... Issuing Laboratory:
|
|
- April Parrish
- 5 years ago
- Views:
Transcription
1
2 The submitted sample was tested under the following requirements requested by the applicant, subject to the information stated in the remark and attached page(s) for details : Requirement (1) U.S. ASTM F Physical and Mechanical tests (2) ASTM F Flammability Test of Materials other than textile materials (3) ASTM F Total Lead content (4) ASTM F Soluble heavy elements test Result Pass Pass Pass Pass (5) U.S. CFR Title 16 (CPSC Regulations) - Part Total Lead content in surface coating U.S. Consumer Product Safety Improvement Act 2008 Title I Section Total Lead content in surface coating Pass Pass (6) U.S. Consumer Product Safety Improvement Act 2008 Title I Section 101 Pass - Total Lead content in non-surface coating materials (substrate) ******************************************************************************************************************************************* Page 2 of 14
3 (1) Physical and Mechanical Tests Test Standard : ASTM Standard Consumer Safety Specification for Toy Safety F Age group for testing : For Ages over 4 years The submitted samples were undergone the use and abuse tests in accordance with the Federal Hazardous Substances Act (FHSA), Title 16, Code of Federal Regulations : - Test FHSA Parameter Compression test Section (g) 30 lbf Drop Test Section (b) 4 x 3.0 ft Tension test Section (f) 15 lbf Torque test Section (e) 4 in-lbf Clause Requirement Assessment 4.1 Material quality (visual check on cleanliness) P 4.5 Sound producing toys NA Toys intended for children under 36 months of age NA Mouth actuated toys NA Toys and games for 36 months to 72 months - Small part warning P 4.7 Accessible edges P 4.8 Projection NA 4.9 Accessible points P 4.10 Wires or rods NA 4.11 Nails and fasteners P 4.12 Plastic film NA 4.13 Folding mechanisms and hinges NA 4.14 Cords, straps, and elastics NA 4.15 Stability and overload requirement NA 4.16 Confined spaces NA 4.17 Wheels, tires, and axles NA 4.18 Holes, clearance, and accessibility of mechanisms NA 4.19 Simulated protective devices NA 4.20 Pacifiers NA 4.21 Projectile toys NA 4.22 Teethers and teething toys NA 4.23 Rattles NA 4.24 Squeeze toys NA 4.25 Battery operated toys NA 4.26 Toys intended to be attached to a crib or playpen NA 4.27 Stuffed and beanbag type toys NA 4.28 Stroller and carriage toys NA Page 3 of 14
4 Clause Requirement Assessment 4.29 Art materials NA 4.30 Toy gun marking NA 4.31 Balloons NA 4.32 Certain toys with nearly spherical ends NA 4.33 Marbles NA 4.34 Balls NA 4.35 Pompoms NA 4.36 Hemispherical shaped objects NA 4.37 Yo Yo elastic tether toys NA 4.38 Magnets NA 4.39 Jaw Entrapment in Handles and Steering Wheels NA 5 Labeling requirements P 6 Instructional literature P 7 Producer's marking - Name of producer / distributor Yes - Address Yes Abbreviation : P = Pass NA = Not Applicable The submitted samples were undergone the tests in accordance with section 8.5 through section 8.17 and 8.19 through 8.26 on normal use, abuse and specific tests for different types of toys whichever is applicable. Date sample received : May 19, 2015 Test Period : May 19, 2015 to May 21, 2015 (2) Flammability Tests Test Standard : Section 4.2 of the ASTM Standard Consumer Safety Specification for Toy Safety F Sample Ignition point Burn length (inch) Time (sec) Burn Rate Limit (inch/sec) (inch/sec) bike edge Date sample received : May 19, 2015 Test Period : May 19, 2015 to May 21, 2015 ********************************************************************************************************************************* Page 4 of 14
5 (3) Total Lead (Pb) Content Test Method : Sections (1) and (2)(a) of the ASTM Standard Consumer Safety Specification for Toy Safety F963-11, CPSC-CH-E , CPSC-CH-E or/and CPSC-CH- E , analysed by Inductively Coupled Argon Plasma Spectrometry. (I) Surface coating Tested Component Result in ppm Limit (ppm) (1) <20 90 (2) <20 90 (3) <20 90 (4) <20 90 (5) <20 90 (6) <20 90 (7) <20 90 (8) <20 90 (9) <20 90 (10) <20 90 (11) <20 90 (12) <20 90 (13) <20 90 (14) <20 90 (15) <20 90 (16) <20 90 (17) <20 90 (18) <20 90 (19) <20 90 (20) <20 90 (21) <20 90 (22) <20 90 (23) <20 90 (24) <20 90 ********************************************************************************************************************************* Page 5 of 14
6 (II) Non-surface coating Tested Component Result in ppm Limit (ppm) (25) < (26) < (27) < (28) < (29) < (30) < (31) < (32) < (33) < (34) < (35) < (36) < ppm = parts per million = mg/kg Tested Components : (1) #ACD-501 black coating on PVC plastic (head, belt, armor, tube of Stormtrooper Sergeant #B3717, tube of Elite Speeder Bike #B3718). (2) #ACD silver color coating on PVC plastic (head of Stormtrooper Sergeant #B3717, head of Stromtrooper #B3718). (3) #PS-501-F black coating on ABS plastic (torso of Stormtrooper Sergeant #B3717). (4) #ACD-501-F black coating on PVC plastic (hands, arms, legs, armor of Stormtrooper Sergeant #B3717, handle, seat pad of Elite Speeder Bike #B3718). (5) #ACD-102 white coating on PVC plastic (belt, gun of Stormtrooper Sergeant #B3717). (6) #ACD-501-S black coating on PVC plastic (gun of Stormtrooper Sergeant #B3717). (7) #PG yellow tampo coating on ABS plastic (body, front, legs of Assault Walker #B3717). (8) #PG deep green tampo coating on ABS plastic (front of Assault Walker #B3717). (9) #P deep green coating on ABS plastic (front of Assault Walker #B3717). (10) #PPD-1531 green coating on PP plastic (legs of Assault Walker #B3717). (11) #P grey coating on ABS plastic (body of Elite Speeder Bike #B3718). (12) #P