PRODUCT DATA SHEET Kaufmann Quick Dry Enamel SECTION A: SECTION B: DESCRIPTION A specially formulated quick-drying industrial enamel for spray or dipping, suitable for use on properly primed and prepared steel surfaces for use both interior and exterior.ideal for use on steel poles, fencing, sheets or structural steel as exceptional durability has been achieved. Provides a full gloss finish and is available in 19 standard colours and other popular Q.D. colours. COMPOSITION Modified alkyd resin blend in aromatic hydrocarbon solvent. SECTION C: SECTION D: PHYSICAL PROPERTIES Colour: Appearance: Viscosity: Shelf Live: Storage Conditions: Pack Size: S.G: APPLICATION PROPERTIES Method: Average Dft: Spreading Rate: Wet Film Thickness: Number of coats: Drying Time: Overcoating Time: Thinning: Cleaning Solvent: Recommended systems: Various Full gloss finish 90 fc4 @ 25 deg C 12 Months Normal 1ltr, 5ltr, 20ltr and 200ltr 0.950 (typical) Dipping or Spray 20-35 microns (Recommended) Variable due to application method 50-75 microns 1 or 2 as required Surface 5 mins, Hard 4hrs Max Between 30 mins to 8 hrs depending on which top-coat is applied Enamel thinners (q.d. thinners) Enamel thinners (q.d. thinners) As a top-coat above suitable metal primers for steel structures SECTION E: SECTION F PRECAUTION Do not spray in wet or damp weather as this can cause the film to blush (opaque matt finish) Flash point: Toxicity: See M.S.D.S. Store below 23 deg C SURFACE PREPARATION Q.D. Enamel is a fast drying economical industrial finish for interior and exterior use, recommended for the painting of metal and wood surfaces that must have a glossy finish e.g. earth moving equipment, garden furniture, metal trusses, wooden crates etc. Q.D Enamel may be applied directly onto the cleaning surface. We recommend Q.D. Enamel be overcoated, if necessary, within one hour of the application of the first coat. Application is normally by conventional spray, using approximately six parts paint to one part Q.D. Thinners. For dip application, thin with Q.D. Thinners the amount being dependant on the run off and the shape of the article. SECTION G: NOTE No guarantees is implied by the recommendations contained herein; since the data sheet is issued for information only. Method of application, surface cleanliness, conditions of use etc. are beyond our control.
Kaufmann Quick Dry Enamel SECTION 1: SECTION 2: IDENTIFICATION OF THE SUBSTANCE/PREPARATION NO LEAD PIGMENTS PRESENT CAS no. : EC Label : EcoChem : 95.65.00 UN No. : 1263 EAC : 127 Hazchem : 3[Y]E Kemler : 33 SAPMA : 2-H-E In emergency contact Mylaw Chemicals & Coatings (Pty)Ltd (Chief Chemist) at (011) 474 1900 COMPOSITION/INFORMATION ON INGREDIENTS EG LEAD DRIERS "S" SOLVENT EC Classification: F XI R11,18,36/37/38 S2,16,33,38,43A HAZARDOUS AND/OR OTHER RELEVANT COMPONENTS LOW BPt H TREATED NAPHTHA BENZ<.1 (SBP4): >10 % [CAS #: 64742-82-1] [E.C. #: 649-330-00-2] EEC Labels : F XN OEL 1200mg RL N-BUTANOL: <25 % [CAS #: 71-36-3] [E.C. #: 603-004-00-6] EEC Labels : XN OEL 15Omg OEL 50ppm STOEL 150mg STOEL 50ppm RL S (CL/RL = Controlled/Recommended level 'S' = Skin annotation) Lead Content - Total : <1.0 Soluble : >.15 Soluble on NV : <5.0 SECTION 3: HAZARDS IDENTIFICATION SAPMA Health Rating: 2-MODERATE - Temporary or minor injury possible even if treatment given Irritating, narcotic. Can affect CNS. Irritating, risk of dermatitis. May be absorbed. Irritating. Irritating and nauseating. No carcinogenic, mutagenic or genetic effects established May have short term environmental effects. Contain, monitor & remove. SECTION 4. FIRST AID MEASURES Move to fresh air. In case of discomfort seek medical attention. Use hand