MATERIAL SAFETY DATA SHEET

Transcription

1 MATERIAL SAFETY DATA SHEET Tech Spray Water-based SMT Stencil Cleaner Date-Issued : 10/12/2005 MSDS Ref. No : 1692-PT/G Date-Revised : 10/13/2005 Revision No : New MSDS 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Tech Spray Water-based SMT Stencil Cleaner PRODUCT DESCRIPTION: Water-based stencil cleaner for use in printing machines PRODUCT CODE: 1692-PT/G MANUFACTURER Techspray, L.P N.W. 1st Street P.O. Box 949 Amarillo, TX Contact: Chemtrec Product Stewardship: HR. EMERGENCY TELEPHONE NUMBERS CHEMTREC (US Transportation) : (800) CANUTEC (Canadian Transportation) : (613) Emergency Phone : (800) COMPOSITION / INFORMATION ON INGREDIENTS Chemical Name Content CAS EINECS Non-hazardous water-based blend of polar and nonpolar constituents (modified alcohols) N-ON-E 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW IMMEDIATE CONCERNS: Very mild (if any) eye/skin irritant. POTENTIAL HEALTH EFFECTS EYES: Avoid contact with eyes; may cause redness, irritation and conjunctivitis. SKIN: Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). SKIN ABSORPTION: No negative effects anticipated via absorption. INGESTION: Substance may be harmful if swallowed. INHALATION: No hazard in normal industrial use. SIGNS AND SYMPTOMS OF OVEREXPOSURE file:///c /Documents%20and%20Settings/ebrown/Desktop/MSDS/4793jov1.htm (1 of 5)2/9/2006 3:26:00 AM

2 EYES: Liquid splashed in the eye may cause redness, irritation and conjunctivitis. SKIN: Prolonged or exposure may cause skin irritation. INGESTION: Ingestion may result in diarhea and/or nausea. INHALATION: Vapor inhalation can result in headache, nausea, and coordination problems. ACUTE TOXICITY: Low hazard for usual industrial or commercial handling. CHRONIC: Frequent or prolonged contact may irritate the skin and cause a skin rash (dermatitis). 4. FIRST AID MEASURES EYES: Flush eye with water for 15 minutes. Get medical attention. SKIN: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical attention if symptoms occur. Wash clothing before reuse. INGESTION: If swallowed, do not induce vomiting. If conscious and alert, give two glasses of water. Seek medical attention. INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Seek immediate medical attention. 5. FIRE FIGHTING MEASURES FLASHPOINT AND METHOD: None EXTINGUISHING MEDIA: None Expected. 6. ACCIDENTAL RELEASE MEASURES SMALL SPILL: Absorb the liquid and scrub the area with detergent and water. Pick up wash liquid with additional absorbent and place in a disposable container. Do not flush to sewer. ENVIRONMENTAL PRECAUTIONS WATER SPILL: NEVER FLUSH TO SEWER. 7. HANDLING AND STORAGE GENERAL PROCEDURES: Follow all MSDS/label precautions even after container is emptied because they may retain product residues. HANDLING: Contents may develop pressure upon prolonged storage. Loosen closure cautiously before opening. Use only in a well ventilated area. STORAGE: Store in a cool place in original container and protect from sunlight. file:///c /Documents%20and%20Settings/ebrown/Desktop/MSDS/4793jov1.htm (2 of 5)2/9/2006 3:26:00 AM

