UVIFED SOF Sheet-fed Offset UV Inks
FEATURES : APPLICATION : UVIFED SOF inks are designed for se on following sbstrates In-line Corona treated Polyethylenes and Polypropylenes with srface tension level of minimm 48 dyne/cm. Vinyls (Corona treated minimm 40 dyne/cm). Coated paper and Cardboards. Coated foil and film. Uncoated paper and Cardboard. Note : Test Ink adhesion for sbstrate sitability before prodction rn. PRINT CHARACTERISTICS : Sitable for single & mlticolor Sheetfed Offset Presses. Excellent prints, high color intensity & low dot gain. Very good scratch resistance with overprint varnish. Sitable for both inter-station cring and wet trapping. Good adhesion & color matching capability. UVIFED SOF inks provide crisp character definition with sharp and clean reverses. They also exhibit good flow, leveling and gloss. Intercoat adhesion and trapping are excellent. UVIFED SOF inks may be cred with high lamp power. It can pass throgh many cring stations and still remain receptive to sbseqent prints. UVIFED SOF inks are compatible with single and mlti color Sheetfed Offset presses. UVIFED SOF are overprintable with UV varnish. IMPORTANT Resistance properties (e.g. adhesion) of the inks shold be checked only after 24 hrs of post-cre printing operation. Same printing conditions mst be followed for proofing and blk prodction. PRESS PERFORMANCE : : Exceptional stability of ink-water balance. Ink remains stable on the roller. No misting even on high speed presses. Compatibility with all type of dampening soltion. CURING : Cring properties are dependent on color and opacity. UVIFED SOF inks can be cred by sing UV lamps of optimm cring speed of 300 m/min (with 3 lamps each of 120 W/cm minimm). The rate of cring is dependent on the sbstrate, condition of lamps & reflectors, color, thickness of the ink film etc. UV cring is followed by 24 hors post-cre phase after that film gets flly cred to get final properties. Generally black & opaqe white inks will cre slower than other inks and varnishes. PRE-PRODUCTION TEST : UVIFED SOF Series has been formlated to adhere to most corona or flame treated plastic materials with srface tension levels of minimm 48 dyne/cm. However, it is strongly recommended that all plain and over-printed / coated sbstrates are tested before se, as similar sbstrates can vary from batch to batch and spplier to spplier. Also, plasticizers in certain plastics may migrate to srface casing loss of adhesion of ink even after several hors of cring. IMPORTANT : END-USER MUST DETERMINE SUITABILITY OF THIS PRODUCT FOR THE INTENDED USE PRIOR TO PRODUCTION. CLEANING : To clean roller, plate and other eqipment se FGS 100 Roller. Wash for cleaning. COLOUR AVAILABILITY : The UVIFED SOF seritone color range comprises of standard halftone colors, opaqe white and other Seritone colors. Color matches, inclding metallic shades, can be spplied against print or wet ink sample.
UVIFED SOF LIST OF PRODUCTS Prodct Name Prodct Code Light IWS Alcohol Alkali Shade UVIFED SOF Process Yellow SOF052 7 5 4-5 UVIFED SOF Process Magenta SOF135 7 3-4 3 UVIFED SOF Process Cyan SOF215 7-8 5 5 UVIFED SOF Process Black SOF004 8 5 5 UVIFED SOF Overprint Clear SOF383 - - - Special Trichromatic Shade UVIFED SOF Process Yellow SOF053 7 5 4-5 UVIFED SOF Process Magenta SOF136 7 3-4 3 UVIFED SOF Process Cyan SOF216 7-8 5 5 UVIFED SOF Process Black SOF005 8 5 5 Prodct Name Basic Shade UVIFED SOF Black SOF001 8 5 4 UVIFED SOF Opaqe White SOF023 7-8 5 4 UVIFED SOF Mixing White SOF030 7-8 5 4 UVIFED SOF Yellow SOF064 7 5 4-5 UVIFED SOF Golden Yellow SOF066 7-8 4 5
UVIFED SOF LIST OF PRODUCTS Prodct Name Prodct Code Light IWS Alcohol Alkali Shade UVIFED SOF Orange SOF114 5 4 4 UVIFED SOF Red (Yellow shade) SOF122 6 4-5 4-5 UVIFED SOF Violet SOF127 7 4-5 4 UVIFED SOF Red (Ble shade) SOF164 6 4-5 4-5 UVIFED SOF Magenta SOF165 7 3-4 3 UVIFED SOF Green SOF325 7-8 5 4 UVIFED SOF Pantone Yellow C SOF045 7 5 4-5 UVIFED SOF Pantone Yellow 012 C SOF046 7 5 4-5 UVIFED SOF Orange 021 C SOF115 5 4 4 UVIFED SOF Warm Red SOF199 6 4-5 4-5 UVIFED SOF Red 032 SOF097 6 4-5 4-5 UVIFED SOF Prple SOF237 5 4 4 UVIFED SOF Pantone Violet C SOF128 7 4-5 4 UVIFED SOF Pantone Reflex Ble SOF260 7-8 4-5 4 UVIFED SOF Pantone Ble 072 C SOF254 7-8 4-5 4
ADDITIVE & VARNISHES Prodct Name Discription SOF818 Redcer SOF824 UV Cre Additive SOF433 Gloss dct varnish SOF400 Matt dct varnish SOF392 Gloss roller coat varnish SOF500 Matt roller coat varnish SOF410 Matt dct shimmering textred varnish (base) SOF412 Gloss dct shimmering varnish (top coat) SOF300 Primer for PP & other sbstrates for better adhesion FGS100 General Prpose Wash Metallic shades can be developed on specific reqest. Resistance rating done on scale of 1-5 1 is poor 2 is moderate 3 is acceptable 4 is good 5 is excellent Light Ble Wool Scale rating done on scale of 1-8 1 is poor 8 is excellent Note : The light fastness of the Shade card colors vary based on yor compter system when pigment is based on pigment manfactrers viewing and printing. Refer to actal print sample for more accrate recommendations and referred to as Ble Wool color representation. Scale. The light fastness vale is dependent on the qantity of the pigment in a blend and the thickness of the ink film, therefore it is possible that in color matches, sing low amont of colors,highly based black colors or thin film deposits that the light fastness may be lower than indicated in the table above. The resistance of the color matches shold always be based on the ink reference with the lowest resistance properties.