silvery grey coating on ABS plastic (body of Elite Speeder Bike #B3718). (13) #PG red tampo coating on ABS/PP plastic (body, cover of Elite Speeder Bike #B3718). (14) #PPD-501 black coating on PP plastic (cover of Elite Speeder Bike #B3718). (15) #PPD-1589 metallic black coating on PP plastic (rifle of Elite Speeder Bike #B3718). (16) #PPD-102-F white coating on PP plastic (rifle of Elite Speeder Bike #B3718). (17) #PPD-1615 red coating on PP plastic (cover of Elite Speeder Bike #B3718). (18) #ACD purple coating on PVC plastic (seat pad of Elite Speeder Bike #B3718). (19) #ACD red coating on PVC plastic (wings of Elite Speeder Bike #B3718). (20) #ACD-501-S black coating on PVC plastic (wings of Elite Speeder Bike #B3718). ********************************************************************************************************************************* Page 6 of 14
7 Tested Components : (21) #PG red coating on ABS plastic (torso of Stromtrooper #B3718). (22) Off white coating on ABS plastic (date code of Assault Walker #B3717). (23) White coating on PP plastic (date code of Elite Speeder Bike #B3718). (24) #AG-501-F black tampo coating on PVC plastic (armor of Stormtrooper Sergeant #B3717). (25) Green ABS plastic (foot, body of Assault Walker #B3717). (26) Dull light green PP plastic (legs of Assault Walker #B3717). (27) Dull light green POM plastic (legs joint of Assault Walker #B3717). (28) Metallic deep grey PVC plastic (rifle, handle, antenna of Assault Walker #B3717). (29) White PVC plastic (head, gun, arms, legs, belt, armor of Stormtrooper Sergeant #B3717). (30) White ABS plastic (body of Stormtrooper Sergeant #B3717). (31) Black PVC plastic (head, arms, legs, belt of Stromtrooper #B3718). (32) Metallic grey PP plastic (cover, rifle, frame of Elite Speeder Bike #B3718). (33) Metallic grey PVC plastic (wings, seat pad, engine, tube, handle of Elite Speeder Bike #B3718). (34) Black ABS plastic (cover, plate of Elite Speeder Bike, torso of Stromtrooper #B3718). (35) Metallic grey ABS plastic (chassis of Elite Speeder Bike #B3718). (36) Black POM plastic (joints of Stromtrooper #B3718). Date sample received : May 19, 2015, May 26, 2015 Testing period : May 19, 2015 to May 28, 2015 (4) Heavy Elements Analysis Test Method : Sections 8.3.2, 8.3.3, and of the ASTM Standard Consumer Safety Specification for Toy Safety F963-11, acid extraction and analysed by Inductively Coupled Argon Plasma Spectrometry. Elements Result in ppm Limit (1) (2) (3) (4) (5) (6) ppm Sol. Barium (Ba) <5 <5 <5 <5 <5 < Sol. Lead (Pb) <5 <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 < ************************************************************************************************************************************ Page 7 of 14
8 Elements Result in ppm Limit (7) (8) (9) (10) (11) (12) ppm Sol. Barium (Ba) <5 <5 <5 <5 <5 < Sol. Lead (Pb) <5 <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 < Elements Result in ppm Limit (13) (14) (15) (16) (17) (18) ppm Sol. Barium (Ba) <5 <5 <5 <5 <5 < Sol. Lead (Pb) <5 <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 < Elements Result in ppm Limit (19) (20) (21) (22) (23) (24) ppm Sol. Barium (Ba) <5 <5 <5 <5 <5 < Sol. Lead (Pb) <5 <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 < ************************************************************************************************************************************ Page 8 of 14
9 Elements Result in ppm Limit (25) (26) (27) (28) (29) (30) ppm Sol. Barium (Ba) <5 <5 <5 <5 <5 < Sol. Lead (Pb) <5 <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 < Elements Result in ppm Limit (31) (32) (33) (34) (35) (36) ppm Sol. Barium (Ba) <5 <5 <5 <5 <5 < Sol. Lead (Pb) <5 <5 <5 <5 <5 <5 90 Sol. Cadmium (Cd) <5 <5 <5 <5 <5 <5 75 Sol. Antimony (Sb) <5 <5 <5 <5 <5 <5 60 Sol. Selenium (Se) <5 <5 <5 <5 <5 <5 500 Sol. Chromium (Cr) <5 <5 <5 <5 <5 <5 60 Sol. Mercury (Hg) <5 <5 <5 <5 <5 <5 60 Sol. Arsenic (As) <2.5 <2.5 <2.5 <2.5 <2.5 < Sol. = Soluble ppm = parts per million = mg/kg ************************************************************************************************************************************ Page 9 of 14
10 Tested Components : (1) #ACD-501 black coating on PVC plastic (head, belt, armor, tube of Stormtrooper Sergeant #B3717, tube of Elite Speeder Bike #B3718). (2) #ACD silver color coating on PVC plastic (head of Stormtrooper Sergeant #B3717, head of Stromtrooper #B3718). (3) #PS-501-F black coating on ABS plastic (torso of Stormtrooper Sergeant #B3717). (4) #ACD-501-F black coating on PVC plastic (hands, arms, legs, armor of Stormtrooper Sergeant #B3717, handle, seat pad of Elite Speeder Bike #B3718). (5) #ACD-102 white coating on PVC plastic (belt, gun of Stormtrooper Sergeant #B3717). (6) #ACD-501-S black coating on PVC plastic (gun of Stormtrooper Sergeant #B3717). (7) #PG yellow tampo coating on ABS plastic (body, front, legs of Assault Walker #B3717). (8) #PG deep green tampo coating on ABS plastic (front of Assault Walker #B3717). (9) #P deep green coating on ABS plastic (front of Assault Walker #B3717). (10) #PPD-1531 green coating on PP plastic (legs of Assault Walker #B3717). (11) #P grey coating on ABS plastic (body of Elite Speeder Bike #B3718). (12) #P silvery grey coating on ABS plastic (body of Elite Speeder Bike #B3718). (13) #PG red tampo coating on ABS/PP plastic (body, cover of Elite Speeder Bike #B3718). (14) #PPD-501 black coating on PP plastic (cover of Elite Speeder Bike #B3718). (15) #PPD-1589 metallic black coating on PP plastic (rifle of Elite Speeder Bike #B3718). (16) #PPD-102-F white coating on PP plastic (rifle