About Us 4 Dermal Fillers 5 Mesotherapy 14 Bio-revitalization 18 Dermal Fillers with Peptides 22 Products Based on PDRN 25
YOUR GLEMOR YOUR SECRET.
WHEN THE PRODUCT IS TOP-NOTCH IT CAN BE SEEN AND FELT ON EVERY EACH AND LAYER OF THE SKIN! Sculpt Dermal Fillers creating a revolution in the beauty world as we know it. These products are the result of meticulous Research and Development Process of the manufacturer Dr. Korman Laboratories, aimed for creating the best solution in the field of beauty and aesthetics. Our company is engaged in delivering the best dermal fillers, based on non-animal hyaluronic acid (Cross Linking). The raw materials of the fillers underwent long process of purification, in order to create the most natural, yet powerful method for sculpting the face, smoothing our wrinkles and intensifying the natural jaw-line and the oval of the face. Our lab results and our clients show that we are among the leaders in our field in the world. CREATING A LUXURY MASTERPIECE IN THE BEAUTY WORLD Every great product starts with a vision. Sculpt Dermal Fillers are the result of a vision defined by Dr. Korman in his laboratory, in the quest of creating the best and Luxury solutions for aesthetic treatments. BEING AT THE FRONT OF TECHNOLOGY The result of sculpt is no short than amazing being one of the leading solutions in the world of beauty and aesthetics, the first choice of the best dermatologists and plastic surgeons, of those who are constantly seeking ways to create sculpting effect without invasive means, without scars, pain and long recovery. 4
SCULPT DERMAL FILLERS THE ADVANTAGES OF SCULPT LUXURY DERMAL FILLERS Sculpt Dermal fillers are monophasic, we offer the best solution for both the patients and the Dermatologists, plastic surgeons and physicians thousand patients creating the perfect result for the former and the best practice abilities for the later. The fillers defined by dynamic viscosity range of 65,000-135,000 CP, BBDE -2 PPM and two needles 27G1/2 TSK Laboratory (Japan) of providing enormous operating range and the perfect solution for the patient no reddishness, pain or side effects. The product was certified by the CE. It was tested and approved for ISO9001 and ISO13485 standards Outside corner Cupids bow Lower lip Lip line Upper lip
SCULPT 18 This is a sterile, biodegradable, viscoelastic, clear, homogeneous, gel implant for intradermal injections based on hyaluronic acid of non-animal origin. This filler treats the following: medium to deep wrinkles, skin folds, modeling of lip contour and volume, submental crease, reinforcement of the perioral area, neck and décolletage reinforcement, correction of nasal labial fold, correction of wrinkles in the corners of the eyes. PROPERTY SPECIFICATIONS Appearance Homogeneous, colorless, transparent viscous gel HA quantification 18 mg/ml (Mw # 3000 kd) Osmolality 300 mosmol/kg ph 7.0 Dynamic Viscosity 65 000 CP Residual BDDE - 2 ppm Bacterial endotoxin < 0.5 EU/ml Sterility Sterile glabellar and forehead areas small lines around the eyes bioreinforcement of malar areas and cheeks purse-string wrinkles Product Configuration: Glass prefilled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 6
SCULPT 23 This is a sterile, biodegradable, viscoelastic, clear, homogeneous, gel implant for intradermal injections based on hyaluronic acid of non-animal origin. This product helps with the elimination of atrophic scars, correction of fine superficial wrinkles (crows feet, perioral wrinkles, glabella area and neck wrinkles). The preparation also helps with the following: correction of nasolabial fold and labial fold; filling of the temporal area; chin reinforcement; volume replenishment in hands; lip volume and lip contour correction; re-creation of philtrum columns; creation of stiffeners; sculptural face correction; complex facial rejuvenation. PROPERTY SPECIFICATIONS Appearance Homogeneous, colorless, transparent viscous gel HA quantification 23 mg/ml (Mw # 3000 kd) Osmolality 300 mosmol/kg ph 7.0 Dynamic Viscosity 116 000 CP Residual BDDE - 2 ppm Bacterial endotoxin < 0.5 EU/ml Sterility Sterile deep wrinkles in glabellar area nasolabial fold marionette lines correction of lips (shape, volume. lip line) Product Configuration: Glass pre-filled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 7