STORAGE & PACK SIZE: Keep inks in a cool place, away from direct snlight or extreme temperatres. Keep lids tightly closed when not in se. Any nsed ink shold not be retrned to the can; mst be stored separately. Shelf life is 12 months from the date of manfactre, nder storage at 15 C to 25 C. Stir well before every se. Available in 1 kg. and 5 Kgs. pack size. ENVIRONMENTAL INFORMATION UVIFED SOF inks do not contain ozone-depleting chemicals as described in the Montreal Convention. SOF inks are formlated free from aromatic hydrocarbons, which are known to have an adverse effect on the environment. SOF inks are also free from benzophenone and volatile solvents. SAFETY AND HANDLING UVIFED SOF inks : Are formlated to be free from any (toxic) carcinogenic, mtagenic or reprotoxic chemicals. Do not have flash point and therefore are exempt from the Flammable Liqid Reglations. Comprehensive information on the safety and handling of UVIFED SOF inks is given in the Material Safety Data Sheet, which is available on reqest. Important Note: The information and recommendations contained in this prodct information sheet as well as technical advice otherwise given by representative of or company, whether verbally or in writing, are based on or present knowledge and experience. Sch information/ technical advice is given in good faith, bt withot warranty, in view of the many factors that may affect processes or applications as we cannot cover or anticipate every possible application of or prodcts and becase manfactring methods, printing stocks and other materials vary. For the same reason or prodcts are sold withot warranty and on condition that sers shall make their own tests to satisfy themselves that the prodcts will meet flly the particlar reqirements of the labels/ brands/ agencies of their clients and also that no proprietary rights and existing laws and legislation are violated. Or advice does not relieve processors from the responsibility of carrying ot their own tests and experiments, nor does it imply any legally binding assrance in respect of properties or sitability for a specific prpose or of the legal stats of the listed prodcts. Or policy of continos prodct improvement might make some of the information contained in this prodct information sheet ot of date and sers are reqested to ensre that they follow crrent recommendations.
FUJIFILM SERICOL INDIA PVT LTD. 10/11, B. U. Bhandari Indstrial Estate, Sanaswadi, Tal. Shirr, Dist. Pne, Maharashtra, India, Pin : 412208 Tel. : 02137 392500/537, Fax : 02137 392555 Cstomer Care Tel : +91(0) 2137 392552 E-mail : sericolindia.cstomercare@fjifilmsericol.com Technical Help line : +91 (0) 2137 392523/524/525, Website : www.fjifilmsericol.in Pne Krishna Reddy 10/11 B.U. Bhandari Indstrial Estate, Sanaswadi, Tal: Shirr Pne, 412208 Tel. : +91 9764004577 e-mail : krishna.reddy@fjifilmsericol.com Mmbai Vaibhav Dhande 403 Parameshwari Centre, Opp. Nandanvan Indstrial Estate Near P&T colony, Mlnd-West Mmbai-400080 Tel. : +91 9725145260 Fax : +91-22-25918856 e-mail : vaibhav.dhande@fjifilmsericol.com Chennai / Bangalr Varn Srinivasa. 13, T.T.K.Road, Royapettah, Chennai-600014 Tel. : +91 9343203660 Fax : +91-44-28111383 e-mail : varn.srinivasa@fjifilmsericol.com Kolkata Dipankar Sasmal 16/1 Panchnantala Road, Belgharia, Kolkata 7000 56. West Bengal Tel. : +91 9331084916 Fax : +91-033 - 25560450 E-mail : dipankar.sasmal@fjifilmsericol.com Delhi Anand Klkarni B50, Naraina Ind Area, Phase II, Near Batra Banqet Hall, New Delhi-110028. Tel. : +91 9350758813 Fax : +91-11-25453246 e-mail : anand.klkarni@fjifilmsericol.com Srilanka Lasantha Peiris 99, Stace Road, Colombo 14, Sri Lanka. Tel : + 94 (0) 11 2436529 Fax : + 94 (0) 11 2 449907 Mobile : + 94 777 899 273 Email : lasantha.peiris@fjifilmsericol.com