Date of Preparation: October 24, 2005 Product Name: BLUE CREAM HARDENER Product Code: 309, 924, 1009 Emergency Phone: Chemtrec 800-424-9300 Company: Revision Number: 5 Intended Use: Curing agent. Bondo Corporation 3700 Atlanta Industrial Parkway NW Atlanta, GA 30331 Signs of Overexposure: Mild irritation. Material Safety Data Sheet Section 1 - Product Information Emergency Overview Emergency First Aid: Flush eyes for 20 minutes. Get immediate medical attention. Do not induce vomiting and seek medical attention immediately. Wash with soap and water. Handling: Avoid unnecessary exposure. Material Physical Appearance: Blue Paste Fire Fighting: Use water, carbon dioxide, etc., to extinguish. Your local fire department may require that you display the NFPA 704 diamond symbol on the front and/or rear entrance to your building. NFPA 704: Health: 1, Fire: 1, Reactivity: 0 Bondo Corporation has no oversight with respect to the guidance practices or policies or manufacturing processes of other companies handling or using this material. The information given in this MSDS is only related to the product as shipped in its original condition. The information contained in this safety data sheet does not constitute the user s own assessment of workplace risks as required by regulations. Section 2 - Hazardous Ingredients Chemical Name % CAS# OSHA Exposure Limits Benzoyl Peroxide 40.0-50.0 94-36-0 No PEL established water 20.0-30.0 7732-18-5 No PEL established C9-11-branched alkyl benzoate 10.0-20.0 131298-44-7 No PEL established Section 3 Hazards Identification Routes of Entry: Skin contact, Eye contact, Ingestion, Target Organs Potentially Affected by Exposure: Skin, Nervous System, Urinary Tract, Chemical Interactions That Change Toxicity: None Known, Medical Conditions Aggravated by Exposure: Skin disease including eczema and sensitization, Immediate (Acute) Health Effects by Route of Exposure Inhalation Irritation: No hazard in normal industrial use. Inhalation Toxicity: Non-Toxic. Not known to cause systemic damage.
Skin Contact: Can cause minor skin irritation, defatting, and dermatitis. Skin Absorption: No data. Eye contact: Can cause moderate irritation, tearing and reddening, but not likely to permanently injure eye tissue. Ingestion Irritation: Mildly irritating to mouth, throat, and stomach. Can cause abdominal discomfort. Ingestion Toxicity: slightly toxic Long-Term (Chronic) Health Effects Carcinogenicity: None of the substances have been shown to cause cancer in long term animal studies. Not a carcinogen according to NTP, IARC, or OSHA., Reproductive and Developmental Toxicity: No data available to indicate product or any components present at greater than 0.1% may cause birth defects. Mutagenicity: No data available to indicate product or any components present at greater than 0.1% is mutagenic or genotoxic. Inhalation: Upon prolonged and/or repeated exposure, no hazard in normal industrial use. Skin Contact: Upon prolonged or repeated contact, can cause minor skin irritation, defatting, and dermatitis. Skin Absorption: No data. Ingestion: slightly toxic Section 4 First Aid Measures Inhalation: This material does not present a hazard if inhaled. Remove individual to fresh air after an airborne exposure if any symptoms develop, as a precautionary measure. Eyes: Flush eyes with plenty of water for at least 20 minutes retracting eyelids often. Tilt the head to prevent chemical from transferring to the uncontaminated eye. Get immediate medical attention. Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists. Ingestion: Severely irritating. Do not induce vomiting. Seek medical attention immediately. Drink 2 glasses of water or milk to dilute. Notes to Doctor: No additional first aid information available Section 5 Fire Fighting Measures Flammability Summary: Combustible at elevated temperatures Extinguishing Media: Use water, carbon dioxide, etc., to extinguish. Fire and/or Explosion Hazards: Material may be ignited only if preheated to temperatures above the high flash point, for example in a fire. Fire Fighting Methods and Protection: Do not enter fire area without proper protection including selfcontained breathing apparatus and full protective equipment. Hazardous Combustion Products: Carbon dioxide, Carbon monoxide, Flash Point (SFCC): 277 deg. C 531 deg. F Lower Flammable/Explosive Limit: Not determined Section 6 - Accidental Release Personal Precautions and Equipment: No health affects expected from the clean-up of this material if contact can be avoided. Follow personal protective equipment recommendations found in Section 8 of this MSDS Methods for Clean-up: No special spill clean-up considerations. Collect and discard in regular trash. Section 7 Handling and Storage
