Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet 1. Chemical Product and Company Identification Product Name: LOCK N POP Product Codes: 3228 General Use: A liquid cohesive applied to the exterior of packages during stacking operations for creating bonds to maintain stability for movement and shipping. Manufacturer: Key Tech Corp th Ave W. Suite A Lynnwood, WA Telephone: Fax: Composition/Information on Ingredients Component CAS Number % by Weight Water >56 Synthetic Polymers (Non-hazardous) Proprietary <31% Other non-hazardous materials Proprietary <13% Ammonium Hydroxide-Aqueous, <.20% unreacted (PA, NJ, MA) 5-Chloro-2-methyl-4-isothiazolin-3-one <0.01% 3. Hazards Identification Acute Health Effects Swallowed May cause nausea, abdominal discomfort. Eye May cause moderate irritation Skin Prolonged or repeated contact may cause moderate irritation. Inhaled May cause moderate irritation.

2 MATERIAL SAFETY DATA SHEET page 2 4. Emergency First Aid Measures Inhalation Remove to fresh air. If breathing is affected, get medical attention. Ingestion Rinse mouth out with water. Do not induce vomiting. If irritation develops seek immediate medical attention. Eye Contact If this product comes in contact with the eyes immediately hold the eyes open and wash with fresh running water for minutes. Ensure irrigation under the eyelids by occasionally lifting upper and lower lids. The removal of contact lenses after an eye injury should only be undertaken by skilled personnel. If irritation persists get medical attention. Skin Contact If product comes in contact with the skin remove all contaminated clothing, including footwear. Wash affected areas thoroughly with soap and water. Seek medical attention in event of irritation. 5. Fire Fighting Measures and Explosion Hazard Data General Information This material is not combustible under normal conditions. However, it will breakdown under fire conditions and the organic component may burn. Not considered to be a significant fire risk. Flash Point: None Flammable Limits: Not Available Autoignition Temperature: Not Available Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog Special Fire Fighting Procedures: Cool and use caution when approaching or handling fire-exposed containers. Fire fighters should wear self-contained breathing apparatus and protective clothing. 6. Accidental Release Measures Spills Clean up all spills immediately. Do not let spilled or leaking material enter watercourse. May be toxic to aquatic life. Contain and absorb spill with oil-dri or similar inert material. Place in a suitable labeled container for waste disposal. Avoid contact with skin and eyes. Control personal contact by using protective equipment.

3 MATERIAL SAFETY DATA SHEET page 3 7. Handling and Storage Precautionary Information Avoid contact with eyes. Avoid prolonged contact with skin. Suitable Container Plastic container or packaging as recommended by manufacturer. Check that containers are clearly labeled. Storage and Incompatibility Avoid contamination of water, foodstuffs, feed or seed. Storage Requirement Store in original container. Keep container securely sealed. Store in cool, dry, ventilated area. Do not allow to freeze. Store away from incompatible materials. Protect containers against physical damage and check regularly for leaks. Observe manufacturer s storing and handling recommendations. 8. Exposure Controls and Personal Protection Engineering Controls Use in well ventilated areas. General exhaust is adequate under normal operating conditions. Personal Protection Eye Safety glasses with side shields or as required, chemical goggles. Contact lenses pose a special hazard, soft lenses may absorb irritants and all lenses concentrate them. Hands/Feet Barrier cream with polyethylene gloves or rubber gloves, safe footwear. Other Overalls, eyewash unit. Respirator Respiratory protection equipment suitable to work conditions and environment. 9. Physical and Chemical Properties Appearance: Odor: Boiling Point (deg C): Melting Point (deg C): Vapor Pressure (kpa): Dark, Clear, Amber Liquid Ammonia odor Not Available Not Available Not available Specific Gravity: 1.11

4 MATERIAL SAFETY DATA SHEET page 4 Flash Point (deg C): Lower Explosive Limit (%): Upper Explosive Limit (%): Solubility in water: Not Flammable Not applicable Not applicable Miscible ph: Total VOC s: <0.15% 10. Stability and Reactivity Stability: Stable Hazardous Polymerization: Will not occur Hazardous Thermal Decomposition Products: Produces normal products of combustion Hazardous Polymerization: Will not occur Hazardous conditions to avoid: None known 11. Toxicological Information Oral LD50: Dermal LD50: Inhalation LC50: >5000mg/kg Not available Not applicable Subchronic Effects/Carcinogenicity The product represented by this MSDS has not been tested for subchronic toxicological effects. Chronic Effects/Carcinogenicity The product represented by this MSDS has not been tested for chronic toxicological effects. Mutagenicity The product represented by this MSDS has not been tested for mutagenic toxicological effects. Reproductive Effects The product represented by this MSDS has not been tested for reproductive toxicological effects.

5 MATERIAL SAFETY DATA SHEET page Ecological Information Environmental data: May be toxic to aquatic life. Chemical Fate Information: No data available 13. Disposal Considerations Dispose of in accordance with local regulations for non-hazardous materials. 14. Transport Information Ground Transport (DOT) Liquid Adhesives NOI NMFC 4620 sub 5 Class 60 Air Transportation (LATA) Liquid Adhesive NOI NMFC 4620 sub 5 Class 60 Ocean Transport (IMOC) Other Prepared Glues and Adhesives H.S Regulatory Information United States Canada TSCA Status: In compliance California Proposition 65: Not subject to reporting Pennsylvania Hazardous Substance List: Subject to Reporting (Ammonia) New Jersey Right to Know Hazardous Substance List: Subject to Reporting (Ammonia) Massachusetts Hazardous Substance List: Subject to Reporting (Ammonia) FDA Status: Ingredients are approved under 21 CFR and USDA Status: This product is not intended for use where it is directly applied to food products. As such it does not require approval by USDA for prescribed use as cohesive to be applied to the exterior of primary or secondary packaging. CONEG Status: The sum of the concentrations of lead, cadmium, mercury, and hexavalent chromium is less than 100 part per million on a dried weight basis. WHMIS Classification: D,2B

6 MATERIAL SAFETY DATA SHEET page 6 Canadian Domestic Substance List: Listed

7 MATERIAL SAFETY DATA SHEET page 7 European Classification: Non hazardous EINECS Status: In Compliance 16. Other Information HMIS Ratings: Health 0, Flammability 0, Reactivity 0 NFPA Ratings: Health 0, Flammability 0, Reactivity 0 End of Material Safety Data Sheet