Technical Data LABEL & ADHESIVE REMOVER FG FOOD PROCESSING SAFE LABEL & ADHESIVE REMOVER LABEL & ADHESIVE REMOVER FG is a blend of citrus and hydrocarbon oils which quickly releases self-adhesive labels and stickers by loosening the adhesive, thereby assisting in the clean and easy removal of all residues. Specifically formulated for use in the food industry. FEATURES NSF K3 registered (N 140259) for use in the food industry Removes adhesives and paper labels in 3 minutes Particularly effective in removing shipping labels on pallets Good material compatibility (always test prior to application) DIRECTIONS Spray labels generously with Label and Adhesive Remover FG. Most labels can be pulled off after approx. 3 minutes. In difficult cases, waiting time should be extended to approx. 15 minutes. If adhesive is still stuck to the substance after the label has been removed, spray product on a (paper) cloth and wipe off the adhesive residue. If used on plastics or varnished surfaces it is essential to carry out a resistance test before use. Not suitable for objects made of polystyrene or polycarbonate. TECHNICAL DATA NSF Registered, Category : K3 (N 140259) Odour : Pleasant Orange Density at 20 C (Aerosol) : 0.74g/cm³ Flash Point (Aerosol) : <0 C Evaporation Rate (ether = 1) : 94 Packaging : 200ml Aerosol
STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50 O C, away from direct heat and naked flame. HEALTH AND SAFETY Health and Safety sheet available separately. MISREPRESENTATION ACT 1967 TRADE DESCRIPTIONS ACT 1968 The information given in this publication is based on our experience and reports from customers. There are many factors outside our control and knowledge which affect the use and performance of our products and for which reason no warranty is given, express or implied. Users should make their own tests to determine the applicability of such information or the suitability of any products for their own particular purposes. Statements concerning the use of the products described herein are not to be construed as recommending the infringement of any patent and no liability for infringement arising out of any such use is to be assumed. CRC Industries UK Limited, Wylds Road, Bridgwater, Somerset, TA6 4DD Tel: +44 (0) 1278 727200 Fax: +44 (0) 1278 425644 Web: www.ambersil.com E-mail: sales.uk@crcind.com
NSF International / Nonfood Compounds Registration Program January 4, 2008 Mr. Greg Tague CRC INDUSTRIES UK LIMITED, AMBERSIL AMBERSIL HOUSE, WYLDS ROAD CASTLEFIELD INDUSTRIAL ESTATE BRIDGWATER, SOMERSET, TA6 4DD UNITED KINGDOM RE: ambersil LABEL & ADHESIVE REMOVER FG Category Code: K3 NSF Registration No. 140259 Dear Mr. Greg Tague: NSF has processed the application for Registration of ambersil LABEL & ADHESIVE REMOVER FG to the NSF International Registration Guidelines for Proprietary Substances and Nonfood Compounds (2007), which are available at www.nsfwhitebook.org. The NSF Nonfood Compounds Registration Program is a continuation of the USDA product approval and listing program, which is based on meeting regulatory requirements including FDA 21 CFR for appropriate use, ingredient and labeling review. This product is acceptable for use as an adhesive or glue remover (K3), for removing adhesive or glue from food packaging materials in and around food processing areas, where its use is not intended for direct food contact. Before using this compound, food products and packaging materials must be removed from the area or carefully protected. After using these compounds, all surfaces must be thoroughly washed with an acceptable detergent solution, and rinsed with potable water. This compound must be used in a manner so that all odors associated with the compound are dissipated before food products or packaging materials are re-exposed in the area. NSF Registration of this product is current when the NSF Registration Number, Category Code, and Registration Mark appear on the NSF-approved product label, and the registered product name is included in the current NSF White Book Listing of Nonfood Compounds at the NSF website (www.nsfwhitebook.org). The NSF Registration Mark can be downloaded by clicking the "Download Registration Mark" link on the NSF website (www.nsfwhitebook.org). NSF Listing of all registered Nonfood compounds by NSF International is not an endorsement of those compounds, or of any performance or efficacy claims made by the manufacturer. Registration status may be verified at any time via the NSF web site, at www.nsfwhitebook.org. Changes in formulation or label, without the prior written consent of NSF, will void registration, and will supersede the on-line listing. Sincerely, Jennifer De France NSF Nonfood Compounds Registration Program Company No: 3J360
