Beakers & Bottles ASPIRATOR, POLYTHENE (EC.102.03) Rigid polyethene, Heavy duty, with plastic screw cap, stopcock, jerry can type..01 2.5 Litres..02 5 Litres.03 10 Litres.04 20 Litres..05 35 Litres.06 50 Litres ASPIRATOR, P. P. (EC.102.04) These aspirator bottles are made from polypropylene and are therefore much lighter than glass. These are autoclavable, durable and dependable. The leak proof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving..01 5 Litres..02 10 Litres.03 20 Litres BOTTLES REAGENT, N.M., POLYTHENE (EC.102.06) These narrow mouth reagent bottles are available in polypropylene as well as polyethylene. The P.P. bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved, filled as well as empty. On the other hand Polyethylene bottles to have excellent strength and are unbreakable. The polypropylene cap has a built in seal ring to make these bottles leak proof..01 60 ml..02 125 ml. BOTTLE REAGENT, W. M., POLYTHENE (EC.102.07) These wide mouth reagent bottles are available in polypropylene as well as polyethylene. The P.P. bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved, filled as well as empty. On the other hand Polyethylene bottles to have excellent strength and are unbreakable. The polypropylene cap has a built in seal ring to make these bottles leak proof..01 60 ml..02 125 ml. BOTTLE DROPPING, POLYTHENE (EC.102.08)
Bottle dropping T.K. Pattern. Blown from low density polyethylene, these dropping bottles dispense small uniform drops of liquids when pressed tightly..01 60 ml..02 125 ml. BOTTLE POLYTHENE (Washing) (EC.102.09) These bottles are made from Low -Density polyethylene, which gives theses bottles a translucent & unbreakable character. Solutions can be poured in easily by squeezing the bottles lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required..01 125 ml..02 250 ml..03 500 ml..04 1000 ml. BOTTLE WASH, POLYTHENE, NEW PATTERN (EC.102.10) These bottles are also, made from Low -Density polyethylene, and are therefore translucent and unbreakable. The distinguishing feature that theses bottles contain is the built in delivery tube. Making it a one piece wash bottle. These bottles are graduated on outer surface to give an approximate idea about the volume of solution filled or dispensed..01 125 ml..02 250 ml..03 500 ml. Bottle Gas wash, Woulf, Polythene (EC.102.11) Made of polythene with two necks.01 250 ml..02 500 ml. BEAKER, POLYPROPYLENE (EC.102.12) These beakers are moulded in polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
.01 50 ml..02 100 ml..06 2000 ml. BEAKER, P. P., EURO PATTERN (EC.102.13) This is a specially fabricated design provided with extra strength, by increasing the general wall thickness. These beakers are moulded in polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout..01 25 ml..02 50 ml..03 100 ml..04 250 ml..05 500 ml..06 1000 ml. BEAKER, TPX (EC.102.14) Graduated. Clear transparent TPX, Glass like transparency with spout. Heat resistance upto 120 C. May be autoclaved non - toxic, acid, alkali and solvent proof. Graduated.01 50 ml..02 100 ml..06 2000 ml..07 5000 ml..08 10000 ml. Measuring Jugs (EC.102.124) These handy Jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading..01 250 ml..02 500 ml..03 1000 ml..04 2000 ml. Measuring Jugs (Euro) (EC.102.125) Adding to the existing range of Jugs, these short form transparent Jugs, made of Polypropylene are autoclavable and have non-drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on the handle.
.01 500 ml..02 1000 ml..03 2000 ml..04 3000 ml..05 5000 ml. Carboys (EC.102.136) Carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable Carboys are provided with wide handles making it convenient while carrying or pouring purpose..01 10 Ltrs..02 20 Ltrs. Carboys with stopcock (EC.102.137) Adding in line of Aspirators, these polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions..01 10 Ltrs..02 20 Ltrs. Bottle, Narrow mouth (EC.102.138) This autoclavable bottle, made of polypropylene, can be used for storing & transferring chemicals and other reagents safe & sound..01 4 Ltrs. Bottle, Square, Wide mouth (EC.102.139) This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The built in depressions on two sides provide excellent grip while holding this bottle..01 4 Ltrs.
Bottle, Vacuum (EC.102.140) This autoclavable bottle, made of polypropylene, has thick walls, is rugged & can be used for repeated applications of vaccum..01 2 Ltrs. Bottle Wash for Spraying (EC.102.155) With adjustable nozzle for continuous jet or fine spray. Measuring-Jugs (SC.102.124) Carboys (SC.102.136)
Carboys-with-sto (SC.102.137) Bottle,-Narrow-m (SC.102.138) Bottle,-Square, (SC.102.139) Bottle,-Vacuum (SC.102.140)