PERSONAL PROTECTION. Protection Markings Chart

PERSONAL PROTECTION Eye & Face Protection The wearing of eye and face protection in hazardous areas is a requirement under regulation 4 of the Personal Protective Equipment at Work Regulations 1992. This regulation requires employers to provide suitable personal protective equipment to employees exposed to health and safety risks. European Standards state that safety eyewear must be approved to BS (replaces BS2092). eyewear must be marked to identify the protection offered, see chart below. It must offer eye protection from impact hazards caused by fast moving particles, from operations such as chipping, grinding and cutting, and from accidental airborne hazards such as a grinding wheel failing or snapping a cutting tool. The potential impact speed must be assessed before selecting the standard protection. If the hazard could dislodge safety glasses then goggles or a face shield should be selected. When chemical splash is a consideration unvented goggles must be selected to give full eye enclosure protection. BS Protection Markings Chart Optical Class: Refractive tolerance +0.06 dio...1 Refractive tolerance +0.12 dio...2 Refractive tolerance +0.12/-0.25 dio...3 Mechanical Strength: Minimum Robustness Increased robustness (velocity <12 m/s)...s Low-energy impact (velocity <45m/sec)...F... F Medium-energy impact (velocity <120m/sec)...B...B High-energy impact (velocity <190m/sec)...A...A Field of use: Basic Droplets and Splash of Liquids (chemical)...3 Large dust particles (dust)...4 Gas and fine dust particles (gas)...5 Short circuit electric arc...8 Molten metals and hot solids...9...9 Optional extras Resistance to misting...n Resistance to surface damage (anti-scratch)... K Marking: Code : Indicates the type of filter 2 and 3 = UV 4 = IR 5 and 6 = solar). Shade number: Indicates the shade of the lens (between 1.2 and 7 for spectacles and goggles). Identification of the manufacture: (D = Pulsafe). Ophthalmic Prescription Glasses A full ophthalmic prescription service is available for safety spectacles. Obtain a prescription form from your local distributor. Fill in part 1. This may need to be completed by your company safety officer. Take the form to your optician who will carry out a vision test. Your optician will then return the completed prescription form back to us. Your spectacles will be manufactured, usually within 14 days and sent to your optician for fitting. The dispensing fee can be settled separately or included into the invoice from your local distributor. The final invoice will be sent to your company, it will include the frame, lenses and, if applicable, dispensing fee, it will not include the test or any accessories - these are payable directly to the optician. Page 1886

Quick Reference Through the eye and face protection range, there are a number of quick reference logos to help you choose which level of safety is right for you. Below are the logos and their meanings. Adjustable frames for a superior fit. Polycarbonate lenses are more impact-resistant and lighter than most types of lens. Wrap around single lens provides unobstructed field of vision. Resistant to flames and heat - not flame-proof. Designed to minimise dust contamination. Stellar safety glasses stylish metal frame safety spectacle offers the comfort of quality prescription eyewear. Includes an adjustable, breakaway flexicord retainer for added security and convenience. Has a lower impact energy rating and is more flexible compared to polycarbonate. This provides increased safety, while retaining excellent visibility. Gives a level of protection against harmful UV rays. Voyager Two piece clear polycarbonate lenses with anti-mist treatment. Built-in brow guard and side shields with integral nose bridge. Low energy impact protection with total UV protection. Class 1. Extended brow guard moulded into the top of the lens gives a near perfect orbital seal against debris. For greater protection from debris towards the side of the eyes. Glasses which have a larger lens to cover the cheek bone. Resistant to chemical splashes - not chemical proof. Hard coated for excellent durability and scratch resistance resulting in unobstructed viewing. PERSONAL PROTECTION (1)F PUL- Clear Black -1241F 7.75 6.98 Scratch Resistant Junior Spirit Lightweight stylish eyeshield featuring a strong abrasion resistant polycarbonate wraparound lens. Adjustable sidearm length for optimum fit and comfort. Available with clear lenses. CE approved to EN 166 F. SSF- Clear Black -8200K 4.07 3.26 Glasses Virtua Polycarbonate lens with a hardium casing to provide extreme protection from abrasion. 100% protection against UV radiation and impact. Contoured wrap-around lens shape for maximum eye coverage. 10D base curve lens for superior field of vision. Approved to EN 166:2001. JSP- Clear Black -1080H 2.85 2.28 Anti-Scratch/ The revolutionary super OTG features hingeless side pieces made of Grilamid that combine the benefits of temple glasses with the comfort of a headband. The flexible side arm concept means the spectacles can be adapted and worn either together with prescription spectacles or not. NEW Clear BLUE -2150P 8.30 7.89 MMM- Clear Clear -7152B 2.22 2.00 Anti-Scratch/ Panther Low energy impact protection. Ultra light anallergenic frame with low friction length adjustment at the temples and front angle adjustment. Class 1 optical quality. Arms have hang cord attachment points. Adjustable IS1708 KEN- Anti-Scratch/Fog Black -8010K 5.79 4.63 Page 1887