of Elite Speeder Bike #B3718). (17) #PPD-1615 red coating on PP plastic (cover of Elite Speeder Bike #B3718). (18) #ACD purple coating on PVC plastic (seat pad of Elite Speeder Bike #B3718). (19) #ACD red coating on PVC plastic (wings of Elite Speeder Bike #B3718). (20) #ACD-501-S black coating on PVC plastic (wings of Elite Speeder Bike #B3718). (21) #PG red coating on ABS plastic (torso of Stromtrooper #B3718). (22) Off white coating on ABS plastic (date code of Assault Walker #B3717). (23) White coating on PP plastic (date code of Elite Speeder Bike #B3718). (24) #AG-501-F black tampo coating on PVC plastic (armor of Stormtrooper Sergeant #B3717). (25) Green ABS plastic (foot, body of Assault Walker #B3717). (26) Dull light green PP plastic (legs of Assault Walker #B3717). (27) Dull light green POM plastic (legs joint of Assault Walker #B3717). (28) Metallic deep grey PVC plastic (rifle, handle, antenna of Assault Walker #B3717). (29) White PVC plastic (head, gun, arms, legs, belt, armor of Stormtrooper Sergeant #B3717). (30) White ABS plastic (body of Stormtrooper Sergeant #B3717). (31) Black PVC plastic (head, arms, legs, belt of Stromtrooper #B3718). (32) Metallic grey PP plastic (cover, rifle, frame of Elite Speeder Bike #B3718). (33) Metallic grey PVC plastic (wings, seat pad, engine, tube, handle of Elite Speeder Bike #B3718). (34) Black ABS plastic (cover, plate of Elite Speeder Bike, torso of Stromtrooper #B3718). (35) Metallic grey ABS plastic (chassis of Elite Speeder Bike #B3718). (36) Black POM plastic (joints of Stromtrooper #B3718). Date sample received : May 19, 2015, May 26, 2015 Testing period : May 19, 2015 to May 28, 2015 ************************************************************************************************************************************** Page 10 of 14
11 (5) Total Lead (Pb) Content in Surface Coating Test Method : Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings, test method CPSC-CH-E , analysed by Inductively Coupled Argon Plasma Spectrometry. Tested Component Result in ppm Limit in ppm (1) <20 90 (2) <20 90 (3) <20 90 (4) <20 90 (5) <20 90 (6) <20 90 (7) <20 90 (8) <20 90 (9) <20 90 (10) <20 90 (11) <20 90 (12) <20 90 (13) <20 90 (14) <20 90 (15) <20 90 (16) <20 90 (17) <20 90 (18) <20 90 (19) <20 90 (20) <20 90 (21) <20 90 (22) <20 90 (23) <20 90 (24) <20 90 ppm = parts per million = mg/kg ************************************************************************************************************************************ Page 11 of 14
12 Tested Components : (1) #ACD-501 black coating on PVC plastic (head, belt, armor, tube of Stormtrooper Sergeant #B3717, tube of Elite Speeder Bike #B3718). (2) #ACD silver color coating on PVC plastic (head of Stormtrooper Sergeant #B3717, head of Stromtrooper #B3718). (3) #PS-501-F black coating on ABS plastic (torso of Stormtrooper Sergeant #B3717). (4) #ACD-501-F black coating on PVC plastic (hands, arms, legs, armor of Stormtrooper Sergeant #B3717, handle, seat pad of Elite Speeder Bike #B3718). (5) #ACD-102 white coating on PVC plastic (belt, gun of Stormtrooper Sergeant #B3717). (6) #ACD-501-S black coating on PVC plastic (gun of Stormtrooper Sergeant #B3717). (7) #PG yellow tampo coating on ABS plastic (body, front, legs of Assault Walker #B3717). (8) #PG deep green tampo coating on ABS plastic (front of Assault Walker #B3717). (9) #P deep green coating on ABS plastic (front of Assault Walker #B3717). (10) #PPD-1531 green coating on PP plastic (legs of Assault Walker #B3717). (11) #P grey coating on ABS plastic (body of Elite Speeder Bike #B3718). (12) #P silvery grey coating on ABS plastic (body of Elite Speeder Bike #B3718). (13) #PG red tampo coating on ABS/PP plastic (body, cover of Elite Speeder Bike #B3718). (14) #PPD-501 black coating on PP plastic (cover of Elite Speeder Bike #B3718). (15) #PPD-1589 metallic black coating on PP plastic (rifle of Elite Speeder Bike #B3718). (16) #PPD-102-F white coating on PP plastic (rifle of Elite Speeder Bike #B3718). (17) #PPD-1615 red coating on PP plastic (cover of Elite Speeder Bike #B3718). (18) #ACD purple coating on PVC plastic (seat pad of Elite Speeder Bike #B3718). (19) #ACD red coating on PVC plastic (wings of Elite Speeder Bike #B3718). (20) #ACD-501-S black coating on PVC plastic (wings of Elite Speeder Bike #B3718). (21) #PG red coating on ABS plastic (torso of Stromtrooper #B3718). (22) Off white coating on ABS plastic (date code of Assault Walker #B3717). (23) White coating on PP plastic (date code of Elite Speeder Bike #B3718). (24) #AG-501-F black tampo coating on PVC plastic (armor of Stormtrooper Sergeant #B3717). Date sample received : May 19, 2015, May 26, 2015 Testing period : May 19, 2015 to May 28, 2015 ************************************************************************************************************************************** Page 12 of 14
