MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

GELATIN SOLUTION, 5% ph 3.2

Material Safety Data Sheet POTASSIUM FERROCYANIDE

SILVER NITRATE, 5% AQUEOUS

POTASSIUM FERROCYANIDE, 2%

SILVER NITRATE, 10% AQUEOUS

SAFETY DATA SHEET MED-NAP. Ingredient list Cas # % Benzalkonium Chloride % Methyl chloro isothiazolinone

Material Safety Data Sheet Potassium Chloride Solutions. Section 1 - Chemical Product and Company Identification

J. B. Jewitt Co., Inc. Homestead Finishing Products 1935 West 96 th Street Unit Q Cleveland OH Telephone: (216)

SAFETY DATA SHEET LUGOL S IODINE (Weigert s Iodine)

Alizarin Red S, 1%, AQUEOUS ph 5.5

CRYSTAL VIOLET, 1% AQUEOUS

Safety Data Sheet ACID FUCHSIN, 1% IN 1% ACETIC ACID

SAFETY DATA SHEET FERRIC CHLORIDE, 10%, AQUEOUS

CONGO RED, 0.5%, AQUEOUS

GHS Classifications. Health Hazards. Physical Hazards:

Material Safety Data Sheet Bromocresol Green-Methyl Red, APHA. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Zinc, Granular. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET SECTION 1 - PRODUCT INFORMATION SUPERPLASTICIZER SECTION 2 - HAZARD IDENTIFICATION

SODIUM BICARBONATE, 5% AQUEOUS

Material Safety Data Sheet Sodium Nitrate, 5.0M. Section 1 - Chemical Product and Company Identification

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE

LITHIUM CARBONATE, 0.05% AQUEOUS

Material Safety Data Sheet Sodium Carbonate Solutions. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET POTASSIUM PERMANGANATE, 1% AQ.

Safety Data Sheet GALLEGO S DIFFERENTIATING SOLUTION. GHS Classifications HEALTH HAZARDS. Section 1 - Chemical Product and Company Identification

SODIUM CHROMATE, 10%

Section 1 - Chemical Product and Company Identification. Section 2 - Composition, Information on Ingredients

Material Safety Data Sheet

Material Safety Data Sheet Sodium Bicarbonate Solutions. Section 1 - Chemical Product and Company Identification

SCRUBBING BUBBLES ACTION SCRUBBER - TUB & SHOWER FOR SOAP SCUM

MATERIAL SAFETY DATA SHEET JAMO Waterproof Waterproofing Membrane

FANTASTIK ALL PURPOSE CLEANER WITH BLEACH

Material Safety Data Sheet Carbon Standard, 1000 ppm, Inorganic. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET. 1. Product and Company Identification. 2. Hazards Identification

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Bromocresol Purple, Sodium Salt. Section 1 - Chemical Product and Company Identification

BREWER SCIENCE INC. MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Magnesium Sulfate, 2.25%, APHA. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET Aqua Mix Grout Deep Clean

SAFETY DATA SHEET. Ammonium Oxalate Solution Manufacture of other chemical products, professional, sc ientific, and technical activities. None known.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Picric acid, Saturated. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET. Recommended use: External use only. Antiseptic

SAFETY DATA SHEET PHOSPHOMOLYBDIC ACID-ORANGE G SOLUTION

MATERIAL SAFETY DATA SHEET

Cen-Pe-Co Worm Gear Oil with Moly Page 1 of 5 10/28/08 MATERIAL SAFETY DATA SHEET

ACGIH TLV mg/m3. OSHA PEL mg/m3

% GHS Classification: EINECS-No Water / >85% Not Hazardous Glycerin (Glycerol) /

SECTION 1 - CHEMICAL PRODUCTS & COMPANY IDENTIFICATION

SAFETY DATA SHEET Phosphate Buffer, ph 6.5

MATERIAL SAFETY DATA SHEET Weiman Granite Cleaner and Polish

Material Safety Data Sheet Oxalic Acid - 10% Solution MSDS

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Part # MSDS #:

FANTASTIK SCRUBBING BUBBLES ALL PURPOSE CLEANER BLEACH 5-IN-1

MATERIAL SAFETY DATA SHEET Weiman Leather Wipes

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Woodstain Scarlet-Acid Fuchsin Sol n

MATERIAL SAFETY DATA SHEET Bedbug Killer Spray Last Updated November 11, 2010

Chemical Name: WypAll. Manufacturer: Kimberly-Clark Professional. Container Size: 220 Wipes. Location: VLA. Disposal: Place empty container in trash.

