Surfactant Concentrate Iselux SLC

Transcription

1 Surfactant Concentrate Iselux SLC INCI Name: Water (and) Sodium Lauroyl Methyl Isethionate (and) Sodium Lauroamphoacetate (and) Cocamide MIPA (and) Sodium Benzoate Iselux SLC is a concentrated surfactant blend developed for use in formulating structured sulfate-free personal care products. It is an optimized blend designed for use in cleanser formulas where the addition of a high level of oils or otherwise incompatible materials is desired. This concentrate allows a formulator to quickly and easily develop stable finished formulations. It is ideal for use in body washes, shampoos and hand washes. This blend is free from sulfates, EO, amides, and is readily biodegradable. All of its components are derived from natural, readily renewable resources (plant derived) Performance Benefits Structured liquid concentrate with a unique rheology profile that provides lotion and cream-like textures. Unlike many structured systems, it is stable under freeze/thaw conditions. Mild and provides a dense, luxurious lather while leaving behind an elegant after-feel on skin and hair. Exceptional performance and stability in the presence of high levels of oils and fragrances, high density particles, high molecular weight polymers, and other cationic ingredients. Easy to use and can be cold-processed. T YPICAL PROPERTIES Not intended for use in preparing specifications C Total Solids, % Color, Gardner Clear to slightly hazy liquid 44 minimum 4 maximum ph (as is) Viscosity, C 3000 maximum Typical use levels range from 40-50% (as is). Aids in retention of hair color. Foam Properties Iselux SLC allows for superior lather and foam quality in a formulation. As demonstrated in a foam cylinder test, an Iselux SLC formulation containing 20% canola oil shows initial flash foam as well as the outstanding foam stability after 5 minutes of standing.

2 Initial Flash Foam 5 minute Foam Exfoliating Bodywash Featuring Iselux SLC AC198 INCI ingredients Trade name (supplier) A Water Guar Hydroxypropyltrimonium Chloride q.s to Activsoft C-17 (Innospec) Citric Acid (50% soln) B Trisodium Ethylenediamine Disuccinate Isethionate (and) Sodium Lauroamphoacetate (and) Cocamide MIPA (and) Sodium Benzoate 0.20 Trace Natrlquest E30 (Innospec) C Sodium Chloride D Water (and) Sodium Lauroyl Methyl % w/w Iselux SLC (Innospec) 50.00

3 E Glycerin 1.60 Xanthan Gum Keltrol CG-T (CP Kelco) 0.40 Cellulose Gum Cekol (CP Kelco) 0.40 F Canola Oil G Preservative, dye, fragrance q.s. H Citric Acid (50% soln) 3.00 I Carnauba Wax & Chlorophyllin-Copper Complex CB Carnauba Green (Lonza) 2.50 Preparation Procedure 1 Prepare phase A with gentle mixing. Once completely dispersed, add trace amounts of citric acid solution until mixture clears. 2 Add phases B and C while continuing to slowly mix. 3 Slowly blend in phase D and mix until uniform. 4 Begin premixing phase E and once uniform, add to main system. 5 Continue to mix until uniform. 6 Blend phase F into the system. 7 Add compatible preservative, dye(s) and fragrance. 8 Adjust ph of system to with citric acid solution (50% aqueous) as required. System should thicken noticeably with ph adjustment. 9 Mix gently for at least 15 minutes to reach final consistency. 10 Add phase I and incorporate with gentle mixing. Properties Appearance: White, cream ph: Viscosity*, cps: 30,000-45,000 *Brookfield 5.0 rpm, 25 C

4 2-in1 Conditioning Shampoo Featuring Iselux SLC AC199 Preparation Procedure INCI ingredients Trade name (supplier) % w/w A Water q.s to Guar Hydroxypropyltrimonium Chloride Activsoft C-17 (Innospec) 0.40 Citric Acid (50% soln) Trace B Trisodium Ethylenediamine Disuccinate Natrlquest E30 (Innospec) 0.50 C Sodium Chloride 3.00 D Water (and) Sodium Lauroyl Methyl Iselux SLC (Innospec) Isethionate (and) Sodium Lauroamphoacetate (and) Cocamide MIPA (and) Sodium Benzoate E Glycerin 2.40 Xanthan Gum Keltrol CG-T (CP Kelco) 0.60 Cellulose Gum Cekol (CP Kelco) 0.60 F Canola Oil 2.00 Dimethicone, Laureth-4 and Laureth-23 G Preservative, dye, fragrance Dow1664 EMULSION (Dow Corning) 4.00 q.s. H Citric Acid (50% soln) Prepare phase A with gentle mixing. Once completely dispersed, add trace amounts of citric acid solution until mixture clears. 2 Add phases B and C while continuing to slowly mix. 3 Slowly blend in phase D and mix until uniform. 4 Begin premixing phase E and once uniform, add to main system. 5 Continue to mix until uniform. 6 Blend phase F into the system. 7 Add compatible preservative, dye(s) and fragrance. 8 Adjust ph of system to with citric acid solution (50% aqueous) as required. System should thicken noticeably with ph adjustment. 9 Mix gently for at least 15 minutes to reach final consistency.

5 Properties Appearance: White, cream ph: Viscosity*, cps: 30,000-45,000 *Brookfield 5.0 rpm, 25 C For further information, please your region: Americas: americas-ac@innospecinc.com Europe, Middle East and Africa: emea-ac@innospecinc.com Asia-Pacific: aspac-ac@innospecinc.com The facts stated and the recommendations made are based on our own research and/or the research of others, and are believed to be accurate. No guarantee of their accuracy is made, however, and unless otherwise expressly provided by law or in written contract, the materials are sold without warranties, expressed or implied, in particular without guarantee as to suitability for particular purpose. Innospec assumes no responsibility for injury or damage to users or third parties. Recipient agrees to assume all risk and liability whether used singly or in combination with other materials. Issue No. 01/2013