PERSONAL PROTECTION Saturn One-piece clear polycarbonate lens with anti-mist treatment. Lightweight black nylon frame with built-in brow guard. Built-in side protection with integral nose bridge and adjustable temple length. Low energy impact protection with 400nm UV protection. Hang cord attachment points. Class 1. SSF- Clear Black -7610K 4.07 3.26 Over Aurora Totally polycarbonate over specs with built-in side shields and brow guard and no metallic parts. Low energy impact protection at extreme environmental temperatures with UV protection. Can be worn over most glasses. Hang cord attachment points. Class 1. Wide angle lens and impact protection at extreme temperatures. Scratch Resistant. Ultra lightweight design. Anti-mist treatment. Class 1 optical quality for distortion free continuous use. Rubber end tips and nose bridge for user comfort. Neck lanyard included. EU - Low energy impact protection. Tinted lens for reduced glare. AUS/NZ - Medium energy impact protection. UV radiation protection below 400nm for outdoor use. CE 89/686/EEC EN 166 EN 172 AS/NZS 1337 BMP 557823 Adjustable Adjustable SSF- Clear Clear -0800K 2.05 1.64 NEW Mercury One-piece clear polycarbonate lens. Lightweight black nylon frame with built-in brow guard. Integral nose bridge and adjustable temple length. Low energy impact protection. Class 1. SSF- Clear Black -7000K 4.35 3.48 Op-Tema Lightweight full-view lens with built in moulded browbar. Soft, adjustable nosepiece. Adjustable temple length and lens angle. Supravision 9190-315 Flexible side arms with variable inclination can be individually adjusted. The extremely soft Softflex nose piece ensures that even when worn for long periods. Soft ear pieces and the Softflex zone at the temples ensure a secure fit in any situation. Metal-free construction. Adjustable PUL- Clear Black -1029Q 3.96 3.56 Clear Blue -1030R 3.96 3.56 Grey Black -1030H 4.69 4.22 FitLogic Winner of the BSiF Product Innovation Awards 2006, is the first safety eyewear ever to offer a custom fit for your face. Using groundbreaking design and smart engineering, Pulsafe has achieved an unprecedented level of comfort-adjustability. Used for most indoor work applications. PUL- Clear Black & Silver -1937Q 7.91 7.12 NEW Adjustable TFF- Tinted Black -3860K 6.54 5.23 Page 1888 Clear White/Lime -3290M 10.15 9.64

Scratch Resistant Skyper Supravision Extremely lightweight and modern safety spectacle with outstanding field of vision and exceptional adaptability. Temple inclination can be finely adjusted while temple length can be individually set in five different positions with integrated stop lock. and frame made from impact-resistant plastic. Very simple lens replacement. Spectacle provides top UV protection. Frosted side shields provide additional protection against glare. Skylite Ultradura Fashionable design with sport style temples. Adjustable inclination. Impact-resistant polycarbonate class 1 clear lens that provides 100% UV protection. Frosted side shields integrated into the lens. CE approved to 1F. Clear Blue -2410B 5.40 5.13 Clear Black -3700X 9.10 8.65 Scratch Resistant X-One Ultradora Lightweight and comfortable design for all day wear. Sporty wrap around style, duo-spherical lens provides all round vision, sunglare lens filters complete with hang cords, highest quality lens Class 1. Ultradura coated to give lenses exceptional scratch resistance on both sides and maximum protection against harmful UV radiation. Sunglare Grey -2250S 5.20 4.94 X-Twin Lightweight and comfortable design for all day wear. Sporty wraparound style, duo-spherical lens provides excellent all-round vision. Polycarbonate clear lens options, maximum UV protection. Highest optical quality lens. Class 1. Scratch Resistant Viper UV protection against electrical arc discharges caused by a short circuit. Adjustable KEN- Clear Blue -8050K 5.05 4.04 Cord Control Tora CCS Features the integral 3M Cord Control System (CCS), designed to keep corded earplugs attached, untangled and ready to use. Comfortable, lightweight frame. Polycarbonate lens absorbs 99.9% of UV. Meets the requirements of EN 166:2001. Ear plugs supplied separately MMM- Clear Blue -7151B 4.07 3.66 Metalite General use and protection against impact (45m/s). Mechanical work (grinding, turning, milling). Used for most indoor work applications. A stylish metallic frame (nickel free) integrating the most advanced comfort features. Bendable temples to fit your ears. Soft nose bridge to prevent slippage. High protection wrap-around 8-base polycarbonate lenses gives excellent coverage and protection. PERSONAL PROTECTION Clear Blue -2320C 4.50 4.28 PUL- Clear Metallic -2090W 6.41 5.77 Page 1889