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Nitrate-Nitrogen Standard, 1000ppm. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET POTASSIUM HYDROXIDE 10%

BIG WIPES 4X4 SAFETY DATA SHEET

SAFETY DATA SHEET ALCIAN BLUE, 1%, Aqueous

Material Safety Data Sheet Conductivity Standards. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. 1. Product and Company Identification. 2. Hazards Identification

SAFETY DATA SHEET Conforms with OSHA Hazard Communication Standard (CFR ) HazCom 2012

SAFETY DATA SHEET PONCEAU ACID FUCHSIN

MATERIAL SAFETY DATA SHEET. 1. Product and Company Identification. 2. Hazards Identification

MATERIAL SAFETY DATA SHEET Pro Spec 035 Level Set Primer Plus

MATERIAL SAFETY DATA SHEET

24 Hour Emergency Response Information Underground Technologies LLC CHEMTREC: (800) UGT Phone: (248) UGTContact: David Wahl

Material Safety Data Sheet Hydrogen Peroxide, 2-3% w/w. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET Rubber & Vinyl Dressing

GHS Classifications. Safety Data Sheet POTASSIUM HYDROXIDE. Health Hazards. Physical Hazards. Environmental Hazards

SAFETY DATA SHEET ANILINE BLUE-ORANGE G SOLUTION

SAFETY DATA SHEET SECTION I- PRODUCT AND COMPANY IDENTIFICATION SECTION II- HAZARDS IDENTIFICATION

Section 1 - Chemical Product and Company Identification. Section 2 - Hazards Identification

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET TOLUIDINE BLUE, 0.2% AQUEOUS

MATERIAL SAFETY DATA SHEET

SDS for Product: Pearlgel Deodorant, Rev. Date: 12 December Sheet No. 83 Revision Date: 12 December 2017

MATERIAL SAFETY DATA SHEET Grout Release

Issue Date 11-Jan-2005 Revision Date: 09-Sep-2017 Version 4 1. IDENTIFICATION

1 PRODUCT AND COMPANY IDENTIFICATION 2 HAZARD(S) IDENTIFICATION SAFETY DATA SHEET GHS CLASSIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Sodium hydroxide solutions, 1-50% Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET Aqua Mix Penetrating Sealer

DELIMER NON-CORROSIVE LIME SCALE REMOVER. Use only for the purpose on the product label.

: SHOUT WIPES INSTANT STAIN REMOVER

Transcription:

AMERICAN REGENT, INC. MATERIAL SAFETY DATA SHEET Section 1: PRODUCT AND COMPANY INFORMATION Luitpold Pharmaceuticals, Inc. Chemtrec 24/7 Emergency Telephone Number P.O. Box 9001 Domestic North America: (800) 424-9300 Shirley, New York 11967 International: +1 703-527-3887 (800) 645-1706 (631) 924-4000 PRODUCT NAME: Sodium Thiosulfate Injection, USP PRODUCT CODE (NDC): 10% Solution: 0517-1019-05 25% Solution: 0517-5019-01 Section 2: HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Appearance / Odor Clear, colorless solution. WARNING! Skin, eye, respiratory and gastrointestinal irritant Toxicity to fish/aquatic organisms Causes irritation of the eyes, skin, gastrointestinal and respiratory tract. Product is not known to be toxic to fish. Potential Health Effects: See Section 11 for more information Likely Routes of Exposure Eye Skin Inhalation Ingestion Skin Absorption Medical Conditions Aggravated by Exposure Target Organs Eye contact, skin contact, inhalation and ingestion. Causes irritation of the eye. Causes irritation of the skin. Causes irritation of the respiratory tract. Causes irritation of the gastrointestinal tract. Not absorbed through the skin. None. Eyes, skin, respiratory tract and gastrointestinal tract. continued on next page Luitpold Pharmaceuticals, Inc. American Regent 1 of 7

