TM TM LITEBOX 2x4 FRAME ASSEMBLY INSTRUCTIONS FOR LITEBOX TM 2X4, DEEP AND LITEBOX TM 2X4, 6 DEEP CINEMA/TELEVISION LED LIGHTING FRAME SYSTEM
LITEBOX 2x4 TM LITEBOX TM 2X4, 6 DEEP ASSEMBLY INSTRUCTIONS for LTA-LITEBOX-2X4-BOX6 PLEASE READ INSTRUCTIONS BEFORE ASSEMBLY
COMPONENT LIST 280-77 - White decal (4 required) 280-78 - Yellow decal (4 required) 280-7 - 06 decal (4 required) 280-9 - 24 decal (4 required) 280-0 - 48 decal (4 required) 280-77(Qty 4) with Yellow Decal 280-78 (Qty 4) with 06 Decal 280-7 (Qty 4) with 24 Decal 280-9 (Qty 4) with 48 Decal 280-0 (Qty 4)
OPERATING LITEBOX FITTINGS Align pin to hole and slide fitting into tube. 3 2 2 Depress pin. 3 Push in fitting until pin snaps in place. 4 4 Fitting fully installed. REPLACING SNAP PINS 3 2 Squeeze clip. 3 Clip fully installed. 2 Insert clip.
ASSEMBLY - STEP (2x) 280-9 - 24 decal (2 required) 280-77 - White decal (4 required) with 24 decal ASSEMBLY - STEP 2 (2x) 280-9 - 24 decal (2 required) 280-78 - Yellow decal (4 required) with Yellow decal with 24 decal with Yellow decal
ASSEMBLY - STEP 3 (2x) Assembly from Step (2 required) 280-7 - 06 decal (4 required) with 06 decal with 06 decal IMPORTANT Note orientation of Both 280-7 s with 06 Decal ASSEMBLY - STEP 4 (2x) Assembly from Step 2 (2 required) Assembly from Step 3 (2 required) with Yellow Decal with Yellow Decal
Note: Rivet Heads face inward. ASSEMBLY - STEP 5 Assembly from Step 4 ( required) 280-0 - 48 decal (4 required) White Velcro with 24 decal with 24 decal Black Velcro Black Velcro
Note: Rivet Heads face inward. ASSEMBLY - STEP 6 Assembly from Step 4 ( required) Assembly from Step 5 ( required) White Velcro
ASSEMBLY - COMPLETE Note: Rivet Heads face inward. White Velcro TM
LITEBOX 2x4 TM LITEBOX TM 2X4, DEEP ASSEMBLY INSTRUCTIONS for LTA-LITEBOX-2X4-BOX PLEASE READ INSTRUCTIONS BEFORE ASSEMBLY
COMPONENT LIST 280-79 - White decal (4 required) 280-9 - 24 decal (2 required) 280-0 - 48 decal (2 required) 280-79 (Qty 4) with 24 Decal 280-9 (Qty 2) with 48 Decal 280-0 (Qty 2)
OPERATING LITEBOX FITTINGS Align pin to hole and slide fitting into tube. 3 2 2 Depress pin. 3 Push in fitting until pin snaps in place. 4 4 Fitting fully installed. REPLACING SNAP PINS 3 2 2 Squeeze clip. Insert clip. 3 Clip fully installed.
ASSEMBLY - STEP 280-9 - 24 decal ( required) 280-79 - White decal (2 required) with 24 decal ASSEMBLY - STEP 2 280-9 - 24 decal ( required) 280-79 - White decal (2 required) with 24 decal
ASSEMBLY - STEP 3 with 48 decal Assembly from Step 280-0 - 48 decal (2 required) with 48 decal ASSEMBLY - STEP 4 Assembly from Step 2 Assembly from Step 3
ASSEMBLY - COMPLETE Note: Rivet Heads face inward.
TM LITEGEAR, INC. Tel: + 88 358-8542 Email: support@litegear.com Web: litegear.com 207 LITEGEAR, INC. All rights reserved. LiteRibbon and FauxFlo are registered trademarks of LiteGear, Inc. 207 LITEGEAR, INC. All rights reserved. LiteGear, LiteMat, LiteDimmer, LiteStix, E-Control, Hybrid, Chroma, Chroma-Correct, LiteTile, LiteBox, LiteCloth, CineHue, CineMitter, Cine Chroma, Cine Series, Studio Series, Cine Hybrid, Studio Hybrid, FauxRes, LiteEngine, LiteNet, LitePower, LiteTenna, QuickLinx, TrueHybrid, Vibrant Colors, Beautifully Saturated, SkyMat, Stardust, and MapLite are trademarks of LiteGear, Inc. VELCRO is a registered trademark of Velcro BVBA 280-900