PERSONAL PROTECTION Luna One piece clear polycarbonate lens with anti-mist treatment and ultra lightweight design (26g). Built-in side protection with integral nose bridge adjustable temple length and lens inclination. Low energy impact protection with total UV protection. Hang cord attachment points. Class 1. SSF- Clear Black -6610K 4.35 3.48 Scratch Resistant/ T1300 Slimline Low profile design with face-fitting base nine curve. The arms are equipped with padding to offer a comfortable and non-slip fit. Curve nine based polycarbonate lens. Four coatings: scratch resistant, anti-mist, anti-static and anti-uv. Scratch Resistant X-One Ultradora Lightweight and comfortable design for all day wear. Sporty wrap around style, duo-spherical lens provides all round vision, amber lens filters complete with hang cords, highest quality lens class 1. Ultradura coated to give lenses exceptional scratch resistance on both sides and maximum protection against harmful UV radiation. Amber Yellow -2240R 5.20 4.94 Scratch Resistant/ Super G The unique supravision HC-AF technology allows the lens to be coated in such a way that it is extremely cratch-resistant on the outside and anti-mist on the inside. The robust frames have soft, flexible side pieces. This ensures a comfortable, pressure-free fit to take the strain out of working. NRH- Clear Clear -0980M 2.88 Scratch Resistant/ T6500 Lightning Protect against impacts from flying particles. Face-fitting curve and soft nose piece for comfort. Coated curve nine based lens, scratch resistant, anti-mist, static and anti-uv polycarbonate. Manufactured to. Technical performance: impact resistance - 6mm steel ball at 45M/s. Visible light transmission - 92% minimum UV absorption - 99% up to 365nm heat resistance - up to 80 C. Clear Crystal -2360G 7.65 7.27 Clear Navy -2380K 7.65 7.27 Silver/Mirror Crystal -2390K 10.45 9.93 Scratch Resistant Protege Designed with Pulsafe s proprietary Floating technology, an expandable wrap-around brow, soft temple tip pads and moulded rubber nose pads that provide workers with exceptional comfort and flexible style. Protege brings sport-styling, lightweight comfort and flexible design - all weighing less than 28 grams. Combines sports-styling with lightweight comfort and flexible design. Weight each NRH- Clear Clear 40g -0930S 6.82 Page 1890 PUL- Clear Black -2266F 4.96 4.46 Grey Black -2263C 5.35 4.82 Anti-mist Black -2264D 5.73 5.16

/Scratch Resistant Glasses Bandido Ultra lightweight, sports style wrap around that provides the wearer with comfort and a panoramic field of view at a very competitive price. Market leading, optical Class 1 anti-scratch/anti-fog polycarbonate lens with integrated side shields as standard. Tested and approved to EN 166 1F CE. BOL- Yellow Yellow -2020B 4.05 3.65 Clear Black -2050E 4.35 3.92 Clear Crystal -2100M 3.47 3.12 Scratch Resistant/ Tracker Black nylon frame, straight temples with strap, clear PC anti-scratch and anti-fog. Interchangeable foam seal giving brow and cheek protection. Adjustable removable strap. Straight sports temple and optical class 1 anti-scratch and anti-fog polycarbonate wrap around base eight lenses. All round protection. Lightweight, cost effective reliable protection offering the wearer high levels of comfort. Stylish and modern design with slim nose bridge and flat temples for improved compatibility with other PPE. Scratch resistant. Optical Class 1. MMM- Clear -2720M 4.14 3.73 Smoke -2721P 4.36 3.92 Yellow -2722Q 4.36 3.92 Strata A twin lens wrap around safety spectacle with hard coated lenses and burgundy soft frame coating for comfort and fit. Available with clear polycarbonate lenses. PERSONAL PROTECTION BOL- Clear Black -6860D 8.78 7.90 Scratch Resistant Cybric Innovative lenses and side pieces. Goggles with a large protective area, a long field of vision. es have a NanoClean (NC) coating. Uvex Optidur NC coated lenses are now even easier to clean. The Optidur NC coating system is enhanced with nanotechnology, giving these lenses even better nonstick properties. Excellent resistance to scratches and chemicals. -3220A -3230B -3240C -3280G (Blue Mirror Coating) Amber 2-1,2 UV Black/Orange -3220A 8.40 7.98 Clear 2-1,2 UV Black/Orange -3230B 8.40 7.98 Grey 5-2,5 UV Black/Orange -3280G 9.00 8.55 IS1706 RTL- Price/20+ Clear Black -7430K 5.64 4.23 3.95 Utility Pack Force-3 Force-3 delivers three sets of gasket lenses for ultimate versatility I/O (Indoor/Outdoor), Silver Mirror anti-fog and Red Mirror anti-fog. Kit includes a sleek stylish frame with torsion resistance temples, maxi-impact engineered lenses for extreme safety and a triple reflex coating for extreme UV protection and better scratch resistance. Comes complete with a microfibre pouch, an adjustable headband and a storage bag for the replacement lenses. Description PLT- Force-3 Utility Pack -7100A 26.11 23.76 Page 1891