Section 2: HAZARDS IDENTIFICATION (continued) Potential Environmental Effects: This product is not known to be toxic to fish. See Section 12 for more information This product does not contain any carcinogens or potential carcinogens as listed by OSHA, IARC or NTP. This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Section 3: COMPOSITION AND INFORMATION ON INGREDIENTS Component CAS Number Percentage (%) by Weight Sodium Thiosulfate Sodium Borate Water for Injection 10102-17-7 1303-96-4 7732-18-5 10 to 25 percent used for ph adjustment 75 to 90 percent Section 4: FIRST AID MEASURES Eye Contact Causes eye irritation. Flush for 15 minutes with copious quantities of water. Seek medical attention. Skin Contact Inhalation Ingestion Injection Causes skin irritation. Remove contaminated clothing. Flush area with copious quantities of water for 15 minutes. Seek medical attention. Causes irritation of respiratory tract. Remove person to fresh air. Remove contaminated clothing. Seek medical attention. Causes irritation of the gastrointestinal tract. Flush mouth out with water. Seek medical attention. See prescribing information. Section 5: FIRE FIGHTING MEASURES Suitable Extinguishing Media Water spray, foam, dry chemical or Carbon Dioxide (CO 2 ). Caution: CO 2 will displace air in confined spaces and may cause an Oxygen deficient atmosphere. Unsuitable Extinguishing Media None. Hazardous Combustion Products When heated, Sodium Thiosulfate solution thermally decomposes to form toxic vapors. (i.e. Hydrogen Sulfide, oxides of Sodium and Sulfur). Protection for Firefighters: Sodium Thiosulfate solution thermally decomposes to form toxic vapors. Vapors may be irritating to eyes and skin and toxic to respiratory tract. Firefighters are to wear selfcontained breathing apparatus (SCBA) and full turn out gear (Bunker gear). Cool containers with water spray and use caution when approaching. Luitpold Pharmaceuticals, Inc. American Regent 2 of 7

Section 6: ACCIDENTAL RELEASE MEASURES Personnel Precautions Use personal protective equipment recommended in Section 8 of this document and isolate the hazard area. Environmental Precautions Methods of Containment Methods of Clean Up Other Information This material is not considered a water pollutant. However, it is recommended to prevent spilled or leaking material from entering waterways. Minimize the use of water to prevent environmental contamination. Absorb material with suitable materials such as clay absorbent or absorbent pads for aqueous solutions. Vacuum spillage with a vacuum cleaner having a high efficiency particulate (HEPA) filter, or absorb liquid with clay absorbent, absorbent pads or paper towels. Use plastic tools to scoop up, sweep or containerize spilled material. Use plastic drums to contain spilled materials. Wipe working surfaces to dryness, and then wash with soap and water. A spill of this material does not need to be reported to the National Response Center. Section 7: HANDLING AND STORAGE Handling: As a general rule, when handling pharmaceutical products, avoid all contact and inhalation of mists or vapors associated with the product. Avoid contact with skin, eyes or clothing. Do not mix with other drugs. Use in a well ventilated area. Wash thoroughly after handling. Storage: Store in a well ventilated area. Keep containers closed when not in use. Product residue may remain in empty containers. Observe all label precautions until container is cleaned, discarded or destroyed. Luitpold Pharmaceuticals, Inc. American Regent 3 of 7

Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Guidelines OSHA PEL ACGIH TLV OTHER Sodium Thiosulfate Sodium Borate Water for Injection Personal Protective Equipment Description Ventilation Local exhaust or general ventilation is recommended. Respiratory Protection Eye Protection Skin Protection Under normal conditions of product use, respiratory protection is not required. When required, use a NIOSH approved air purifying respirator with P-100 / organic vapor / acid gas cartridges. Wear ANSI approved chemical splash goggles or safety glasses. When administering this product to patients, wear nitrile or latex gloves. Use Tyvek SL or equivalent coveralls, PVC booties and nitrile gloves for clean up activities. Section 9: PHYSICAL AND CHEMICAL PROPERTIES Color Clear, colorless solution Odor / Odor Threshold Odorless Physical State Liquid ph 6.0 to 9.5 Freezing Point Approximately 32 degrees Fahrenheit Boiling Point Approximately 212 degrees Fahrenheit Flash Point Not applicable Evaporation Rate Not applicable Flammability Nonflammable, noncombustible Upper Flammable Limit Not applicable Lower Flammable Limit Not applicable Vapor Pressure Not applicable Vapor Density Not applicable Specific Gravity Approximately 1.1 Solubility (water) Freely soluble in water Partition Coefficient Not applicable Auto-ignition Temperature Not applicable Percent Volatile 0 percent Volatile Organic Compounds (%) 0 percent Luitpold Pharmaceuticals, Inc. American Regent 4 of 7

