INTRODUCTION Forming part of the well established Protec range, the premium LED variant offers lumen output packages up to 3000lm making it suitable as a primary light source for high end specifications, such as receptions, offices, retail, corridors, meeting rooms, airports and educational establishments. With impressive energy cost savings (with short capital cost payback periods) over its fluorescent equivalents, it is an ideal option to tie in with environmental management policies, requiring a commitment to energy reduction. The comes with a number of bezel, reflector, beam angle and colour attachment options and once installed, reflectors and colour attachments can be easily removed and replaced. This allows for lighting updates in-line with changes to room layout, new branding colour schemes or display rearrangement. IP65 rating can be achieved for use in bathrooms and wet areas and BSEN 12464 glare compliant variants are available for use in offices. The also comes with a range of emergency and dimming options and is also compatible with a wide range of Dextra sensors offering both presence control and daylight regulation allowing for increased energy savings and better return on investment. Custom bezels available on request for retrofit applications to ensure suitability for existing ceiling cut outs. White tunable available (PTEC S version). APPLICATION Canteen Commercial/Offices Corridor Education T: 01747 858100 E: sales@dextralighting.co.uk Page 1 of 16
Healthcare/Social Housing Hotel/Leisure Industrial/Manufacturing Office Retail Toilet Transport Warehouse/Storage SPECIFICATION Construction ABS housing. ABS bezel. Anodised aluminium reflectors OptiSpec or OptiSat. Zinc plated spring steel fixing clips. Polycarbonate colour accessories. Custom bezels available on request for retrofit applications. Performance LORs in excess of 90%. Although lumen packages will always remain the same, lumens per watt will only improve in line with developments to the Philips Fortimo chip technology. This offers improved performance and greater efficiency. For further information about the current generation please contact the Dextra Technical team on 01747 858100. Philips Lumileds LM80 verified: 90% LED lumen maintenance at 60,000 operating hours (DLM version only). L2 compliant 82 Llm/w*. ECA compliant*. *specific variants only ContROL Dimming options include Switch-Dim and DALI. White Tunable, Lumen outputs vary, please contact our sales department for details (PTEC S version only). Emergency 3 hour maintained, self test and auto test emergency options. Installation Four point self clamping spring bracket retains fitting in ceiling for an ultra quick installation. One cut-out size 160mm diameter. Ceiling thickness from 7mm to 42mm (use Liteyoke 3mm plywood patress when mounting to soft tiles). T: 01747 858100 E: sales@dextralighting.co.uk Page 2 of 16
Suitable for plasterboard and mineral fibre installation. Variations Once installed, reflectors and colour attachments can be easily removed and replaced. This allows for lighting updates in-line with changes to room layout, new branding colour schemes or display rearrangement. There are a number of bezel, reflector, beam angle and colour attachment options. IP44 clear cover fits all model sizes and can be fitted over colour attachments (IP65 if silicone sealed). IMAGES Product Images T: 01747 858100 E: sales@dextralighting.co.uk Page 3 of 16
T: 01747 858100 E: sales@dextralighting.co.uk Page 4 of 16
Project Images T: 01747 858100 E: sales@dextralighting.co.uk Page 5 of 16
T: 01747 858100 E: sales@dextralighting.co.uk Page 6 of 16
T: 01747 858100 E: sales@dextralighting.co.uk Page 7 of 16
T: 01747 858100 E: sales@dextralighting.co.uk Page 8 of 16
T: 01747 858100 E: sales@dextralighting.co.uk Page 9 of 16