PERSONAL PROTECTION /Scratch Resistant Wrap around safety spectacles have wide angle clear lens that provide a sharp clear view and protect against low energy impacts. UV protection, anti-mist and scratch resistant lens, ultra lightweight twin lens design. Brow ventilation with soft nose pads and temple ends for a comfort. Low energy impact protection at extreme temperatures. Class 1 optical quality for distortion free continuous use. Conform to: EN 166 EN 170. Model TFF- Amber Silverstone -3600K 6.98 5.58 /Scratch Resistant Daytona The wide angle single-piece lens provides low energy impact protection without obscuring any of your field of view. UV protection, anti-mist and scratch resistant lens, ultra lightweight design. Class 1 optical quality for distortion free continuous use. Conform to: EN 166 EN 170. Scratch Resistant X-Trend Supravision The unique supravision HC-AF technology allowsthe lens to be coated in such a way that it is extremely scratch resistant on the outside and anti-mist on the inside. In addition to its stylish design, the X-Trend offers a high level of safety with its large lens, unobstructed vision in all directions, a 20% larger field of vision than with standard spectacles, UV protection up to 400nm and comfortable temples. Clear Clear -2720K 6.20 5.89 Lightweight/Scratch Resistant Tora Contoured, wrap around clear polycarbonate lens with integral browguard for maximum eye coverage. Optimum energy absorption. Supplied with adjustable neck cord for security and convenience. Lightweight at 22 grams. Model TFF- Grey Daytona -3720K 6.25 5.00 Pacific Blue 9212 CLEAR The spectacles provide low energy impact protection (medium in AUS/NZ) whilst the ultra lightweight design and rubber end tips and nose bridge offer enhanced user comfort. Class 1 optical quality for distortion -free continuous use, the wide angle lens is scratch resistant and anti-mist treated. NEW TFF- Clear Blue -1140K 5.04 4.03 Pacific Black 9212 SMOKE Providing low energy impact protection (medium in AUS/NZ), the spectacles feature a wide angle lens which is tinted for reduced glare, as well as scratch resistant and anti-mist treated. The ultra lightweight design, combined with rubber ends tips and nose bridge, enhances user comfort and the lens delivers Class 1 optical quality for distortion-free continuous use. PLT- Clear -6910A 3.42 3.11 Premium Line Fuel X2 Evolutionary design with a sleek frame profile and rimless lower lens. Features include rubber over-moulded adjustable temples, half frame design and soft, adjustable nose-bridge. Supplied with a microfibre pouch. Approved to EN 166:2001. MMM- Bronze Brown -7150K 11.46 10.31 Scratch Resistant/ Silium Provides optimal protection and panoramic vision. Fitted with an optical class 1 anti-scratch/anti-fog polycarbonate lens, the Silium also has integrated side shields, flexible temples, soft adjustable nose pads and Bollé s Tip Grip system for improved fit. Tested and approved to conform to: EN 166/170/ 172 1F CE. NEW TFF- Smoke Black -1150K 5.04 4.03 Page 1892 /170/ 172 1F BOL- Smoke Grey -6410A 6.93 Clear Grey -6420B 6.39

Oberon Blue Featuring a one-piece clear polycarbonate lens with built-in side protection for added safety, these spectacles provide protection from low energy impact (medium in AUS/NZ) and UV radiation below 380nm. The incorporation of rubber end tips and nose bridge into the ultra lightweight design improves user comfort and the lens is scratch resistant and anti-mist treated with Class 1 optical quality for distortionfree continuous use. NEW Europa The Europa SiteSafe safety glasses have two-piece black polycarbonate wrap around lenses providing low energy impact protection, total UV protection, an anti-mist coating. The ultra lightweight high strength frame has a soft silicone nose bridge and adjustable temple length to ensure user comfort. Hang cord attachment points. Class 1. PERSONAL PROTECTION SSF- Blue/Black -7200K 3.91 3.13 Scratch Resistant Solis Polarized - SOLIPOL Black nylon frame with Polarised PC anti-scratch lenses. A polarising filter contains perfectly aligned crystals, which block horizontally polarized light. Acting like a Venetian blind, it makes it possible to eliminate the cause of dazzle and only lets past the light known as useful. Polarised lenses offer an incomparable comfort from all reflective surfaces. The lens provides total improvement of visual comfort by eliminating glare, reducing eyestrain/visual fatigue and improving both colour and contrast perception. / SSF- Black -5420K 4.84 3.87 Scratch Resistant Black one-piece design with wrap around scratch resistant lenses giving low impact protection and UV protection for outdoor use. Class 1. BOL- Black -6530L 31.20 28.08 LED Torch Galaxy 2 built-in LED lights (batteries included). Polycarbonate frame with non-slip nose bridge. Integral side shields. Clear antiscratch, anti-fog and anti-static lens. Conforms to BS /170 1F. / Model SSF- Black Astrid -7800K 3.71 2.97 Yellow Cassini -7820K 3.57 2.86 Scratch Resistant One-piece wrap around polycarbonate spectacle which is light in weight and features hard coated anti-mist and scratch resistant lenses. Replacement batteries Model Pack Qty BOL-904 LR44 6-4000A 2.45 BOL- Black Clear -4820B 12.30 11.07 / Model SSF- Clear Zenith -8400K 4.65 3.72 Yellow Mir -8420K 3.97 3.18 Page 1893