Section 10: STABILITY AND REACTIVITY Stability Stable. Conditions to Avoid Incompatible Materials Hazardous Decomposition Products Possibility of Hazardous Reactions Do not mix with other drugs. Avoid heat, light and humidity. Keep away from flames, thermally decomposes to form toxic vapors. Reactive with, halogens, metals, strong acids and oxidizers. Hydrogen Sulfide, oxides of Sulfur and Sodium may be released by thermal decomposition. Hazardous polymerization will not occur. Section 11: TOXICOLOGY INFORMATION Acute Effects Oral (LD 50 ) No data available Intravenous (LD 50 ) Intraperitoneal (LD 50 ) LD 50 : LD 50 : LD 50 : 2350 mg/kg intravenous - mouse 2500 mg/kg intravenous - rat 5600 mg/kg intraperitoneal - mouse Subcutaneous (LD 50 ) Dermal (LD 50 ) Inhalation Eye Irritation Skin Irritation Sensitization No data available No data available Respiratory irritation is possible. Eye irritation is possible. Skin irritation is possible. Exposure may result in skin sensitivity. Chronic Effects Organ Systems Carcinogenicity Mutagenicity Chronic exposure may lead to dermatitis. Not considered carcinogenic. No adequate and well controlled studies in humans concerning the carcinogenic effects of Sodium Thiosulfate have been conducted. Sodium Thiosulfate was found to be mutagenic in bacteria and yeast. No adequate and well controlled studies in humans concerning the mutagenic effects of Sodium Thiosulfate have been conducted. continued on next page Luitpold Pharmaceuticals, Inc. American Regent 5 of 7

Section 11: TOXICOLOGY INFORMATION (continued) Reproductive Effects Sodium Thiosulfate is considered a reproductive hazard. No adequate and well controlled studies in humans concerning the reproductive effects of Sodium Thiosulfate have been conducted. Developmental Effects Not considered teratogenic. No adequate and well controlled studies in humans concerning the teratogenic effects of Sodium Thiosulfate have been conducted. Classified as Pregnancy Category C. Section 12: ECOLOGICAL INFORMATION Ecotoxicity No data available. Persistence / Degradability Bioaccumulation / Accumulation Mobility in Environment Short term products of biodegradation are not likely. No data available on the long term degradation of the product. No applicable bioaccumulation is expected in the environment. Appreciable volatilization is not expected into the air. Freely mobile in the aquatic environment. Section 13: DISPOSAL CONDITIONS Disposal Do not mix with other substances. Dispose of in accordance with Federal, state and local regulations. Contact your state or local government environmental and / or sanitation department for guidance on disposal. Section 14: TRANSPORTATION INFORMATION Regulatory Agency Shipping Description US DOT (ground) Canadian TDG (ground) IATA (air) Not considered a DOT regulated material - Non hazardous for shipment. See US DOT. Not considered a DOT regulated material - Non hazardous for shipment. Luitpold Pharmaceuticals, Inc. American Regent 6 of 7

Section 15: REGULATORY INFORMATION STATE RIGHT TO KNOW Refer to the applicable state to determine applicability. California Safe Drinking Water & Toxic Enforcement Act (Prop 65) RTECS Number TSCA NFPA Rating WHMIS (Canada) This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins under California Proposition 65. Sodium Thiosulfate - WE6660000 8b Inventory - Sodium Thiosulfate Health - 2, Fire - 0, Reactivity - 0 Not controlled Section 16: OTHER INFORMATION Sodium Thiosulfate Injection, USP is indicated for the treatment of cyanide poisoning. Refer to Luitpold / American Regent s prescribing information for further information at http://www.americanregent.com/product_index.asp Prepared By: Christopher Seniuk CIH CSP The information above is believed to be accurate and represents the best information currently available to American Regent. The information has not been verified and we cannot, therefore, guarantee its accuracy or completeness or adequacy for all persons and situations or as to the results to be obtained by use of the information. It is the user s obligation to evaluate and use this product safely and to comply with all applicable laws and regulations. WE MAKE NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WITH RESPECT TO SUCH INFORMATION AND WE ASSUME NO LIABILITY RESULTING FROM ITS USE. Users should make their own investigations to determine the suitability of the information for their own particular purposes. The user assumes all risks from use of the product. In no event shall Luitpold, its subsidiaries, its affiliates and its contractors be liable for any claims, losses or damages of any third party, or for lost profits, or for any special, indirect, incidental, consequential or exemplary damages however arising, even if Luitpold has been advised of the possibility of such damages. Luitpold Pharmaceuticals, Inc. American Regent 7 of 7