13 (6) Total Lead (Pb) Content in Non-Surface Coating Materials (Substrate) Test Method : Standard Operating Procedures for Determining Total Lead (Pb) in Children s Products, test methods CPSC-CH-E and/or CPSC-CH-E , analysed by Inductively Coupled Argon Plasma Spectrometry. Tested Component Result in ppm Limit in ppm (1) < (2) < (3) < (4) < (5) < (6) < (7) < (8) < (9) < (10) < (11) < (12) < ppm = parts per million = mg/kg Tested Components : (1) Green ABS plastic (foot, body of Assault Walker #B3717). (2) Dull light green PP plastic (legs of Assault Walker #B3717). (3) Dull light green POM plastic (legs joint of Assault Walker #B3717). (4) Metallic deep grey PVC plastic (rifle, handle, antenna of Assault Walker #B3717). (5) White PVC plastic (head, gun, arms, legs, belt, armor of Stormtrooper Sergeant #B3717). (6) White ABS plastic (body of Stormtrooper Sergeant #B3717). (7) Black PVC plastic (head, arms, legs, belt of Stromtrooper #B3718). (8) Metallic grey PP plastic (cover, rifle, frame of Elite Speeder Bike #B3718). (9) Metallic grey PVC plastic (wings, seat pad, engine, tube, handle of Elite Speeder Bike #B3718). (10) Black ABS plastic (cover, plate of Elite Speeder Bike, torso of Stromtrooper #B3718). (11) Metallic grey ABS plastic (chassis of Elite Speeder Bike #B3718). (12) Black POM plastic (joints of Stromtrooper #B3718). Date sample received : May 19, 2015, Testing period : May 19, 2015 to May 22, 2015 ************************************************************************************************************************************** Page 13 of 14
14 ********************************************************************************************************************************* End of report Except where explicitly agreed in writing, all work and services performed by Intertek is subject to our standard Terms and Conditions which can be obtained at our website: Intertek's responsibility and liability are limited to the terms and conditions of the agreement. This report is made solely on the basis of your instructions and / or information and materials supplied by you and provide no warranty on the tested sample(s) be truly representative of the sample source. The report is not intended to be a recommendation for any particular course of action, you are responsible for acting as you see fit on the basis of the report results. Intertek is under no obligation to refer to or report upon any facts or circumstances which are outside the specific instructions received and accepts no responsibility to any parties whatsoever, following the issue of the report, for any matters arising outside the agreed scope of the works. This report does not discharge or release you from your legal obligations and duties to any other person. You are the only one authorized to permit copying or distribution of this report (and then only in its entirety). Any such third parties to whom this report may be circulated rely on the content of the report solely at their own risk. This report shall not be reproduced, except in full. Page 14 of 14
*HJ * Test Report H (HKGH ) Number:
Applicant: HASBRO S.A. / HASBRO INTERNATIONAL Date: May 17, 2016 TRADING B.V. RM 1308 WORLD COMMERCE CTR HARBOUR CITY 11 CANTON RD TSIM SHA TSUI KLN HK Attn: ROBIN ZHU Submitted samples said to be : Item
More informationApplicant: NEAT-OH! INTERNATIONAL, LLC Date: Dec 20, FRONTAGE ROAD SUITE 303 NORTHFIELD IL USA Attn: ELAN FELDMAN
Applicant: NEAT-OH! INTERNATIONAL, LLC Date: Dec 20, 2013 790 FRONTAGE ROAD SUITE 303 NORTHFIELD IL 60093 USA Attn: ELAN FELDMAN Sample Description: Five (5) sets of submitted sample said to be : Item
More informationTest standard: European Standard on Safety of toys EN71-1 : 2014
1 Mechanical and Physical Test Test standard: European Standard on Safety of toys EN71-1 : 2014 Clause Testing items Assessment 4 General requirements 4.1 Material P 4.2 Assembly NA 4.3 Flexible plastic
More informationPASS TEST REPORT OVERALL RESULT: At the request of the client, the following tests were conducted:
Recipient Email: roz@peerlessumbrella.com Pages: Page 1 of 6 SAMPLE INFORMATION: Description: The Winchester 48" Fashion Umbrella Assortment: - Purchase Order Number: Roz SKU/style No.: 2610SO Toy Co./Agency:
More informationSuper Cyanoacrylate Adhesive Gel 8334
Super Cyanoacrylate Adhesive Gel 8334 Super Cyanoacrylate Adhesive has been formulated to quickly bond plastics, metal, and ceramics. It offers excellent strength characteristics. Also available in display
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14460 First edition 1999-04-01 Protective clothing for automobile racing drivers Protection against heat and flame Performance requirements and test methods Vêtements de protection
More informationInk mixing Instructions:
Ink mixing Instructions: Pad printing Inks are mixed by weight not volume. (A digital scale measuring in grams is recommended.) - Open the Ink Container and mix thoroughly. - Place an appropriate container
More information3D-Beauty International Red Hill Avenue, Suite F Tustin, CA USA Tel: ** MATERIAL SAFETY DATA SHEET Finished Product**
Express Cleanser SECTION 1 SUBSTANCE & PRODUCT IDENTIFICATION TRADE NAME: Express Cleanser CODE: Cleanser; Liquid Makeup Remover FINISHED PRODUCT NAME: Express Cleanser EFFECTIVE DATE: May-2012 DESCRIPTION
More informationInk mixing Instructions:
Ink mixing Instructions: Pad printing Inks are mixed by weight not volume. (A digital scale measuring in grams is recommended.) - Open the Ink Container and mix thoroughly. - Place an appropriate container
More informationSAFETY DATA SHEET Page 1 of 5
SAFETY DATA SHEET Page 1 of 5 Date Prepared: February 1, 2017 1. Product and Company Identification Jet-Lube LLC / Deacon Bldg. #1, West Point Drive Washington, PA 15301 USA Phone (724) 225-8008 24 Hour
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 WHMIS CLASS D-2: Material causing other toxic effects. HCS Class: Irritating substance. WHMIS (Pictograms) Clear
More informationFrequently Asked Questions (FAQs) on Regulation (EU) No 1007/2011 on textile names and related labelling and marking of textile products
Table of Content Frequently Asked Questions (FAQs) on Regulation (EU) No 1007/2011 on textile names and related labelling and marking of textile products Introduction...1 1. General...2 2. Scope...2 3.