PERSONAL PROTECTION Equipped with straight temple and soft temple ends. Silver nickel-free metal frame with soft PVC temple ends. Weight each NRH- Clear Silver 55g -0910A 7.08 Amber Silver 55g -0912C 7.68 Scratch Resistant TS600 Edge Innovative high performance eyewear that provides protection from low energy impact hazards (45m/s). Unique patented lens change system. es are protected with North s exclusive 4A coating: anti-fog, anti-scratch, anti-uv 99.9%, and anti-static. Supplied as standard with hockey and sport side arms. CE approved to EN 166 1F. Scratch Resistant I-VO Optidur 3000 A revolution in safety eyewear and exceptional comfort through duo-component technology. The combining of two materials (hard/soft) to create comfort zones for sensitive nose and ear areas. Straight temple arm design fits behind the head, not the ear and duo-spherical lens provides excellent field of vision. lens has inclination and temple length adjustment and maximum UV protection. CE approved to 1F. Blue/Orange Amber -1200K 9.25 8.79 Scratch Resistant/ I-Vo Supravision Soft components around the sensitive parts of the face (nose, forehead, ears) guarantee permanent maximum comfort. Adjustable arms and brow bar. Scratch resistant polycarbonate lens and 100% UV protection. NRH- Grey Clear -8402C 5.88 Viper Features one-piece polycarbonate anti-fog/scratch lens, adjustable nylon temples and integrated side shield. Conforms to 1.F and EN170 VIPCI. Clear Blue/Brown -1260R 9.25 8.79 Scratch Resistant Winner Tough, and stylish metal framed safety with sprung side arms, soft-grip temple ends and hinged nose pads for extra comfort. Maximum UV protection. CE approved to EN 166 1F. 1170G 1180H BOL- PC + Nylon Clear -8020B 5.43 4.89 Page 1894 Gun metal Clear -1170G 7.90 7.51 Gun metal Grey -1180H 7.90 7.51

Scratch Resistant Specs X-Act 9176 Very light, frameless safety spectacles for unrestricted vision in all directions. Adjustable lens angle for excellent wearer comfort. Bi-spherical, scratch-resistant lens with integrated side protectors made from high impact-resistant polycarbonate. With the easy to adjust headband. Scratch Resistant/ CONTPSF Contour Fully approved to European safety standards incorporating the unique Bollé lens expertise guaranteeing class 1 optical performance and quality. The polycarbonate lens ensures an exceptional field of view of over 180 combined with high performance anti-scratch and anti-fog coatings as standard. Tested and approved to EN 166/170/172 1F CE. Supplied with micro-fibre pouch. PERSONAL PROTECTION Polycarbonate -2660G 4.90 4.66 XC Manufactured with a 9 base anti-scratch curved polycarbonate lens, optically compensated to give perfect vision without optical distortion or prismatic deviation over the entire dimension of the curve. Adjustable temples and flexible nosepiece ensures excellent fit. BOL- Smoke Black -4050E 7.19 6.47 Scratch Resistant/ Contour Sports The Contour weighs in at an incredible lightweight 21g, making it one of the lightest safety eye shields ever made. Polycarbonate lens, 180 field of view, anti-scratch/anti-mist coatings as standard. Available in clear or ESP lens. Tested and approved to EN 166/170/172 1F CE. PUL- Clear Blue -1630F 7.04 6.34 Cleaning Station Cleaning station for wall mounting. Lightweight and aesthetically pleasing cleaning station enables your employees to improve their own safety with a clear field of vision as well as make their protective glasses last that much longer by means of a simple and uncomplicated cleaning process. Supplied complete with: 1x 0.5ltr lens cleaning solution. 1x pack of 700 silicone-free lens cleaning tissues. Description Cleaning Station -7800K 53.30 50.64 BOL- Clear -4010A 6.63 5.97 ESP -4020B 7.47 6.72 Cleaning Tissues & Cleaning Fluid Toweletts: Moist silicone free, individually sealed, pack of 100. Tissues: Pack of 700. Fluid: Size: 16fl.oz. bottle. Towelettes (100) -7400Y 11.40 10.83 Tissues (700) -7550C 6.20 5.89 Fluid (16fl.oz) -7820M 4.10 3.90 Page 1895

