ColorSet Epoxy System 931 - Part A HMIS HEALTH 3 FLAMMABILITY 1 REACTIVITY 0 PERSONAL PROTECTION I 1. Product And Company Identification Supplier Manufacturer C-CURE C-CURE 13001 SEAL BEACH BLVD. 13001 SEAL BEACH BLVD. SEAL BEACH, CA 90740 USA SEAL BEACH, CA 90740 USA Company Contact: GEORGE MARCINA Company Contact: GEORGE MARCINA Telephone Number: 562 968 2980 Ext 103 Telephone Number: 562 968 2980 Ext 103 FAX Number: 562 903 2697 FAX Number: 562 903 2697 E-Ma i l : georgem@cbpmail.net E-Ma il: georgem@cbpmail.net Web Site: WWW.C-CURE.COM Web Site: WWW.C-CURE.COM Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number GEORGE MARCINA: 562 968 2980 Ext 103 GEORGE MARCINA: 562 968 2980 Ext 103 Issue Date: 04/20/2007 Product Name: ColorSet Epoxy System 931 - Part A CAS Number: Not Established Chemical Family: Aminoamid Chemical Formula: MIXTURE MSDS Number: 910 Product Code: 4F7620, et al Product Identification Text This MSDS is applicable to following Colors; # 164 Silver King, # 167 Azalea, # 168 Wild Onion, #173 Honeysuckle, #200 Dover White. 2. Composition/Information On Ingredients Ingredient CAS Percent Of Name Number Total Weight BISPHENOL A 80-05-7 20-30 CARBON BLACK 1333-86-4 0-5 DIETHYLENETRIAMINE 111-40-0 20-30 IRONOXIDEPIGMENTS Not Establish 0-5 SILICA, AMORPHOUS 7631-86-9 1-5 TITANIUMDIOXIDE 13463-67-7 1-5 TETA 112-24-3 20-30 14808-60-7 10-20 3. Hazards Identification Primary Routes(s) Of Entry SKIN, EYES AND NOSE. Page 1 of 6
ColorSet Epoxy System 931 - Part A 3. Hazards Identification - Continued Eye Hazards CORROSIVE TO LIVING TISSUE. WILL CAUSE EYE BURNS. Skin Hazards CORROSIVE TO LIVING TISSUE. SKIN SENSITIZER. WILL CAUSE SKIN BURNS. CAN CAUSE ALLERGIC SKIN REACTIONS. Ingestion Hazards INGESTION MAY CAUSE DIGESTIVE TRACT IRRITATION. SWALLOWING CAN BURN MOUTH AND CAUSE NAUSEA, VOMITTING, DIARRHEA, PAIN AND COLLAPSE. Inhalation Hazards MAY CAUSE IRRITATION OF THE RESPIRATORY TRACT. MAY CAUSE RESPIRATORY REACTION AFTRE REPETITIVE EXPOSURE. Subchronic (Target Organ Effects) ANIMAL STUDIES ON COMPONENTS HAVE SHOWN EFFECTS ON LIVER AND FETUS. Chronic/Carcinogenicity Effects CONTAINS SAND - KNOWN HIMAN CARCINOGEN. Reproductive Effects ANIMAL STUDIES ON COMPONENTS HAVE SHOWN EFFECTS ON LIVER AND FETUS. Conditions Aggravated By Exposure ALERGIC CONDITIONS. 4. First Aid Measures Eye IMMEDIATELY FLUSH WITH RUNNING WATER FOR 15 MIN. HOLD EYELIDS APART TO INSURE RINSING OF ENTIRE EYE SURFACE AND LID WITH WATER. FLUSH FOR ADDITIONAL 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION. Skin IMMEDIATELY WIPE OFF EXCESS MATERIAL WITH A DRY TOWEL. REMOVE CONTAMINATED CLOTHING AND SHOES. WASH AFFECTED AREAS THOROUGHLY WITH LARGE AMOUNTS OF SOAP AND WATER FOR AT LEAST 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION. Ingestion SEEK IMMEDIATE MEDICAL ATTENTION. GIVE 3-4 GLASES OF WATER BUT DO NOT INDUCE VOMITTING. IF VOMITTING OCCURS, GIVE MORE WATER. DO NOT GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. REMOVE STOMACH CONTENTS BY GASTRIC SUCTION OR INDUCE VOMITING ONLY AS DIRECTED BY A PHYSISCIAN. Inhalation MOVE PERSON TO FRESH AIR. SEEK MEDICAL ATTENTION OF RESPIRATORY IRRATITION DEVELOPES OR IF BREATHING BECOMES DIFFICULT. 5. Fire Fighting Measures Flash Point: 233 F Flash Point Method: CLOSED CUP Lower Explosive Limit: N/A Upper Explosive Limit: N/A Fire And Explosion Hazards DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE TOXIC. MAY GENERATE NITROGEN OXIDE GASSES AND AMMONIA GAS. Page 2 of 6
