Formules Courtes. Ce dossier spécial «Formules courtes» regroupe des idées de formules réalisées avec moins de 10 ingrédients!

Dossier spécial Formules Courtes Ce dossier spécial «Formules courtes» regroupe des idées de formules réalisées avec moins de 10 ingrédients! Ces bases simples et sans ingrédient superflu permettront de nourrir vos projets dans différents univers : > Dermo-cosmétique > Peaux fragiles et sensibles > Cible bébé et enfants > Formules économiques réalisées dans un esprit «Formuler malin ou comment faire mieux avec moins?!»

Dossier «Formules Courtes» Les «Formules courtes» de ce dossier spécial sont réalisées avec moins de 10 ingrédients. NB : Elles ne sont plus toujours échantillonables Ces bases simples et sans ingrédient superflu sont formulées à partir de différents systèmes émulsionnants. Elles entreront dans différentes gammes (formules simples / formules simples naturelles / formules bébé et enfants / soins spécifiques). Cliquez sur le nom de la formule pour atteindre la page correspond ante Système émulsionnant Acticire Emulfree Emulim 22 Emulim Delta Emulim Kappa² Emulim Mellifera Novemer EC-2 Pemulen TR-1 Pemulen TR-2 Plurol Diisostéarique Formules simples Anti-imperfection Cream 1377_1_01 p.4 Japanese Serum 1400_2_02 p.5 Rapid Results Skin Quenching Cream B-0073 (EU) p.6 RefinedSimplicityJB 2412 p.7 21st Century Hydrating Cream F-0047 p.9 After Shave Balm for Sensitive Skin M-0006 p.10 Formules simples naturelles Creamy Emulsion 1238_2_01 p.12 Naked Cream Gel 1305_1_09 p.13 Delight and Nourrish 1356_1_11 p.14 Soothing Day Cream JB 2730_A p.15 Formules bébé & enfant Edible Mum and Baby Balm 1304_1_01 p.17 Moisturizing Baby Cream JB 2806-K p.18 W/O Baby Cream MM 7516 p.19 Mommy n Me Sprayable Liquid Powder O-0005 (EU) p.20 PEG-Free Emulsion for Baby Wipe W-0001 (EU) p.21 Soins spécifiques Cloud Mask JB 2840_H p.23 Translucent Skin Toner O-0050B (AP) p.24 Plurol Stéarique

Formules simples

ANTI-IMPERFECTION CREAM 1377-1.01 Phase Material Name INCI Supplier Properties % Material A CETYL ALCOHOL, GLYCERYL STEARATE, EMULIUM O/W DELTA PEG-75 STEARATE, CETETH-20, GATTEFOSSE emulsifier STEARETH-20 3,0 CETIOL CC DICAPRYLYL CARBONATE BASF emollient 3,0 CETIOL C5 COCO-CAPRYLATE BASF emollient 4,0 B DEMINERALIZED WATER WATER - - 80,6 CARBOPOL ULTREZ 20 ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER LUBRIZOL gelling 0,2 GLYCERIN GLYCERIN - moisturizing 3,0 SATIAXANE CX91 XANTHAN GUM CARGILL gelling 0,2 C SODIUM HYDROXIDE (10 % SOL.) WATER, SODIUM HYDROXIDE - base 0,4 D PRESERVATIVE PRESERVATIVE - preservative 0,4 E PROPANEDIOL, WATER, ALCOHOL, IRIS anti-acne, CYTOBIOL TM IRIS A 2 FLORENTINA ROOT EXTRACT, ZINC SULFATE, RETINYL PALMITATE GATTEFOSSE sebum control 5,0 F EXPRESSIONS PERFUME PRECIEUSE 0601579 PARFUM perfume PARFUMEES 0,2 100,0 Operating Instructions - Sprinkle Carbopol Ultrez 20 over water, leave to hydrate. - Disperse Satiaxane CX91 (10 min.) into B. - Unter mixing, add A heated to 75 C to B heated to 75 C. - Add C and D. - Add E about 35 C then F. - Cool under mixing. - Aspect : white cream - ph : 5.3 ± 0.5 - Viscosity (spindle B,speed 5) : 50 000 mpa.s after 24H. Trial Notes This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided.

JAPANESE SERUM 1400-2.02 Phase Material Name INCI Supplier Properties % Material A DEMINERALIZED WATER WATER - - 83,25 ACRYLATES/C10-30 ALKYL CARBOPOL ULTREZ 21 ACRYLATE CROSSPOLYMER LUBRIZOL gelling 0,10 GLYCERIN GLYCERIN - moisturizing 3,00 BUTYLENE GLYCOL BUTYLENE GLYCOL - dispersing, 5,00 solubilizer SATIAXANE CX91 XANTHAN GUM CARGILL gelling 0,20 B POLYGLYCERYL-6 DISTEARATE, EMULIUM MELLIFERA JOJOBA ESTERS, POLYGLYCERYL-3 GATTEFOSSE O/W emulsifier 3,00 BEESWAX, CETYL ALCOHOL PRESERVATIVE PRESERVATIVE - preservative 1,00 C KF-96-6CS DIMETHICONE SHINETSU feeling 4,00 D SODIUM HYDROXIDE (10 % SOL.) WATER, SODIUM HYDROXIDE - base 0,25 E PERFUME SOINS PRESTIGE ARX/34516 PARFUM AROMAX perfume 0,20 100,00 Operating Instructions - Sprinkle Carbopol Ultrez 21 over water, leave to hydrate. - Under mxing, add glycerin, butylene glycol and Satiaxane CX 91, then heat to 75 C. - Heat B to 75 C. - Under rapid mixing (rotor/stator 2000 rpm) add B to A. - Maintain this rapid mixing for about 5 min. - Add phase C, continue rapid mixing for about 5 min. - Add phase D, continue rapid mixing for about 5 min. - Cool under moderate mixing and at about 35 C, add E. Trial Notes - Aspect : White Serum - ph = 6.0 ± 0.5 - Viscosity Brookfield RV (spindle A, speed 5) : approx. 7 000 mpa.s after 24H This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided.

