FOOD GRADE EQUIPMENT LUBRICANTS
STOPLIGHT FOOD SAFETY PROGRAM MINIMIZE THE RISK OF FOOD CONTAMINATION Developed in response to a growing need within the industry to minimize the risk of food contamination from maintenance chemicals across all food processing areas, the StopLight Food Safety Program helps to insure proper product usage, minimize risk and cost, and establish and maintain FSMA requirements. StopLight involves the use of colored- coded stickers placed directly on CRC MRO products to determine where the product can be used, who may use them and where they should be stored. Non-food compounds and application areas are coded, Red, Yellow and Green. The stickers provide flexibility within the program, and each facility makes their own determination how to color code processing areas, applications and products. STICKERS POSTERS stoplight RED TM = Authorized Use Description for RED products: stoplight YELLoW TM Questions Call: = Authorized By: Date: Part # 19002 Authorized Use Description for YELLoW products: = Authorized Use Description for GREEN products: Questions Call: Authorized By: Date: Part # 19001 stoplight GREEN TM Questions Call: Authorized By: Date: Part # 19000 NATIONAL SANITATION FOUNDATION NSF REGISTERED VERSUS NSF 3H REGISTERED CRC offers a wide range of maintenance chemicals that are NSF Registered. The National Sanitation Foundation (www.nsf.org) is an independent, accredited organization, which tests, audits and certifies products and systems for public health and safety. With over 300+ NSF approved products, CRC provides broad application solutions for the Food & Beverage industry. NSF Registered food grade lubricants are certified for incidental contact with food during processing. They are made specifically with ingredients that pose no danger to humans and animals even if they were to get into the food product. NSF 3H Registered release agent lubricants are certified for direct use on surfaces that come into contact with food. From to 3H, CRC has you covered! NSF is a registered trademark of NSF International
FOOD GRADE EQUIPMENT LUBRICANTS INNOVATIVE PRODUCTS AND COST SAVING SOLUTIONS Food Safety is a primary concern across the entire supply chain. The goal of food processors and packaging manufacturers is to prevent food contamination and to keep their plants running efficiently. CRC provides innovative products and cost saving solutions for this ever changing industry. The CRC broad line of lubricants has been specifically developed for the food processing industry. Learn more about CRC bulk food grade lubricants: Air Tool Oils Compressor Oils Hydraulic Oils Gear Oils Chain Oils Direct Food Contact Oils CRC has an oil for every application including: mineral, synthetic PAO, synthetic PAG or ester-based. FOOD SAFETY MODERNIZATION ACT (FSMA) FSMA REQUIRMENTS FSMA requires food manufacturers and processors to establish and maintain comprehensive plans covering every aspect of their production processes, including the use of lubricants. The new FSMA rules require that NSF food grade lubricants be stored separately from other, non-food MRO chemicals. For more information visit www.fsmafoodlubricants.com.
USP WHITE MINERAL OIL FOOD GRADE MULTI-PURPOSE OIL Multi-purpose food grade oil formulated with USP grade white oils. Perfect for use in food processing, pharmaceutical and agricultural industries. 04218 5 gal. 22 20.8/4.2 106 410-49.87 04219 55 gal. 22 20.8/4.2 106 410-49.87 FOOD GRADE HYDRAULIC OIL Food grade hydraulic fluids that are formulated with USP grade white oils for use with severe hydraulic systems using high pressure and high output pumps. Excellent compatibility with elastomers, seals, plastics, and paints. 