Complex sensations, easy formulating. Flexibility dimensions of natural emulsifiers

Complex sensations, easy formulating. Flexibility dimensions of natural emulsifiers

Affordable O/W Body Lotion (SZ 24/14-87) A TEGO Care PBS 6 (Polyglyceryl-6 Stearate (and) Polyglyceryl-6 Behenate) 2.00 TEGO Alkanol 1618 (Cetearyl Alcohol) 0.75 TEGIN M Pellets (Glyceryl Stearate) 0.75 TEGO Care PBS 6 is a versatile PEG-free O/W emulsifier for challenging fluid emulsions. It supports the preparation of emulsions based on a hot/cold process which has the advantage that only the oil phase needs to be heated up. No subsequent cooling step is needed. Alternatively this emulsion can be manufactured by one-pot-process as well as via emulsion concentrate. TEGOSOFT P (Isopropyl Palmitate) 4.00 TEGOSOFT CT (Caprylic/Capric Triglyceride) 4.00 B Water 84.30 C Glycerin 3.00 TEGO Carbomer 141 (Carbomer) 0.20 (Euxyl PE 9010, Schülke & Mayr GmbH) 1.00 D Sodium Hydroxide (10% in water) q.s. 1. Disperse carbomer in phase B and heat to approx. 30 C. 2. Heat phase A separately to approx. 70 C. 3. Add phase A to phase B during homogenization. 4. Homogenize until uniform. 5. Add phase C and D while stirring and mix well until uniform. Emulsion viscosity: 27 Pa s (Brookfield RV DV-I, spindle 4, 5 rpm) 2/8 Evonik Nutrition & Care GmbH September 2015

Easy-to-spread O/W Body Spray (SZ 24/14-100) A Water 85.80 Glycerin 3.00 The versatile O/W emulsifier TEGO Care PBS 6 is especially suitable for formulating low-viscous systems like this Easy-to-Spread O/W Body Spray. This spray system can be manufactured with a simple one-pot-process helping to reduce the complexity of the production set up. TEGO Carbomer 141 (Carbomer) 0.20 B C TEGO Care PBS 6 (Polyglyceryl-6 Stearate (and) Polyglyceryl-6 Behenate) 2.00 TEGOSOFT P (Isopropyl Palmitate) 4.00 TEGOSOFT CT (Caprylic/Capric Triglyceride) 4.00 (Euxyl PE 9010, Schülke & Mayr GmbH) 1.00 D Sodium Hydroxide (10% in water) q.s. 1. Disperse carbomer in phase A and heat to approx. 75 C. 2. Add ingredients of phase B to phase A in the given order. Stir well after each single ingredient. 3. Homogenize. 4. Cool down with simple stirring to approx. 35 C and add phase C. Stir well. 5. Adjust the ph value to 6-6.5 with phase D. Emulsion viscosity: 5 Pa s (Brookfield RV DV-I, spindle 4, 5 rpm) 3/8

Rich And Caring O/W Cream (H 25/14-3) A TEGO Care PSC 3 (Polyglyceryl-3 Dicitrate/Stearate) 4.00 TEGIN M Pellets (Glyceryl Stearate) 2.00 TEGO Alkanol 18 (Stearyl Alcohol) 1.00 TEGOSOFT P (Isopropyl Palmitate) 12.00 TEGOSOFT CT (Caprylic/Capric Triglyceride) 16.00 TEGOSOFT OER (Oleyl Erucate) 5.00 Prunus Amygdalus Dulcis (Sweet Almond) Oil 10.00 B Water 43.00 Glycerin 2.00 C Xanthan Gum (Keltrol CG-SFT, CP Kelco) 0.20 Glycerin 1.00 Water 2.80 D Sodium Hydroxide (10% in water) 0.20 Benzyl Alcohol; Glycerin; Benzoic Acid; Sorbic Acid (Rokonsal BSB-N, Ashland) 0.80 TEGO Care PSC 3 is a natural, cost-efficient PEG-free O/W emulsifier that is able to handle oil phases from very low to very high amounts. This natural O/W cream contains 50% oil phase and is processed via a classical hot/hot process. The rich and caring skin feel is obtained by the emulsifier in combination with suitable emollients like TEGOSOFT OER, a Jojoba oil alternative. 1. Prepare phase C separately by adding the ingredients in the given order. 2. Heat phase A and B separately to 70-75 C. 3. Add phase A to phase B with stirring. 1) 4. Homogenize. 5. Cool down with stirring to approx. 40 C. 6. Add phase C and stir well. 7. Add ingredients of phase D in the given order and stir well in between. 8. Adjust the ph value to 5.0-5.5. 1) Important: If phase A has to be charged into the vessel first, phase B must be added without stirring. Emulsion viscosity: 60 Pa s (Brookfield RV DV-I, spindle C, 10 rpm) 4/8 Evonik Nutrition & Care GmbH September 2015