SCULPT 26 This is a sterile, biodegradable, viscoelastic, clear, and homogeneous gel implant for intradermal injections based on hyaluronic acid of non-animal origin. It can be used for correction of deep wrinkles and skin folds, and volumetric correction and reconstruction of the contours of the face. It has shown good results in r supraperiosteal correction of the zygomatic area. SCULPT 26 may help increase the chin, alignment of the contour of the lower jaw; with a deformation type of aging and a sufficient volume of soft tissues, correction of nasolabial folds is also possible. PROPERTY SPECIFICATIONS Appearance Homogeneous, colorless, transparent viscous gel HA quantification 26 mg/ml (Mw # 3000 kd) Osmolality 300 mosmol/kg ph 7.0 Dynamic Viscosity 135 000 CP Residual BDDE - 2 ppm Bacterial endotoxin < 0.5 EU/ml Sterility Sterile bioreinforcement of malar areas and cheeks face recontouring deep nasolabial folds marionette lines correction of chin Product Configuration: Glass pre-filled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 8
SCULPT VISION The intradermal filler, based on hyaluronic acid of non-animal origin, has been designed specifically for correcting signs of photo-damage and chrono-damage of periorbital area. It is suitable for all skin types and can be applied to any area of the body, face, neck, décolletage or hands. PROPERTY SPECIFICATIONS Appearance Homogeneous, colorless, transparent viscous gel HA quantification 8 mg/ml (Mw # 3000 kd) Osmolality 300 mosmol/kg ph 7.0 Dynamic Viscosity 7 000 CP Residual BDDE -2 ppm Bacterial endotoxin < 0.5 EU/ml Sterility Sterile small lines in the forehead and glabellar areas periorbital area cheeks purse-string wrinkles white roll (in the vermilion border of lip) correction of neck wrinkles Product Configuration: Glass prefilled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 9
SCULPT 12 The intradermal filler, based on hyaluronic acid of non-animal origin, has been developed to improve hydration potential. In addition to improving turgor and density of the skin of the neck and décolletage, it reduces wrinkles and lines in the forehead as well as in the periorbital and perioral area. The filler also helps reduce auricular lines, smoker s wrinkles, marionette lines, inner surface of the shoulder, back surface of hands, crisscrossed wrinkles of the brow and vertical wrinkles of the glabellar area. PROPERTY SPECIFICATIONS Appearance Homogeneous, colorless, transparent viscous gel HA quantification 12 mg/ml (Mw # 3000 kd) Osmolality 300 mosmol/kg ph 7.0 Dynamic Viscosity 25 000 CP Residual BDDE -2 ppm Bacterial endotoxin < 0.5 EU/ml Sterility Sterile glabellar and forehead area wrinkles around the eyes reinforcing of cheeks purse-string wrinkles correction of the rings of venus or neck wrinkles Product Configuration: Glass prefilled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 10
SCULPT LIPS The intradermal filler, based on hyaluronic acid of non-animal origin, has been designed specifically for correction of signs of photodamage and chrono-damage of skin around the lips and perioral area. Hyaluronic acid in the product promotes internal regeneration of extracellular matrix and prevents aging of the skin. Intradermal filler provides long-lasting lip hydration, so that the lips can retain their bright saturated color for an extended period of time. PROPERTY SPECIFICATIONS Appearance Homogeneous, colorless, transparent viscous gel HA quantification 14 mg/ml (Mw # 3000 kd) Osmolality 300 mosmol/kg ph 7.0 Dynamic Viscosity 38 000 CP Residual BDDE -2 ppm Bacterial endotoxin < 0.5 EU/ml Sterility Sterile filling deep wrinkles in the forehead glabellar and periorbital areas filling wrinkles in the neck area Product Configuration: Glass prefilled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 11