PERSONAL PROTECTION Challenger Two-piece clear polycarbonate lens with anti-mist treatment and ultra lightweight design (26g). Built-in side protection with soft silicone nose bridge and adjustable temple length. Low energy impact protection with total UV protection. Hang cord attachment points. Class 1. SSF- Clear Black -5400K 4.22 3.38 Apollo One piece amber tinted polycarbonate lens with antimist treatment and ultra lightweight design (26g). Built-in side protection with soft silicone nose bridge and adjustable temple length. Low energy impact protection with total UV protection. Hang cord attachment points. Class 1. Optical Class 1 Mechanical Strength F Scratch Resistant/ HTA Nylon frame equipped with adjustable temples. type: smoke. Weight each NRH- Smoke Black 40g -0921K 7.51 Millennia Sport Wrap around sports frame. Lightweight for comfort. One piece polycarbonate abrasion resistant lens. Integral brow and side shields. SSF- Amber tinted Black -5200K 4.77 3.82 Soft Spectacle Case & Spectacle Neck Cord Case: Soft spectacle case with spring opening. Neck Cord: Spectacle neck cord with adjustable side buckle. KEN- Soft Spectacle Case -9560K 2.62 2.10 Spectacle Neck Cord -9620K 1.49 1.19 Page 1896 Optical Class 1 Mechanical Strength F Code 3 Shade 1.2 Manufacture ID D Weight each PUL- Clear - Anti-mist Teal 45g -1320H 6.09 5.48 Clear - Anti-scratch Black 45g -1290W 5.01 4.51 Clear - Anti-mist Black 45g -1291M 6.09 5.48 Spectacle Case, Goggle Bag & Neck Cord Spectacle Case Spring top pouch style spectacle case. Suitable for all Uvex spectacles. Zipper Case - Robust case with reinforced zipper and belt loop. Additional space for spare lens. Goggle Bag Elegant nylon bag with cord, suitable for all goggles. Spectacle Neck Cord Neck hang cord for all Uvex spectacles. Description Spectacle Case -7000A 1.70 1.62 Zipper Case -7100B 4.20 3.99 Goggle Bag -7200H 1.80 1.71 Spectacle Neck Cord -7350S 1.90 1.81

Face Guard Blast Fits to all versions of the Blast goggle and when combined serves the same purpose as a visor but provides even more protection for the wearer's eyes. Tested and approved to EN 166 B. Goggles supplied separately see above. Scratch Resistant/ Goggles Blast The unique shape of the goggle ensures a perfect fit with all respirators and with the face providing maximum comfort and protection. Fitted with a wide adjustable headband and an optical Class 1 anti-scratch and anti-fog vented polycarbonate lens the Blast goggle provides protection against impact, chemicals, dust, gas and molten metal. Tested and approved to EN 166 1B3459 CE. BOL- Scratch resistant -3060R 9.08 8.17 Goggles XL21 goggles with clear single-piece polycarbonate lens and anti-mist coating. Mounted in a PVC housing with easy flow indirect ventilation and adjustable elasticated strap. Mechanical Strength F Goggles Designed to protect the wearer from eye injury against moderate unspecified mechanical impact hazards. Anti-dust and impact resistant. Direct Ventilation ventilation. Description TFF- Goggles Clear -1250K 6.21 4.97 PERSONAL PROTECTION B Description BOL- Blast Face Guard -3200X 5.89 5.30 Goggles Junior Lightweight but strong PVC frame featuring a one-piece clear polycarbonate lens with wide angle of vision. The student goggle includes indirect ventilation which makes it suitable for protection against chemical splash and dust. CE approved to EN 166-1B34. Optical Class 1 Mechanical Strength B Weight each SSF- Green 70g -0500K 3.81 3.05 Chemical Splash Resistant, Anti-Dust Goggles Anti- chemical-splash and impact resistant. Designed to protect the wearer from eye injury against moderate unspecified mechanical impact hazards and liquid splash. Indirect ventilation. Ventilation JSP- Clear Clear -4500A 2.41 1.93 Optical Class 1 Mechanical Strength B Weight each SSF- Green 80g -0520K 4.52 3.62 Page 1897