Rapid Results Skin Quenching Cream B-0073(EU) This cream, enriched with hydrating actives, imparts intense moisturization to thirsty and dry skin. The high electrolyte dead sea salt extract is stabilized by the synergy between Novemer * EC-2 and Carbopol * Ultrez 20 Polymers, providing viscosity and excellent emulsion stabilization in this cushiony cream. Schercemol * NGDO Ester offers additional emolliency and softness, leaving the skin supple and smooth. : INCI Name, Trade Name Weight % Function A. 1. Deionized Water 54.40 Diluent 2. Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Carbopol * Ultrez 20 Polymer 3. Sodium Acrylates/Beheneth-25 Methacrylate Crosspolymer (and) Hydrogenated Polydecene (and) Lauryl Glucoside, Novemer * EC-2 Polymer (20 %TS) 4. Neopentyl Glycol Diethylhexanoate, Schercemol * NGDO Ester 5. Onopordum Acanthium Flower/Leaf/Stem Extract (and) Alcohol (and) Water, Gatuline Skin-Repair BIO 0.40 Rheology Modifier 5.00 Rheology Modifier / Emulsion Stabilizer 10.00 Emollient 2.00 Botanical Extract Product Properties: Appearance White-yellow cream ph 6.0 6.5 Viscosity (mpa s)** 11,000 16,000 Stability: Passed 3 months @ 25 C and 45 C, Passed 5 freeze/thaw cycles Novemer * EC-2 Polymer (%TS) 1.0 Recommended Packaging Jar **Brookfield RV, DVII+ Viscometer spindle #5 @ 20 rpm, 25 C @ 24 hours 6. Phenoxyethanol (and) Ethylhexylglycerin, Euxyl PE 9010 1.00 Preservative 7. Fragrance, Creamans 0.10 Fragrance B. 8. Deionized Water 25.00 Diluent 9. Sea Salt, Dead Sea Salt (Ground) 1.00 Skin Conditioner 10. Sodium Hydroxide (18%) 1.10 Neutralizer Supplier References: Lubrizol Advanced Materials, Inc. (Noveon * Consumer Specialties) (2, 3, 4) Gattefossé (5) Schülke & Mayr (6) Essential Compositions (7) A & E Connock (9) VWR (10) Procedure: 1. PART A: Sprinkle Carbopol * Ultrez 20 Polymer on the surface of Deionized Water. After the polymer has thoroughly wet-out, mix at low speed. 2. Add Novemer * EC-2 Polymer and mix until uniform. 3. Add Schercemol * NGDO Ester and mix with vigorous agitation. Mix until uniform. 4. Add the remaining PART A ingredients and mix until uniform. 5. PART B: In a separate vessel, mix PART B ingredients until uniform. 6. Slowly add PART B to PART A with rapid mixing. Mix until uniform. B-0073(EU) Edition: February 10, 2012 Reference #: LLN-037-11 (111013-01) (LUBQ) Original Edition: January 17, 2012 For more information visit www.personalcare.noveon.com or contact your nearest Lubrizol Advanced Materials location. North America 9911 Brecksville Road Cleveland, OH 44141-3247 TEL: 216.447.5000 TEL: 800.379.5389 FAX: 216.447.5250 Mexico Avenida Interceptor Pte. #69 Parque Industrial La Joya Cuautitlán, Izcalli - Mexico City Edo. de México 54730, México TEL: 52.55.3067.0860 FAX: 52.55.5870.8956 Brazil Av. Fagundes Filho 134 - Cj. 101, 10th floor Edificio Victoria Office Center São Judas, 04304-010 São Paulo TEL: 55.11.4082.1330 FAX: 55.11.4082.1345 Europe, Middle East and Africa Chaussée de Wavre, 1945 B-1160 Brussels, Belgium TEL: 32.2.678.19.11 FAX: 32.2.678.20.02 Asia Pacific 1107-1110 Shui On Centre 6-8 Harbour Road Wanchai, Hong Kong TEL: 852.2508.1021 FAX: 852.2512.2241 South Asia 501 & 501A, Omega Hiranandani Business Park Powai Mumbai 400 076 India TEL: 91.22.6698.0590 / 91 FAX: 91.22.6602.7888 China 27/F Majesty Building No. 138 Pudong Avenue Shanghai 200120, PRC TEL: 86.21.3866.0366 FAX: 86.21.5887.6981 The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc. s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner. Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation Noveon is a registered trademark of The Lubrizol Corporation *Trademark owned by The Lubrizol Corporation Copyright 2012 Lubrizol Advanced Materials, Inc.

REFINED SIMPLICITY JB 2412 Ingredients INCI designation % W/W Ingredient Function Phase 1 EMULIUM 22 (1) TRIBEHENIN PEG-20 ESTERS 4.00 Emulsifier o/w LABRAFAC CC (1) CAPRYLIC/CAPRIC TRIGLYCERIDE 15.00 Emollient Phase 2 DEMINERALIZED WATER WATER 78.95 CARBOPOL ULTREZ 10 (2) CARBOMER 0.25 Gelling RHODICARE S (3) XANTHAN GUM 0.20 Gelling Phase 3 SODIUM HYDROXIDE (10 % SOL.) SODIUM HYDROXIDE 0.50 Neutralizing Phase 4 PERFUME FRAIS 4164 (4) 0.10 Perfume PRESERVATIVE 1.00 Preservative (1) GATTEFOSSE SAS / (2) LUBRIZOL / (3) RHODIA / (4) M.L.W 100,00 APPAREANCE: White supple cream MANUFACTURING PROCESS: - Sprinkle Carbopol Ultrez 10 over water, leave to stand. - Under mixing, add Rhodicare S to II. - Heat I and II to 75 C. - Under rapid mixing (Rotor/Stator 2000 rpm), add I to II. - Maintain rapid mixing for about 5 min then add III. - Continue rapid mixing for about 5 min. - Cool under planetary stirring and at about 35 C, add IV. - Complete cooling. PROPERTIES: - ph = 5.5 ± 0.5 - Viscosity Brookfield RV (spindle B, speed 5): approx. 21 000 mpa.s after 24 h. ASPECT: Crème souple blanche MODE OPERATOIRE: - Saupoudrer Carbopol Ultrez 10 dans l'eau, laisser s'hydrater - Sous agitation, ajouter Rhodicare S à II. - Chauffer les phases I et II à 75 C. - Sous agitation rapide (Rotor/Stator 2000 tr/min ), ajouter I dans II. - Maintenir l'agitation rapide pendant environ 5 min. - Ajouter III. - Poursuivre l'agitation rapide pendant environ 5 min - Refroidir sous agitation planétaire et vers 35 C ajouter IV. - Terminer le refroidissement. This formula is presented in good faith, and we believe it is correct, but no warranty as to accuracy of results, or fitness for a particular use is given, nor is freedom from patent infringement to be inferred. It is offered solely for your consideration, investigation and verification. Cette formule correspond à notre meilleure connaissance et est fournie à titre indicatif. Elle n'implique aucune garantie de notre part en ce qui concerne l'emploi et les méthodes d'emploi de ladite formule et de ses ingrédients, ceci étant de la seule responsabilité des utilisateurs, qui devront en particulier vérifier qu'ils ne contreviennent pas à des brevets existants. Copyright GATTEFOSSÉ