CRC Industries UK Ltd. Castlefield Industial Estate, Wylds Rd, Bridgwater, Somerset, UK, TA64DD Tel.: (+44)(0)127 8 727200 Fax: (+44)(0)127 8 425644 Material Safety Data Sheet Regulation EC No 1907/2006 Art.31 LABEL & ADHESIVE Productname : Creationdate : 23.11.10 REMOVER FG Ref.Nr.: UK10582-3-231110 Replaces: 12.01.09 1. IDENTIFICATION OF PRODUCT AND COMPANY Productname : Application : LABEL & ADHESIVE REMOVER FG Aerosol Cleaners - Precision Company : CRC Industries UK Ltd. Castlefield Industial Estate, Wylds Rd, Bridgwater, Somerset, UK, TA64DD Tel.: (+44)(0)1278 727200 Fax: (+44)(0)1278 425644 E-mail : hse.uk@crcind.com In case of emergency : (+44)(0)1278 727200 Subsidiaries Tel Fax CRC Industries Europe CRC Industries Finland Touwslagerstraat 1 9240 Zele Belgium Asemanrinne 13, 08500 Lohja AS (+32) (0) 52 / 45 60 11 (+32) (0) 52 / 45 00 34 (+358)(0)19/32921 (+358)(0)19/383676
Subsidiaries Tel Fax CRC Industries France CRC Industries Deutschland CRC Industries Iberia CRC Industries Sweden 12, Bld des Martyrs de Chateaubriant F-95102 Argenteuil Cédex (+33)(0)1/34112000 (+33)(0)1/34110996 Südring 9, 76473 Iffezheim (+49)(0)7229/3030 (+49)(0)7229/303266 Gremio del cuero S/N, 40195 Segovia Kryptongatan 14, 43153 Mölndal 2. HAZARD IDENTIFICATION Health and Safety : Environment : Other hazards : (+34)921/427546 (+34)921/436270 (+46)(0)31/7068480 (+46)(0)31/273991 Extremely Flammable Irritating to skin. Vapours may cause drowsiness and dizziness. Remark: Preparations classified as harmful on the basis of an aspiration hazard need not be labelled as harmful with R65 when placed on the market in aerosol containers or in containers fitted with a sealed spray attachment. (EU-Directive 67/548 Annex VI 9.4) Toxic to aquatic organisms, may cause longterm adverse effects in the aquatic environment. Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Without adequate ventilation formation of explosive mixtures may be possible. 3. COMPOSITION AND INFORMATION ON COMPONENTS Hazardous ingredient CAS-nbr. EINECS w/w % symbol R-phrases* Notes carbon dioxide 124-38-9 204-696-9 1-5 - - A,G dipentene 138-86-3 205-341-0 <0.1 Xi,N 10-38-43-50/53 B 3-butoxypropan-2- ol; propylene glycol monobutyl 5131-66-8 225-878-4 <20 Xi 36/38 ether terpinolene 586-62-9 209-578-0 10-30 Xn,N 51/53-65 ethanol; ethyl alcohol 64-17-5 200-578-6 10-30 F 11 B Naphtha (petroleum), hydrotreated light (benzene<0.1%) 64742-49-0 265-151-9 10-30 F,Xn,N 11-38-51/53-65-67 B,P
Hazardous ingredient CAS-nbr. EINECS w/w % symbol R-phrases* Notes butanone; ethyl methyl ketone 78-93-3 201-159-0 <1 F,Xi 11-36-66-67 A Solvent naphtha (petroleum), hydrotreated light naphthenic; Low 92062-15-2 295-529-9 10-30 F,Xn,N 11-38-51/53-65-67 B,P boiling point hydrogen treated naphtha Explanation notes A : substance with Community workplace exposure limit B : substance with national established workplace exposure limit G : exempted from the obligation to register in accordance with art.2(7)(a)of REACH Regulation No 1907/2006 P : not classified as carcinogen, less than 0.1% w/w benzene (Einecsnr. 200-753-7) Note H and P of Annex I (67/548/EEC) apply for the naphtha's in this product. Remark: for substances with workplace exposure limits see point 8. (* Explanation risk-phrases : see chapter 16) 4. FIRST AID MEASURES General Advice : Contact with eyes : Contact with skin : The usual precautions for handling chemicals should be observed If any symptoms should occur, seek medical advice. If substance has got into eyes, immediately wash out with plenty of water Seek medical advice Remove contaminated clothing immediately and drench affected skin with plenty of water Seek medical advice
Inhalation : Ingestion : 5. FIRE-FIGHTING MEASURES Flash point (without propellant): Explosion limits : upper limit : 19 % lower limit : 1.1 % Extinguishing media : Fresh air, keep warm and at rest. Seek medical attention if ill effects occur Ingestion is unlikely to occur If swallowed do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention < 0 C (Closed Cup) foam, carbon dioxide or dry agent Fire-fighting procedures : Keep container(s) exposed to fire cool, by spraying with water Unusual exposure hazard : Aerosols may explode if heated above 50 C 6. ACCIDENTAL RELEASE MEASURES Personal precautions : Environmental precautions : Cleaning methods : 7. HANDLING AND STORAGE Handling procedures : Storage procedures : Shut off all ignition sources Ensure adequate ventilation Wear suitable protective clothing and gloves. Do not allow to enter public sewers and watercourses If polluted water reaches drainage systems or water courses, immediately inform appropriate authorities Absorb spillage in suitable inert material Ensure adequate ventilation Keep away from heat and sources of ignition Do not spray on a naked flame or incandescent material. Do not pierce or burn aerosols, even after use. Do not breathe aerosols or vapours. Avoid contact with skin and eyes. Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50 C. Keep in a cool, dry, well ventilated place Keep out of reach of children.
