Main Frame Used to form the head, sill, and jambs of the frame. Part No. 2530XX Veka SH7301 Sill Adapter Snaps into the main frame in order to cover the junction between the sash and the frame, as well as to provide a pocket for the sash to slide in. Part No. 2531XX Veka SH7306 Screen Adapter Snaps into the main frame to cover the pocket on the exterior side of the frame (provides track which holds screen frame in place). Part No. 2536XX Regenex SH7307 CMR Bead Used at the interlock. (3S40,3S10,3S21) Part No. 2524XX Adept 2118 28
Balance Cover Snaps into the main frame at jambs (single hung) or head/sill (slider) to provide a latch point for the tilt latches, as well as to conceal the balance system (single hung). Part No. 2509XX Regenex 1110-W201 Lower Sash Used in conjunction with the inside CMR to form the sash. Part No. 2516XX Premium 5720 CMR Sash Interlock Used to form the interlock member of the inner sash (houses the lock hardware). Part No. 2515 Premium 5720 Mullion Used to form the interlock member of the fixed portion of the window (houses the lock hardware). Part No. 2535 Veka SH7304 29
Bumper and Pocket Cover Snaps into the main frame at jambs (single hung) or head/sill (slider) to provide a stop for the sash. Part No. 2512XX Regenex 2167 Sash Reinforcement Steel reinforcement used to stiffen sash members (used in the main sash and mullion). Part No. (varies according to size) Screenco (varies according to size) Glazing Bead with Pull Rail Same as glazing bead with built-in pull rail. Part No. 2523 Regenex 2119 Glazing Bead Snaps into the sash in order to secure the insulated glass unit in the operable portion of the window. Part No. 2538 Adept BV46 30
Insulated Glass Unit Insulated glass unit with super spacer. Part No. Setting Blocks 1/8" (black) Used as a spacer between the insulated glass unit and the sash frame (quantity determined by size of window). Part No. 40084 Prot-tac Inc. 29850BCS + 101 BLACK Constant Force Balance Springs Used in conjunction with either single or dual supports to maintain the vertical position of the sash in single hung windows (number and size based on sash weight). Used with single hung model with constant force balances. (3S40) Part No. (varies according to size) John Evans (varies according to size) Constant Force Single Supports Used in conjunction with constant force balance springs in single hung windows to maintain vertical position of the sash. Used with single hung models with constant force balances. (3S40) Part No. 5970A Ashland M-090151A 31
Constant Force Flared Pivot Bar Pivots in constant force pivot shoe while anchored to sash (flared end prevents bar from pulling out of shoe). Requires #8 x 1" flat head screws (part no. 3002XX) to attach to sash. Used with all single hung models with constant force balances. (3S40) 59317 Four Jacks Part No. M-090160SS/5 Instalock Pivot Shoe Facilitates pivot motion of sash in tilt sliders (rides in pocket of main frame). Used with single tilt slider models less than 72" wide. (3S21) Part No. 61121 Ashland Hardware Systems 94-01-59-A0 Instalock Extended Knob Used in combination with the instalock pivot shoe to facilitate the pivot motion of the sash in tilt sliders (inserted into the pivot shoe). Used with single tilt slider models less than 72" wide. (3S21) Part No. 61130 Ashland Hardware Systems 94-01-59-A0 Instalock Pivot Bar Pivots in Gaer shoe while anchored to sash. Used with single tilt slider models. (3S21) Part No. 61122 Ashland 33-03-00-00 32
Slotted Weep Hole Cover Covers weep holes on exterior in order to resist wind and water infiltration. Part No. 6017XX Ashland Hardware 97030000 Clear Belly Buttons Plastic buttons used to hold the screen in place. Part No. 601600 S.I.L. Plastics #135 Limit Latch Side loaded push and release night latch installed on the interior side of the outer sash. 6004XX Ashland Part No. Hardware 86108-385 Roll Form Screen Rail Used to form the frame of the screen. Part No. 1010XX Screenco Mfg. Co. S124 33