PROPRIÉTÉS: REFINED SIMPLICITY JB 2412 - ph = 5,5 ± 0,5 - Viscosité Brookfield RV (mobile B, vitesse 5): environ 21 000 mpa.s après 24 h. This formula is presented in good faith, and we believe it is correct, but no warranty as to accuracy of results, or fitness for a particular use is given, nor is freedom from patent infringement to be inferred. It is offered solely for your consideration, investigation and verification. Cette formule correspond à notre meilleure connaissance et est fournie à titre indicatif. Elle n'implique aucune garantie de notre part en ce qui concerne l'emploi et les méthodes d'emploi de ladite formule et de ses ingrédients, ceci étant de la seule responsabilité des utilisateurs, qui devront en particulier vérifier qu'ils ne contreviennent pas à des brevets existants. Copyright GATTEFOSSÉ

21 st Century Hydrating Cream F-0047 In the 21 st century, time is money and sensory is a priority. This cream can be prepared in less than 5 minutes. It is simple, cost-effective, stable, and beautiful. Novemer * EC-2 Polymer is used as the primary emulsifier, thickener, and stabilizer in this ph 5.5 emulsion. It is also an efficient rheology and sensory modifier in this high electrolyte formula. Schercemol * CO Ester creates a pleasant glide between fingers and onto body without oily residue or afterfeel. Schercemol * NGDC Ester leaves skin feeling silky smooth. : INCI Name, Trade Name Weight % Function A. 1. Deionized Water 81.05 Diluent 2. Lactic Acid (90%), HiPure 90 3. Glycerin, Glycerin, 99.6% USP B. 4. DMDM Hydantoin (and) Iodopropynyl Butylcarbamate, Glydant Plus Liquid C. 5. Sodium Acrylates/Beheneth-25 Methacrylate Crosspolymer (and) Hydrogenated Polydecene (and) Lauryl Glucoside, Novemer * EC-2 Polymer (20 %TS) D. 6. Cetyl Ethylhexanoate, Schercemol * CO Ester 7. Neopentyl Glycol Dicaprate, Schercemol * NGDC Ester 8. Aloe Barbadensis Leaf Juice, Aloe Vera 10:1, #01-2113 9. Fragrance, Wild Orchid / White Tea Fragrance #91-1008-90 0.35 ph Adjuster 3.00 Humectant 0.40 Preservative 4.00 Rheology Modifier / Emulsion Stabilizer 5.00 Emollient 5.00 Emollient 1.00 Botanical Extract (Skin Conditioner) 0.20 Fragrance Product Properties: Appearance Opaque lotion ph 5.5 5.7 Viscosity (mpa s)** 15,000 21,000 Stability: Passed 3 months@ 45 C, 4 freeze / thaw cycles. Novemer * EC-2 Polymer (%TS) 0.80 Recommended Packaging: Qosmedix Airless pump **Brookfield RVT @ 20 rpm, RT, #6 spindle, measured at 24 hours Supplier References: Purac (2) Lonza (4) Lubrizol Advanced Materials, Inc. (Noveon * Consumer Specialties) (5, 6, 7) Concentrated Aloe Corporation (CAC) (8) Lebermuth (9) Procedure: 1. Combine PART A ingredients. Mix until uniform. 2. Add Glydant Plus Liquid to batch with mixing. Mix until uniform. 3. Add Novemer * EC-2 Polymer with mixing. Mix batch until polymer has fully hydrated. Adjust mixing speed as needed to maintain good vortex. Mix until uniform. 4. Add PART D ingredients individually to batch with good mixing in between additions. Mix until uniform. F-0047 Edition: September 22, 2011 Previous Edition: August 4, 2011 Reference #: 1460-011-10-1 (CSIM) Based on #LLN-002-03-37-MW-040122-1, October 14, 2005 Original Edition: March 17, 2011 For more information visit www.personalcare.noveon.com or contact your nearest Lubrizol Advanced Materials location. North America 9911 Brecksville Road Cleveland, OH 44141-3247 TEL: 216.447.5000 TEL: 800.379.5389 FAX: 216.447.5250 Mexico Avenida Interceptor Pte. #69 Parque Industrial La Joya Cuautitlán, Izcalli - Mexico City Edo. de México 54730, México TEL: 52.55.3067.0860 FAX: 52.55.5870.8956 Brazil Av. Fagundes Filho 134 - Cj. 101, 10th floor Edificio Victoria Office Center São Judas, 04304-010 São Paulo TEL: 55.11.4082.1330 FAX: 55.11.4082.1345 Europe, Middle East and Africa Chaussée de Wavre, 1945 B-1160 Brussels, Belgium TEL: 32.2.678.19.11 FAX: 32.2.678.20.02 Asia Pacific 1107-1110 Shui On Centre 6-8 Harbour Road Wanchai, Hong Kong TEL: 852.2508.1021 FAX: 852.2512.2241 South Asia 501 & 501A, Omega Hiranandani Business Park Powai Mumbai 400 076 India TEL: 91.22.6698.0590 / 91 FAX: 91.22.6602.7888 China 27/F Majesty Building No. 138 Pudong Avenue Shanghai 200120, PRC TEL: 86.21.3866.0366 FAX: 86.21.5887.6981 The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc. s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner. Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation Noveon is a registered trademark of The Lubrizol Corporation *Trademark owned by The Lubrizol Corporation Copyright 2011 Lubrizol Advanced Materials, Inc.