WHY CHOOSE SCULPT DERMAL FILLERS? The Sculpt Dermal Fillers are being sold extensively in the world for the last years, creating a real revolution in the world of beauty, making sure that any dermatologist, plastic surgeon or clinic can offer its clients the best, most advanced and effective way to sculpt thick and fine lines of the face, and creating the desired youthful appearance that everyone deserves to have. Before Treatment After Treatment Before Treatment After Treatment Before Treatment After Treatment Before Treatment After Treatment SMILE LINE AREA SIDE OF THE FACE LIP AUGMENTATION YOUR GLEMOR. CROW S FEET AREA 12
YOUR GLEMOR. YOUR SECRET. 13 EXCELLENT PATIENT SATISFACTION 9.66
SCULPT MESOTHERAPY In this method, microdoses of pharmacological components are injected into the skin or muscle. This includes allopathic and homeopathic varieties, as well as vitamin complexes. Mesotherapy acts both locally and at a measurable distance beyond the affected area. Mesotherapy provide successful solutions for enhancing facial, body, hair and scalp aesthetics. FLASH Recovery of elasticity and tonicity of skin SCULPT ANTICELLULITE SOLUTION Injection lipolysis LIFT CLASSIC Anti-aging therapy SCULPT HAIR TREATMENT SOLUTION Complexes for hair restoration and growth ANTI DARK CIRCLE Biopeptide complexes
МMezotherapy FLASH Product Configuration: Glass vial 6 ml with rubber stopper and a protective cap. Composition/Ingredients:Water for injection, glycine, alanine, acetylcysteine, acetyl tyrosine, cysteine, threonine, valine, ornithine, proline, aspartic acid, asparagine, arginine, histidine, tryptophan, phenylalanine, isoleucine, leucine, glutamic acid, methionine, lysine, serine. The multi-active solution contains active ingredients providing the following benefits: eliminate oxidative stress of the skin, promote oxygen saturation of the skin, and neutralize the lack of hyaluronic acid by stimulating its natural production. The solution activates the proliferative and synthetic function of fibroblasts, thereby improving microcirculation and accelerating regeneration. MECHANISM OF ACTION Restoration of skin showing signs of photo-aging and chrono-aging; Powerful antioxidant action; Restoration of skin with reduced tone and turgor, increase of skin elasticity; Toning and revitalization of the skin. SCULPT ANTI CELLULITE SOLUTION Product Configuration: Glass vial 6 ml with rubber stopper and a protective cap. Composition/Ingredients: water for injection, isoleucine, leucine, lysine hydrochloride, methionine, phenylalanine, threonine, tryptophan, valine, arginine, histidine, glycine, alanine, proline, aspartic acid, asparagine, acetylcysteine, glutamic acid, ornithine hydrochloride, serine, tyrosine, acetyl tyrosine, caffeine. The product, when used with direct lipolytic action, will correct local fat deposits for small quantity nonsurgical liposuction. MECHANISM OF ACTION The composition of the complex is supplemented with components that normalize fat metabolism. It potentiates the effect of direct lipolysis as well as reduces the free radical load on tissues and the possibility of adverse reactions. APPLICATION AREA: Work with local fat deposits; Non-surgical small-volume liposuction. 15
МMezotherapy ANTI DARK CIRCLE Product Configuration: Glass vial 6 ml with rubber stopper and a protective cap. Composition/Characteristics: Sodium hyaluronate, water for injection, decapeptide-4, arginine, histidine. High-molecular hyaluronic acid combined with various amounts of amino acids and peptides to restores skin cell metabolism. Collectively, these active elements achieve an excellent equilibrium to normalize the skin s condition by improving biochemical parameters. MECHANISM OF ACTION: Gravitational ptosis, prevention and correction of age-related skin and facial changes; wrinkles, flabbiness and dry skin, reduction of the depth of wrinkles around the eyes and their prevention; improvement of blood circulation and elimination of dark undereye circles, rehabilitation after aggressive cosmetic procedures (chemical peelings, polishing, plastic surgery, etc.) APPLICATION AREA: Face, neck, décolletage; Body: the back of the hand, palms, inner thighs, anterior wall of abdomen. SCULPT HAIR TREATMENT SOLUTION Product