recommended use level: 1 20% Dermosoft DGMC (INCI: Polyglyceryl-2 Caprate) is a co-emulsifier which can be used as a deodorant active ingredient due to its activity against gram-positive bacteria. Recommended use level: 0.5 1% Dermosoft GMC (INCI: Glyceryl Caprate) is a multi-functional, skin-friendly cosmetic raw material, which acts as a fatting, wetting, moisturising, and co-emulsifying agent. Effective for the biological stabilisation against yeast and bacteria. It can be incorporated into the oil- or water-phase. Recommended use level: 0.5 1%

4 Dermosoft SLL (INCI: Sodium Lauroyl Lactylate) is a co-emulsifier and stabilisation agent for foams, useful for a wide range of cosmetics. Due to its antimicrobial activity it also acts as a deodorant ingredient. An example of use is the treatment of Dandruff (Seborrhoeic dermatitis). Recommended use level: % ENNACOMPLEX 273 (INCI: Aqua, Propylene Glycol, Hamamelis Virginiana Extract, Pyrus Malus Leaf Extract, Quercus Robur Extract, Rosa Centifolia Extract) is a botanical complex particularly rich in Tannins; compounds known for their astringent, anti-pruriginous, anti-inflammatory, antiseptic, and antiseborrheic properties. The product tightens open pores, reduces sebaceous secretions and inflammation, and heals small cuts and blemishes. It is therefore especially intended to formulate preparations for the care of greasy skin with open pores, and acne prone skin with blemish problems. The ENNACOMPLEX 273 can also be used in aftershaves and after depilatory products. The product contains a balance blend of Hamamelis leaf, Oak bark, Apple leaf, and Rose flower extracts. Recommended use level: 3 12% HydroSal 1 Fragrance (Water, Fragrance, Polyvinyl Alcohol, Acrylates/C12-22 Alkylmethacrylate Copolymer, Phenethyl Alcohol, Caprylyl Glycol, Ethylhexylglycerin). HydroSal Fragrance is a time-release technology that provides extended fragrance release from water-based products. When applied to skin, fragrances are quick to evaporate, making their impact short-lived. HydroSal prolongs aroma intensity, provides a water-triggered bloom, and can neutralise malodor. Suitable for water-based applications such as sprays, creams, and lotions. Recommended use level: % HydroSal 2 Fragrance (Propylene Glycol, Fragrance, Nonoxynol-9, Hydroxypropylcellulose, Phenoxyethanol, Ethylhexylglycerin). HydroSal Fragrance is a time-release technology that provides extended fragrance release from water-based products. When applied to skin, fragrances are quick to evaporate, making their impact short-lived. HydroSal prolongs aroma intensity, provides a water-triggered bloom, and can neutralise malodor. Suitable for clear, hydroalcoholic applications such as perfumes and colognes. Recommended use level: % HydroSal BKC (INCI: Water, Polyvinyl Alcohol, Benzalkonium Chloride, Ethyl Alcohol, Phenoxyethanol, Ethylhexylglycerin, Acrylates Copolymer). BKC (Benzalkonium Chloride) extends protection from microbes, pathogens, bacteria, viruses, fungi, and protozoa. It has consistently been the disinfectant of choice for hospitals. HydroSal BKC was designed to achieve a better utilisation of BKC, while replacing alcoholbased antiseptics, at low concentration. HydroSal BKC is an encapsulation technology comprised of sub-micron spheres approximately 0.1 to 0.3 microns in diameter. These spheres are infused with BKC and form a clear product. The HydroSal technology allows for time release and longerlasting effects, extending the time of protection from microbes. The product is effective upon application. In addition, it can be re-activated long after initial application, when exposed to water or perspiration. The shell is able to assemble and lock in the BKC while drying. Once in contact with water after drying out, the shell dissolves and exposes the BKC again. This feature allows the system to provide maximum protection in areas that are exposed to cycles of dampness and dryness. The protection is needed most in damp/wet conditions because these conditions are favourable for bacteria growth, such as the under arm and foot. Suitable for sanitisers, disinfectants, anti-acne applications such as lotions and sprays, mouth washes and cleansers. Recommended inclusion level: % MultiSal Menthol 30 (Sodium Starch Octenylsuccinate, Menthol, Butyrospermum Parkii (Shea Butter) Extract, Euphorbia Cerifera (Candelilla) Wax, Hydrated Silica). MultiSal Menthol is specifically designed for anhydrous applications that require a higher temperature in processing, for instance soap bars or solid AP sticks. Menthol evaporates at typical processing temperatures (around 80 C).The consequences of this are twofold: 1. Menthol vapor is irritating to eyes and lungs, thus filling the production environment with it is unsafe; 2. Menthol is lost, either reducing the concentration in the final product, or making it necessary to use more to make it the right concentration. MultiSal Menthol protects the active from evaporation, even under elevated temperatures (up to 160 C). Additionally menthol has a natural, medicinal odor that may be undesirable for certain applications. MultiSal Menthol reduces the unpleasant menthol odor making it more satisfying to the consumer. Suitable for anhydrous applications such as lotions, body powders, foot care, lip care, analgesics, soap bars, and deodorant sticks. Recommended use levels: Lip care: 1%; Skin care: 2-5%; Pain relief: 4-8%; Foot care: 7-20%