More informationBasketball Apparel Guide
LAST UPDATED 12-3-2018 Basketball Apparel Guide For all instances when a player s apparel does not conform to the restrictions/requirements outlined in the rules and guide, the player shall not be allowed
More informationMaterial Safety Data Sheet
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 191.12 D-2B HCS Class: Irritating substance. WHMIS (Pictograms) Deep Blue Concentrate (1:3) Dilution Concentrated Glass Cleaner
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 WHMIS CLASS D-2: Material causing other toxic effects. HCS Class: Irritating substance. WHMIS (Pictograms) Push
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 191.12 WHMIS CLASS D-2: Material causing other toxic effects. HCS CLASS: Irritating substance. WHMIS (Pictograms) Deep Blue
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 Not controlled under WHMIS (Canada). HCS Class: Irritating substance. WHMIS (Pictograms) Betco Lemon Neutral ph
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
WHMIS (Pictograms) Fiber Pro POG Paint, Oil, and Grease Remover N/A WHMIS CLASS D-: Material causing other toxic effects. WHMIS CLASS B-3: Combustible liquid with a flash point between 37.8 C (100 F) and
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 191.12 Not controlled under WHMIS (Canada). Not controlled under the HCS (United States). WHMIS (Pictograms) Best Scent New
More informationIssuing Date January 5, 2015 Revision Date New Revision Number 0 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
SAFETY DATA SHEET Issuing Date January 5, 2015 Revision Number 0 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product identifier Product Name Glad Trash Bags Other means
More informationMaterial Safety Data Sheet Oxalic Acid - 10% Solution MSDS
Material Safety Data Sheet Oxalic Acid - 10% Solution MSDS Section 1: Chemical Product and Company Identification Product Name: Oxalic Acid - 10% Solution Catalog Codes: SLO1021 CAS#: Mixture. RTECS: Not
More informationSAFTETY DATA SHEET WINSOR & NEWTON ARTISAN WATER MIXABLE OIL
REVISION DATE: 17/03/11 SAFTETY DATA SHEET WINSOR & NEWTON ARTISAN WATER MIXABLE OIL COLOURS (CADMIUM COLOURS) 1 IDENTIFICATON OF THE SUBSTANCE/ PREPARATION AND COMPANY UNDERTAKING PRODUCT NAME APPLICATION
More informationTestalks. Textile Testing International. March April Your partner in textile Testing. Textile Testing International s Online Newsletter
www.ttilabs.net Testalks March April 2012 March-April Issue 2011 Textile Testing International Your partner in textile Testing Table of Contents Section I Testing & Inspections Restricted Chemicals Testing
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 Not a WHMIS controlled material. Controlled under the Pest Control Products Act (PCP) HCS Class: Irritating substance.
More informationMaterial Safety Data Sheet
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 90.200 WHMIS Class D-2B: Material causing other toxic effects (TOXIC). HCS Class: Irritating substance. WHMIS (Pictograms)
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 Not controlled under WHMIS (Canada). HCS Class: Irritating substance. WHMIS (Pictograms) AF315 Neutral ph Disinfectant/Deodorant/Detergent
More informationMaterial Safety Data Sheet
WHMIS (Pictograms) Fiber Pro POG Paint, Oil, and Grease Remover N/A WHMIS CLASS D-2: Material causing other toxic effects. WHMIS CLASS B-3: Combustible liquid with a flash point between 37.8 C (1 F) and
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 Not controlled under WHMIS (Canada). HCS Class: Irritating substance. WHMIS (Pictograms) Hybrid Floor Finish Not
More informationPage 1 of 7. Hand-Held High Frequency C9220T
Page 1 of 7 Hand-Held High Frequency C9220T Universal Companies, Inc. 2005 All rights reserved for copyright purposes. No reproductions by print or photocopies are allowed without written permission. Page
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 WHMIS (Pictograms) Sanigel Instant Hand Sanitizer CLASS B-2: Flammable liquid with a flash point lower than 7.8
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 191.12 WHMIS CLASS E: Corrosive liquid. HCS CLASS: Corrosive liquid. WHMIS (Pictograms) Tile Clean Deep Cleansing Hard Tile
More informationFurness Railway Wagon Co.
Furness Railway Wagon Co. Furness Railway/LMS/BR 25ton All Steel Bogie Bolster/Rail Wagon Wheels, paint and transfers required to complete. Please note that to aid the folding of the various parts score
More informationMATERIAL SAFETY DATA SHEET
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: G96 GUN and REEL CLOTH, GUN MITT PRODUCT CODES: G96 Part Numbers: #1093, #1083 MANUFACTURER: G96 Products Inc. ADDRESS: 85 5 th Ave, Bldg #6
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET EPOXICONAZOLE TC 1. Product & Manufacturer information Product Name: EPOXICONAZOLE TECH Manufacturer: Shanghai Tenglong Agrochem Co., Ltd. Phone Numbers: Tel: 86-21 5506 3225
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
WHMIS (Pictograms) CitruSolv HF Natural Degreaser Deodorizer - High Flash CLASS B-3: Combustible liquid with a flash point between 37.8 C (100 F) and 93.3 C (00 F). WHMIS Class D-B: Material causing other
More informationMaterial Safety Data Sheet
0 3 0 Material Safety Data Sheet Trichloroacetic Acid Solution, 10% MSDS He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 3 0 0 Section 1: Chemical Product and Company Identification Product
More informationMaterial Safety Data Sheet
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 191.12 Not controlled under WHMIS (Canada). HCS Class: Irritating substance. WHMIS (Pictograms) Best Scent Ocean Breeze (At
More informationSafety Data Sheet. Company: Ricca Chemical Company. 448 West Fork Drive Arlington, TX USA
SECTION 1: Identification 1.1. Product Identifier Trade Name or Designation: Barium Chloride, 25% (w/v) Product Number: 860 Other Identifying Product Numbers: 860-1, 860-16, 860-32, 860-4, 860-8 1.2. Recommended
More informationMaterial Safety Data Sheet
Material Safety Data Sheet WHMIS (Pictograms) CLASS A: Compressed gas. CLASS B-5: Flammable aerosol. WHMIS (Classification) HCS Class: Irritating substance. Section 1. Chemical Product and Company Identification
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 191.12 WHMIS CLASS D-2: Material causing other toxic effects. HCS Class: Irritating substance. WHMIS (Pictograms) Green Earth
More informationSAFETY DATA SHEET Page 1 of 5
SAFETY DATA SHEET Page 1 of 5 1. Product and Company Identification Jet-Lube LLC / Deacon Bldg. #1, West Point Drive Washington, PA 15301 USA Phone (724) 225-8008 24 Hour Emergency Response Contact: CHEMTREC
More informationSAFETY DATA SHEET Page 1 of 5
SAFETY DATA SHEET Page 1 of 5 Date Prepared: February 1, 2017 1. Product and Company Identification Jet-Lube LLC / Deacon Bldg. #1, West Point Drive Washington, PA 15301 USA Phone (724) 225-8008 24 Hour
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 WHMIS (Pictograms) Winning Hands Hand Sanitizer Instant Hand Sanitizer CLASS B-2: Flammable liquid with a flash
More informationMATERIAL SAFETY DATA SHEET
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: G96 GUN OIL PRODUCT CODES: G96 Part Numbers: #1054 MANUFACTURER: G96 Products Inc. ADDRESS: 85 5 th Ave, Bldg #6 Paterson, NJ 07524 USA Website:
More informationMATERIAL SAFETY DATA SHEET MXBON
CARTELL CHEMICAL CO., LTD NO.8 CHUNG JENG ROAD, MIN-SHYONG INDUSTRIAL PARK, CHIA-YIH HSIEN TEL:886-5-220-3715 FAX:886-5-220-3720 E-MAIL cartell@ms12.hinet.net MATERIAL SAFETY DATA SHEET MXBON TB 909 1.
