CHURCH & DWIGHT CO., INC.

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Pronto Plus Lice Egg Remover Pronto Plus Lice Killing Shampoo Pronto Plus Household Spray Kills Lice

CHURCH & DWIGHT CO., INC.

MATERIAL SAFETY DATA SHEET

BREWER SCIENCE INC. MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET KRC-7 CARPET Cleaner & Stain Remover SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Material Safety Data Sheet

J. B. Jewitt Co., Inc. Homestead Finishing Products 1935 West 96 th Street Unit Q Cleveland OH Telephone: (216)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET SECTION 1 - PRODUCT INFORMATION SUPERPLASTICIZER SECTION 2 - HAZARD IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A

SAFETY DATA SHEET SDS 0192

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Sodium Carbonate Solutions. Section 1 - Chemical Product and Company Identification

Hydroblok Joint Sealant Sealant CHEMTREC: (800)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Signature Home Bleach Regular Scent

MATERIAL SAFETY DATA SHEET

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE

MATERIAL SAFETY DATA SHEET

*MATERIAL SAFETY DATA SHEET*

SAFETY DATA SHEET Page 1 of 5

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Home Sense Bleach Original

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

Material Safety Data Sheet Bromocresol Purple, Sodium Salt. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Magnesium Sulfate, 2.25%, APHA. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET (According to ANSI Z )

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Bedbug Killer Spray Last Updated November 11, 2010

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Zinc, Granular. Section 1 - Chemical Product and Company Identification

24 Hour Emergency Response Information Underground Technologies LLC CHEMTREC: (800) UGT Phone: (248) UGTContact: David Wahl

MATERIAL SAFETY DATA SHEET

FANTASTIK ALL PURPOSE CLEANER WITH BLEACH

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET TSE tube (150g)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Ingredient CAS No. % By Wt. OSHA ACGIH NIOSH NIOSH IDLH Hydrochloric % ppm ppm (7.6 mg/m3)

1 PRODUCT AND COMPANY IDENTIFICATION 2 HAZARD(S) IDENTIFICATION SAFETY DATA SHEET GHS CLASSIFICATION

Material Safety Data Sheet Carbon Standard, 1000 ppm, Inorganic. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET MSDS

Material Safety Data Sheet Bromocresol Green-Methyl Red, APHA. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET MSDS. Omni Filter Aid

MATERIAL SAFETY DATA SHEET (According to ANSI Z ) PRODUCT NAME: QX-5 Blue: Direct Emulsion

Material Safety Data Sheet Potassium Chloride Solutions. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET ANTI-BORAX No. 2 DATE REVISED: January 1, 2016

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet DSC Products Inc. SDS#: 2236B Date Revised: 06/01/2015

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE

MATERIAL SAFETY DATA SHEET

Safety Data Sheet (OSHA 29 CFR ) Section 1 - Product and Company Identification

SAFETY DATA SHEET 1 of 5

MATERIAL SAFETY DATA SHEET MSDS

Material Safety Data Sheet Nitrate-Nitrogen Standard, 1000ppm. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET. Ammonium Oxalate Solution Manufacture of other chemical products, professional, sc ientific, and technical activities. None known.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Hydrogen Peroxide, 2-3% w/w. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET. Tip Tinner (Sn42/Bi58) MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc.

MATERIAL SAFETY DATA SHEET MSDS

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

M A T E R I A L S A F E T Y D A T A

Mean Green Industrial Strength Cleaner & Degreaser Issue Date: April

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Piranha Cut 225

Integrity Composites Material Safety Data Sheet MSDS # MSDS Date: June 2012

M A T E R I A L S A F E T Y D A T A S H E E T

Transcription:

MSDS NUMBER: MSDS-1605 ISSUE DATE: 3/12/07 PAGE 1 OF 5 1. PRODUCT AND COMPANY IDENTIFICATION Church & Dwight Co., Inc. 469 N. Harrison Street Product Names Princeton, NJ 08540 OxiClean Versatile Stain Remover Emergency Phone: 1-800-424-9300 Medical Emergency Phone: 1-888-234-1828 Product Use: Cleaning product used as Laundry Booster, Customer Service Carpet Spot Remover and Hard Surface Cleaner 1-800-781-7529 2. COMPOSITION/INFORMATION ON INGREDIENTS CAS Number Chemical Ingredients % By Wt. 0497-19-8 Sodium carbonate 55-65% 15630-89-4 Sodium carbonate Peroxyhydrate 30-40% 68002-97-1 Ethoxylated Alcohol C12-C16 2-4% 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW White powder with blue specks. Eye irritant. May cause burning and redness. May cause skin irritation. Can react with alkaline materials or metals. Can emit toxic fumes if mixed with products containing chlorine or other sanitizing ingredients. Not a fire hazard. This product is labeled in accordance with regulations administered by the Consumer Product Safety Commission (CPSC). However, the use pattern and exposure in the workplace are generally not consistent with those experienced by consumers. Protective measures, with the exception of those indicated on the label, are not normally necessary. Therefore, the requirements of the Occupational Safety and Health Administration applicable to this MSDS differ from the labeling requirements of the CPSC, and this MSDS may contain additional health hazard information not pertinent to consumer use and not found on the product label; such as appropriate protective measures to prevent eye and prolonged skin contact (glasses, goggles, rubber gloves, protective clothing) and minimize inhalation exposure (engineering controls, NIOSH-approved respiratory

MSDS NUMBER: MSDS-1605 ISSUE DATE: 3/12/07 PAGE 2 OF 5 protection appropriate for the hazard presented) are recommended. HMIS Rating Health 1 Fire 0 Reactivity 0 Potential Health Effects Primary Route(s) of Entry: Eyes, skin contact, inhalation, ingestion EYE: Potential for severe irritation if not treated immediately. Corneal damage on extended exposure. SKIN CONTACT: Varying severities of irritation are possible from prolonged, repeated, or occluded exposure to skin. Contact on a burn or other wound likely to cause stinging pain or irritation. INGESTION: Ingested amounts may cause burning and pain in the mouth and throat with redness and swelling of mucous membranes. May cause pain, vomiting, dizziness. Harmful if swallowed. INHALATION: Dust may cause irritation to the upper respiratory tract. SUBCHRONIC EFFECTS/CARCINOGENICITY: None known. Not classified as carcinogenic by IARC, NTP, OSHA, OR ACGIH or NIOSH. 4. FIRST AID MEASURES EYES: Immediately flush eyes with a directed stream of water for at least 15 minutes, forcibly holding eyelids apart to insure complete irrigation of all eye and lid tissues. IF IRRITATION PERSISTS GET MEDICAL ATTENTION. SKIN: Remove contaminated clothing, including footwear. Wash contaminated areas thoroughly with soap and water. Wash clothing before reuse. Do not reuse footwear that is contaminated on the inner surfaces. GET MEDICAL ATTENTION IF IRRITATION DEVELOPS. INHALATION: Immediately move from area of exposure to fresh air. If breathing is difficult have a trained person administer oxygen. If breathing has stopped, have a trained person administer artificial respiration. GET MEDICAL ATTENTION IMMEDIATELY. INGESTION: NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If ingested, do not induce vomiting. If the patient is conscious and can swallow, first rinse out mouth and then give one or two glasses of water to drink. GET MEDICAL ATTENTION IMMEDIATELY. 5. FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES FLASHPOINT: Not flammable FLAMMABLE LIMITS LFL: Not applicable

MSDS NUMBER: MSDS-1605 ISSUE DATE: 3/12/07 PAGE 3 OF 5 METHOD USED: Not applicable EXTINGUISHING MEDIA: CO2, powder, water spray. UFL: Not applicable FIRE-FIGHTING INSTRUCTIONS: Use a self-contained breathing apparatus (SCBA) and full protective equipment (Bunker Gear). UNUSUAL FIRE AND EXPLOSION HAZARDS: Material decomposes exothermically when damp. Rapid evolution of oxygen may increase intensity of fire. 6. ACCIDENTAL RELEASE MEASURES Wear personal protective equipment (See Section 8). Close off area to traffic. Large spills should be contained, swept up and placed into containers for disposal. 7. HANDLING AND STORAGE Wear protective equipment when handling material to prevent skin and eye contact. Avoid breathing dust. Store in a cool, dry area away from incompatible substances. Keep containers closed. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION EXPOSURE LIMITS: None ENGINEERING CONTROLS: General ventilation should be adequate. Use local exhaust if necessary. RESPIRATORY PROTECTION: Not normally required. Wear a NIOSH approved respirator with an organic vapor/mist cartridge where spray or mist exposure occurs, or where vapors are generated from mixes with incompatible materials. PROTECTIVE GLOVES: Impervious (rubber or neoprene) gloves where contact is likely. EYE PROTECTION: None under normal use. Use safety glasses with side shields or full face shields for industrial use. OTHER PROTECTIVE CLOTHING OR EQUIPMENT: None. Eyewash facility is recommended in work area or in close proximity. 9. PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE: White to off white powder. ODOR: None PHYSICAL STATE: Solid ph AS IS: 10.5 (1%in H 2 O) VAPOR PRESSURE: Not applicable VAPOR DENSITY: Not applicable BOILING POINT @ 760mm Hg: 215 º F