5 MultiSal Naturally Smooth (INCI: Maltodextrin, Salix Alba (Willow) Bark Powder, Colloidal Oatmeal, Sodium Bicarbonate, Hydrated Silica (amorphous), Glycyrrhiza Glabra (Licorice) Root Extract, Carica Papaya (Papaya) Fruit, Bromelain) Encapsulated salicylic acid (SA) is best known for the treatment of dermatitis, acne, psoriasis, calluses, and more. It works as a keratoic, comedolytic and bacteriostatic agent, causing the cells of the epidermis to shed more readily, opening clogged pores and neutralising the bacteria within. The active ingredients that help to treat these skin conditions are papyia, bromelien, and suprapein. The MultiSal technology provides extended release onto the skin, exposing the skin to small amounts of SA overtime. This unique feature allows higher levels of SA to remain on the skin for several hours, for better efficacy and acne-fighting power without irritation. An important benefit of the MultiSal technology is enhanced efficacy from a rinse-off application. The cationic charge of the shell s surface provides superior adhesion onto the skin. This benefit makes it a valuable technology for products that are rinsed off the skin shortly after application. Recommended use level: Cosmetic: Up to 1.67, OTC: , Rx: Over reinforces the skin s own natural defences. Recommended use level: 0.5-3% SalScent (Propylene Glycol, Nonoxynol-9, Hydroxypropylcellulose, Polyvinylpyrrolidone, Beta-Cyclodextrin, Polyvinyl alcohol, Sodium carboxymethylcellulose, Phenoxyethanol, Ethylhexylglycerin). SalScent is customisable fragrance technology that increases fragrance value by boosting longevity, releasing on demand and easing formulation. It can easily be employed in clear water or hydro-alcoholic bases without the need for any specialised equipment. Provides moisture triggered bursts, making it ideal for deodorant products (perspiration triggered). For maximum longevity, a ratio of 1:2 (neat fragrance: SalScent ) is recommended. SKINVEIL 500 (INCI: Sericin) is a Seresin protein extracted as a waste biproduct from the production of Silk. Unlike other proteins of this nature, the full molecular weight is maintained by extracting the material through a patented precise process, thus ensuring a minimum size of 500 kda. The exceptionally large size confers a bioactivity to the molecule that is lacking in smaller, degraded proteins from a similar source. Its high level of purity is obtained through a precisely controlled pharmaceutical grade lyophilisation process. SKINVEIL 500 helps to soothe skin irritation, visibly calms redness, restores Epidermis protection and

6 Interested? Then please call one of our team for more information... Andrew Goodwin Managing Director T: M: E: Clare Goodwin Technical Sales Director T: M: E: W: infinity-ingredients.co.uk