More informationMSDS (Material Safety Data Sheet)
MSDS (Material Safety Data Sheet) SECTION #1 PRODUCT AND COMPANY IDENTIFICATION TRADE NAME: POWER STEERING FLUID (FLUIDE SERVO DIRECTION) CHEMICAL NAME AND SYNONYMS: MIXTURE MANUFACTURER/SUPPLIER S NAME:
More informationSAFETY DATA SHEET SUPERIOR NO. 312-PVA DATE REVISED: January 1, 2017
SAFETY DATA SHEET SUPERIOR NO. 312-PVA DATE REVISED: January 1, 2017 Product Name: Superior No. Superior 312-PVA Manufacturer: Superior Flux & Mfg. Co. 6615 Parkland Blvd. Cleveland, OH 44139 Emergency
More information!!! CCS LAVENDER SPIKE OIL ESSENCE!!!!!! ! SAFETY DATA SHEET (SDS)! Page 1 of 5. MSDS for # CLSCL STDIO OILS MED
Page 1 of 5 SAFETY DATA SHEET (SDS) CCS LAVENDER SPIKE OIL ESSENCE Identification Name: CCS LAVENDER SPIKE OIL ESSENCE Relevant identified uses of the substance Use of the substance/mixture: For oil painting
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... Extreme Shine PRODUCT TYPE:... Solvent Based Tire Dressing PRODUCT NUMBER:... E1020XXX (Last 3 characters vary with the packaging) CONTROL NUMBER:... E1020XXX
More informationClips & fittings Bead chain necklaces and cord lanyards mm width breakaway lanyards mm width breakaway lanyards...
ID accessories Contents Items Page Clips & fittings... 3 Bead chain necklaces and cord lanyards... 4 10mm width breakaway lanyards... 5 15mm width breakaway lanyards... 6-7 Yo-yo badge reels... 8-9 Badge
More informationCARMEL GROUP INC. MATERIAL SAFETY DATA SHEET
Revision Date : November 27, 2012 Material Safety Data Sheet Product Name Tailor Pencil CARMEL GROUP INC. MATERIAL SAFETY DATA SHEET Section 1 PRODUCT AND COMPANY IDENTIFICATION Product Code LP10202 to
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 Product and Company Identification Product name MSDS name Product name(s) covered CAS # Generic description Manufacturer 24 hour emergency assistance D-815 Carpet Adhesive
More informationSAFETY DATA SHEET. Page 1 of 5
SAFETY DATA SHEET ChemWorks Green Super Duty Degreaser 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: ChemWorks Green Super Duty Degreaser GENERAL USE: Cleaner/degreaser for heavy industrial soils.
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 WHMIS CLASS B-5: Flammable aerosol. WHMIS CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC).
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... Antifreeze Carpet Shampoo PRODUCT TYPE:... Neutral Liquid Cleaning Compound PRODUCT NUMBER:... A0069XXX (Last 3 characters vary with the packaging) CONTROL NUMBER:...
More informationSolvent Based Pad Printing Ink Range, 1- and (alternatively) 2-Component
Product Data Sheet Pad Printing Ink TP 300 Solvent Based Pad Printing Ink Range, 1- and (alternatively) 2-Component APPLICATION Pad printing ink range TP 300 is appropriate for a vast variety of applications.