04220 5 gal. 32 34/5.8 112 420-41.86 04221 55 gal. 32 34/5.8 112 420-41.86 04222 5 gal. 46 47.3/7.2 112 450-31.88 04223 55 gal. 46 47.3/7.2 112 450-31.88 04226 5 gal. 68 71.0/9.2 106 500-27.87 04227 55 gal. 68 71.0/9.2 106 500-27.87 04228 5 gal. 100 103/11.8 104 505-24.88 04229 55 gal. 100 103/11.8 104 505-24.88 04230 5 gal. 150 154/14.7 93 505-20.89 04231 55 gal. 150 154/14.7 93 505-20.89 FOOD GRADE GEAR OIL Food grade gear lubricant formulated with USP grade white oils. Excellent compatibility with elastomers, seals, plastics, and paints. ISO SAE Pour Point 04246 5 gal. 150/220 90 190/18.3 97 374-14.88 04247 55 gal. 150/220 90 190/18.3 97 374-14.88 04250 5 gal. 320 85W-140 313.4/24.9 102 464-11.88 04251 55 gal. 320 85W-140 313.4/24.9 102 464-11.88 04254 5 gal. 460 140 452.6/33.7 110 374-9.89 04255 55 gal. 460 140 452.6/33.7 110 374-9.89 04555 5 gal. 680 250 640/43 111 446-4.90 04556 55 gal. 680 250 640/43 111 446-4.90 FOOD GRADE PROOFER CHAIN LUBE A USP grade white oil based chain lubricant designed for high humidity. Fortified to protect against oxidation and corrosion. Super resistance to metal wear. Typical applications: proofer boxes, conveyor roller ball bearings, pin and roller chains, and slides. 04261 5 gal. 100 100/15 158 370 5.88 04262 55 gal. 100 100/15 158 370 5.88
DIRECT FOOD CONTACT WHITE OIL NSF 3H Registered white oils are purified mineral oils that are edible, colorless, odorless, and tasteless. These products are useful in coating and release applications. 3H @40 C 04590 5 gal. 15 15 95-100 359.6-18.85 04591 55 gal. 15 15 95-100 359.6-18.85 04592 5 gal. 22 20 95-100 413.6-18.85 04593 55 gal. 22 20 95-100 413.6-18.85 04594 5 gal. 46 46 95-100 410-15.85 04595 55 gal. 46 46 95-100 410-15.85 04596 5 gal. 100 105 95-100 505.4-12.86 04597 55 gal. 100 105 95-100 505.4-12.86 SYNTHETIC PAO (POLYALPHAOLEFIN) FOOD GRADE SYNTHETIC CHAIN LUBE A fully synthetic food grade chain and sprocket oil formulated from polyalphaolefin (PAO) base oil and tackifier to protect a wide variety of equipment. Developed with high performance antioxidants, anti-wear additives and rust inhibitors to exceed the challenges of modern food-processing equipment and environments. Provides extended lubrication change intervals and will extend equipment life. Wide operating temperature range (-5 F to 450 F). 04264 5 gal. 100 100/8.5 130 460-35.85 04265 55 gal. 100 100/8.5 130 460-35.85 FOOD GRADE CHAIN LUBE Blend of synthetic lubricants and mineral oil, designed to keep roller drive and conveyor chains lubricated. Reduces friction and wear that causes metal fatigue. Non-drying film. High temperature stability up to 325 F. 04269 5 gal. 100 100/ND ND >370 ND.87 04270 55 gal. 100 100/ND ND >370 ND.87 FOOD GRADE SYNTHETIC HYDRAULIC OIL Fully synthetic fluids blended from premium polyalphaolefin (PAO) base oils for use in hydraulic systems within the food industry. Excellent compatibility with elastomers, seals, plastics, and paints. Offers a wide temperature range. 04545 5 gal. 22 22/4.5 116 465-76.82 04546 55 gal. 22 22/4.5 116 465-76.82 04547 5 gal. 32 31.4/5.6 117 465-86.82 04548 55 gal. 32 31.4/5.6 117 465-86.82 04212 5 gal. 46 46/7.9 127 500-70.83 04213 55 gal. 46 46/7.9 127 500-70.83 04216 5 gal. 68 68.8/10.5 141 500-55.84 04217 55 gal. 68 68.8/10.5 141 500-55.84 04549 5 gal. 100 93.6/12.9 136 500-44.84 04550 55 gal. 100 93.6/12.9 136 500-44.84
FOOD GRADE SYNTHETIC COMPRESSOR OIL Fully synthetic fluids blended from premium polyalphaolefin (PAO) base oils for use in compressor systems within the food industry. Excellent compatibility with elastomers, seals, plastics, and paints. Offers a wide temperature range and increased service life. 04202 5 gal. 32/46 42/7.6 150 501-58.85 04203 55 gal. 32/46 42/7.6 150 501-58.85 04206 5 gal. 68 59.7/9.8 150 501-53.87 04207 55 gal. 68 59.7/9.8 150 501-53.87 04543 5 gal. 100 98.7/14 145 526-48.85 04544 55 gal. 100 98.7/14 145 526-48.85 FOOD GRADE COMPRESSOR FLUSH For cleaning out systems prior to changing oil. A synthetic flushing fluid designed to remove varnish and sludge from compressors. It may be used as an intermediary step when transitioning from non-food grade to NSF Registered oils. May be used as a lubricant for up to 500 hours. 