cleaner/soap & water. Remove contaminated clothing. If any discomfort get medical attention. Rinse immediately with plenty of water. Seek medical advice if symptoms persist. Wash mouth with plenty of water. Do NOT induce vomiting. seek medical attention. SECTION 5: FIRE FIGHTING MEASURES Flammable with toxic fumes. Potential for spontaneous combustion. Containers can burst in a fire. Can form explosive vapour/air mixture. Static discharge hazard! Foam. CO2. Dry powder. Fog to cool and control. Do NOT use water jets. Cool containers in case of fire. SECTION 6: ACCIDENTAL RELEASE MEASURES - SEE ALSO SECTIONS 5, 8, 13 Contain & Collect. Use inert NOT sawdust. Remove waste to safe place - potential for spontaneous combustion. SECTION 7: SECTION 8: HANDLING AND STORAGE Store separately from any reactive substances - oxidisers in particular. No open flames. No smoking. Keep containers cool. Avoid free fall of liquid - use earthing. Subject to local bylaws EXPOSURE CONTROLS/PERSONAL PROTECTION SAPMA Rating: 2-H-E PPE : Respirator and Eye protection In case of insufficient ventilation, use suitable respiratory protection. Use barrier cream and impervious gloves. Use face shield & goggles or full face respirator/hood. Avoid direct contact.
Kaufmann Quick Dry Enamel.../continued OEL Type: Observe the rules fo hygiene. Wash before eating, drinking or smoking. MIX- Mixture - See Section 2 Skin SECTION 9: SECTION 10: SECTION 11: SECTION 12: SECTION 13: SECTION 14: PHYSICAL AND CHEMICAL PROPERTIES Chemical class: PAINT PRODUCT Description: VISCOUS LIQUID Smell: PUNGENT Visc.: +/- 75KU SG: >1.0 ph: NV: >50 FlashPoint ( C): <23 Water: Insoluble Oil: Miscible STABILITY AND REACTIVITY Stable under normal conditions Could generate static - USE EARTHING Potential for spontaneous combustion Inert - no reaction with fire-fighting water TOXICOLOGICAL INFORMATION No carcinogenic, mutagenic or genetic effects established Toxicity levels not established ECOLOGICAL INFORMATION May have short term environmental effects. Contain, monitor & remove. DISPOSAL INFORMATION Use reputable waste contractors - potential for spontaneous combustion. Care with used containers. TRANSPORT INFORMATION UN No. : 1263 : PAINT PRODUCT NOS Contains BUTANOLS and PAINT PRODUCT Packing group: II IMO Class : 3.2 EAC: 127 Hazchem: 3[Y]E Kemler: 33 SECTION 15: REGULATORY INFORMATION EC Label: Contains: LOW BPt H TREATED NAPHTHA BENZ<.1 (SBP4) EC Classification: F XI R11,18,36/37/38 S2,16,33,38,43A R11: Highly Flammable R18: In use may form flammable/explosive vapour-air mixture R36/37/38: Irritating to eyes, respiratory system and skin S2: Keep out of reach of children. (Retail sales items) S16: Keep away from sources of ignition - No smoking S33: Take precautionary measures against static discharges S38: In case of insufficient ventilation, wear suitable respiratory equipment S43A: In case of fire, use water fog, foam or powder - Do not use water jets!
Kaufmann Quick Dry Enamel.../continued SECTION 16: OTHER INFORMATION Take precautionary measures against static discharges. In case of any discomfort always seek medical advice. This MSDS conforms with General Administrative Regulations of 6 Sept.1996 (ISO-11014/ANSIZ400.1.1996) OELs derived from OHS Act Regulations for Dangerous Chemical Substances of 25 Aug.1995 (EH-42) SAPMA Rating - South African Paint Manufacturers Association Guide to Health Hazards (SABS ARP 006:1991) All information is given in good faith but without guarantee in respect of accuracy. No responsibility is accepted for errors or omissions or the consequences thereof. These recommendations were extracted from the EcoChem database (Les Fisher - 031-2660523).