More informationEMERGENCY INFORMATION: (24-HOUR MEDICAL EMERGENCY) (GENERAL INFORMATION)
MATERIAL SAFETY DATA SHEET Rating Scale: HMIS NFPA DYNAMIC RESEARCH CO., INC. 0=Insignificant 1 HEALTH 1 4800 SW MEADOWS Ste 300 1=Slight 0 FLAMMABILITY 0 LAKE OSWEGO, OR 97035 2=Moderate 0 REACTIVE 0
More informationEvoMEDICO INTERIOR MATT
TDS0049 Established: 20 Mar 2013 Updated: 04 Jul 2017 TECHNICAL DATA SHEET FOR EvoMEDICO INTERIOR MATT DESCRIPTION An environmentally friendly, anti-bacteria coating for interior use which is washable,
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 Not controlled under WHMIS (Canada). HCS CLASS: Irritating substance. WHMIS (Pictograms) Floor Sealer Metal Interlocked
More informationSAFETY DATA SHEET SRA Soldering Products DATE REVISED: January 1, 2015
SAFETY DATA SHEET SRA Soldering Products DATE REVISED: January 1, 2015 Product Name: SRA No Clean Flux #312 Manufacturer: SRA Soldering Products, 24 Walpole Park S. STE 10, Walpole, MA 02081 Emergency
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... Kleen Track NC PRODUCT TYPE:... Acidic Liquid Cleaning Compound PRODUCT NUMBER:... K1520XXX (Last 3 characters vary with the packaging) CONTROL NUMBER:... K1520XXX
More informationSAFETY DATA SHEET. Double Play Extract Shampoo. DISTRIBUTOR 24 HR. EMERGENCY TELEPHONE NUMBERS Simplex Products
1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Double Play Extract Shampoo GENERAL USE: Pre-spray or extraction cleaning of carpets PRODUCT DESCRIPTION: Prespray & Extraction Cleaner CHEMICAL FAMILY:
More informationDRAFT EAST AFRICAN STANDARD
DEAS 346: 2012 ICS 71.100.70 HS 3302 DRAFT EAST AFRICAN STANDARD Labelling of cosmetics General requirements EAST AFRICAN COMMUNITY EAS 2012 First Edition 2012 DEAS 346: 2012 Copyright notice This EAC
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 WHMIS CLASS D-2: Material causing other toxic effects. HCS Class: Irritating substance. HCS Class: Toxic. WHMIS
More informationDUPONT TYVEK ISOCLEAN GARMENTS FOR ISO 4/5 (CLASS 10/100) AND ISO 7/8 (CLASS 10,000/100,000) CONTROLLED ENVIRONMENTS
P. 800.616.5319 E. Sales@CleanroomConnection.com DUPONT TYVEK ISOCLEAN GARMENTS FOR ISO 4/5 (CLASS 10/100) AND ISO 7/8 (CLASS 10,000/100,000) CONTROLLED ENVIRONMENTS One of the most popular products in
More informationSafety Data Sheet. ProNatural Antimicrobial Multi-Surface Cleaner SECTION 1. IDENTIFICATION
Safety Data Sheet ProNatural Antimicrobial Multi-Surface Cleaner SECTION 1. IDENTIFICATION Product Name: ProNatural Antimicrobial Multi-Surface Cleaner Synonyms: None CAS Number: Not applicable Product
More informationKAFE-F Safety Data Sheet According to Federal Register/Vol. 77, No. 58/Monday, March 26, 2012/Rules and Regulations
Safety Data Sheet According to Federal Register/Vol. 77, No. 58/Monday, March 26, 2012/Rules and Regulations SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND COMPANY 1.1 PRODUCT IDENTIFIERS Product
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... #3 Glass & Multi-Surface Cleaner PRODUCT TYPE:... Neutral Liquid Cleaning Compound PRODUCT NUMBER:... S3950XXX (Last 3 characters vary with the packaging) CONTROL
More informationQuality Assurance & Control Systems Cosmetics Testing Laboratory
Quality Assurance & Control Systems Cosmetics Testing Laboratory QACS Services Complete range of micro physicochemical tests Challenge Test The challenge test laboratory Safety Assessment (PIF) Patch Test-HRIPT
More informationSafety Data Sheet Macadamia Professional TM Nourishing Moisture Oil Treatment SECTION 1- IDENTIFICATION
5850 Granite Parkway, Suite 370. Plano, TX. 75024 Phone: 800.807.3950 Web: www.macadamiahair.com Safety Data Sheet SECTION 1- IDENTIFICATION Product Identifier: Product Form: CAS Number: INCI Name: Intended
More informationSafety Data Sheet. Classified According to OSHA Hazard Communication Standard (HCS) Company: Ricca Chemical Company
SECTION 1: Identification Classified According to OSHA Hazard Communication Standard (HCS) 1.1. Product Identifier Trade Name or Designation: Barium Chloride, 25% (w/v) Product Number: 860 Other Identifying
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 Not controlled under WHMIS (Canada). Not controlled under the HCS (United States). WHMIS (Pictograms) Clario Antibacterial
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS 875 Second Edition 2018-mm-dd Lipstick Specification Reference number DUS 875: 2018 UNBS 2018 Compliance with this standard does not, of itself confer immunity from legal obligations
More informationSAFETY DATA SHEET Revision #3
1. SUBSTANCE AND SUPPLIER IDENTIFICATION PRODUCT NAME: Certainty Foaming Alcohol Hand Sanitizer NPN: 80066462 MANUFACTURED FOR: Innocore Sales & Marketing Inc. ADDRESS: 1050 Salk Road, Unit 5, Pickering,
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET I. CHEMICAL PRODUCT & COMPANY INDENTIFICATION PRODUCT NAME: Bac-Shield PRODUCT TYPE: Antimicrobial EPA Reg # 81446-1 CHEMICAL NAME: Aqueous solution of poly n-acetylglucosamine
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... RX2 Wheel & Rim Cleaner PRODUCT TYPE:... Alkaline liquid cleaning compound PRODUCT NUMBER:... RX2000XXX (Last 3 characters vary with the packaging) CONTROL NUMBER:...
More informationNever-Seez Regular Grade SAFETY DATA SHEET. Identification
SDS036 Never-Seez Regular Grade SAFETY DATA SHEET Identification LABEL IDENTIFIER: PRODUCT IDENTIFIER: Never-Seez Regular Grade P/N 29527 - Never-Seez Regular Grade COMPANY IDENTIFICATION: MSA Safety Incorporated
More informationSAFETY DATA SHEET. SSS Bella Pearlescent Lotion Hand Soap. DISTRIBUTOR 24 HR. EMERGENCY TELEPHONE NUMBERS Triple S
SAFETY DATA SHEET SSS Bella Pearlescent Lotion Hand Soap Date Prepared : 05/14/2015 SDS No : Triple S_Bella Date Revised : 01/20/2016 Revision No : 2 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME:
More informationConception et Fabrication de Produits Médicaux et Paramédicaux
aa Conception et Fabrication de Produits Médicaux et Paramédicaux aasafety Data Sheet According to Regulation (EC) No. 1907/2006 (amended by Regulation (EU) No. 2015/830) Version: 1 Version date: 13/12/2016
More information(No Model.) 2 Sheets-Sheet 1. F. C. RUFFHEAD & E. J. SCHEER. ADJUSTABLE BICYCLE PARASOL AND SUPPORT, No. 555,025, Patented Feb. 18, A.