ColorSet Epoxy System 931 - Part A 5. Fire Fighting Measures - Continued Extinguishing Media FOAM, CO2, DRY CHEMICAL, WATER SPRAY. Fire Fighting Instructions USE SELF CONTAINED BREATHING APPARATUS. COMBUSTION OR DECOMPOSITION PRODUCTS MAY BE TOXIC. 6. Accidental Release Measures IN CASE MATERIAL IS RELEASED OR SPILLED, AVOID ALL PERSONAL CONTACT. SOAK UP IN ABSORBENT MATERIAL AND SHOVEL INTO A CLOSABLE CONTAINER. FLUSH AREA WITH WATER SPRAY. AVOID INHALATION OF VAPORS. 7. Handling And Storage Handling And Storage Precautions CAUTION! CAN CAUSE IRRITATION, DERMATITIS AND SENSITIZATION. AVOID CONTACT WITH EYES, SKIN AND CLOTHING. AVOID BREATHING VAPOR, MIST OR SPRAY. USE ONLY IN AREAS WITH GOOD VENTILATION. WASH THOROUGHLY AFTER HANDLING. STORE IN DRY AREAS AWAY FROM HEAT OR OPEN FLAME. Handling Precautions DANGER, CORROSIVE. WILL CAUSE EYE AND SKIN BURNS. CAN CAUSE ALLERGIC REACTIONS. Work/Hygienic Practices PRACTICE CAUTION AND PERSONAL CLEANLINESS TO AVOID SKIN AND EYE CONTACT. AVOID BREATHING VAPORS OF HEATED PRODUCT. 8. Exposure Controls/Personal Protection Engineering Controls USE IN WELL VENTILATED AREAS. Eye/Face Protection WEAR SAFETY GLASSES WITH SIDE SHIELDS. IN EMERGENCY SITUATIONS, USE EYE GOGGLES WITH A FULL FACE SHIELD. Skin Protection WEAR CHEMICAL RESISTANT, PLASTIC OR RUBBER GLOVES. Respiratory Protection NONE REQUIRED UNDER NORMAL CONDITIONS. IF NEEDED, WEAR ORGANIC CHEMICAL CARTRIDGE RESPIRATOR. Other/General Protection WEAR APPROPRIATE CLOTHING TO PREVENT THE POSSIBILITY OF SKIN OR EYE CONTACT. Ingredient(s) - Exposure Limits CARBON BLACK ACGIH TLV-TWA 3.5 mg/m3 OSHA PEL-TWA 3.5 mg/m3 DIETHYLENETRIAMINE ACGIH TLV-TWA 1 ppm (Skin) OSHA PEL 1ppm IRON OXIDE PIGMENTS ACGIH TLV - 5 mg/m3 OSHA STEL - 10 ppm SILICA, AMORPHOUS ACGIH TLV-TWA 10 mg/m3 Page 3 of 6
ColorSet Epoxy System 931 - Part A 8. Exposure Controls/Personal Protection - Continued Ingredient(s) - Exposure Limits - Continued OSHA PEL-TWA 20 mppcf OSHA PEL-TWA 80 / %SiO2 mg/m3 OEHHA REL 3 micrograms/m3 TITANIUM DIOXIDE ACGIH TLV-TWA 10 mg/m3 OSHA PEL-TWA 15 mg/m3 ACGIH TLV-TWA 0.05 mg/m3 OSHA PEL-TWA 30/%SiO2+2mg/m3 OSHA PEL - TWA 10/% SiO2 +2 mg/m3 OSHA PEL-TWA 250/%SiO+5 mppcf Cal EPA - OEHHA - REL - 3 micrograms/m3 WEAR APPROPRIATE CLOTHING TO PREVENT CONTACT WITH SKIN AND EYES. 9. Physical And Chemical Properties Appearance COLORED LIQUID. Odor AMONIACAL. Chemical Type: Mixture Physical State: Liquid Boiling Point: >400 F >200 C Specific Gravity: 1.2 Vapor Pressure: <1 mm Hg @ 20C Vapor Density: N/E ph Factor: 11 Solubi l i ty: SLIGHTLY SOLUBLE IN WATER. Evaporation Rate: N/E 10. Stability And Reactivity Sta bi l i ty: STABLE Hazardous Polymerization: WILL NOT OCCUR. Incompatible Materials MINERAL