MATERIAL SAFETY DATA SHEET LEVEL-RIGHT WEARTOP

Similar documents
DHL Injection Mortar SDS

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet Ready Mix Concrete, Freshly Mixed Unhardened Concrete

: DIAMOND-PLATE - 50 LB BAG

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET


M A T E R I A L S A F E T Y D A T A

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET MSDS

ACGIH TLV mg/m3. OSHA PEL mg/m3

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET ANTI-BORAX No. 2 DATE REVISED: January 1, 2016

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet Pre-Mixed Stucco Patch Akona Manufacturing LLC. Version 1.1

Material Safety Data Sheet GFRC (Glass Fiber Reinforced Concrete)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE

MATERIAL SAFETY DATA SHEET

Chemical Name: Cleanser with Chlorinol. Manufacturer: Comet. Container Size: 21 oz. Location: VLA. Disposal: Place empty container in trash.

MATERIAL SAFETY DATA SHEET

7/23/14 SAFETY DATA SHEET. 14 Airport Park Road East Granby, Connecticut U.S.A. SECTION I - PRODUCT IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

J. B. Jewitt Co., Inc. Homestead Finishing Products 1935 West 96 th Street Unit Q Cleveland OH Telephone: (216)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE. (wt.)

SAFETY DATA SHEET Page 1 of 5

MATERIAL SAFETY DATA SHEET

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

PREPARE DATE : 09/24/2001 GENERAL INFORMATION: REVISION NO. : 0 DAP INC. : DAP-TIPS ( ) REVISION DATE: 09/24/2001

SAFETY DATA SHEET SUPERIOR NO. 461 DATE REVISED: January 1, 2016

Safety Data Sheet TREO - Vitreous Silicate Needled Blanket Insulation

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

BREWER SCIENCE INC. MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION 1 - CHEMICAL PRODUCTS & COMPANY IDENTIFICATION

PREPARE DATE : 09/02/1997 GENERAL INFORMATION: REVISION NO. : 8 DAP INC. : DAP-TIPS ( ) REVISION DATE: 12/23/1999

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet MSDS No: GB Page 1 of 5 ProForm BRAND Fiberglass Mesh Tape Date: December 27, 2010

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet WARNING

MATERIAL SAFETY DATA SHEET Gougeon Brothers, Inc.

MATERIAL SAFETY DATA SHEET

Section 1: Product Identification Product Type: Wet concrete. Section 2: Hazard Identification

SAFETY DATA SHEET Page 1 of 5

Safety Data Sheet AQUAOX CLEANER 122

Safety Data Sheet PERINEAL COLD PACKS

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

Talc (magnesium silicate) Product Code: EX-TA0030 Department: inert pigments & fillers C.A.S.: , , ,

SAFETY DATA SHEET SUPERIOR PREFLUX NICKEL CLEANER DATE REVISED: January 1, 2016

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SUPERIOR NO. 650 DATE REVISED: January 1, 2016

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

: Exterior Stucco Finish

* HMIS Rating: Health- 1 Flammability- 1 Reactivity- 0 PPE- X

Z250 Z250 GREEN COLORING COMPOUND. CHEMICAL PRODUCT and COMPANY IDENTIFICATION

Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR

MATERIAL SAFETY DATA SHEET JAMO Waterproof Waterproofing Membrane

Material Safety Data Sheet

Safety Data Sheet 1 PRODUCT IDENTIFICATION

SAFETY DATA SHEET FILE NO.: 106 SDS DATE: August 24, 2018

FILE NO.: DZEC04 NAME OF PRODUCT GlycoZoo Otic Cleanser DATE: 2/2/2018 INGREDIENT: CAS NO. % WT SARA 313 REPORTABLE

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MSDS. Omni Filter Aid

: NEWAGE POWER CLEANER CONCENTRATE

MATERIAL SAFETY DATA SHEET

Surface Preparation or Protection

SOFTSOAP SHEA BUTTER / ALMOND & PLURONIC LIQUID HAND SOAP

SAFETY DATA SHEET. SECTION I - Product and Company Identification. SECTION II - Hazard Identification. GHS Label Elements: Pictograms: N/A

MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1 PRODUCT IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Thin to thick, rigid laminate sheets, various thicknesses/colors. No significant odor.

SAFETY DATA SHEET. Tip Tinner (Sn42/Bi58) MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc.