Energizing Light Face Care Cream (MK 2/14-84) A TEGO Care PSC 3 (Polyglyceryl-3 Dicitrate/Stearate) 2.50 TEGIN M Pellets (Glyceryl Stearate) 2.00 TEGO Alkanol 18 (Stearyl Alcohol) 1.00 TEGOSOFT P (Isopropyl Palmitate) 3.50 TEGOSOFT CT (Caprylic/Capric Triglyceride) 3.00 TEGOSOFT OER (Oleyl Erucate) 2.00 B Water 30.00 Glycerin 3.00 TEGO Cosmo C 100 (Creatine) 0.50 TEGO Carbomer 134 (Carbomer) 0.20 C Water 51.30 D Sodium Hydroxide (10% in water) q.s. E (Euxyl PE 9010, Schülke & Mayr GmbH) 1.00 This Energizing Light Face Care Cream is produced via an emulsion concentrate. During this process the major part of the water does not have to be heated up which allows a more quick and cost-efficient production. An additional benefit of TEGO Care PSC 3 is its formulation flexibility with regard to oil phase content. Cost-efficient creams with a low oil phase (14%) content can be formulated providing a light, non-watery skin feel. 1. Disperse carbomer in phase B and heat to approx. 75 C. 2. Heat phase A separately to approx. 75 C. 3. Add phase A to phase B during homogenization. 4. Homogenize until uniform. 5. Dilute phase A/B with phase C (room temperature). 6. Homogenize for a short time. 7. Add phase D and E while stirring and mix well in between. Emulsion viscosity: 44 Pa s (Brookfield RV DV-I, spindle C, 10 rpm) 5/8

Economic W/O Body Lotion (H 19/14-3) A ISOLAN GPS (Polyglyceryl-4 Diisostearate/Polyhydroxystearate/Sebacate) 2.50 Paraffinum Perliquidum 10.00 TEGOSOFT OP (Ethylhexyl Palmitate) 9.00 Zinc Stearate 0.50 B Water 72.30 C Glycerin 3.00 Magnesium Sulfate Heptahydrate 1.50 TEGO Cosmo C 100 (Creatine) 0.50 (Euxyl PE 9010, Schülke & Mayr GmbH) 0.70 ISOLAN GPS allows the formulation of economic W/O emulsions with a low oil phase content (22%) which can be manufactured via a cold/cold process. 1. Disperse Zinc Stearate in phase A. 2. Add phase B to phase A slowly while stirring. 3. Homogenize for a short time. 4. Add phase C and homogenize again. Emulsion viscosity: 20 Pa s (Brookfield RV DV-I, spindle 5, 10 rpm) 6/8 Evonik Nutrition & Care GmbH September 2015