AND ORGANIC ACIDS, OXIDIZING AGENTS. CAUSTION - NITROSOAMINES, KNOWN CARCINOGENS, MAY BE FORMED IN CONTACT WITH NITROUS ACID, NITRITES, NITROUS OXIDES.. Hazardous Decomposition Products CARBON MONOXIDE, CARBON DIOXIDE, NITROGEN OXIDES, AMMONIA, NITRIC ACID. 11. Toxicological Information Skin Effects DERMAL LD50, = 3.0 G/KG RABBIT (Component) CORROSIVE., SENSITIZER Acute Oral Effects ORAL LD50 = 3.2 G /KG RAT (Component) Chronic/Carcinogenicity CONTAINS SAND - KNOWN CARCINOGEN. Page 4 of 6
ColorSet Epoxy System 931 - Part A 11. Toxicological Information - Continued Ingredient(s) - Carcinogenicity CARBON BLACK Listed In The IARC Monographs SILICA, AMORPHOUS Listed In The IARC Monographs NTP - Listed On The National Toxicology Program Listed In The IARC Monographs 12. Ecological Information No Data Available... 13. Disposal Considerations DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. RCRA Information NOT A HAZARDOUS WASTE UNDER RCRA (40 CFR 261). 14. Transport Information Proper Shipping Name CORROSIVE LIQUIDS N.O.S. (Diethylenetriamine, Triethylenetetramine) Hazard Class 8 DOT Identification Number UN1760 Packaging Requirements PACKAGING GROUP III Additional Shipping Paper Description ID NUMBER - UN 1760 15. Regulatory Information U.S. Regulatory Information CONTAINS CHEMICAL WHICH IS REGULATED BY TSCA AND PROPER EXPORT NOTIFICATION SHALL BE SENT TO EPA PRIOR TO SHIPPING OUT OF US. NAME: 80-05-7, 4.4'-ISOPROPYL IDENEPHENOL SARA Section 313 Notification CONTAINS A TOXIC CHEMICAL FOR ROUTINE ANNUAL TOXIC RELEASE REPORTING - 80-05-7, 4.4'-ISOPROPYL IDENEPHENOL Ingredient(s) - U.S. Regulatory Information SARA Title III - Section 313 Form "R"/TRI Reportable Chemical SARA - Chronic Health Hazard State Regulations Ingredient(s) - State Regulations CARBON BLACK Page 5 of 6
ColorSet Epoxy System 931 - Part A 15. Regulatory Information - Continued Ingredient(s) - State Regulations - Continued DIETHYLENETRIAMINE New Jersey - Special Hazard New York City - Hazardous Substance SILICA, AMORPHOUS TITANIUM DIOXIDE New York City - Hazardous Substance TETA New Jersey - Special Hazard New York City - Hazardous Substance California - Proposition 65 16. Other Information HMIS Rating He a lth: 3 Fire : 1 Re a cti vi ty: 0 Personal Protection: I Revision/Preparer Information MSDS Preparer: GEORGE MARCINA MSDS Preparer Phone Number: (323) 582-0846 This MSDS Supersedes A Previous MSDS Dated: 04/20/2007 Disclaimer THE INFORMATIION PRESENTED HERE IS BELIEVED TO BE ACCURATE BUT IS NOT WARRANTED TO BE, WHETHER ORIGINATING WITH THE COMPANY OR NOT. RECIPIENTS ARE ADVISED TO CONFIRM IN ADVANCE OF NEED, THAT THE INFORMATION IS CURRENT APPLICALBE, AND SUITABLE TO THEIR CIRCUSTANCES. C-CURE Printed Using MSDS Generator 2000 Page 6 of 6