04584 5 gal. 46 46/8.0 135 518-22.95 04585 55 gal. 46 46/8.0 135 518-22.95 FOOD GRADE REFRIGERATION COMPRESSOR OIL Custom blended polyalphaolefin synthetic hydrocarbon fluid with additional seal treating properties. Conditions O-rings in ammonia systems and is compatible with mineral oils. Applications include: ice making, cold storage facilities and low temperature refrigeration systems. 04560 5 gal. 32 29.6/6.3 168 481-90.83 04561 55 gal. 32 29.6/6.3 168 481-90.83 04564 5 gal. 68 66.98/10.98 148 495-63.84 04565 55 gal. 68 66.98/10.98 148 495-63.84 FOOD GRADE SYNTHETIC GEAR OIL Fully synthetic, food grade gear oil formulated from premium polyalphaolefin (PAO) base oils. Excellent compatibility with elastomers, seals, plastics, and paints. Provides superior lubrication protection and includes extra additives to improve gasket and seal characteristics. ISO SAE Pour Point 04551 5 gal. 150 85W-90 147/17.6 132 460-35.85 04552 55 gal. 150 85W-90 147/17.6 132 460-35.85 04232 5 gal. 220 90 225.1/23.4 128 504-44.85 04233 55 gal. 220 90 225.1/23.4 128 504-44.85 04236 5 gal. 320 85W-140 319/30.5 132 518-40.85 04237 55 gal. 320 85W-140 319/30.5 132 518-40.85 04242 5 gal. 460 140 461/39.1 130 518-36.85 04243 55 gal. 460 140 461/39.1 130 518-36.85 04553 5 gal. 680 250 683/52 130 518-29.85 04554 55 gal. 680 250 683/52 130 518-29.85
FOOD GRADE AIR TOOL OIL Formulated with high quality polyalphaolefin (PAO) base oil to meet the lubrication requirements of air line equipment. Formulated with high performance antioxidants and anti-wear additives to meet the challenges of industrial environments. 04258 5 gal. 32 32/6.0 135 473-58.83 SYNTHETIC PAG (POLYALKYLENE GLYCOL) FOOD GRADE SYNTHETIC PAG GEAR OIL PAG gear oils are engineered to provide significantly improved wear, oxidation, and lubricity versus PAO and mineral-based gear oils. Typical applications include: helical, bevel, egg processing and worm gears. ISO SAE Pour Point 04570 5 gal. 150 85W-90 150/28.99 234 544-40 1.05 04571 55 gal. 150 85W-90 150/28.99 234 544-40 1.05 04572 5 gal. 220 90 220/36.8 218 544-40 1.05 04573 55 gal. 220 90 220/36.8 218 544-40 1.05 04574 5 gal. 320 85W-140 320/53.8 233 544-40 1.05 04575 55 gal. 320 85W-140 320/53.8 233 544-40 1.05 04576 5 gal. 460 140 460/77.3 248 554-36 1.06 04577 55 gal. 460 140 460/77.3 248 554-36 1.06 04578 5 gal. 680 250 650/128.5 299 554-36 1.06 04579 55 gal. 680 250 650/128.5 299 554-36 1.06 FOOD GRADE SYNTHETIC PAG CHAIN OIL High temperature synthetic PAG oils are biodegradable and have much higher load and wear properties than white oils or PAOs. 04580 5 gal. 130 130/22 198 560-38.99 04581 55 gal. 130 130/22 198 560-38.99 04582 5 gal. 220 224.3/32.8 192 540-20.99 04583 55 gal. 220 224.3/32.8 192 540-20.99 SYNTHETIC ESTER-BASED FOOD GRADE HIGH-TEMPERATURE SYNTHETIC CHAIN LUBE A fully synthetic chain lubricant formulated from premium ester-based oils. Designed for use on chains where excellent thermal stability and reduced deposit formation is required. Provides better load and wear properties than food grade white petroleum oils or PAOs. Wide operating temperature range (-5 F to 600 F). Good water and rust resistance. 04267 5 gal. 220 223/26.9 154 537-31.98 04268 55 gal. 220 223/26.9 154 537-31.98 = Acceptable as a lubricant with incidental contact. 3H = Acceptable for use as a release agent.
VIEW THE CRC FOOD GRADE EQUIPMENT LUBRICANTS CATALOG ELECTRONICALLY SCAN THIS CODE WITH YOUR MOBILE DEVICE 885 Louis Drive, Warminster, Pennsylvania 18974 Customer Care: (800) 272-4620 Facsimile: (800) 272-4560 Technical Assistance: (800) 521-3168 SDS Faxback System: (215) 442-6260 www.crcindustries.com/ei 2016 CRC Industries Inc. I0427-SS