Configuration: Glass vial 6 ml with rubber stopper and a protective cap. Composition/Characteristics: Sodium hyaluronate, 0,9% solution of sodium chloride, myo inositol, glycine, L-alanine, L-asparaginase, L-aspartic acid, L-cysteine hydrochloride, L-glutamic Acid, L-histidine, L-isoleucine, folic acid, thiamine, niacin, pantothenic acid, pyridoxine, cobalamin. This multi-active solution can be administered for treatment of alopecia (androgenic, focal, etc.), seborrhea of the scalp, and restoration of damaged hair follicles. By stimulating hair follicle microcirculation, this product ensures the delivery of nutritional ingredients necessary for the formation of the hair shaft. This results in enhanced growth, stronger hair follicle structure and reduction in hair loss. MECHANISM OF ACTION: The hair loss process is halted by increasing the duration of the anagen phase. This stimulates the hair follicle blood supply and reduces its sensitivity to androgens. The product components thicken the hair shaft and assist in reducing the onset of premature graying. APPLICATION AREA: Scalp. 16
МMezotherapy LIFT CLASSIC Product Configuration: Glass vial 6 ml with rubber stopper and a protective cap. Composition/Characteristics: 2-dimethylaminoethanol, Tartaric acid, Organic silicon. Sculpt DMAE is a powerful rejuvenating meso-cocktail that effectively fights flabby skin, facial wrinkles and neck wrinkles in the décolletage zone. Sculpt DMAE also smooths the skin, reduces the appearance of pigmentation spots and the severity of vascular patterns. The meso-cocktail strengthens and tightens the skin and is indispensable for patients with manifestations of gravitational ptosis with finely wrinkled, tired and deformative types of aging. Through its powerful lifting effect, Sculpt DMAE restores muscle tone and firmness and increases skin density. MECHANISM OF ACTION: The solution stimulates myofilaments of the dermis and facial muscles, structures the cellular skeleton, moisturizes the dermis and leads to a pronounced lifting of soft tissue of the face. It contains active ingredients that improve overall quality of the skin. Where a deficiency of hyaluronic acid production occurs, the solution can help restore the skin s hydro-balance. As proliferative and synthetic functions of fibroblasts are activated, the amount of collagen fibers is increased. Microcirculation is augmented, migration processes in the matrix are improved, and oxidative stress of the skin is eliminated. APPLICATION AREA: Face, neck, décolletage; Body: the back of the hand, palms, inner thighs, anterior wall of abdomen. 17
SCULPT BIO-REVITALIZATION A method of restoring hydro-balance and improving the qualitative characteristics of the skin by intradermal injections of non-cross-linked hyaluronic acid. Hyaluronic acid is a negatively-charged polyanionic polymer with a physiological ph. Its water-binding enhances hydration. Hyaluronic acid is a Sculpt bio-revitalizant which creates an optimal environment for the normal functioning of fibroblasts and mucopolysaccharides. Fibroblasts are synthesizing and secreting proteins of the intercellular matrix (collagen and elastin). In addition to assisting with transport and distribution of water within tissues, mucopolysaccharides determine the barrier and protective functions of the intercellular space, increase skin elasticity, normalize its moisture and promote a wound-healing effect. The size of HA molecule in Sculpt bio-revitalizant is 3,000,000 Da. This ensures longer preservation of hyaluronic acid in the tissues - allowing anti-aging correction to become more physiological - and emphasizes the uniqueness of the products in this line. Sculpt bio-revitalizants are manufactured in vials of 6 ml and in syringes of 1.6 ml for physician convenience. The low concentration of hyaluronic acid in Sculpt bio-revitalizants is intended to work with the skin during the initial stages of the aging process. In contrast, a highly concentrated solution of hyaluronic acid is a powerful hydration solution for age-related atonic, flabby, and severely dehydrated skin with delayed cell function.