After Shave Balm for Sensitive Skin M-0006 This milky white emulsion is formulated with Pemulen * TR-1 Polymer as the primary emulsifier. SilSense * DW-18 Silicone serves to reduce particle size and improve emulsion stability. The overall low level of emulsifier makes this ideal for use on sensitive skin. In addition, the silicone ester helps to improve conditioning and sensory properties of the formulation. : INCI Name, Trade Name Weight % Function A. 1. Deionized Water 88.67 Diluent 2. Glycerin 3.00 Humectant 3. Allantoin 0.10 Soothing Agent Product Properties: Appearance Milky white emulsion ph 6.3 6.7 Viscosity (mpa s)** 7,200 8,000 Stability: Passed 3 months @ 45 C, 5 cycles freeze/thaw ** Brookfield DV 11+ (or RVT) @ 20 rpm, 25 C, #5 spindle 4. Dimethicone PEG-7 Isostearate, SilSense * DW-18 Silicone B. 5. Hydrogenated Polydecene, Silkflo 366 NF 6. Decyl Oleate, Cetiol V 7. Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Pemulen * TR-1 Polymer C. 8. Diazolidinyl Urea (and) Methylparaben (and) Propylparaben (and) Propylene Glycol, Germaben II-E D. 9. Aminomethyl Propanol, AMP-95 E. 10. Fragrance, Portrait 2.00 Particle Size Reducer/ Conditioning Agent 4.00 Emollient 0.50 Emollient 0.25 Polymeric Emulsifier 0.80 Preservative 0.18 Neutralizer 0.50 Perfume Supplier References: Protameen (2) Lubrizol Advanced Materials, Inc. (Noveon * Consumer Specialties) (4, 7) Amoco Chemical (5) Cognis (6) ISP (8) Dow (9) Holland Aromatics BV (10) Procedure: 1. PART A: Combine ingredients and mix until homogenous. 2. Combine PART B ingredients. Mix to break up any soft lumps of Pemulen * TR-1 Polymer. 3. Add PART B to PART A. Homogenize with Ultra Turrax for 30 sec. 4. Add PART C to PARTS A and B. 5. Neutralize with PART D under mixing. 6. Add PART E. Stir gently until homogenous. M-0006 (SIL-0008EU) Edition: November 2, 2007 Previous Edition: July 8, 2005 Notebook #F0101232 Original Edition: November 6, 2002 For more information visit www.personalcare.noveon.com or contact your nearest Lubrizol Advanced Materials location. North America 9911 Brecksville Road Cleveland, OH 44141-3247 TEL: 216.447.5000 TEL: 800.379.5389 FAX: 216.447.5250 Mexico Avenida Interceptor Pte. #69 Parque Industrial La Joya Cuautitlán, Izcalli - Mexico City Edo. de México 54730, México TEL: 52.55.3067.0860 FAX: 52.55.5870.8956 Brazil Av. Fagundes Filho 134 - Cj. 101, 10th floor Edificio Victoria Office Center São Judas, 04304-010 São Paulo TEL: 55.11.4082.1330 FAX: 55.11.4082.1345 Europe, Middle East and Africa Chaussée de Wavre, 1945 B-1160 Brussels, Belgium TEL: 32.2.678.19.11 FAX: 32.2.678.20.02 Asia Pacific 1107-1110 Shui On Centre 6-8 Harbour Road Wanchai, Hong Kong TEL: 852.2508.1021 FAX: 852.2512.2241 South Asia 501 Alpha Hiranandani Business Park Powai Mumbai 400 076 India TEL: 91.22.6698.0590 / 91 FAX: 91.22.6698.0599 China 27/F Majesty Building No. 138 Pudong Avenue Shanghai 200120, PRC TEL: 86.21.3866.0366 FAX: 86.21.5887.6981 The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc. s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner. Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation Noveon is a registered trademark of The Lubrizol Corporation *Trademark owned by The Lubrizol Corporation Copyright 2007 Lubrizol Advanced Materials, Inc.

Formules simples & naturelles

CREAMY EMULSION 1238-2.01 Phase Material Name INCI Supplier Properties % Material A DEMINERALIZED WATER WATER - - 75,65 B C D AVICEL PC 591 MICROCRYSTALLINE CELLULOSE, CELLULOSE GUM FMC BIOPOLYMER gelling 2,00 GLYCERIN GLYCERIN - moisturizing 3,00 SATIAXANE CX91 XANTHAN GUM CARGILL gelling 0,20 POLYGLYCERYL-6 DISTEARATE, EMULIUM MELLIFERA JOJOBA ESTERS, POLYGLYCERYL-3 GATTEFOSSE O/W emulsifier 3,00 BEESWAX, CETYL ALCOHOL CETEARYL ALCOHOL CETEARYL ALCOHOL - thickening 2,00 CETIOL OE DICAPRYLYL ETHER BASF emollient 5,00 SIMMONDSIA CHINENSIS (JOJOBA) SEED JOJOBA OIL - OIL emollient 3,00 LABRAFAC TM CC CAPRYLIC/CAPRIC TRIGLYCERIDE GATTEFOSSE emollient 5,00 PRESERVATIVE PRESERVATIVE - preservative 1,00 EXPRESSIONS PERFUME PRECIEUSE 0601579 PARFUM perfume PARFUMEES 0,15 100,00 Operating Instructions - Under rapid mixing (Rotor Stator 2 500 rpm), disperse Avicel PC591 into water for 10min. - Add premix B into A and heat to 75 C. Mix during 10 min. - Under mixing, add C heated to 75 C to A+B heated to 75 C. - Maintain rapid mixing (Rotor Stator 2 500 rpm) for 5-10 min. - Cool under mixing and at about 35 C, add the components of D. - Complete cooling. Trial Notes - Aspect : White cream - ph = 6.0+/-0.5 - Viscosity Brookfield RV (spindle B, Speed 5 ) : about 40 000mPa.s after 24H. This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided.

NAKED CREAM GEL 1305-1.09 Phase Material Name INCI Supplier Properties % Material A POLYGLYCERYL-6 DISTEARATE, JOJOBA EMULIUM MELLIFERA ESTERS, POLYGLYCERYL-3 BEESWAX, GATTEFOSSE O/W emulsifier 3,00 CETYL ALCOHOL MOD OCTYLDODECYL MYRISTATE GATTEFOSSE emollient 10,00 B DEMINERALIZED WATER WATER - - 80,35 GLYCERIN GLYCERIN - moisturizing 2,00 C HIFORM A 12747 STARCH HYDROXYPROPYL STARCH PHOSPHATE CARGILL gelling 2,50 RHEOZAN SH SUCCINOGLYCAN SACI gelling 0,50 KONJAC MANNAN GEL POWDER GLUCOMANNAN SACI gelling 0,50 C PRESERVATIVE PRESERVATIVE - preservative 1,00 PERFUME BEAUTY PARFUM FIRMENICH perfume 0,15 100,00 Operating Instructions - Under mixing, disperse Hiform A 12747 Starch into water and glycerin of phase B heated to 75 C. - Maintain mixing for about 10 min then under mixing, add Rheozan SH and Konjac Mannan Gel. - Prepare phase A and heat to 75 C. - Under rapid mixing (Rotor/Stator 3000 rpm), add A heated to 75 C to B heated to 75 C. - Maintain rapid mixing for about 10 min. - Cool under mixing and at about 35 C, add the ingredients of phase C. - Complete cooling. Trial Notes - Aspect : Bright cream - ph= 6.8 +/- 0.5 - Viscosity Brookfield RV (spindle C, speed 5) : approx. 82 000 mpa.s after 24H. This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided.