PERSONAL PROTECTION Scratch Resistant/ Goggles All goggles have a wide field of vision, built-in brow and cheek protection, soft PVC frame with an anatomically shaped bridge to adapt to all faces. All lenses provide UV protection. All frames will protect against liquid droplets and/or splashes. Fitted with wide anallergic elastic headbands and a one-piece replaceable scratch resistant, anti-mist clear lenses. Tiger Medium energy impact protection. Smoke coloured frame with a polycarbonate lens and are lined with soft foam for user comfort and increased adherence. The lens is resistant to molten metals and hot solids (splashes of molten metals and penetration of hot solid). The frame has an indirect ventilation system and is resistant to liquids (drops and splashes) and penetration of hot solids. Foam Face Seal (Scratch resistant) KEN- Polycarbonate Smoke -8140K 13.53 10.82 Clear framed goggles are resistant to gross particles (dust particles >5 microns) and gas and fine particles (gas vapours, splashes, smokes and dust particles <5 microns. Scorpion Medium energy impact protection. Clear frame with a 2mm thick polycarbonate lens. The lens and the frame is resistant to molten metals and hot solids (splashes of molten metals and penetration of hot solids). Lion Low energy impact protection at extreme Wide Headband temperatures. Clear frame with an extremely flexible acetate lens. Scratch Resistant Goggles Ultrasonic Supravision Pioneering full vision goggle with exceptional wearer comfort. The soft flexible component adapts to individual face curvature, providing complete side protection even over prescription spectacles. The outstanding ventilation ensures a pleasant non-irritating interior environment. Scratch-resistant and also provides 100% UV protection. B Clear Orange/Grey -5030N 10.15 9.64 Clear Grey/Black -5050Q 10.15 9.64 Scratch Resistant/ Goggles Ultravision Comfortable, ergonomically designed full vision goggle with unrestricted side visibility provided by 180 panorama lens. Soft face and nose cushioning enables totally airtight and pressure-free fit. Exceptional wearer comfort guaranteed by unrivalled design, broad and fully adjustable head band, sophisticated ventilation system. Easily replaceable lens. Can be used with prescription glasses. Scratch-resistant Supravision coated lens with anti-fog coating and 100% UV protection. Clear lenses. IS1708 Clear Clear -4750R 9.25 8.79 Face Guard Ultravision Unique lower face polycarbonate shield that attaches to the ultravision goggle providing increased facial protection. An alternative to a face shield - the ultrashield completely seals the eyes from potential hazards. Goggles supplied separately see above. EN170 (Scratch resistant) KEN- Scorpion Polycarbonate Clear -8070K 10.37 8.30 Lion Acetate Clear -8080K 9.72 7.78 Accessories Spare KEN- Polycarbonate -8100K 6.61 5.29 Page 1898 Product 9301-317 -4690K 6.55 6.22

Anti-Gas/Flame Resistant Goggles Condor Medium energy impact protection. Suitable for foundry work. The frame, lens and elastic strap are manufactured form flame resistant material. Fitted with a flexible nose bridge to adapt to all faces. Large peripheral viewing area. One piece 2mm anti-mist, scratch resistant clear polycarbonate lens with an extra wide elastic headband. Can be fitted over most prescription glasses. The frame is resistant to liquids (drops and splashes), gross particles (dust particles >5 microns), gas and fine particles (gas vapours, splashes, smokes and dust particles <5 microns and molten metals and hot solids (splashes of molten metals and penetration of hot solids). Group 885 Wide Headband Scratch Resistant/ Goggles Cobra Low energy impact protection at extreme temperatures. UV protection against electrical arc discharges caused by a short circuit. Ultra light nylon frame with length adjustment the temples and front angle adjustment for low friction, lined with soft foam for user comfort and increased adherence. One-piece, scratch resistant, anti-mist clear polycarbonate lens. As well as the arms having hang cord attachment points, a black universal hang cord is included with the goggles. Resistant to liquids (drops and splashes) and gross particles (dust particles >5 microns). Hang Cord Foam Face Seal PERSONAL PROTECTION KEN- Scratch Resistant Red -8130K 16.77 13.42 Spare -8120K 5.08 4.06 Scratch Resistant/ Over Pilot The Pilot safety overglasses have a ultra flexible TPV housing and wide fully adjustable neoprene strap guarantees the wearer optimum levels of fit and comfort. The toric optical class 1 polycarbonate anti-scratch and anti-fog lens provides an excellent field of view and the lens can be easily and quickly changed. Can be worn over prescription spectacles. Conforms to: EN 166 1BT 39 CE. T KEN- Scratch Resistant Blue -8060K 11.74 9.39 Goggles V-Maxx Acetate non-mist lens. Adjustable elastic strap. Indirect air vent. Supplied with two protective lens covers. Conforms to:, D1-349B. ACETATE BOL- Clear Black/Yellow -5830C 10.29 9.26 Optical Class 1 Mechanical Strength B Field of Use 349 Manufacture ID D Weight each PUL- Acetate Clear 100g -1410P 6.98 6.28 Page 1899