3 8. EXPOSURE CONTROLS / PERSONAL PROTECTION ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any air contaminants to within their TLVs during the use of this product. PERSONAL PROTECTIVE EQUIPMENT EYES AND FACE: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid contact, wear splash-proof goggles. SKIN: Chloroprene or nitrile gloves are recommended for use with this product. RESPIRATORY: A respiratory protection program that meets OSHA and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. WORK HYGIENIC PRACTICES: Wash hands before eating and wash before reuse. OTHER USE PRECAUTIONS: Emergency shower and eyewash facility should be in close proximity. 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE: Liquid ODOR: Low odor. APPEARANCE: Clear, Colorless liquid ph: 5 to 7 VAPOR PRESSURE: 18.1 mbar BOILING POINT: (203 F) to (414 F) FREEZING POINT: (28.4 F) SOLUBILITY IN WATER: Soluble DENSITY: 0.99 VISCOSITY: 1.9 CST (VOC): 223 g/l (non-exempt VOC) 10. STABILITY AND REACTIVITY CONDITIONS TO AVOID: Avoid high temperatures. STABILITY: Stable under normal conditions. POLYMERIZATION: None HAZARDOUS DECOMPOSITION PRODUCTS: None INCOMPATIBLE MATERIALS: Oxidizing materials. 11. TOXICOLOGICAL INFORMATION ACUTE file:///c /Documents%20and%20Settings/ebrown/Desktop/MSDS/4793jov1.htm (3 of 5)2/9/2006 3:26:00 AM

4 ORAL LD : > 5000 mg/kg (rat) 50 Undiluted EYE EFFECTS: May be mildly irritating to eyes. SKIN EFFECTS: The mixture is a mild to severe skin irritant but is not a skin sensitizer in animals. CARCINOGENICITY: IARC: NOT listed NTP: NOT listed OSHA: NOT listed 12. ECOLOGICAL INFORMATION ENVIRONMENTAL DATA: There is limited information available on the environmental fate and effects of this material. The primary environmental concern for release is the impact on aquatic and terrestrial species. Due care should be taken to avoid the accidental release of this material into the environment. 13. DISPOSAL CONSIDERATIONS DISPOSAL METHOD: Federal, State, and Local laws governing disposal of materials can differ. Ensure compliance with proper authorities before disposal. 14. TRANSPORT INFORMATION DOT (DEPARTMENT OF TRANSPORTATION) by DOT ROAD AND RAIL (ADR/RID): AIR (ICAO/IATA) VESSEL (IMO/IMDG) 15. REGULATORY INFORMATION UNITED STATES SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT) 311/312 HAZARD CATEGORIES: NA = Not Applicable FIRE: NO PRESSURE GENERATING: NO REACTIVITY: NO file:///c /Documents%20and%20Settings/ebrown/Desktop/MSDS/4793jov1.htm (4 of 5)2/9/2006 3:26:00 AM

5 CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND LIABILITY ACT) CERCLA REGULATORY: None of the ingredients are CERCLA/Superfund hazardous chemicals. OSHA HAZARD COMM. RULE: Contents of this MSDS comply with the OSHA Hazard Communication Standard 29 CFR CLEAN AIR ACT 40 CFR PART 68---RISK MANAGEMENT FOR CHEMICAL ACCIDENT RELEASE PREVENTION: NOT listed OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) 29 CFR PROCESS SAFETY MANAGEMENT OF HIGHLY HAZARDOUS CHEMICALS: None of the chemicals in this product are considered highly hazardous by OSHA. CALIFORNIA PROPOSITION 65: This product does not contain any chemicals known to the State of California to cause cancer. 16. OTHER INFORMATION APPROVED BY: Pierce A. Pillon TITLE: Chemist REVISION SUMMARY New MSDS HMIS RATING HEALTH: 0 FLAMMABILITY: 0 PHYSICAL HAZARD: 0 PERSONAL PROTECTION: DATA SOURCES: Code of Federal Regulations (CFR) The Sigma-Aldrich Library of Regulatory and Safety Data OSHA Hazard Communication Standard (29CFR ) Various Federal, State and Local Regulations MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is accurate. However, neither Tech Spray, L.P., or any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards which exist. file:///c /Documents%20and%20Settings/ebrown/Desktop/MSDS/4793jov1.htm (5 of 5)2/9/2006 3:26:00 AM