DELIGHT AND NOURISH 1356-1.11 Phase Material Name INCI Supplier Properties % Material A POLYGLYCERYL-6 DISTEARATE, JOJOBA EMULIUM MELLIFERA ESTERS, POLYGLYCERYL-3 BEESWAX, GATTEFOSSE O/W emulsifier 3,0 CETYL ALCOHOL MOD OCTYLDODECYL MYRISTATE GATTEFOSSE emollient 39,0 CETYL ALCOHOL CETYL ALCOHOL - thickening 1,5 B DEMINERALIZED WATER WATER - - 48,0 GLYCERIN GLYCERIN - moisturizing 6,0 AVICEL PC 591 MICROCRYSTALLINE CELLULOSE, CELLULOSE GUM FMC BIOPOLYMER gelling 1,0 SATIAXANE CX91 XANTHAN GUM CARGILL gelling 0,2 C PERFUME BEAUTY PARFUM FIRMENICH perfume 0,3 PRESERVATIVE PRESERVATIVE - preservative 1,0 100,0 Operating Instructions - Prepare B: Heat water to 75 C and under mixing add Avicel PC 591. - Continue mixing for about 15 min. - Add Satiaxane CX 91 under mixing. - Prepare and heat A to 75 C. - Under rapid mixing ( Rotor/Stator 3000rpm), add slowly A heated to 75 C to B heated to 75 C. - Maintain temperature at or below 75 C and mix for about 10 min. - Cool under mixing and at about 35 C, add C. - Complete cooling. Trial Notes - Aspect : white thick Lotion - ph= 5.2 +/- 0.5 - Viscosity Brookfield RV (spindle B, speed 5) : approx. 41 000 mpa.s after 24H. This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided.

Phase 1 EMULIUM KAPPA 2 (1) SOOTHING DAY CREAM JB 2730/A Ingredients INCI designation % W/W Ingredient Function CANDELILLA/JOJOBA/RICE BRAN POLYGLYCERYL-3 ESTERS (AND) GLYCERYL STEARATE (AND) CETEARYL ALCOHOL (AND) SODIUM STEAROYL LACTYLATE 4.50 O/W emulsifier CETIOL CC (2) DICAPRYLYL CARBONATE 15.00 Emollient CETYL ALCOHOL (2) CETYL ALCOHOL 2.00 Texture PRESERVATIVE 0.80 Preservative Phase 2 DEMINERALIZED WATER WATER 73.10 AVICEL PC 591 (3) MICROCRYSTALLINE CELLULOSE 2.00 Gelling (AND) CELLULOSE GUM SATIAXANE CX91 (4) XANTHAN GUM 0.20 Gelling Phase 3 GATULINE DERMA-SENSITIVE (1) PERFUME VOILE DE DOUCEUR CRE/01629 (5) OCTYLDODECYL MYRISTATE (AND) CAPPARIS SPINOSA FRUIT EXTRACT 2.00 Soothing 0.40 Perfume (1) GATTEFOSSE SAS / (2) BASF / (3) FMC / (4) CARGILL / (5) MLW 100,00 APPAREANCE: Ivory cream MANUFACTURING PROCESS: - Under mixing, disperse Vivapur Cos 5 then Satiaxane CX 91 into water of phase II heated to 75 C. - Prepare I and heat to 75 C. - Under rapid mixing (rotor/stator 3000 rpm), add I to II, maintain rapid mixing for about 10 min. - Cool under mixing and at about 35 C, add III. - Complete cooling PROPERTIES: - ph = 5.5 ± 0.5 - Viscosity Brookfield (spindle B speed 5) : approx. 40 000 mpa.s after 24H ASPECT: Crème ivoire MODE OPERATOIRE: - Sous agitation, disperser le Vivapur Cos 5 puis le Satiaxane CX 91 dans l'eau de II chauffée vers 75 C. - Préparer I et chauffer vers 75 C. - Sous agitation rapide (rotor/stator 3000 tr/min), ajouter I dans II, poursuivre l'agitation rapide pendant 10 min. - Refroidir sous agitation et vers 35 C, ajouter III. - Terminer le refroidissement. PROPRIÉTÉS: - ph = 5,5 ± 0,5 - Viscosité Brookfield (mobile B vitesse 5) : environ 40 000 mpa.s après 24H This formula is presented in good faith, and we believe it is correct, but no warranty as to accuracy of results, or fitness for a particular use is given, nor is freedom from patent infringement to be inferred. It is offered solely for your consideration, investigation and verification. Cette formule correspond à notre meilleure connaissance et est fournie à titre indicatif. Elle n'implique aucune garantie de notre part en ce qui concerne l'emploi et les méthodes d'emploi de ladite formule et de ses ingrédients, ceci étant de la seule responsabilité des utilisateurs, qui devront en particulier vérifier qu'ils ne contreviennent pas à des brevets existants. Copyright GATTEFOSSÉ

Formules bébé & enfant

EDIBLE MUM AND BABY BALM 1304-1.01 Phase Material Name INCI Supplier Properties % Material A COMPRITOL 888 CG GLYCERYL BEHENATE GATTEFOSSE oil gelling 5,0 GELEOL GLYCERYL STEARATE GATTEFOSSE thickening 5,0 HYDROGENATED CASTOR OIL HYDROGENATED CASTOR OIL - thickening 2,5 LIPOCIRE TM A SG C10-18 TRIGLYCERIDES GATTEFOSSE texture 10,0 LABRAFAC CC CAPRYLIC/CAPRIC TRIGLYCERIDE GATTEFOSSE emollient 72,5 B moisturizing GLYCERIN GLYCERIN - 5,0 100,0 Operating Instructions - Heat A to 85 C, maintain for 10 min and cool slowly under normal mixing. - At about 45 C increase the mixing speed (rotor/stator 2 500 rpm) - At 35 C add B then mix until completely cooled. - Aspect : white thick balm Trial Notes This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided.