PERSONAL PROTECTION Face Guard Replaceable one-piece clear polycarbonate lens which protects against chemical splashes, lens also has an aluminium edge. Built-in foam sweatband with a variable setting on the crown support and a ratchet controlled headband adjuster with a pivoting full face and brow protection. Medium energy impact protection Class 1. Screen - Complete Clear full face screen with high impact polycarbonate browguard, adjustable harness and replaceable sweatband. Clear polycarbonate face screen. Scratch Resistant/ Face Shields Bionic faceshields with anti-fog, anti-scratch, impact resistant clear visor. Large high quality visors provide optimal vision and superior coverage is afforded by extended top of head and chin protection. Numerous adjustments (2784 possible wearer positions) for the most comfortable fit available. Available in acetate or polycarbonate. SSF- Clear -9200K 13.61 10.89 Replacement -9220K 6.79 5.43 Face Shield Clearways s both strength and durability and its weight makes it comfortable enough to wear all day. Browguards CB20 With ratchet headband. CB14 With elasticated headband. Visors CV83P Polycarbonate visor for impact and splash protection. Conform to D.1.B.3. CV83AG Acetate visor for impact and splash protection. Conform to D.1.B.3. CV84AG Acetate visor for impact and splash protection. Conforms to D.1.F.3. Optical Class 1 Mechanical Strength B Description Screen - Complete Accessories TFF- -1510K 19.34 15.47 Browguard Screen Chinguard Visor PUL- Black - Polycarbonate -1724M 33.60 30.24 Clear - Acetate -1744W 22.69 20.42 Face Guard Spares Model PUL- Visor Covers (10) 1001778-1110C 12.61 Protective Visor Cover 1015240-2230P 7.83 Chin Guard - CG7 1002294-1154Z 4.66 Clear - Acetate 1011626-1726P 5.42 Replacement Face Shield SV9PC 230mm clear polycarbonate visor. s splash protection and high resistance to heavy impact. -1-39B. Replacement face shield only. Browguards are supplied separately Green/Clear Shade 3 Tritherm Browguards Headband Model PUL- Ratchet CB20-1159N 8.87 7.98 Elasticated CB14-1160P 6.99 6.29 Visors Model PUL- Clear - Acetate CV84A -1162A 4.79 Clear - Poly CV83P -1161Q 5.45 Green - Acetate CV83AG -1162M 6.19 Clear - Acetate CV84A/CG -1161T 6.00 Page 1900 Green Shade 3 Tritherm Optical Class 1 Mechanical Strength B Description TFF- Screens - 200mm Clear -2500K 6.35 Green/Clear, Shade 3, Tritherm -3200K 29.77 Chinguard -2518K 4.89 Chinguard and Screen Complete -2512K 11.54 Clear Screen for Chinguard 160mm -2514K 6.25 Product PUL- 1002312 Shield -1156X 8.34 7.51 1002297 Browguard -1155K 13.41 12.07

ArcPro Clear Screen System Kit Connect ArcPro Anti Electric Arc Face Protection NEW The Centurion ArcPro PPE system has been designed to protect against Arc Flash risks posed by electrical faults which can occur in the following situations: during live cable jointing, phase angle testing, switchgear racking operations, excavating near live cables, isolating and reclosing of switchgear and working on or near live conductors. ArcPro Light Green Screen System Kits ArcPro Light-Medium Green Screen System Kits These ArcPro kits comprise of a white Concept reduced peak unvented helmet with Premium Twist2Fit ratchet, Vabon sweatband and a choice of ArcPro face screens fitted to ArcPro carrier. S25WCCAEA KIT To EN 397, 1000V a.c, LD, MM, -40 C, EN 166 1 B 8 9 3 (EN 170 2-1,2). Excludes Ear Defenders. S25WCC6AEA KIT To EN 397, 1000V a.c., LD, MM, -40 C, EN 166 and EN 170:2002 GS-ET-29:2010 2C-1.2 1 B 8-2-0 3. S25WCC12AEA KIT To EN 397, 1000V a.c., LD, MM, -40 C, EN 166 and EN 170:2002 GS-ET-29:2010 2C-1.4 1 B 8-2-1 3. PERSONAL PROTECTION Product CNT-957 S25WCCAEA -2040D 47.68 Product CNT-957 S25WCC6AEA -2040G 120.30 S506S57 KIT Consists of anti-fog light green face screen, chin guard and carrier illustrated above (helmet not included). Product CNT-957 S506S57-9920X 106.05 Product CNT-957 S25WCC12AEA -2040K 129.22 S512S57 KIT Consists of anti-fog light-medium green face screen, chin guard and carrier illustrated above (helmet not included). Product CNT-957 S512S57-9921Y 114.96 ArcPro Hi-Temp 300 Carrier and Face Screen S57CVAEA If a helmet mounted system is required, then the S57CVAEA Hi-temp 300 carrier should be used as opposed to the S54 nylon carrier. To. S590AEA Full length face screen (225mm). To EN 166 1 B 8 9 3 (EN 170 2-1,2). N.B. Picture illustrates carrier and 225mm face screen available separately (helmet and ear defenders not included). ArcPro Browguard/Chin Guard/Face Screen S89CAEA Choose an ArcPro browguard if head protection is not required. To EN 166. S91C Use with S910AEA face screen if chin protection is required. To EN 166. S910AEA Reduced length face screen (180mm) enables optional chin guard to be fitted. To EN 166 1 B 8 9 3 (EN 170 2-1,2). N.B. Picture illustrates 180mm browguard, chin guard and face screen available separately. Product CNT-957 S57CVAEA 300 Carrier -9865Y 19.68 16.53 S590AEA Face Screen -9932L 15.47 12.99 Product CNT-957 S89CAEA Browguard -9870E 15.53 13.05 S91C Chin Guard -9871F 5.37 4.51 S910AEA Face Screen -9946C 15.32 12.87 Page 1901