MATERIAL SAFETY DATA SHEET MOLDEX MOLD KILLER SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: MOLDEX MOLD KILLER EPA No. 6836-193-82480 Product Class: Product Use: Sold By: Telephone Numbers: Quaternary Ammonium Compound RTU Ready to Use Disinfectant EnviroCare Corporation 10 Upton Drive Wilmington, MA 01887 24hr Emergency Assistance: Chemtrec 1-800-424-9300 (US/Canada) 1-703-527-3887 (Int/Maritime) Product or Company Information: 1-978-658-0123 (Mon-Fri) SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient CAS # Wt % Quaternary ammonium 68424-85-1 0.3 compounds, benzyl-c12-16- alkyl dimethyl, chlorides Proprietary ingredients 99.7 SECTION 3: HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: Caution Form: liquid, Color; clear, Color depends on dye added Hazard Summary: Handle with good hygiene and safety practice POTENTIAL HEALTH EFFECTS Primary Routes of Entry: Eyes: Skin: Symptoms of Overexposure: Eyes, Skin, Ingestion, Inhalation Cause eye irritation Causes skin irritation Page 1 of 5
HMIS Classification: Health hazard: 1 Flammability: 0 Reactivity: 0 SECTION 4: FIRST AID MEASURES EYES: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Call a physician immediately. SKIN: After contact with skin, wash immediately with plenty of soap and water. Consult a physician. INGESTION: Call a physician immediately. Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. INHALATION: Remove to fresh air. If breathing is irregular or stopped, administer artificial respiration. NOTES TO PHYSICIAN Symptoms: Treatment: SECTION 5: FIRE-FIGHTING MEASURES FLASH POINT: N/A, Not Determined FIRE FIGHTING: Suitable extinguishing media: Dry Powder, Water Spray, and Foam. Further Information: Use water spray to cool unopened containers. PROTECTIVE EQUIPMENT and PRECAUTIONS for FIREFIGHTERS Specific hazards during firefighting: Heating or fire can release toxic gas. Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus. SECTION 6: ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Use respirator when performing operations involving potential exposure to vapor of the product. ENVIRONMENTAL PRECAUTIONS: Prevent product from entering drains. METHODS FOR CONTAINMENT/ METHODS FOR CLEANING UP: Sweep up or vacuum up spillage and collect in suitable container for disposal. Do not flush into surface water or sanitary sewer system Page 2 of 5
. SECTION 7: HANDLING AND STORAGE HANDLING: Provide sufficient air exchange and/or exhaust in work rooms. Avoid contact with skin and eyes. Advice on protection against fire and explosion: Take precautionary measures against static discharges STORAGE: Keep container tightly closed, dry, and out of reach of children. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION EXPOSURE GUIDELINES: Contains no substances with occupational exposure limit values. PERSONAL PROTECTIVE EQUIPMENT: Eye Protection: Tightly fitting safety goggles Hand Protection: Wear suitable gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Skin and Body Protection: Choose body protection according to the amount and concentration of the dangerous substance at the work place. No special protective equipment required. Respiratory Protection: In the case of vapor formation use a respirator with an approved filter. Hygiene Measures: Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE: Clear Liquid. Color depends on dye used ODOR: Little or no odor PHYSICAL STATE: Clear Liquid ph AS SUPPLIED: 11.5-12.5 BOILING POINT: 212 F (100C) Page 3 of 5
FREEZING POINT: 32F (0C) FLASHPOINT: Not determined SECTION 10: STABILITY AND REACTIVITY STABILITY: Stable under normal conditions CONDITIONS TO AVOID (STABILITY): None known SECTION 11: TOXICOLOGICAL INFORMATION TOXICOLOGICAL INFORMATION: Skin Irritation: Irritating to skin Eye Irritation: Irritating to eyes SECTION 12: ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION:. SECTION 13: DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD: Dispose of in accordance with Local, State and Federal Guidelines SECTION 14: TRANSPORT INFORMATION HAZARD CLASS: Non-Hazardous Material. DOT: Not regulated. TDG: Not regulated IATA: Not dangerous goods IMDG-CODE: Not dangerous goods RID: Not dangerous goods Page 4 of 5
SECTION 15: REGULATORY INFORMATION SARA 311/312 HAZARDS: Acute health hazard U.S. FEDERAL REGULATIONS: All ingredients are listed or exempt on the US TSCA Chemical Inventory. This product is EPA registered. USD STATE REGULATIONS: California Prop. 65: This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. This product has been classified according to the hazard criteria of the CPR and the MSDS contains all of the information required by the CPR. SECTION 16: OTHER INFORMATION OTHER INFORMATION: The information contained herein is based on data believed by this company to be accurate. We do not assume any liability for its accuracy. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Page 5 of 5