ColorSet Epoxy System 931 - Part A, Neutral HMIS HEALTH 3 FLAMMABILITY 1 REACTIVITY 0 PERSONAL PROTECTION I 1. Product And Company Identification Supplier Manufacturer C-CURE C-CURE 13001 SEAL BEACH BLVD. 13001 SEAL BEACH BLVD. SEAL BEACH, CA 90740 USA SEAL BEACH, CA 90740 USA Company Contact: GEORGE MARCINA Company Contact: GEORGE MARCINA Telephone Number: 562 968 2980 Ext 103 Telephone Number: 562 968 2980 Ext 103 FAX Number: 562 903 2697 FAX Number: 562 903 2697 E-Ma i l : georgem@cbpmail.net E-Ma il: georgem@cbpmail.net Web Site: WWW.C-CURE.COM Web Site: WWW.C-CURE.COM Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number GEORGE MARCINA: 562 968 2980 Ext 103 GEORGE MARCINA: 562 968 2980 Ext 103 Issue Date: 04/20/2007 Product Name: ColorSet Epoxy System 931 - Part A, Neutral CAS Number: Not Established Chemical Family: Aminoamid Chemical Formula: MIXTURE MSDS Number: 911 Product Code: 4F7639 Product Identification Text This MSDS is applicable to following Colors; Neutral, # 166 Wild Ginger and #170 Blue Bonnet 2. Composition/Information On Ingredients Ingredient CAS Percent Of Name Number Total Weight BISPHENOL A 80-05-7 20-30 DIETHYLENETRIAMINE 111-40-0 20-30 SILICA, AMORPHOUS 7631-86-9 1-5 TETA 112-24-3 20-30 14808-60-7 10-20 3. Hazards Identification Primary Routes(s) Of Entry SKIN, EYES AND NOSE. Eye Hazards CORROSIVE TO LIVING TISSUE. WILL CAUSE EYE BURNS. Skin Hazards CORROSIVE TO LIVING TISSUE. SKIN SENSITIZER. WILL CAUSE SKIN BURNS. CAN CAUSE ALLERGIC SKIN Page 1 of 6
ColorSet Epoxy System 931 - Part A, Neutral 3. Hazards Identification - Continued Skin Hazards - Continued REACTIONS. Ingestion Hazards INGESTION MAY CAUSE DIGESTIVE TRACT IRRITATION. SWALLOWING CAN BURN MOUTH AND CAUSE NAUSEA, VOMITTING, DIARRHEA, PAIN AND COLLAPSE. Inhalation Hazards MAY CAUSE IRRITATION OF THE RESPIRATORY TRACT. MAY CAUSE RESPIRATORY REACTION AFTRE REPETITIVE EXPOSURE. Subchronic (Target Organ Effects) ANIMAL STUDIES ON COMPONENTS HAVE SHOWN EFFECTS ON LIVER AND FETUS. Chronic/Carcinogenicity Effects CONTAINS SAND - KNOWN HIMAN CARCINOGEN. Reproductive Effects ANIMAL STUDIES ON COMPONENTS HAVE SHOWN EFFECTS ON LIVER AND FETUS. Conditions Aggravated By Exposure ALERGIC CONDITIONS. 4. First Aid Measures Eye IMMEDIATELY FLUSH WITH RUNNING WATER FOR 15 MIN. HOLD EYELIDS APART TO INSURE RINSING OF ENTIRE EYE SURFACE AND LID WITH WATER. FLUSH FOR ADDITIONAL 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION. Skin IMMEDIATELY WIPE OFF EXCESS MATERIAL WITH A DRY TOWEL. REMOVE CONTAMINATED CLOTHING AND SHOES. WASH AFFECTED AREAS THOROUGHLY WITH LARGE AMOUNTS OF SOAP AND WATER FOR AT LEAST 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION. Ingestion SEEK IMMEDIATE MEDICAL ATTENTION. GIVE 3-4 GLASES OF WATER BUT DO NOT INDUCE VOMITTING. IF VOMITTING OCCURS, GIVE MORE WATER. DO NOT GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. REMOVE STOMACH CONTENTS BY GASTRIC SUCTION OR INDUCE VOMITING ONLY AS DIRECTED BY A PHYSISCIAN. Inhalation MOVE PERSON TO FRESH AIR. SEEK MEDICAL ATTENTION OF RESPIRATORY IRRATITION DEVELOPES OR IF BREATHING BECOMES DIFFICULT. 5. Fire Fighting Measures Flash Point: 233 F Flash Point Method: CLOSED CUP Lower Explosive Limit: N/A Upper Explosive Limit: N/A Fire And Explosion Hazards DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE TOXIC. MAY GENERATE NITROGEN OXIDE GASSES AND AMMONIA GAS. Extinguishing Media FOAM, CO2, DRY CHEMICAL, WATER SPRAY. Page 2 of 6