(No Model.) 2 Sheets-Sheet 1. F. C. RUFFHEAD & E. J. SCHEER. ADJUSTABLE BICYCLE PARASOL AND SUPPORT, No. 555,025, Patented Feb. 18, 1896. 52 A. (No Model.) 2 sheets-sheet 2. F. C. RUFFHEAD & E. J. SCHEER,
More informationSAFETY DATA SHEET. Pearlescent Lotion Hand Soap
1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Pearlescent Lotion Hand Soap GENERAL USE: Hand cleaner PRODUCT DESCRIPTION: Pearlescent lotion hand soap CHEMICAL FAMILY: Detergent Blend SAFETY DATA
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... Mega Foam PRODUCT TYPE:... Neutral Liquid Cleaning Compound PRODUCT NUMBER:... M2315XXX (Last 3 characters vary with the packaging) CONTROL NUMBER:... M2315XXX
More informationSAFETY DATA SHEET ProTecta Spray Lubricant
SAFETY DATA SHEET ProTecta Spray Lubricant EMERGENCY TELEPHONE NUMBER: HMC (Hazardous Material Compliance Corp.) (Info-Trac): 1-800-535-5053 * 352-323-3500. Telephone Number for Information: 406-287-7836
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... Windshield Washer Anti-Freeze PRODUCT TYPE:... Solvent Based Cleaning Compound PRODUCT NUMBER:... W4240XXX (Last 3 characters vary with the packaging) CONTROL
More informationKM-S824 Modern Salon Spa Pedicure Chair Plumbing Free
KM-S824 Modern Salon Spa Pedicure Chair Plumbing Free NOTE: There is a wiring harness (see arrow) that needs to be connected from under the seat cushion to the back of the Chair Back. Keller International
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... Bug Gel PRODUCT TYPE:... Alkaline liquid cleaning compound PRODUCT NUMBER:... B0490XXX (Last 3 characters vary with the packaging) CONTROL NUMBER:... B0490XXX
More informationRegion: AUSTRALASIA Laboratory: Household & Toiletries Authorisation Status: Authorised, issued on
R&C Products Pty Ltd. 33 Hope Street, Ermington NSW 2115 AUSTRALIA Product Safety Data Sheet Finished Product Region: AUSTRALASIA Laboratory: Household & Toiletries Authorisation Status: Authorised, issued
More informationSTRING LINES. If the frame is not fitted straight plumb and level the doors will not function correctly.
STRING LINES To ease installation of this frame it has been fitted with string lines. If the frame is not fitted straight plumb and level the doors will not function correctly. To ensure the top and bottom
More informationGlo Germ Company. PO Box 189. Moab, Utah Safety Data Sheet (SDS) Revised July 3, 2018 Section 1: Identification
Glo Germ Company PO Box 189 Moab, Utah 84532 Safety Data Sheet (SDS) Revised July 3, 2018 Section 1: Identification GLO GERM LOTION BASE (GEL) AND SURFACE CLEANING DETECTION GEL Emergency & Information
More information[Date of order] [Date of delivery] [Date]
CTL GmbH ChemicalTechnological Laboratory Krackser Straße 12 33659 Germany Killer Ink Limited Mr Safar Units 24 Parliament Business Centre Commerce Way, Liverpool, L8 7BA UNITED KINGDOM Marion Heyde [fon]
More informationMATERIAL SAFETY DATA SHEET MSDS #: PGMSDS BC-07 Issue Date: 29 Nov 2006
Page 1 of 5 The Procter & Gamble Company Baby Care GBU Baby and Toddler Personal Care Winton Hill Business Center 6280 Center Hill Avenue Cincinnati, OH 45224 MATERIAL SAFETY DATA SHEET MSDS #: PGMSDS
More informationSafety Data Sheet 1 PRODUCT IDENTIFICATION
1 PRODUCT IDENTIFICATION PRODUCT NAME:... Breakthru Pine-All Cleaner Deodorizer PRODUCT TYPE:... Neutral liquid cleaning/deodorizing compound PRODUCT NUMBER:... BT015XXX (Last 3 characters vary with the
More informationMATERIAL SAFETY DATA SHEET
pg. 1 MATERIAL SAFETY DATA SHEET PRODUCT & COMPANY INFORMATION PRODUCT CODE: PRODUCT NAME: COMPANY NAME: ADDRESS: #071-B2008 AND #071A-B10012 MUSCA DOMESTICA LURE / ADVANTAGE FLY BANQUET J.F.OAKES SALES
More informationSafety Data Sheet. SECTION 1: Identification of the substance/mixture and of the company/undertaking
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Product name Product number CFDP8 1.3 Details of the supplier of the safety data sheet Name Address
More informationMaterial Safety Data Sheet
0 3 0 Material Safety Data Sheet Cadmium sulfate, anhydrous MSDS Section 1: Chemical Product and Company Identification He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 3 0 0 E Product Name:
More informationProduct Name: SCOTTS SCREEN WASH Creation Date: 10/10/12 CONCENTRATE Replaces: 21/07/11
Product Name: SCOTTS SCREEN WASH Creation Date: 10/10/12 CONCENTRATE Replaces: 21/07/11 SECTION 1: Identification of the substance/mixture and of the company undertaking 1.1. Product Identifier SCOTTS
More informationMaterial Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR
Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR 1910.1200 CLASS B-2: Flammable liquid with a flash point lower than 7.8 C (100 F). Class: Flammable liquid having a flash
More informationWritten Program. for. Hazard Communication
Written Program for Hazard Communication 1910.1200 Hazard Communication The following hazard communication program is provided as a guide to assist employers and employees in complying with the requirements
More informationMaterial Safety Data Sheet
Section 1: Product and Company Identification Product Name Catalog Number Company Cyclic GMP CLIA Kit (High-Sensitivity) SKT-210 StressMarq Biosciences Inc. PO Box 55036 Cadboro Bay Victoria BC V8N4G0
More informationTECHNICAL SPECIFICATIONS
#1130 Super Sassafras Cleaner / Maintainer DESCRIPTION An all-purpose neutral cleaner/maintainer with superior cleaning power for use on any surface not effected by water. Ideal for use on sealed wood
More information