MSDS NUMBER: MSDS-1605 ISSUE DATE: 3/12/07 PAGE 4 OF 5 MELTING POINT: Not applicable SOLUBILITY IN WATER % by WT: 140g/l @75 F SURFACE TENSION: Not determined SPECIFIC GRAVITY (Water = 1): 1.06 g/cc @ 20 C VOLATILE ORGANIC COMPOUNDS: None 10. STABILITY AND REACTIVITY CONDITIONS TO AVOID: High temperatures (55 C, 130 F), High humidity levels, contaminants. CHEMICAL STABILITY: Stable under normal conditions. Product will evolve oxygen upon contact with water. INCOMPATIBILITY WITH OTHER MATERIALS: Oxidizers, reducing agents, flammable substances. HAZARDOUS DECOMPOSITION PRODUCTS: Oxygen evolves from contaminated material. Evolved oxygen can support combustion. HAZARDOUS POLYMERIZATION: Will not occur. 11. TOXICOLOGICAL INFORMATION Acute oral toxicity: Not determined Reproductive toxicity/teratogenicity: No components listed. Mutagenicity: Not determined Toxicologically synergistic products: None known. 12. ECOTOXICOLOGICAL INFORMATION TOXICITY: This product is expected to be moderately toxic to aquatic animals. PERSISTENCE: This product is not expected to persist in the environment. BIOACCUMULATION: This product is not expected to bioaccumulate. 13. DISPOSAL CONSIDERATIONS Dispose of waste product in accordance with all government regulations. State and local regulations may differ from federal. Be sure to consult with state and local agencies for specific rules. 14. TRANSPORTATION INFORMATION DOT proper shipping name: Not regulated (Data indicates that Sodium percarbonate <60% is not an oxidizer) DOT technical name: N/A DOT Hazard class: N/A Hazard subclass: N/A UN Number, proper shipping name: N/A

MSDS NUMBER: MSDS-1605 ISSUE DATE: 3/12/07 PAGE 5 OF 5 Packing group: N/A Other Transport information: Not hazardous for transport 15. REGULATORY INFORMATION TSCA: The components of this product are reported in the EPA TSCA Inventory List. OSHA: Hazardous under 29 CFR 1910.1200 CERCLA REPORTABLE QUANTITY: CERCLA requires that releases of hazardous substances to land, air or water, which are equal to or exceed the reportable quantity (RQ) be reported to the National Response Center (800-424-8802 RCRA: If this material becomes waste, it would not be a hazardous waste. SARA TITLE III: Section 302, Extremely Hazardous Substances: None Section 311/312, Hazardous Categories: Sodium Percarbonate- reaction hazard. Section 313, Toxic Chemicals: None DSL: All components listed. WHMIS Classification: Sodium percarbonate Class C, D2B 16. OTHER INFORMATION SUPERSEDES DATE: New REASON FOR REVISION: NEW For additional non-emergency health, safety and environmental information telephone 609.279.7705 or write to: Church & Dwight Co. Inc. Product Safety Affairs 469 North Harrison Street Princeton, New Jersey 08543 This Product Safety Data Sheet is offered solely for your information, consideration and investigation. Church & Dwight Co., Inc. provides no warranties, either express or implied, and assumes no responsibility for the accuracy or completeness of data contained herein. Church & Dwight Co., Inc. urges persons receiving this information to make their own determination as to the information suitability for their particular application.