ColorSet Epoxy System 931 - Part A, Neutral 5. Fire Fighting Measures - Continued Fire Fighting Instructions USE SELF CONTAINED BREATHING APPARATUS. COMBUSTION OR DECOMPOSITION PRODUCTS MAY BE TOXIC. 6. Accidental Release Measures IN CASE MATERIAL IS RELEASED OR SPILLED, AVOID ALL PERSONAL CONTACT. SOAK UP IN ABSORBENT MATERIAL AND SHOVEL INTO A CLOSABLE CONTAINER. FLUSH AREA WITH WATER SPRAY. AVOID INHALATION OF VAPORS. 7. Handling And Storage Handling And Storage Precautions CAUTION! CAN CAUSE IRRITATION, DERMATITIS AND SENSITIZATION. AVOID CONTACT WITH EYES, SKIN AND CLOTHING. AVOID BREATHING VAPOR, MIST OR SPRAY. USE ONLY IN AREAS WITH GOOD VENTILATION. WASH THOROUGHLY AFTER HANDLING. STORE IN DRY AREAS AWAY FROM HEAT OR OPEN FLAME. Handling Precautions DANGER, CORROSIVE. WILL CAUSE EYE AND SKIN BURNS. CAN CAUSE ALLERGIC REACTIONS. Work/Hygienic Practices PRACTICE CAUTION AND PERSONAL CLEANLINESS TO AVOID SKIN AND EYE CONTACT. AVOID BREATHING VAPORS OF HEATED PRODUCT. 8. Exposure Controls/Personal Protection Engineering Controls USE IN WELL VENTILATED AREAS. Eye/Face Protection WEAR SAFETY GLASSES WITH SIDE SHIELDS. IN EMERGENCY SITUATIONS, USE EYE GOGGLES WITH A FULL FACE SHIELD. Skin Protection WEAR CHEMICAL RESISTANT, PLASTIC OR RUBBER GLOVES. Respiratory Protection NONE REQUIRED UNDER NORMAL CONDITIONS. IF NEEDED, WEAR ORGANIC CHEMICAL CARTRIDGE RESPIRATOR. Other/General Protection WEAR APPROPRIATE CLOTHING TO PREVENT THE POSSIBILITY OF SKIN OR EYE CONTACT. Ingredient(s) - Exposure Limits DIETHYLENETRIAMINE ACGIH TLV-TWA 1 ppm (Skin) OSHA PEL 1ppm SILICA, AMORPHOUS ACGIH TLV-TWA 10 mg/m3 OSHA PEL-TWA 20 mppcf OSHA PEL-TWA 80 / %SiO2 mg/m3 OEHHA REL 3 micrograms/m3 ACGIH TLV-TWA 0.05 mg/m3 OSHA PEL-TWA 30/%SiO2+2mg/m3 OSHA PEL - TWA 10/% SiO2 +2 mg/m3 OSHA PEL-TWA 250/%SiO+5 mppcf Page 3 of 6
ColorSet Epoxy System 931 - Part A, Neutral 8. Exposure Controls/Personal Protection - Continued Ingredient(s) - Exposure Limits - Continued Cal EPA - OEHHA - REL - 3 micrograms/m3 WEAR APPROPRIATE CLOTHING TO PREVENT CONTACT WITH SKIN AND EYES. 9. Physical And Chemical Properties Appearance AMBER LIQUID. Odor AMONIACAL. Chemical Type: Mixture Physical State: Liquid Boiling Point: >400 F >200 C Specific Gravity: 1.2 Vapor Pressure: <1 mm Hg @ 20C Vapor Density: N/E ph Factor: 11 Solubi l i ty: SLIGHTLY SOLUBLE IN WATER. Evaporation Rate: N/E 10. Stability And Reactivity Sta bi l i ty: STABLE Hazardous Polymerization: WILL NOT OCCUR. Incompatible Materials MINERAL AND ORGANIC ACIDS, OXIDIZING AGENTS. CAUSTION - NITROSOAMINES, KNOWN CARCINOGENS, MAY BE FORMED IN CONTACT WITH NITROUS ACID, NITRITES, NITROUS OXIDES.. Hazardous Decomposition Products CARBON MONOXIDE, CARBON DIOXIDE, NITROGEN OXIDES, AMMONIA, NITRIC ACID. 11. Toxicological Information Skin Effects DERMAL LD50, = 3.0 G/KG RABBIT (Component) CORROSIVE., SENSITIZER Acute Oral Effects ORAL LD50 = 3.2 G /KG RAT (Component) Chronic/Carcinogenicity CONTAINS SAND - KNOWN CARCINOGEN. Ingredient(s) - Carcinogenicity SILICA, AMORPHOUS Listed In The IARC Monographs NTP - Listed On The National Toxicology Program Listed In The IARC Monographs 12. Ecological Information No Data Available... Page 4 of 6