1 PRODUCT AND COMPANY IDENTIFICATION 2 HAZARD(S) IDENTIFICATION SAFETY DATA SHEET GHS CLASSIFICATION

Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR

MATERIAL SAFETY DATA SHEET

Transcription:

Page 1 of 6 Maxxon Corporation 920 Hamel Road, PO Box 253 Issue date: January, 2006 Hamel, MN 55340 Revision date: June 2013 SECTION 1 PRODUCT IDENTIFICATION Product Name Level-Right WearTop Chemical Emergency or information, call: Maxxon Corporation 763-478-9600 (Q.A. Dept.) or Chem-Trec at 1-800-424-9300 SECTION 2 HAZARDOUS INGREDIENTS Component CAS Number OSHA ACGIH TLV TWA Quartz (respirable dust) 14808-60-7.01 mg/m³ 0.1 mg/m³ Portland Cement 65997-15-1 (respirable dust) 5 mg/m³ (total dust) 10 mg/m³ 10 mg/m³ Limestone 1317-65-3 (respirable dust) 5 mg/m³ (total dust) 15 mg/m³ 10 mg/m³ Odor Vapor Density Physical State Solid (powder) Boiling Point >1000 ºC Melting Point >1500 ºC ph (in water) 11 to 13 Solubility in Water Slightly soluble Specific Gravity (H²O=1) 2.1 Vapor Pressure Evaporation Rate SECTION 3 PHYSICAL DATA

. Page 2 of 6 Maxxon Corporation 920 Hamel Road, PO Box 253 Issue date: January, 2006 Hamel, MN 55340 Revision date: June 2013 SECTION 4 FIRE AND EXPLOSION DATA Flash point and method: Lower explosive limit: Upper explosive limit: Hazardous combustion products: Unusual fire and explosion hazards: Auto ignition temperature: Extinguishing media: Special fire fighting procedures: Not combustible Not combustible SECTION 5 REACTIVITY DATA Stability: Conditions to avoid: Hazardous polymerization: Hazardous Decomposition: Incompatibility: Stable Unintentional contact with water Will not occur Will not spontaneously occur Adding water produces (caustic) calcium hydroxide. Product mixed with water is alkaline. Alkaline materials are incompatible with acids, ammonium salts and phosphorous. SECTION 6 HEALTH HAZARD DATA Emergency Overview This product poses little immediate hazard. A single short term exposure to the dry powder is not likely to cause serious harm. However, exposure of sufficient duration to cementitious products can cause serious, potentially irreversible tissue (skin or eye) destruction in the form of chemical (caustic) burns. The same type of tissue destruction can occur if wet or moist areas of the body are exposed for sufficient duration to dry cement. Routes of exposure: Eye contact, skin contact, inhalation, and ingestion.

Page 3 of 6 Potential health effects Eyes: Exposure to airborne dust may cause immediate or delayed irritation or inflammation. Eye contact by dry powder or splashes of wet product may cause effects ranging from moderate eye irritation to chemical burns and blindness. In case of such exposures, seek immediate first aid (see section VII) and/or medical attention. Skin Contact: Exposure to dry product may cause drying of the skin with consequent mild irritation. Dry cement contacting wet skin or exposure to moist or wet cement may cause more severe skin effects including thickening, cracking or fissuring of the skin. Prolonged exposure can cause severe skin damage in the form of (caustic) chemical burns. Minimize skin contact, particularly contact with wet cement. Exposed persons may not feel discomfort until hours after the exposure has ended and significant injury has occurred. Some individuals may exhibit an allergic response upon exposure to this product. Inhalation: This product contains significant amounts of crystalline silica. A small portion of this crystalline silica is in the form of crystalline free silica. Prolonged exposure to respirable free silica can aggravate other lung conditions and cause silicosis, a disabling and potentially fatal lung disease. (See Carcinogenic Potential ). NOTE: Exposure to this product may cause irritation to the moist mucous membranes of the nose, throat and other respiratory systems. Ingestion: Although small quantities of dust are not known to be harmful, ill effects are possible if larger quantities are consumed. This product should not be eaten. Carcinogenic Potential: This product contains components which are listed as carcinogens. Crystalline silica is now classified by IARC as a known human carcinogen (group 1). NTP has characterized respirable silica as reasonably anticipated to be a carcinogen. Medical Conditions Aggravated By Exposure: Preexisting upper respiratory and lung diseases. SECTION 7 FIRST AID Eye Contact Immediately flush eyes thoroughly with water. Continue flushing eye for at least 15 minutes, including under lids, to remove all particles. Call a physician immediately. Skin Contact Wash skin with cool water and ph-neutral soap or a mild detergent. Seek medical treatment in all cases of prolonged exposure to wet cement, or wet skin exposed to dry cement. Inhalation Ingestion Remove to fresh air. Seek medical help if coughing and/or other symptoms do not subside. Do not induce vomiting. If conscious, have victim drink plenty of water and call a physician immediately.