MOISTURIZING BABY CREAM JB 2806/K Phase Material Name INCI Supplier Properties % Material A PLUROL STEARIQUE WL 1009 POLYGLYCERYL-6 DISTEARATE GATTEFOSSE O/W emulsifier 4,00 LIPOCIRE A C10-18 TRIGLYCERIDES GATTEFOSSE emollient feeling 3,00 texture MOD OCTYLDODECYL MYRISTATE GATTEFOSSE emollient 2,00 CETYL ALCOHOL CETYL ALCOHOL - thickening 1,50 JOJOBA ESTERS (AND) POLYGLYCERIN-3 moisturizing ACTICIRE (AND) HELIANTHUS ANNUUS SEED CERA (AND) GATTEFOSSE ACACIA DECURRENS FLOWER CERA texture 1,00 CETIOL OE DICAPRYLYL ETHER BASF emollient 7,00 B DEMINERALIZED WATER AQUA - 71,00 C D AVICEL PC 591 MICROCRYSTALLINE CELLULOSE (AND) CELLULOSE GUM FMC BIOPOLYMER gelling 2,00 GLYCERIN GLYCERIN - moisturizing 7,00 SATIAXANE CX91 XANTHAN GUM CARGILL gelling 0,20 PERFUME CAPUCINE NEW 0610482 EUXYL K 712 PARFUM SODIUM BENZOATE (AND) POTASSIUM SORBATE EXPRESSIONS PARFUMEES SCHULKE & MAYR perfume 0,30 preservative 1,00 100,00 Operating Instructions - Under mixing, disperse Avicel PC 591 into water of phase B heated to 75 C. - Maintain mixing for about 15 min. - Under mixing, add C to B and maintain mixing for about 5 min more. - Heat phase A to 75 C. - Under rapid mixing ( Rotor/Stator 3000 rpm), add A heated to 75 C to B+C heated to 75 C. - Maintain rapid mixing for about 10 min. - Cool under mixing at about 35 C, add phase D. - Complete cooling. Trial Notes Aspect: White cream ph = 6.6 ± 0.5 Viscosity Brookfield (spindle C speed 5) : approx. 135 000 mpa.s after 24H This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided. 1/1

Phase 1 W/O BABY CREAM MM 7516 Ingredients INCI designation % W/W Ingredient Function PLUROL DIISOSTEARIQUE CG (1) POLYGLYCERYL-3 DIISOSTEARATE 6.00 W/O emulsifier HYDROGENATED CASTOR OIL HYDROGENATED CASTOR OIL 1.00 Thickener WHITE PETROLEUM JELLY P 23 TF (2) PARAFFINUM LIQUIDUM (AND) CERA MICROCRISTALLINA (AND) PARAFFIN 24.00 Emollient MOD (1) OCTYLDODECYL MYRISTATE 5.00 Emollient PRESERVATIVE 0.50 Preservative Phase 2 DEMINERALIZED WATER WATER 22.50 SODIUM CHLORIDE, CODEX SODIUM CHLORIDE 0.50 Stabilizer MAGNESIUM SULFATE 7H2O, CODEX (3) MAGNESIUM SULFATE 0.50 Stabilizer Phase 3 ZINC OXIDE (4) ZINC OXIDE 40.00 Healing 100,00 (1) GATTEFOSSE SAS / (2) AIGLON S.A. / (3) MERCK / (4) COOPERATIVE PHARMAC.FRANCAISE APPAREANCE: Bright white cream MANUFACTURING PROCESS: - Under vacuum and rapid stirring (3000 rpm), add II heated to 75 C to I heated to 85 C. - Maintain rapid stirring for 10 min and add Zinc Oxide. - Continue rapid stirring until homogeneous. - Cool under moderate stirring (1500 rd/mn). PROPERTIES: - Viscosity Brookfield RV (spindle C, speed 5) : approx. 126 000 mpa.s after 24h. ASPECT: Crème blanche brillante MODE OPERATOIRE: - Sous vide et sous agitation rapide (3000 tr/min), ajouter II chauffé à 75 C à I chauffé à 85 C. - Maintenir sous agitation rapide pendant 10 mn et ajouter l'oxyde de Zinc. - Poursuivre l'agitation rapide jusqu'à complète homogénéité. - Refroidir sous agitation modérée (1500tr/mn). PROPRIÉTÉS: - Viscosité Brookfield RV (mobile C, vitesse 5) : environ 126 000 mpa.s après 24h. This formula is presented in good faith, and we believe it is correct, but no warranty as to accuracy of results, or fitness for a particular use is given, nor is freedom from patent infringement to be inferred. It is offered solely for your consideration, investigation and verification. Cette formule correspond à notre meilleure connaissance et est fournie à titre indicatif. Elle n'implique aucune garantie de notre part en ce qui concerne l'emploi et les méthodes d'emploi de ladite formule et de ses ingrédients, ceci étant de la seule responsabilité des utilisateurs, qui devront en particulier vérifier qu'ils ne contreviennent pas à des brevets existants. Copyright GATTEFOSSÉ

Mommy n Me Sprayable Liquid Powder O-0005(EU) This emulsion leaves a smooth, soft feel on the skin and can be applied in a spray form. Pemulen * TR-2 Polymer stabilizes the suspended tapioca starch. SilSense * DW-18 Silicone imparts a protective conditioning film and helps Pemulen * TR-2 Polymer in stabilizing the lotion. : INCI Name, Trade Name Weight % Function A. 1. Deionized Water 80.50 Diluent 2. Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Pemulen * TR-2 Polymer B. 3. Disodium EDTA, Protacide NA-2 4. Tapioca Starch, Tapioca Pure 0.15 Polymeric Emulsifier 0.05 Chelating Agent 10.00 Soothing Agent C. 5. Isostearyl Isostearate 4.00 Emollient 6. Octyldodecyl Myristate, M.O.D. 7. Dimethicone PEG-7 Isostearate, SilSense * DW-18 Silicone 8. Tocopheryl Acetate, Vitamin E Acetate 9. Phenoxyethanol, Methyl-, Ethyl-, Butyl-, Propyl-, and Isobutylparaben, Phenonip 2.00 Emollient 2.00 Conditioner 0.50 Antioxidant 0.50 Preservative D. 10. Triethanolamine (99%) 0.20 Neutralizer E. 11. Fragrance, Floresse BG 0.10 Fragrance Procedure: 1. PART A: Disperse Pemulen * TR-2 Polymer into deionized water at room temperature. 2. Add PART B ingredients in order to PART A. Mix until homogeneous. 3. In a separate vessel, combine PART C ingredients. 4. Add PART C to PARTS A and B. 5. Homogenize (use Ultra Turrax for 30 seconds) / neutralize with Triethanolamine immediately. 6. Stir slowly. Add PART E. Product Properties: Appearance Thin, white lotion ph 6.0 6.5 Viscosity (mpa s)** 950 1,200 Stability: Passed 3 months @ 45 C, 5 cycles freeze/thaw ** Brookfield DV - II+ (or RVT) @ 20 rpm, 25 C, # 2 spindle NOTE: Recommended sprayer is supplied by Seaquist Dispersing GmbH, Germany. Pump type: PZ2-190 DL with STH Nozzle type: 4027 Hildebrandstrasse 20, 44319 Dortmund (Wickede) Tel. 02 31 92 40-0 Fax. 02 31 21 17 52 Supplier References: Lubrizol Advanced Materials, Inc. (Noveon * Consumer Specialties) (2, 7) Protameen (3) National Starch (4) Gattefossé (6) BASF (8) Clariant (9) Ashland (10) Holland Aromatics BV (11) O-0005(EU) (EU-0023) Edition: 3/16/09 Reference #: F00626.3 Previous Editions: 0-0005 (EU-0023) 9/26/08, 7/8/05 Original Edition: 10/10/01 For more information visit www.personalcare.noveon.com or contact your nearest Lubrizol Advanced Materials location. North America 9911 Brecksville Road Cleveland, OH 44141-3247 TEL: 216.447.5000 TEL: 800.379.5389 FAX: 216.447.5250 Mexico Avenida Interceptor Pte. #69 Parque Industrial La Joya Cuautitlán, Izcalli - Mexico City Edo. de México 54730, México TEL: 52.55.3067.0860 FAX: 52.55.5870.8956 Brazil Av. Fagundes Filho 134 - Cj. 101, 10th floor Edificio Victoria Office Center São Judas, 04304-010 São Paulo TEL: 55.11.4082.1330 FAX: 55.11.4082.1345 Europe, Middle East and Africa Chaussée de Wavre, 1945 B-1160 Brussels, Belgium TEL: 32.2.678.19.11 FAX: 32.2.678.20.02 Asia Pacific 1107-1110 Shui On Centre 6-8 Harbour Road Wanchai, Hong Kong TEL: 852.2508.1021 FAX: 852.2512.2241 South Asia 501 & 501A, Omega Hiranandani Business Park Powai Mumbai 400 076 India TEL: 91.22.6698.0590 / 91 FAX: 91.22.6602.7888 China 27/F Majesty Building No. 138 Pudong Avenue Shanghai 200120, PRC TEL: 86.21.3866.0366 FAX: 86.21.5887.6981 The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc. s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner. Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation Noveon is a registered trademark of The Lubrizol Corporation *Trademark owned by The Lubrizol Corporation Copyright 2009 Lubrizol Advanced Materials, Inc.

