Product Information Emulsifiers & Surfactants: dermofeel easymuls plus Product features: - O/W-emulsifier for low viscous emulsions - Cold or hot processable - Film forming and caring skin feel - Sunflower based - 100% naturally derived
The product: dermofeel easymuls plus The second generation of a powerful O/W-emulsifier for low viscous and sprayable concepts. It is an economic solution as it can be applied in an energy saving cold temperature process and is used in low dosage. dermofeel easymuls plus is a single ingredient raw material that can be used without any co-emulsifier. Based on sunflower oil, it is suitable for palm oil free and vegan formulations. Characteristics - INCI: Glyceryl Oleate Citrate - Appearance: yellowish viscous liquid - 100% naturally derived; already ECOCERT/COSMOS approved (please contact us for further information) - Made from fatty acids from sunflower oil in food ingredient quality - Emulsifier for low viscous concepts, cold processable - Builds a perceptible film and provides a caring skin feel - Suitable for several manufacturing procedures (cold, hot-cold, hot-hot) - No co-emulsifier needed - Combination with gelling agents and buffer system recommended - Sprayable suncare, body sprays, face serums or deodorant roll-ons etc. - Suitable as co-emulsifier for improving skin feel or stabilizing O/W-emulsions without increasing the viscosity - For oil phases from 5 to 25 % - ph range: 4.5 7.0 - HLB 10 15 Dosage Product Concept O/W-emulsion as main emulsifier Dosage 1.0 4.0 % (18% in relation to oil phase) O/W-emulsion as co-emulsifier 0.5 1.0 %
How to work with dermofeel easymuls plus Manufacturing procedure (laboratory scale) For cold process, hot-cold process or hot-hot process 1. Disperse dermofeel easymuls plus in hot or cold oil phase. 2. Emulsify by adding the oil phase to the hot or cold water phase. 3. Homogenize pre-emulsion thoroughly to obtain good stability and viscosity. dermofeel easymuls plus is prone to ph drift down to ~ ph 3.5. It is recommended to use 0.15 % tri-sodium-citrate as a buffer system. Easy-to-use and versatile in production temperature! Formulation advice Mandatory stabilization of emulsions with Tested compatibility Instabilities may occur with * * Reduce above mentioned instabilities Incompatibility Ideal oil phase size and composition For oil phases of 5-15 % additional stabilization may be necessary with Obtain cream texture Adjust sensorial properties in cold process in hot process Natural gelling agent (e.g. 0.5 % Xanthan Gum) or synthetic thickener (acrylates, carbomer types) Common conventional or alternative preservation systems Preservation systems based on surface active materials (dosage up to 0.5 %) UV-filters and pigments Higher amounts of electrolytes (Sodium cloride, Sodium lactate) Ethanol (> 5 %) Surfactants Replace 50% of the used dermofeel easymuls plus with dermofeel G 5 L Cationic substances Aluminium chlorohydrate Zinc PCA 15 25 %, all kinds of oils and emollients Additional dosage of gelling agents Additional combination of gelling agents (recommended: starch polymers, acrylates) Fatty alcohols, consistency agents or waxes Additional dosage of gelling agents Add dermofeel viscolid at 3-5 % Choice of oil phase components Actives Application Ideas Perfectly suitable for all kinds of low viscous and sprayable emulsions. For more formulation ideas visit us at: http://www.dr-straetmans.de/en/products/
Proof of Performance Increase in viscosity depending on the size of the oil phase 20000 17500 15000 Viscosity [mpas] 12500 10000 7500 5000 2500 5 10 15 20 25 30 Oil concentration [%] 17,5 % dermofeel easymuls plus related to the oil phase dermofeel easymuls plus can be incorporated without a significant increase of viscosity. Trade Information International Approval* Packaging EU, USA, Canada, Australia, China, Japan, Korea. 25 kg Shelf life (stored in original container) 12 months * Information is based on our best knowledge and reviewed for the most requested regions only. We recommend to check current regulatory requirements in individual target countries. For more information contact our regulatory department or refer to our regulatory status statement. For further information, contact our Dr. Straetmans sales team: sales@dr-straetmans.de or your local representative. Dermofeel_easymuls plus_2016-v04
Dr. Straetmans Worldwide Network http://www.dr-straetmans.de/en/meta/contact/ Disclaimer: The information above is believed to be accurate and represents the best information currently available to us. Dr. Straetmans makes no warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own determination on the suitability of the information for their particular purposes. In no way shall Dr. Straetmans be liable for any claims, losses, damages, lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising from the sale or use of this material. Dr. Straetmans GmbH Merkurring 90 D-22143 Hamburg Phone: +49 (0)40-669 356-0 Fax: +49 (0)40-669 356-310 email: info@dr-straetmans.de