TECHNICAL PTECDLED PTECSLED WARRANTY All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time. Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and credit given against defective product returned. The course of action taken will be at our discretion and dependent on the nature of the defect. The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5 years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components only for the final 2 years. PROTEC LED FR 8W GU10 luminaires and all Emergency LED ranges such as LED 3, EXI, HBE, OAT, OEZ, AME, OEH and TWS * are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only. All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or unsuitable environmental conditions. It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not be issued against returned products. No consequential losses incurred resulting from any defect with our product will be reimbursed. T: 01747 858100 E: sales@dextralighting.co.uk Page 10 of 16
Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are supplied with a twelve month warranty only. 5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where failures exceed the component manufacturers expected failure rate and lumen depreciation. If you require any assistance with regards to our products please do not hesitate to contact our Customer Services department on 01747 858100. *The LED4 Emergency LED range is supplied with a three year battery warranty and 5 year luminaire warranty. ORDER CODES Luminaire Codes Code Description Circuit Wattage PTEC D1100 HF C84 DLM, 1100 Lumen / Fixed Output, Colour 84 (ECA) 8.9w PTEC D2000 HF C84 DLM, 2000 Lumen / Fixed Output, Colour 84 (ECA) 16.5w PTEC D3000 HF C84 DLM, 3000 Lumen / Fixed Output, Colour 84 (ECA) 28.0w PTEC D1100 DIM C84 DLM, 1100 Lumen / Switch Dim / DALI, Colour 84 (ECA) 8.9w PTEC D2000 DIM C84 DLM, 2000 Lumen / Switch Dim / DALI, Colour 84 (ECA) 16.5w PTEC D3000 DIM C84 DLM, 3000 Lumen / Switch Dim / DALI, Colour 84 (ECA) 28.0w PTEC S1400 HF C84 SLM, 1400 Lumen, High Frequency Driver, Colour 84 (ECA) 9.8w PTEC S1400 DIM C84 SLM, 1400 Lumen, Switch Dim/DALI, Colour 84 (ECA) 9.8w PTEC S2000 HF C84 SLM, 2000 Lumen, High Frequency Driver, Colour 84 (ECA) 13.8w PTEC S2000 DIM C84 SLM, 2000 Lumen, Switch Dim/DALI, Colour 84 (ECA) 13.8w PTEC S3000 HF C84 SLM, 3000 Lumen, High Frequency Driver, Colour 84 (ECA) 20.9w PTEC S3000 DIM C84 SLM, 3000 Lumen, Switch Dim/DALI, Colour 84 (ECA) 20.9w Must be sold in conjunction with reflector listed below. (Reflectors ordered separately) Custom bezels available on request for retrofit applications to ensure suitability for existing ceiling cut outs, please enquire with our sales department for further information. Protec DLM SILVER BEZEL PTEC DG R Silver Bezel / OptiSpec Reflector (No Coloured Ring) PTEC DG R WH Silver Bezel / OptiSpec Reflector / White Halo PTEC DG R GR Silver Bezel / OptiSpec Reflector / Green Halo PTEC DG R BL Silver Bezel / OptiSpec Reflector / Blue Halo PTEC DG R OR Silver Bezel / OptiSpec Reflector / Mango Halo PTEC DG SSR Silver Bezel / OptiSat Reflector (No Coloured Ring) PTEC DG SSR WH Silver Bezel / OptiSat Reflector / White Halo PTEC DG SSR GR Silver Bezel / OptiSat Reflector / Green Halo PTEC DG SSR BL Silver Bezel / OptiSat Reflector / Blue Halo PTEC DG SSR OR Silver Bezel / OptiSat Reflector / Mango Halo PTEC DG R DGR Silver Bezel / OptiSpec Reflector (No Coloured Ring) Drop Glass Ring PTEC DG SSR DGR Silver Bezel / OptiSat Reflector (No Coloured Ring) Drop Glass Ring PTEC DG R MPD Silver Bezel / OptiSpec Reflector, Micro Prism Diffuser PTEC DG R OD Silver Bezel / OptiSpec Reflector, Opal Diffuser PTEC DG SSR MPD Silver Bezel / OptiSat Reflector, Micro Prism Diffuser T: 01747 858100 E: sales@dextralighting.co.uk Page 11 of 16