PEG-Free Emulsion for Baby Wipe (Starting Point Formula) W-0001(EU) This easy-to-formulate, PEG-Free emulsion is a starting point formula for baby wipes. Glucate * DO Emulsifier, a vegetable-derived emulsifier, is combined with Pemulen * TR-2 Polymer and Coco-Glucoside to afford efficient co-stabilization in a simple cold process. Schercemol * 1818 Ester, also derived from vegetable sources, provides emolliency and a soft afterfeel to this emulsion for gentle, yet effective cleansing wipes. : INCI Name, Trade Name Weight % Function A. 1. Deionized Water 39.03 Diluent 2. Glycerin 5.00 Humectant B. 3. Isostearyl Isostearate, Schercemol * 1818 Ester 4. Bisabolol, (-)Alpha-Bisabolol Natural 2.00 Emollient 0.20 Skin Conditioner Product Properties: Appearance Thin white lotion ph 5.8 6.2 Viscosity (mpa s)** 400 700 Stability: Passed 3 months @ 45 C and RT, Passed 5 cycles freeze / thaw ** Brookfield RVT @ 20 rpm, 25 C, #2 spindle, measured after 24 hours 5. Tocopheryl Acetate, Vitamin E Acetate 6. Methyl Glucose Dioleate, Glucate * DO Emulsifier 7. Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Pemulen * TR-2 Polymer 0.20 Antioxidant 0.20 Co-Emulsifier 0.12 Rheology Modifier / Emulsion Stabilizer Comments: 1. This formula has not been tested on any non-woven substrate, but is a suggested starting point formulation to help meet difficult viscosity and emulsion stability criteria. Preservation and stability may be dependant on the non-woven substrate that is used for application. C. 8. Sodium Hydroxide (5%) 0.25 Neutralizer D. 9. Coco-Glucoside (50%), Plantacare 818 UP E. 10. Phenoxyethanol (and) Ethylhexylglycerin, Euxyl PE 9010 2.00 Mild Surfactant 1.00 Preservative F. 11. Deionized Water 50.00 Diluent Procedure: Supplier References: Protameen (2, 5) Lubrizol Advanced Materials, Inc. (Noveon * Consumer Specialties) (3, 6, 7) Symrise (4) Cognis (9) Schülke & Mayr (10) 1. PART A: Add Glycerin to Deionized Water. 2. PART B: add ingredients 3-6 in a separate vessel. Disperse Pemulen * TR-2 Polymer into oil phase. 3. Add PART B to PART A. Mix for 20-30 minutes to allow the polymer to swell. 4. Neutralize batch with Sodium Hydroxide (5%). Mix vigorously until uniform. 5. Add Coco-Glucoside. Mix slowly to avoid air entrapment. 6. Add preservative (ingredient #10). Mix until uniform. 7. Dilute with Deionized Water. Mix until uniform. W-0001(EU) Edition: July 7, 2009 Reference # 081016-04FP, LLN-014-06 (FPC) Original Edition: June 15, 2009 For more information visit www.personalcare.noveon.com or contact your nearest Lubrizol Advanced Materials location. North America 9911 Brecksville Road Cleveland, OH 44141-3247 TEL: 216.447.5000 TEL: 800.379.5389 FAX: 216.447.5250 Mexico Avenida Interceptor Pte. #69 Parque Industrial La Joya Cuautitlán, Izcalli - Mexico City Edo. de México 54730, México TEL: 52.55.3067.0860 FAX: 52.55.5870.8956 Brazil Av. Fagundes Filho 134 - Cj. 101, 10th floor Edificio Victoria Office Center São Judas, 04304-010 São Paulo TEL: 55.11.4082.1330 FAX: 55.11.4082.1345 Europe, Middle East and Africa Chaussée de Wavre, 1945 B-1160 Brussels, Belgium TEL: 32.2.678.19.11 FAX: 32.2.678.20.02 Asia Pacific 1107-1110 Shui On Centre 6-8 Harbour Road Wanchai, Hong Kong TEL: 852.2508.1021 FAX: 852.2512.2241 South Asia 501 & 501A, Omega Hiranandani Business Park Powai Mumbai 400 076 India TEL: 91.22.6698.0590 / 91 FAX: 91.22.6602.7888 China 27/F Majesty Building No. 138 Pudong Avenue Shanghai 200120, PRC TEL: 86.21.3866.0366 FAX: 86.21.5887.6981 The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc. s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner. Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation Noveon is a registered trademark of The Lubrizol Corporation *Trademark owned by The Lubrizol Corporation Copyright 2009 Lubrizol Advanced Materials, Inc.