ColorSet Epoxy System 931 - Part A, Neutral 13. Disposal Considerations DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. RCRA Information NOT A HAZARDOUS WASTE UNDER RCRA (40 CFR 261). 14. Transport Information Proper Shipping Name CORROSIVE LIQUIDS N.O.S. (Diethylenetriamine, Triethylenetetramine) Hazard Class 8 DOT Identification Number UN1760 Packaging Requirements PACKAGING GROUP III Additional Shipping Paper Description ID NUMBER - UN 1760 15. Regulatory Information U.S. Regulatory Information CONTAINS CHEMICAL WHICH IS REGULATED BY TSCA AND PROPER EXPORT NOTIFICATION SHALL BE SENT TO EPA PRIOR TO SHIPPING OUT OF US. NAME: 80-05-7, 4.4'-ISOPROPYL IDENEPHENOL SARA Section 313 Notification CONTAINS A TOXIC CHEMICAL FOR ROUTINE ANNUAL TOXIC RELEASE REPORTING - 80-05-7, 4.4'-ISOPROPYL IDENEPHENOL Ingredient(s) - U.S. Regulatory Information SARA Title III - Section 313 Form "R"/TRI Reportable Chemical SARA - Chronic Health Hazard State Regulations Ingredient(s) - State Regulations DIETHYLENETRIAMINE New Jersey - Special Hazard New York City - Hazardous Substance SILICA, AMORPHOUS TETA New Jersey - Special Hazard Page 5 of 6
ColorSet Epoxy System 931 - Part A, Neutral 15. Regulatory Information - Continued Ingredient(s) - State Regulations - Continued New York City - Hazardous Substance California - Proposition 65 16. Other Information HMIS Rating He a lth: 3 Fire : 1 Re a cti vi ty: 0 Personal Protection: I Revision/Preparer Information MSDS Preparer: GEORGE MARCINA MSDS Preparer Phone Number: (323) 582-0846 This MSDS Supersedes A Previous MSDS Dated: 04/20/2007 Disclaimer THE INFORMATIION PRESENTED HERE IS BELIEVED TO BE ACCURATE BUT IS NOT WARRANTED TO BE, WHETHER ORIGINATING WITH THE COMPANY OR NOT. RECIPIENTS ARE ADVISED TO CONFIRM IN ADVANCE OF NEED, THAT THE INFORMATION IS CURRENT APPLICALBE, AND SUITABLE TO THEIR CIRCUSTANCES. C-CURE Printed Using MSDS Generator 2000 Page 6 of 6
REF#:A24B ================================================================= MANUFACTURER: C-Cure 13001 Seal Beach Blvd. Seal Beach, CA 90740 Emergency Phone: 562 598 8808 Contact: Steve Taylor ================================================================= SECTION I ================================================================= IDENTITY: COLORSET 931 EPOXY PART B REF# A24B ================================================================= SECTION II - Hazardous Ingredients/Identity Information Hazardous Components: Reaction products of Epichlorohydrin & Bisphenol A. (CAS 25068-38-6) OSHA PEL: ND ACGIH TLV: ND Hazardous Components: Silica Sand (CAS 01-4808-60-7) OSHA PEL: 5mg/m3 (Respirable); 0.3mg/m3 (Total Dust) ACGIH TLV: 0.05mg/m3 (Respirable Dust) ================================================================= SECTION III - Physical/Chemical Characteristics Boiling Point: NA Specific Gravity: 0.93 Vapor Pressure: NA Melting Point: Liquid Vapor Density: NA Evaporation Rate: NA Solubility in Water: None Appearance and Odor: Grayish white viscous