Bio-revitalization SCULPT VITAL / VIAL 6 ML SCULPT REVITA 6 / SYRINGE 1,6 ML Appearance Property HA quantification Osmolality ph 7.0 Dynamic Viscosity Bacterial endotoxin Sterility Specifications Homogeneous, colorless, transparent viscous gel 6 mg/ml (Mw # 3000 kd) 300 mosmol/kg 4 270 CP < 0.25 EU/ml Sterile Application area: Facial skin, neck, décolletage, hands and body (thighs, shoulders, anterior abdominal wall). Indications and usage: Pitted acne scars, hyperpigmentation, diffusion of a small grid of wrinkles in the periorbital zone of the face, rehabilitation after chemical peelings, sunburn, treatment of couperose. Product Configuration: Sculpt Revita 6 pre-filled syringe 1.6 ml. Sculpt Vital glass vial 6 ml with a rubber stopper and protective cap. SCULPT ACTIVE / VIAL 6 ML SCULPT REVITA 7 / SYRINGE 1,6 ML Appearance Property HA quantification Osmolality ph 7.0 Dynamic Viscosity Bacterial endotoxin Sterility Specifications Homogeneous, colorless, transparent viscous gel 7 mg/ml (Mw # 3000 kd) 300 mosmol/kg 9 300 CP < 0.25 EU/ml Sterile Indications and usage: Involutional of facial skin, neck, décolletage, hands and body (inner surface of the shoulders, thighs, anterior wall of the abdomen); evolving gravitational ptosis; correction of stretch marks and atrophic scars; skin folds; preparation for plastic surgery, laser resurfacings, chemical peelings and rehabilitation of the skin after these procedures. Product Configuration: Sculpt Revita 7 pre-filled syringe 1.6 ml. Sculpt Active glass vial 6 ml with a rubber stopper and protective cap. 19
Bio-revitalization SCULPT PERFECT / VIAL 6 ML SCULPT REVITA 8 / SYRINGE 1,6 ML Appearance Property HA quantification Osmolality ph 7.0 Dynamic Viscosity Bacterial endotoxin Sterility Specifications Homogeneous, colorless, transparent viscous gel 8 mg/ml (Mw # 3000 kd) 300 mosmol/kg 12 400 CP < 0.25 EU/ml Sterile Indications and usage: Revita 8 is intended for symptoms of smoker s skin and stress skin. It also helps with rejuvenation, lifting, increased skin tone in the inner surface of the shoulder, patella, anterior abdomen and back of the hands. Its ability to bio-reinforce the face and correcting stretch marks and atrophic scars makes it the perfect choice for men. Product Configuration: Sculpt Revita 8 pre-filled syringe 1.6 ml. Sculpt Perfect glass vial 6 ml with a rubber stopper and protective cap. SCULPT REGEN / VIAL 6 ML Appearance Property HA quantification Osmolality ph 7.0 Dynamic Viscosity Bacterial endotoxin Sterility Specifications Homogeneous, colorless, transparent viscous gel 9 mg/ml (Mw # 3000 kd) 300 mosmol/kg 16 000 CP < 0.25 EU/ml Sterile Indications and usage: Signs of pronounced photo aging and chrono-aging of the face; moderate accerelated changes in the skin of the neck and décolletage; rejuvenation, lifting, increased skin tone in the inner surface of the shoulder, patella, anterior abdomen, back of hands; bio-reinforcement of the face; correction of stretch marks and atrophic scars. Product Configuration: Sculpt Regen glass vial 6 ml with a rubber stopper and protective cap. 20
Bio-revitalization SCULPT BOOST The bio-revitalizant has a prolonged action when used with glycerol. This allows recreation of the optimal physiological environment for stimulation of fibroblasts. It facilitates the synthesis of hyaluronic acid, collagen and other components of the cellular matrix. In addition, the bio-revitalizant preserves natural volume and promotes deep hydration. It is effective for correcting the microrelief. In delicate areas, it stimulates synthesis of its own dermal structures and strengthens them. The product is perfect for bio-revitalization and bio-reinforcement. Appearance Property HA quantification Glycerol Osmolality Specifications Homogeneous, colorless, transparent viscous gel 18 mg/ml (Mw # 3000 kd) 20 mg/ml ph 7.0 Dynamic Viscosity Bacterial endotoxin Sterility 300 mosmol/kg 100 000 CP < 0.25 EU/ml Sterile The powerful antioxidant glycerol slows oxidative reactions and prevents the formation of free radicals, which influence the aging process. Thus, glycerol acts as a «protector» of hyaluronic acid from assault by free hydroxyl groups. Application area: Facial skin, neck, décolletage zone and hands. Indications and usage: Bio-revitalizant can prevent dehydration and dry skin for two weeks when traveling to hot areas and two weeks after active insolation. This product is recommended for use in preparation for medical and deep chemical peelings, dermabrasion, and laser resurfacing. It is also recommended for preparation of plastic surgery and rehabilitation. Product Configuration: In a glass syringe, 1.0 ml inside a blister pack with two needles: 27G TSK Laboratory (Japan). Blister is packed in a box. The product is intended for single use only. 21
