Revision Date 11/19/2014 Revision 1 SAFETY DATA SHEET 1. IDENTIFICATION Product Name Product No. Identification No. Identified uses Supplier UN3082 Adhesive. Epoxy Technology, Inc. 14 Fortune Drive Billerica, MA 01821 USA www.epotek.com (978) 667-3805 (978) 663-9782 Emergency Telephone (800) 255-3924 2. HAZARD(S) IDENTIFICATION Appearance Color Odor GHS Pictogram Paste White / off-white. Mild. Signal Word Warning Hazard Statements H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. Precautionary Statements P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P313 Get medical advice/attention. P501 Dispose of contents/container in accordance with local regulations. Contains Epoxy Phenol Novolac Reactive Diluent GHS Classification Physical and Chemical Hazards Not classified. Human health Skin Irrit. 2 - H315;Eye Irrit. 2 - H319;Skin Sens. 1 - H317 Environment Aquatic Chronic 2 - H411 Inhalation Inhalation of dusts during cutting, grinding or sanding of this product may cause irritation of the respiratory tract. Ingestion May cause discomfort if swallowed. 1 / 6
Skin Contact May cause sensitization by skin contact. Irritating to skin. Eye Contact Irritating to eyes. 3. COMPOSITION/INFORMATION ON INGREDIENTS Epoxy Phenol Novolac 30-60% CAS No.: 9003-36-5 EC No.: GHS Classification Skin Irrit. 2 - H315; Eye Irrit. 2 - H319; Skin Sens. 1 - H317; Aquatic Chronic 2 - H411 Reactive Diluent 10-30% CAS No.: Proprietary EC No.: Proprietary GHS Classification Acute Tox. 4 - H312; Acute Tox. 4 - H332; Skin Irrit. 2 - H315; Eye Irrit. 2 - H319; Skin Sens. 1 - H317 4. FIRST-AID MEASURES Description of first aid measures Inhalation Move the exposed person to fresh air at once. Rinse nose and mouth with water. Get medical attention if any discomfort continues. Ingestion NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Rinse mouth thoroughly. Get medical attention if any discomfort continues. Skin Contact Remove affected person from source of contamination. Remove contaminated clothing. Wash the skin immediately with soap and water. Get medical attention if any discomfort continues. Eye Contact Remove victim immediately from source of exposure. Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention. Most important symptoms and effects, both acute and delayed Inhalation Inhalation of dusts during cutting, grinding or sanding of this product may cause irritation of the respiratory tract. Ingestion May cause discomfort if swallowed. Skin Contact Skin irritation. Allergic rash. Eye Contact Irritating and may cause redness and pain. Indication of any immediate medical attention and special treatment needed Notes To The Physician Treat Symptomatically. 5. FIRE-FIGHTING MEASURES Flash point ( C) 93 Extinguishing Media Fire can be extinguished using: Dry chemicals. Foam. Carbon dioxide (CO2). 2 / 6
Hazardous combustion products Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors. Special Fire Fighting Procedures Avoid breathing fire vapors. Protective Equipment For Fire-Fighters Self-contained breathing apparatus and full protective clothing must be worn in case of fire. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions Wear protective clothing as described in Section 8 of this material safety data sheet. Environmental Precautions Do not discharge onto the ground or into water courses. Avoid release to the environment. Spill Clean Up Methods Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean spillage area. Do not contaminate water sources or sewer. Reference to other sections For personal protection, see section 8. 7. HANDLING AND STORAGE Handling Avoid spilling, skin and eye contact. Keep away from heat, sparks and open flame. Do not eat, drink or smoke when using the product. Provide good ventilation. Storage Store at -40 degrees C. Keep container tightly sealed when not in use. Bring to room temperature before opening container. Storage Class Chemical storage. Specific end use(s) The identified uses for this product are detailed in Section 1.2. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Protective Equipment Process Conditions Provide eyewash station. Engineering Measures Provide adequate ventilation. Respiratory Equipment If ventilation is insufficient, suitable respiratory protection must be provided. Hand Protection Wear protective gloves. Eye Protection Wear goggles/face shield. Other Protection Wear appropriate clothing to prevent any possibility of skin contact. Hygiene Measures DO NOT SMOKE IN WORK AREA! Wash hands at the end of each work shift and before eating, smoking and using the toilet. Promptly remove any clothing that becomes contaminated. Use appropriate skin cream to prevent drying of skin. When using do not eat, drink or smoke. 3 / 6
9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Paste Color White / off-white. Odor Mild. Solubility Slightly soluble in water. Vapor density (air=1) >1 Evaporation rate <BuAc Flash point ( C) 93 10. STABILITY AND REACTIVITY Reactivity Reaction with: Strong oxidizing agents. Strong reducing agents. Stability Stable under normal temperature conditions. Hazardous Polymerisation Will not occur. Conditions To Avoid Avoid excessive heat for prolonged periods of time. Avoid heat, flames and other sources of ignition. Avoid contact with oxidizers or reducing agents. Materials To Avoid Strong oxidizing substances. Strong reducing agents. Hazardous Decomposition Products In case of fire, toxic gases (CO, CO2, NOx) may be formed. 11. TOXICOLOGICAL INFORMATION Toxicological information No information available. 12. ECOLOGICAL INFORMATION Ecotoxicity Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Acute Fish Toxicity Very toxic to aquatic organisms. Degradability No data available. Bioaccumulative potential No data available on bioaccumulation. Mobility: The product has poor water-solubility. Other adverse effects Not known. 13. DISPOSAL CONSIDERATIONS Disposal Methods Dispose of waste and residues in accordance with local authority requirements. 14. TRANSPORT INFORMATION UN No. (DOT/TDG) UN3082 UN No. (IMDG) 3082 UN No. (ICAO) 3082 DOT Proper Shipping Name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxy Phenol Novolac) 4 / 6
TDG Proper Shipping Name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxy Phenol Novolac) DOT Hazard Class 9 DOT Hazard Label Class 9 TDG Class 9 TDG Label(s) 9 IMDG Class 9 ICAO Class 9 Transport Labels MISCELLANEOUS DANGEROUS GOODS 9 DOT Pack Group IMDG Pack Group Air Pack Group III III III Environmentally Hazardous Substance/Marine Pollutant EMS F-A, S-F 15. REGULATORY INFORMATION US Federal Regulations SARA Section 302 Extremely Hazardous Substances Tier II Threshold Planning Quantities CERCLA/Superfund, Hazardous Substances/Reportable Quantities (EPA) SARA Extremely Hazardous Substances EPCRA Reportable Quantities SARA 313 Emission Reporting CAA Accidental Release Prevention OSHA Highly Hazardous Chemicals US State Regulations California Proposition 65 Carcinogens and Reproductive Toxins California Air Toxics Hot Spots (A-I) 5 / 6
California Air Toxics Hot Spots (A-II) Massachusetts "Right To Know" List Rhode Island "Right To Know" List Minnesota "Right To Know" List New Jersey "Right To Know" List Pennsylvania "Right To Know" List International Inventories EU - EINECS/ELINCS At least one ingredient is not listed. Canada DSL/NDSL US - TSCA US TSCA 12(b) Export Notification Australia - AICS Japan MITI Korea - KECI China - IECSC Philippines PICCS 16. OTHER INFORMATION Revision Date 11/19/2014 Revision 1 Disclaimer Information contained in this publication or as otherwise supplied to Users is believed to be accurate and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for their own particular purpose. Epoxy Technology, Inc. gives no warranty as to the fitness of the product for any particular purpose and any implied warranty or condition (statutory or otherwise) is excluded except to the extent that exclusion is prevented by law. Epoxy Technology, Inc. accepts no liability for loss or damage (other than that arising from death or personal injury caused by defective product, if proved), resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be assumed. 6 / 6