Soins spécifiques

CLOUD MASK JB 2840/H Phase Material Name INCI Supplier Properties % Material A DEMINERALIZED WATER WATER - 84,80 MAKIMOUSSE 25 SODIUM POLYACRYLATE STARCH DAITO KASEI texture 0,50 B CETYL ALCOHOL (AND) GLYCERYL EMULIUM DELTA STEARATE (AND) PEG-75 STEARATE (AND) GATTEFOSSE O/W emulsifier 2,00 CETETH-20 (AND) STEARETH-20 LABRAFAC CC CAPRYLIC/CAPRIC TRIGLYCERIDE GATTEFOSSE emollient 10,00 energizing PHYLDERM VEGETAL C2 HYDROLYZED SOY PROTEIN GATTEFOSSE nourishing 1,50 C PERFUME LIN ET COTON PARFUM - perfume 0,20 PHENOXYETHANOL PHENOXYETHANOL - preservative 0,90 ETHYLHEXYLGLYCERIN ETHYLHEXYLGLYCERIN - preservative 0,10 100,00 Operating Instructions - Under rapid mixing, add Makimousse 25 to water of phase A heated to 75 C, maintain rapid mixing for about 10 min. - Heat phase B to 75 C. - Under rapid mixing (Rotor/Stator 3000 rpm), add B to A. - Maintain rapid mixing for about 10 min. - Cool under mixing and at about 35 C, add the ingredients of phase C. - Complete cooling. Trial Notes - Aspect: Foamy cream - ph = 7.0 ± 0.5 - Viscosity Brookfield (spindle C speed 5) : approx. 72 000 mpa.s after 24H This formula is presented in good faith, however, no warranty as to the accuracy or completeness of results, or fitness for a particular use is given, nor is freedom from the infringement of any intellectual/industrial property rights to be inferred. It is provided "as is" for your consideration, investigation and verification. To the extent permissible by applicable law, Gattefossé shall in no way be liable for any reliance upon information or materials provided. 1/1

Translucent Skin Toner O-0050B(AP) This toner is ideal to be used after the skin is washed and before using other cosmetic preparations. It tones and relaxes the skin with its refreshing, moisturizing and nourishing properties. Pemulen * TR-2 polymeric emulsifier offers excellent stability to this low viscosity milky toner with 6% emollient esters. The distinct emulsification property of Pemulen * TR-2 polymeric emulsifier contributes to the watery refreshing burst as the toner is being applied on the skin and also offers a non-tacky, low-residue afterfeel. The combination of Schercemol * NGDO, SHS, 318 and DISD esters, offers a cascading emolliency which leaves the skin with a cushiony, smooth feel. This combination of esters also aids skin hydration and prevents skin dryness by replenishing the lipids that are removed by frequent washing. INCI Name, Trade Name Weight % Function A. 1. Isostearyl Hydroxystearate, 0.75 Emollient Schercemol * SHS Ester 2. Diisostearyl Dimer Dilinoleate, 0.75 Emollient Schercemol * DISD Ester 3. Isopropyl Isostearate, 1.50 Emollient Schercemol * 318 Ester 4. Neopentyl Glycol Diethylhexanoate, 3.00 Emollient Schercemol * NGDO Ester B. 5. Acrylates/C10-30 Alkyl Acrylate Crosspolymer, 0.12 Emulsifier Pemulen * TR-2 Polymeric Emulsifier C. 6. Deionized Water 93.66 Diluent 7. Disodium EDTA 0.04 Chelating Agent D. 8. Sodium Hydroxide (18%) 0.12 Neutralizer E. 9. Methylisothiazolinone (and) Ethylhexylglycerin (and) Water, Euxyl K 220 0.06 Preservative Product Properties: Appearance Milky liquid, applies translucent ph 5.5 6.5 Viscosity (mpa s)** 400 900 Stability: Passed 3 months @ 25 & 45 C, Passed 5 freeze/thaw cycles Polymer (%TS) 0.12 ** Brookfield RVT Viscometer spindle #2 @ 30 rpm, @ 60 s Supplier References: Lubrizol Advanced Materials, Inc. (1, 2, 3, 4, 5) Schülke & Mayr GmbH (9) Procedure: 1. PART A: Add all the ingredients to the main vessel, heat to 48~52 C with gentle mixing. 2. Disperse Pemulen * TR-2 polymeric emulsifier in PART A. Mix until uniform with no lumps maintaining temperature of 48~52 C. 3. PART C: In a side vessel, dissolve Disodium EDTA in the solution of Deionized Water with mixing @ 45~50 C. 4. Add PART C to main batch with mixing, maintaining temperature of 48~52 C. Mix until uniform. 5. Mix batch at high speed for 10 minutes, while maintaining temperature of 48~52 C. 6. Cool batch to 40 C with mixing. 7. Neutralize batch with Sodium Hydroxide (18%) with high speed mixing. Mix until uniform. 8. Decrease mixing speed and continue cooling to 35 C. 9. Add ingredient 9 to batch with mixing. Mix until uniform. O-0050B(AP) Based on O-0050(AP) Edition: March 13, 2012 Previous Editions: 2/15/2012, 1/5/2012 Reference #: SG1469-001-11-005 (POMA) Original Edition: December 16, 2011 O-0050(AP):Original Reference #: SG1469-001-11-009(POMA) O-0050 Original Edition: October 14, 2011 Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000 The information contained herein is being furnished for in combination with other substances or in User s LIMITED TO, THE IMPLIED WARRANTIES OF informational purposes only, upon the express condition process. Due to the variations in methods, conditions MERCHANTABILITY OR FITNESS FOR A that the User makes its own assessment of the appropriate use of such information. While the information contained and equipment used commercially in processing these materials, no warranties or guarantees are made as to PARTICULAR PURPOSE. It is the User s sole responsibility to determine if there are any issues herein is believed to be reliable, no representations, the suitability of the information/products for the relating to patent infringement of any component or guarantees or warranties of any kind are made as to its accuracy, suitability for a particular application or the results to be obtained herefrom. Lubrizol Advanced applications disclosed. Lubrizol shall not be liable and the User assumes all risk and responsibility for, any use or handling of any material beyond Lubrizol's direct combination of components relating to the supplied information. Nothing contained herein is to be considered as permission, recommendation, nor as Materials, Inc. ("Lubrizol") cannot guarantee how any control. LUBRIZOL MAKES NO WARRANTIES, an inducement to practice any patented invention products associated with this information will perform EXPRESS OR IMPLIED, INCLUDING, BUT NOT without the permission of the patent owner. For further information, please visit: www.lubrizol.com/personalcare Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation *Trademark owned by The Lubrizol Corporation Copyright 2012 / The Lubrizol Corporation