PTEC DG SSR OD Silver Bezel / OptiSat Reflector, Opal Diffuser WHITE BEZEL PTEC DW R White Bezel / OptiSpec Reflector (No Coloured Ring) PTEC DW R WH White Bezel / OptiSpec Reflector / White Halo PTEC DW R GR White Bezel / OptiSpec Reflector / Green Halo PTEC DW R BL White Bezel / OptiSpec Reflector / Blue Halo PTEC DW R OR White Bezel / OptiSpec Reflector / Mango Halo PTEC DW SSR White Bezel / OptiSat Reflector (No Coloured Ring) PTEC DW SSR WH White Bezel / OptiSat Reflector / White Halo PTEC DW SSR GR White Bezel / OptiSat Reflector / Green Halo PTEC DW SSR BL White Bezel / OptiSat Reflector / Blue Halo PTEC DW SSR OR White Bezel / OptiSat Reflector / Mango Halo PTEC DW R DGR White Bezel / OptiSpec Reflector (No Coloured Ring) Drop Glass Ring PTEC DW SSR DGR White Bezel / OptiSat Reflector (No Coloured Ring) Drop Glass Ring PTEC DW R MPD White Bezel / OptiSpec Reflector, Micro Prism Diffuser PTEC DW R OD White Bezel / OptiSpec Reflector, Opal Diffuser PTEC DW SSR MPD White Bezel / OptiSat Reflector, Micro Prism Diffuser PTEC DW SSR OD White Bezel / OptiSat Reflector, Opal Diffuser PTEC D IP44 IP44 Front Cover (IP44 From Front Only) (IP65 can be achieved if cover is silicone sealed in place) Protec SLM SILVER BEZEL PTEC SG SSMD BL Silver Bezel, Optisat Medium Reflector, Blue Ring PTEC SG SSMD GR Silver Bezel, Optisat Medium Reflector, Green Ring PTEC SG SSMD OR Silver Bezel, Optisat Medium Reflector, Orange Ring PTEC SG SSMD WH Silver Bezel, Optisat Medium Reflector, White Ring PTEC SG SSNR BL Silver Bezel, Optisat Narrow Reflector, Blue Ring PTEC SG SSNR GR Silver Bezel, Optisat Narrow Reflector, Green Ring PTEC SG SSNR OR Silver Bezel, Optisat Narrow Reflector, Orange Ring PTEC SG SSNR WH Silver Bezel, Optisat Narrow Reflector, White Ring PTEC SG SSOA Silver Bezel, Optisat Open Area Reflector PTEC SG SSOA BL Silver Bezel, Optisat Open Area Reflector, Blue Ring PTEC SG SSOA GR Silver Bezel, Optisat Open Area Reflector, Green Ring PTEC SG SSOA OR Silver Bezel, Optisat Open Area Reflector, Orange Ring PTEC SG SSOA WH Silver Bezel, Optisat Open Area Reflector, White Ring WHITE BEZEL PTEC SW SSMD BL White Bezel, Optisat Medium Reflector, Blue Ring PTEC SW SSMD GR White Bezel, Optisat Medium Reflector, Green Ring PTEC SW SSMD OR White Bezel, Optisat Medium Reflector, Orange Ring PTEC SW SSMD WH White Bezel, Optisat Medium Reflector, White Ring PTEC SW SSNR BL White Bezel, Optisat Narrow Reflector, Blue Ring PTEC SW SSNR GR White Bezel, Optisat Narrow Reflector, Green Ring PTEC SW SSNR OR White Bezel, Optisat Narrow Reflector, Orange Ring PTEC SW SSNR WH White Bezel, Optisat Narrow Reflector, White Ring PTEC SW SSOA White Bezel, Optisat Open Area Reflector PTEC SW SSOA BL White Bezel, Optisat Open Area Reflector, Blue Ring PTEC SW SSOA GR White Bezel, Optisat Open Area Reflector, Green Ring PTEC SW SSOA OR White Bezel, Optisat Open Area Reflector, Orange Ring T: 01747 858100 E: sales@dextralighting.co.uk Page 12 of 16
PTEC SW SSOA WH White Bezel, Optisat Open Area Reflector, White Ring PTEC S IP44 SLM, IP44 Front Cover (IP44 from front only) Dimming & Lighting Gear Code Description WT White Tunable, Lumen outputs vary, please contact our sales department for details Please click here for full details on our white tunable offer Above dimming option is for the PTEC S version only. Emergency Code Description E3 3 Hour Integral Emergency ST3 Self Test AT3 Autotest Emergency Miscellaneous Code Description C83 Colour Rendering Index 80, Colour Temperature 3000K C34998 & C3793 1M 6 Pole Blue / Black Lead and Besa Connection Plate C34997 & C3792 1M 4 Pole Lead and Besa Connection Plate C34996 & C3791 1M 3 Pole Lead and Besa Connection Plate
Installation 230-240V / 50-60Hz IP20 IK00 WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY. + emergency Minimum Void Dimensions (mm) A = 260 B = 600 C = 270 D = 120 Ambient Temperature in the ceiling void = Min. -20 to Max. +35 1 DO NOT cover heat sink Hole aperture 160mm (Dia) Use 3mm ply-wood patress when mounting to soft tile or ceiling depth less than 7mm. Ceiling depth: Max. - 42mm Min. - 7mm DIL-88-0003_B 26/09/17