Smoothing Air Cushion Foundation (SC 050-11-0003) A ISOLAN GPS (Polyglyceryl-4 Diisostearate/Polyhydroxystearate/Sebacate) 2.70 Disteardimonium Hectorite (Bentone 38 V CG, Elementis Specialties) 0.64 A low-viscosity foundation which is suitable for use in air cushion packaging. It is based on ISOLAN GPS, a 100% natural emulsifier. The foundation provides to the skin a very smooth and clear skin finish. This is possible due to the addition of the low viscous emollient TEGOSOFT DEC. Alcohol (95%) 0.32 B Mineral Oil 3.34 TEGOSOFT DEC (Diethylhexyl Carbonate) 9.70 Cyclopentasiloxane, Cyclohexasiloxane (Dow Corning 345 Fluid, Dow Corning) 6.00 Aluminum Starch Octenylsuccinate (Dry-Flo Pure, AkzoNobel) 1.00 Talc/Triethoxycaprylylsilane (Talc 46R AS, K.S.Pearl) 1.00 Titanium Dioxide/Triethoxycaprylylsilane (TiO2 CR-50 AS, K.S.Pearl) 7.20 CI 77492, Iron Oxides, Triethoxycaprylylsilane (Unipure Yellow LC182 AS-EM, Sensient) 0.60 CI 77491, Iron Oxides, Triethoxycaprylylsilane (Unipure Red LC381 AS-EM, Sensient) 0.10 CI 77499, Iron Oxides, Triethoxycaprylylsilane (Unipure Black LC989 AS-EM, Sensient) 0.02 TEGOSOFT DEC (Diethylhexyl Carbonate) 6.00 C Glycerin 15.00 Sodium Chloride 1.00 VARISOFT PATC (Palmitamidopropyltrimonium Chloride) 1.00 1. Mix Bentone 38 V CG into mineral oil. Then add ISOLAN GPS. Mix well using high shearing speed to disperse the Bentone. Then add alcohol to activate it to form a thick gel. 2. Add Dow Corning 345 Fluid and TEGOSOFT DEC to disperse the gel with stirring. To make sure the Bentone Gel can be activated well heat this mixture to 70 C. Use high shearing speed to disperse it as well as the other ingredients. 3. Use high shearing speed to disperse phase B. Add phase B to phase A and mix well. 4. Prepare phase C separately. 5. Add phase C into phase A/B with stirring (approx. 500 rpm). Z Water 44.38 (Euxyl PE 9010, Schülke & Mayr GmbH) q.s. 6. Homogenize with fast stirring (1300 rpm, 3 min.). Emulsion viscosity: 4 Pa s (Brookfield RV DV-I, spindle 5, 10 rpm) 7/8

Europe France phone +33 237 82-7193 Italy phone +39 0348 3363-778 Russia phone +7 495 721 2862 ext. 577 Scandinavia phone +45 449 91-800 Spain phone +34 93 3458-822 United Kingdom phone +44 78 02791748 Asia China phone +86 21 6119-3001 India phone +91 22 6723-8891 Indonesia phone +62 21 882-8322 Japan phone +81 3 5323-7384 South Korea phone +82 2 320-4784 The Americas Canada phone +1 905 336-3423 Brazil phone +55 11 3146-4139 Mexico phone +52 55 5483-0973 USA phone +1 804-727-0709 Africa South Africa phone +27 11 697-0724 Australia Australia & New Zealand phone +61 3 8581 8414 This information and all further technical advice is based on our present knowledge and experience. However, it implies no liability or other legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply that similar products could not be used. For more detailed information or to obtain a brochure which addresses a specific area of interest, please contact the Head Office of Evonik Nutrition & Care GmbH in Essen or contact your local representative. This product information is not intended to provide legal or regulatory advice about product uses or claims in any jurisdiction and should not be relied upon for such guidance (especially in the United States, Canada, and Mexico). Since global regulatory requirements differ, parties accessing this information are solely responsible for determining whether the products and/or claims comply with applicable local laws and regulations, including but not limited to import and export regulations. Please contact your local Evonik representative for more product information. Evonik assumes no liability for any use of our products that is not in compliance with the requirements of the country of the user. This product is not intended to be used as a drug. September 2015 Evonik Nutrition & Care GmbH Personal Care Goldschmidtstraße 100, 45127 Essen, Germany p.o. Box, 45116 Essen phone +49 201 173-3500, fax +49 201 173-713500 personal-care@evonik.com www.evonik.com/personal-care