liquid/ faint odor. ================================================================= SECTION IV - Fire and Explosion Hazard Data Flash Point: 485F, pmcc Flammable Limits: NA Extinguishing Media: Foam, Carbon Dioxide, Dry Chemical Special Fire Fighting Procedures: Use self contained breathing apparatus. Unusual Fire and Explosion Hazards: Container can rupture if heat is excessive. Burning will produce fumes of Carbon Dioxide & Carbon Monoxide. ======================================================================= SECTION V - Reactivity Data Stability - Stable Incompatibility - Bases Hazardous Decomposition or byproducts-carbon monoxide, Carbon Dioxide Hazardous Polymerization - Will Not Occur By it self. Masses of more than 1 lb. when contaminated with amines will cause irreversible polymerization with considerable heat build up. ======================================================================= SECTION VI - Health Hazard Data Primary Routes of Entry: Inhalation - NO Skin - YES Ingestion - NO Health Hazards: Acute: May cause temporary eye irritation upon contact. Prolonged exposure to skin may cause skin irritation. Single dose oral toxicity low (LD50 rats is >4000mg/leg) Chronic: Skin sensitivity over repeated exposure. Carcinogenicity: NTP - Yes IARC Monographs - No OSHA Regulated - No Signs and symptoms of exposure: Reddening of eyes & skin. Medical Conditions Aggravated by Exposure: May cause allergic skin
REF#:A24B reaction in susceptible individuals. Emergency and First Aid procedures: Eyes: Irrigate immediately with water for at least 15 min. Skin: Wash off in flowing water. Ingestion: No adverse effects anticipated by this route of exposure, incidental to proper handling. ======================================================================= SECTION VII - Precautions for Safe Handling and Use Released or Spilled: Soak up in absorbent material such as sand & collect in a suitable container. Residual resin may be moved using steam or hot soapy water. Keep spark producing equipment away. Waste Disposal Method: Burn in adequate incinerator or burn in an approved landfill. Precautions to be taken in handling and storing: Store in cool dry place. Avoid heating container above 200 F. ======================================================================= SECTION VIII - Control Measures Respiratory Protection: No respiratory protection should be needed. Ventilation: Local exhaust- YES Mechanical- N/A Special- N/A Other - N/A Protective Gloves: Rubber recommended Eye Protection: Tight fitting goggles in busy area. Other Protective Clothing: Barrier cream, boots & clothing should protect skin from contamination. Work/Hygienic Practices: Practice good caution & personal cleanliness. Avoid skin and eye contact. NA=NOT APPLICABLE ND=NOT DETERMINED F=FAHRENHEIT DATE REVISED: 4/08/04 Disclaimer The information presented is believed to be accurate but is not warranted to be. Whether originating with the company or not. Recipients are advised to confirm in advance of need, that the information is current, applicable and suitable to their circumstance.