Installation 2 3 Wire mains cable into marked terminals as required. Close backflap and screw shut. 4 5 6 7 8 9 DIL-88-0003_B 26/09/17
LED Generic Installation Supply Voltage range 220-240AC, 50/60Hz Origin Dextra Group plc. Emergency Duration (If applicable) 3Hr Ingress protection (unless stated otherwise) IP20 WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE regulations and relevant legislation. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY. This luminaire is only suitable for domestic, light industrial and industrial environments which are within the scope of EN55015. Operating temperature = 0 C 25 C. If the temperature exceeds the drivers maximum Ta rating, there is a safety mechanism where the driver will either dim or switch off to allow it to cool (Unless other operating temperatures are specified in product literature). For the maximum number of luminaires that may be interconnected or the maximum total current that may be drawn by means of couplers provided for looping-in connection to the mains supply, confirm with specific manufacturers' data-sheet. The light source of this luminaire is not replaceable when the light source reaches its end of life the whole luminaire shall be replaced. LUMINAIRES FITTED WITH A MAINTAINED EMERGENCY PACK. IMPORTANT: When the mains supply is isolated, the output terminals can still be live if the battery is connected. Both mains and batteries must be isolated before servicing. This luminaire is supplied converted for 3 hour maintained emergency operation. Fitting should be installed in the usual way as detailed on the installation instruction leaflet supplied. A secondary unswitched live connection (L2) should be fed to the in-line within the fitting to supply a monitor live and for the battery charging circuit. The unswitched supply must be taken from the same phase as the switched luminaire supply. Once installed the integral/remote batteries must be commissioned. The battery cells must be connected to the emergency module (in some instances these are left disconnected for transportation). Batteries are connected either by a plug and socket arrangement or by connecting directly to the battery spade terminal. After making the unswitched mains supply live, the charging status indicator illuminates green to indicate that the batteries charging. Upon disconnection of this supply the indicator will extinguish and the emergency LED board will light. A period of 24 hours should be allowed before a full discharge test is carried out to ensure the battery is fully charged. A few repeated full charge and discharge cycles may be required to condition the battery to its maximum capacity. A maintenance sheet indicating testing intervals and duration is included and should be completed by the installation engineer after commissioning and issued to the customers maintenance department. The test record card should be completed at specified intervals to indicate that the full 3 hour duration is still being obtained. Batteries should be replaced once the rated duration can no longer be met. Excessive disconnection of the unswitched mains supply may result in premature battery failure or failure of the luminaire. There are no user serviceable parts in the module. Battery electrolyte can be harmful to eyes and open wounds. Care must be taken to avoid puncturing the case and allowing electrolyte to escape. If electrolyte touches the skin, flush with water. Do not incinerate batteries. DIMMING NOTES: Always wire the fitting as per the labels indicated on the terminal blocks. For mains wiring of fittings with integral sensors refer to separate sensor installation leaflet. DIL-0100-0001_B 27/05/16