SCULPT DERMAL FILLERS With peptides Dermal fillers contain peptide complexes such as Nonapeptide-18 (CG-Formade) and Oligopeptide-55 (CG-Collagrin). Nonapeptide-18 (CG-Formade) suppresses the activity of hyaluronidase and matrix metalloproteinase which cause collagen reduction. With the use of fibroblasts, it regulates the synthesis of hyaluronic acid and increases synthesis of collagen fibers. Oligopeptide-55 (CG-Collagrin) has a powerful antioxidant effect and is responsible for regulating cell proliferation with keratinocytes and fibroblasts. Both of these complexes compensate for the lack of regulatory peptides, one unique features being that the skin s aging process is slowed. The vital peptide features include modulation of the cell apparatus activity and organizational methods and functional transfer of the cell to a rational, «anti-age» mode. This contributes to the restoration of the neuro and immuno-endocrine regulation of the skin to an earlier more youthful stage. Nonapeptide-18 (CG-Formade) and Oligopeptide-55 (CG-Collagrin) inhibit the activity of hyaluronidase and MMP2 and increase the production of collagen, elastin and hyaluronic acid in the body by 80%. Their presence in the skin prolongs activity of the product. The injected filler not only immediately corrects the problem, but also stimulates formation of new connective tissue at the injection site. The use of dermal fillers gives a pronounced improvement with a minimum amount of gel as well as prolonging the effect of rejuvenation. Due to the peptide crosslinks of hyaluronic acid molecules, new fillers are becoming more stable and elastic than those of the previous generation. The peptides enable isovolumetric biodegradation of the product, alleviating the need for hypercorrection. Advantages of these fillers: Instant effect and lasting result Stimulation of skin rejuvenation processes Multifunctionality and wide range of indications Safety and efficiency Peptide complex
SCULPT P 20 Correction of superficial wrinkles on the forehead: nasal bridge, mimic wrinkles of the perioral and periorbital areas, reduction in severity of deep wrinkles, facial skin bio-reinforcement (nasal labial folds, auricular fold, marionette lines, facial contours), body skin bio-reinforcement (abdomen anterior surface, inner surface of the shoulder, patellar area, opisthenar); elimination of horizontal neck folds, elimination of the effect of protuberating tendons and veins on the opisthenar; restoration of neck and décolletage elasticity. PROPERTY Appearance Peptide complex HA quantification Osmolality ph 7.0 Dynamic Viscosity Residual BDDE Bacterial endotoxin Sterility SPECIFICATIONS Homogeneous, colorless, transparent viscous gel Nonapeptide-18 (CG-Formade) and Oligopeptide-55 (CG-Collagrin) 20 mg/ml (Mw # 3000 kd) 300 mosmol/kg 95 000 CP -2 ppm < 0.25 EU/ml Sterile glabellar and forehead areas small lines around the eyes bioreinforcement of malar areas and cheeks purse-string wrinkles Product Configuration: Glass prefilled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 23
SCULPT P 24 Carrying out procedures of contour plastic surgery and tissue volumization; correction of superficial and medium-deep wrinkles and folds; correction of nasolabial fold and labial fold; filling of the temporal area; volume replenishment in hands; lip volume and lip contour correction; re-creation of philtrum columns; creation of stiffeners; sculptural face correction; bioreinforcement of large areas with signs of gravitational ptosis; filling of deep wrinkles in glabellar area; complex facial rejuvenation. PROPERTY Appearance Peptide complex HA quantification Osmolality ph 7.0 Dynamic Viscosity Residual BDDE Bacterial endotoxin Sterility SPECIFICATIONS Homogeneous, colorless, transparent viscous gel Nonapeptide-18 (CG-Formade) and Oligopeptide-55 (CG-Collagrin) 24 mg/ml (Mw # 3000 kd) 300 mosmol/kg 125 000 CP -2 ppm < 0.25 EU/ml Sterile filling deep wrinkles in the forehead face recontouring nasolabial fold correction of lips (shape, volume. lip line) Product Configuration: Glass prefilled syringe 1.0 ml in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 24