Page 4 of 6 SECTION 8 EXPOSURE CONTROL/PERSON PROTECTION Eye/Face Protection Skin Protection Where potentially subject to splashed or puffs of cement, wear safety glasses with side shields or goggles. In extremely dusty environments, wear unvented or indirectly vented goggles to avoid eye irritation or injury. Contact lenses should not be worn when working with this product. Prevention is essential to avoid potentially severe skin injury. Avoid contact with unhardened product. If contact occurs, promptly wash affected area with soap and water. Where prolonged exposure to unhardened cement products might occur, wear impervious clothing and gloves to eliminate skin contact. Where required, wear sturdy boots that are impervious to water to eliminate foot and ankle exposure. Do not rely on barrier creams. Barrier creams should not be used in place of gloves. Periodically wash areas contacted by dry cement or by wet cement or concrete fluids with a ph neutral soap. Wash again at the end of work. If irritation occurs, immediately wash the effected area and seek medical treatment. If clothing becomes saturated with wet cement, it should be removed and replaced with clean, dry clothing. Respiratory Protection Avoid actions that cause dust to become airborne. DO NOT SAW OR GRIND SET MATERIAL WITHOUT PROPER RESPIRATORY PROTECTIONS. GRINDING AND SAWING COULD CAUSE SIGNIFICANT AMOUNTS OF FREE SILICA TO BE RELEASED. Use local or general ventilation to control exposures below applicable exposure limits. Use NIOSH approved respirators in poorly ventilated areas, if an applicable exposure limit is exceeded, or when dust causes discomfort or irritation. SECTION 9 SPILL, LEAK AND DISPOSAL PROCEDURES For spills use broom or vacuum to pick up spill. Be careful to avoid creating dust. Place material in suitable container for reclamation or disposal. Dispose of waste material according to local, state and federal regulations. Dispose of bags in an approved landfill or incinerator. SECTION 10 HANDLING AND STORAGE This material should be kept dry. Rotate stock to avoid possible shelf life problems.

. Page 5 of 6 SECTION 11 REGULATORY INFORMATION OSHA Hazard Communications Rule, CFR 1910.1200: This product contains components which are considered hazardous chemicals under this regulation, and should be part of any hazard communication program. CER CLA/Superfund, 40 CFR 117 and 302: Not listed SARA (Title III), Section 311 and 312: This product contains components qualified as a hazardous substance with delayed health effects. SARA (Title III), Section 313: Not subject to reporting requirements under Section 313. Toxic Substances Control Act: Some substances in this product are on the TSCA inventory list. California Proposition 65: CRYSTALLINE SILICA (CAS 14808-60-7) is considered to be a carcinogen by the State of California. WHMIS System: This product contains substances considered to be hazardous by health Canada and is a controlled product. Consult local authorities for acceptable exposure limits. WHMIS Information: 613-957- 2342. SECTION 12 ECOLOGICAL INFORMATION Ecotoxicity: No recognized unusual toxicity to plants or animals. SECTION 13 TRANSPORTATION DATA DOT or TDG shipping Identification Number Hazard Class Required Label Text Not a hazardous material SECTION 14 OTHER INFORMATION Abbreviations CAS No OSHA PEL ACGIH TLV TWA Chemical Abstract Service number Occupational Safety and Health Administration Permissible Exposure Limit American Conference of Government Industrial Hygienists Threshold Limit Value Time Weighted Average (8 hour)

. Page 6 of 6 CL Ceiling Limit mg/m³ Milligrams per Cubic Meter IARC International Agency for Research on Cancer NIOSH National Institute for Occupational Safety and Health ph Negative log of hydrogen ion > Greater than DOT Department of Transportation TDG Transportation of Dangerous Goods CFR Code of Federal Regulations CERCLA Comprehensive Environmental Response, Compensation and Liability Act SARA Superfund Amendments and Reauthorization Act WHMIS Workplace Hazardous Material Information System