Material Safety Data Sheet NOT CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF NOHSC Cover Page 1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY - Australia Product name Product code Product use Company Address ST Tropez Naturals Radiant Tanning Lotion STNTAB200 Skin Care (consumer commodity) International Beauty Supplies 6e Narabang Way, Belrose NSW, Australia 2085 Telephone number (02) 9486 3211 Fax number (02) 9486 3233 EMERGENCY TELEPHONE NUMBER Poisons Control Australia 131126 Bill McKendrick Managing Director (BH) (02) 9486 3211 (AH) 0413 116 615 Product Name :Naturals Radiant Tanning Lotion Version :1:1 Revision Date :10 January 2011
MATERIAL SAFETY DATA SHEET 1. IDENTIFICATION OF SUBSTANCE/PREPARATION AND COMPANY PRODUCT: ST TROPEZ NATURALLY RADIANT TANNING LOTION PRODUCT CODE: UM1499 Company Identification: St. Tropez P.O. Box 800876 Santa Clarita CA 91380 United States of America (800) 366-6383 info@sttropeztan.com 2. COMPOSITION/INFORMATION AND INGREDIENTS Hazardous Ingredients: Substance Concn Hazard R phrases Sodium stearoyl glutamate 1% Xi R36 3. HAZARDS IDENTIFICATION Health Hazards: Non-hazardous. 4. FIRST AID MEASURES Ingestion: Rinse mouth with water. Give milk or water to drink. Obtain medical advice. Inhalation: Not applicable. Skin Contact: Not applicable Eye Contact: Immediately rinse eyes with plenty of water. Remove any contact lenses. If tissue damage or persistent irritation is apparent, obtain medical advice immediately.
5. FIRE FIGHTING MEASURES Extinguishing Media: C02, dry chemical, chemical foam, water spray or mist (not water jet). Special Exposure Hazards: Special Protective Equipment: Halogen and nitrogen decomposition products expected. Self-contained breathing apparatus or suppliedair breathing apparatus may be required. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions: Not applicable. Environmental Precautions: No specific precautions advised. Methods of Cleaning: Absorb the material onto porous, inert material, such as 7. HANDLING AND STORAGE sand, earth etc and dispose of in accordance with local regulations. Storage Conditions: Store indoors at constant temperature, preferably around 15 0 C. Keep away from oxidising agents. General Handling Precautions: Handle in accordance with good occupational hygiene and safety practices. Avoid contact with skin and eyes. Do not ingest undiluted material. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Exposure Controls: Personal Protection: Not applicable If excessive exposure is anticipated the following protection measures should be taken: Hand protection: Disposable/rubber gloves. Skin protection: Overalls with protection to arms.
9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Off White Thick Cream Odour Characteristic. ph: 4.0-4.5 @25 C Boiling Point: Melting Point: Flash Point: >100 C. Flammability (Solid Gas): Explosive Properties: Non-explosive. Oxidising Properties: Non-oxidiser. Wt/ml @ 20 0 C: 1.02-1.04@20 C Solubility: Water dispersible. Partition Coefficient Not determined. Refractive Index Not determined. 10. STABILITY AND REACTIVITY Stability: Materials to Avoid: Stable under normal conditions. Strong oxidising materials. 11. TOXICOLOGICAL INFORMATION Not hazardous. 12. ECOLOGICAL INFORMATION None available. 13. DISPOSAL CONSIDERATIONS Disposal should be according to local authority regulations. Not a special waste. 14. TRANSPORT INFORMATION General information non hazardous according to ADR/ RID, IATA and IMDG regulations UN Number: Not classified under UN Transport Regulations. 15. REGULATORY INFORMATION Non-hazardous.
16. OTHER INFORMATION Nil Date of Issue 10 January 2011 (section 9 taken from tentative spec) Issue No: 1. This Safety Data Sheet has been prepared in order to assist users to perform their own assessment of the requirements for safe handling under the Control of Substances Hazardous to Health Regulations and similar legislation. The information provided in this MSDS is correct to the best of our knowledge, information and belief at the date of its publication, and is, in our opinion consistent with the state of general scientific and technical knowledge at that date, but we cannot accept liability for loss, injury or damage which may result from its use. We must point out that it is the responsibility of any intermediate supplier to ensure that the information contained in this MSDS is passed to the ultimate user. If any such ultimate user wishes to make arrangements for versions to be sent directly to him, we shall if so notified, be glad to make the necessary entry in our records.