SCULPT PRODUCTS Based on PDRN Polynucleotides - fragments of low molecular DNA - are capable of triggering active regeneration and cell division processes. The Sculpt products with PDRN for injections are made from raw materials of animal origin such as the milt of salmonid fish. The nature of the active substance allows the use of polynucleotides without harmful effects on humans as they do not cause genetic transformations in the body. The only contraindication is possible allergic reaction to seafood. Once Sculpt products with PDRN are used, old cells are replaced with new and synthesis of DNA and RNA molecules starts to occur. This is the main difference between using the Sculpt with PDRN injections and other variants of Sculpt bio-revitalization: they do not try to activate metabolic processes in cells already worn down. Instead, they stimulate the growth of new cells capable of activating the synthesis of substances. New cells contain large amounts of hyaluronic acid and produce considerable quantities of collagen and elastin that help maintain and update the structure of the skin. PDRN is a powerful antioxidant which neutralize free radicals such as 8-OHDG that are known to cause major damage to cell DNA. PDRN also prevents oxidative processes. The main effects of Sculpt injection with PDRN are: Wrinkles of small and medium depth become significantly smoother Aligned relief Recovery of tone and elasticity The effect of refreshed and moisted skin Increase in elasticity Narrowing of pores Whitening effect Improvement of complexion and prevention of age-related changes
Polynucleotide SCULPT POLYNUCLEOTIDE COMPLEX 2.0 The product is designed to correct fine superficial wrinkles and moderate age-related changes. It also reduces skin dryness, removes signs of photoaging or early atopy of the skin and moderate changes in the neck skin and décolletage area. It is also suitable for the correcting skin on the hands. This product is an elastic, sterile, injectable, pyrogen-free, biodegradable gel containing polymerized nucleotides (polydesoxyribonucleotides (PDRN)) in a concentration of 5 mg/ml and has a double effect of polyrevitalization and bioreparation on the skin. The product restart the internal regeneration process of the extracellular matrix and prevent skin aging. Composition/Characteristics: Stabilized hyaluronic acid 8 mg/ml (Mw # 3000 kd); PDRN 5 mg/ml; ph 7.0; Osmolality (mosm/kg) 300; Endotoxin content (EU/ml) <0,50; The residual BDDE -2 ppm. How the product is supplied: 2 ml glass prefilled syringe in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 26
Polynucleotide SCULPT POLYNUCLEOTIDE COMPLEX 3.0 This product is designed for correcting pronounced age related changes in fine-wrinkled type skin. It is also suitable for neck and décolletage reinforcement, correction of pronounced changes in skin of hands, stretch marks and scars as well as prolonging the effect of fillers. This product is an elastic, sterile, injectable, pyrogen-free, biodegradable gel containing polymerized nucleotides (polydesoxyribonucleotides (PDRN)) in a concentration of 10 mg/ml and has a double effect of polyrevitalization and bioreparation on the skin. Recommended for problem skin that is susceptible to aggressive environmental influences. Composition/Characteristics: Stabilized hyaluronic acid 8 mg/ml (Mw # 3000 kd); PDRN 10 mg/ml; ph 7.0; Osmolality (mosm/kg) 300; Endotoxin content (EU/ml) <0,50; The residual BDDE -2 ppm. How the product is supplied: 2 ml glass prefilled syringe in a blister pack with two needles 27G1/2 TSK Laboratory (Japan). Blister is packed in a box. 27
Tel: +972-54-999-1978 Mail: sales@sculptfillers.com www.sculptfillers.com