Screen Corners (Roll Form) Used to join screen rail at the corners (UPPER) Part No. 6091XX Screenco Mfg. Co. S352P Screen Corners (Roll Form) Used to join screen rail at the corners to facilitate the removal of the screen if required. (lower) Part No. 6090xx Screenco Mfg. Co. S352P Corner Key (Painted only- Roll Form) Internal corner key used with painted roll form screen rail. Part No. 604000 Screenco S352 Screen Pulls (Painted only- Roll Form) Facilitate removing screen from main frame (attached to screen rail); used with roll form screen rail only. Part No. 61020 Screenco S 500 34
Compression Springs (Roll Form) Metal springs used to facilitate inserting and removing the screen from the main frame; located along the edge of the screen rail. Part No. 61170 Springco Industries 58664 Extruded Screen Rail Used in conjunction with the extruded screen rail with pull rail to form the screen frame. Part No. 1001XX Astro 13363 Extruded Screen Rail with Pull Rail Same as extruded screen rail with built-in pull rail. Part No. 1002XX Astro 13364 Corner Key (Extruded) Internal corner key used with extruded screen rail. Part No. 61190 Deco Products Ltd. 239201M6 35
Compression Springs (Extruded) Metal springs used to facilitate inserting and removing the screen from the main frame; located along the edge of the screen rail. 61180 Gar-V Manufacturing Part No. 3769-188B Screening Material Black fiber mesh insect screening. Part No. 41000 New York Wire 0.140" Screen Spline (Roll Form) Holds screening material in the groove of the screen rail. Part No. 42000 Screenco Brass Roller Used on underside of sashes in a lift-out slider; facilitates sliding by running along a groove in the sill adapter. Used with single lift out slider models. (3S10) Part No. 61140 Vision BRASS ROLLER 36
Flush Mount Lock Flush mounted lock bored into and fastened to the inside CMR. Requires #8 x 1" flat head screws (part no. 3002XX). Used with single hung and single slider models. 3414 Truth Hardware Part No. 9368 Flush Mount Keeper Flush mounted keeper bored into and fastened to the mullion. Requires #8 x 1-1/2" flat head screws (part no. 3003XX). Used with single hung and single slider models. Part No. 3415 Truth Hardware C09372 0.160" Pile Weatherstripping Used between interlock sash members in order to provide a weather seal (2 rows). 40072 Ultrafab Part No. W231617W0000 0.260" Pile Weatherstripping Used along outer edges of sash, other than on interlock members (3 rows). Part No. 40074 Ultrafab W232317W0000 37
Tilt Latch (Standard) Installed on the inside CMR for single hung and single sliders. Part No. 6014 (LH), 6015 (RH) Ashland Hardware Systems 77400 (LH), 77500 (RH) Tilt Latch Latching mechanism that controls the pivoting motion of the sash (single hung and single tilt sliders), as well as to hold the sash in the frame (single lift out slider). (Used in specific cases where the standard cannot be installed.) Part No. 6007XX (LH), 6008XX (RH) Ashland Hardware Systems 76600 (LH), 76700 (RH) #8-32 x 3/8" Pan Head Screw (Self-Threading) Used to fasten the Gaer pivot bar to the sash Used with single tilt slider models. (3S21) Part No. 30070 Robertson 38
#8 x 7/8" Pan Head Screw Used to fasten the spiral or constant force balances to the main frame. Used with all single hung models. (3S40) Part No. 30130 Robertson #8 x 1" Flat Head Screw Used to fasten the lock to the inside CMR as well as to fasten the pivot bar to the sash in a single hung. Part No. 3002XX Robertson #8 x 1-1/2" Flat Head Screw Used to fasten the keeper to the outside CMR Part No. 3003XX Robertson Limit Latch Side loaded push and release night latch installed on the interior side of the outer sash. 6004XX Ashland Hardware Systems Part No. 86108-385 39
Mullion Clips Used to attach the mullion to the frame. Used with all single hung and slider models. 61456 Rainbow Part No. Red Setting Blocks 3/32" Used as a spacer between the insulated glass unit and the sash frame. 40111 Pro-Tac Part No. 1/16" x 3/8" Glazing Tape Two-sided adhesive foam tape, used to seal the glass to the frame and/or sash. 40125 Venture Tape Part No. 40