8. EXPOSURE CONTROL AND PERSONAL PROTECTION Control procedures : Personal protection : inhalation : hands and skin : eyes : Exposure limits : Ensure adequate ventilation Keep away from heat and sources of ignition Take precautionary measures against static discharges It is advisable to take precautions to avoid contact with skin and eyes when handling the product. Use only in well ventilated areas In case of insufficient ventilation, wear suitable respiratory equipment. (Filter type AX) Wear suitable protective gloves (nitrile) Wear safety goggles. Hazardous ingredient CAS-nbr. method EU established exposure limits: carbon dioxide 124-38-9 TWA 5000 ppm butanone; ethyl methyl ketone 78-93-3 TWA 200 ppm STEL 300 ppm 9. PHYSICAL AND CHEMICAL PROPERTIES (for aerosols without propellant) Apperance : physical state : colour : odour : Boiling point/range : Relative density : ph : Vapour pressure : Relative vapour density : Solubility in water : Flash point : CO2 propelled liquid. Colorless. Solvent. Not available. 0.81 g/cm3 (@ 20 C). Not applicable. Not available. Not available. Insoluble in water Auto-ignition : > 165 C Viscosity : Evaporation rate : 10. STABILITY AND REACTIVITY Conditions to be avoided : Materials to be avoided : < 0 C (Closed Cup) Not applicable. Not available. Hazardous decomposition compounds : CO,CO2 Avoid overheating Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50 C. Strong oxidising agent
11. TOXICOLOGICAL INFORMATION Inhalation : Ingestion : Skin contact : Eye contact : 12. ECOLOGICAL INFORMATION Other adverse effects : 13. WASTE DISPOSAL Product : 14. TRANSPORT UN-number : 1950 Road/Rail - ADR/RID : Environmentally hazardous Excessive inhalation of solvent vapours may give rise to nausea, headaches and dizziness Ingestion is unlikely to occur After vomiting of swallowed product aspiration into lungs is likely. Solvents may induce chemical pneumonia. Irritating to skin Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis May produce an allergic reaction. May cause irritation. Toxic to aquatic organisms, may cause longterm adverse effects in the aquatic environment. Do not allow to enter public sewers and watercourses Do not empty into drains. This material and its container must be disposed of in a safe way. Disposal should be in accordance with local, state or national legislation UN1950 Aerosols Class : 2, PG : NA, Class code : 5F, Label : 2.1, Tunnel-code : (D) YES Sea - IMDG : UN1950 Aerosols Class : 2, PG : NA, Label : 2.1 EmS F-D,S-U Marine pollutant P Air - IATA/ICAO : UN1950 Aerosols, flammable Class : 2, PG : NA, Label : 2.1 Environmentally hazardous YES
15. REGULATORY INFORMATION Warning symbol(s) : F+ : EXTREMELY FLAMMABLE Xi : IRRITANT N : DANGEROUS FOR THE ENVIRONMENT Risk-phrase(s) : R38: Irritating to skin. R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R67: Vapours may cause drowsiness and dizziness. Safety-phrase(s) : S2: Keep out of the reach of children. S16: Keep away from sources of ignition - No smoking. S23: Do not breathe vapours/spray. S35: This material and its container must be disposed of in a safe way. S51: Use only in well-ventilated areas. Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Without adequate ventilation formation of explosive mixtures may be possible. Classified according to Dir. 2008/47/EC amendment of the aerosol dispenser directive 75/324/EEC. Classification according to EU-directive 99/45/EC Remark: Preparations classified as harmful on the basis of an aspiration hazard need not be labelled as harmful with R65 when placed on the market in aerosol containers or in containers fitted with a sealed spray attachment. (EU-Directive 67/548 Annex VI 9.4) 16. OTHER INFORMATION This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with any legal regulation. The information contained herewith is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It does not guarantee any specific properties. Apart from any fair dealing for purposes of study, research and review of health, safety and environmental risks, no part of these documents may be reproduced by any process without written permission from CRC. REVISIONS IN CHAPTRE : 2,15
*Explanation risk-phrases: R11: Highly flammable. R36: Irritating to eyes. R38: Irritating to skin. R43: May cause sensitization by skin contact. R50/53: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R65: Harmful: may cause lung damage if swallowed. R66: Repeated exposure may cause skin dryness or cracking. R67: Vapours may cause drowsiness and dizziness. This Material Safety Data Sheet may already have been revised at this moment for reason such as legislation, availability of components and newly acquired experiences. The latest and only valid version of this Material Safety Data Sheet will be sent to you upon simple request or can be found on our website : www.crcind.com. We recommend you to register on this website for this product so you will be able to receive any future updated version automatically.