Handling Technical Measures and Precautions: Mildly irritating material. Avoid unnecessary exposure. Storage Technical Measures and Conditions: Store in a cool dry place. Isolate from incompatible materials. Section 8 Exposure Controls/Personal Protection Engineering Measures: No exposure limits exist for the constituents of this product. No engineering controls are likely to be required to maintain operator comfort under normal conditions of use. Respiratory Protection: No respiratory protection required under normal conditions of use. Local exhaust preferable. General exhaust acceptable if the exposure to materials in Section 2 is maintained below applicable exposure limits. Refer to OSHA Standards 1910.94 Eye Protection: Wear chemically resistant safety glasses with side shields when handling this product. Wear additional eye protection such as chemical splash goggles and/or face shield when the possibility exists for eye contact with splashing or spraying liquid, or airborne material. Have an eye wash station available. Skin Protection: Avoid skin contact by wearing chemically resistant gloves, an apron and other protective equipment depending upon conditions of use. Inspect gloves for chemical break-through and replace at regular intervals. Clean protective equipment regularly. Wash hands and other exposed areas with mild soap and water before eating, drinking, and when leaving work. Gloves: Required for prolonged or repeated contact. Use solvent resistant gloves. Barrier creams are not substitutes for full physical protection. Refer to safety equipment supplier for effective glove recommendations. Control Parameters: Chemical Name ACGIH TLV-TWA ACGIH STEL IDLH Benzoyl Peroxide Not established Not established Not determined water Not established Not established Not determined C9-11-branched alkyl benzoate Not established Not established Not determined Section 9 Physical and Chemical Properties Physical State: Paste Color: Blue Odor: None ph: Not determined Solubility in Water: Not determined Volatiles, % by weight: 21.00 Volatiles, % by volume: 25.2 Volatile Organic Compounds excluding exempt solvents and water: 0.00 Lb/gallon 0.00 g/l Volatile Organic Compounds including exempt solvents and water: 0.00 LB/gallon 0.00 g/l Vapor Density: Vapor Pressure: Not determined Boiling Point: Not determined Specific Gravity: 1.33 Weight per Gallon: 10.0152 Stability: Stable under normal conditions. Section 10 Stability and Reactivity
Conditions to Avoid: Temperatures above the high flash point of this combustible material in combination with sparks, open flames, or other sources of ignition. Materials to Avoid/Chemical Incompatibility: Strong oxidizing agents, Hazardous Decomposition Products: Carbon dioxide, Carbon monoxide, Formaldehyde, Hydrocarbons Section 11 - Toxicological Information Sensitization (effects of repeated exposure): No data Component Toxicology Data (NIOSH) Chemical Name CAS Number LD50/LC50 Benzoyl Peroxide 94-36-0 LD50 Oral 1200 mg/m3 Mouse water 7732-18-5 No Data Available C9-11-branched alkyl benzoate 131298-44-7 No Data Available Section 12 - Ecological Information Overview: Avoid runoff into ground, storm drains or sewers that lead into waterways. Water runoff may cause environmental damage. There are extensive ecological data available on the various components of these products. An adequate representation of all these data is beyond the scope of this document. Please contact the information phone number found in Section 16. Section 13 Disposal Information Waste Description for Spent Product: Disposal Methods: Dispose of in accordance with federal, state or provincial and local pollution requirements. Clean preferably with a detergent, avoid the use of solvents. This information applies only to the material as manufactured; processing, use or contamination may make this information inappropriate, inaccurate or incomplete. The generator of the waste has the responsibility for proper waste classification, transportation and disposal. Waste Disposal Codes: Section 14 Transportation Information DOT Basic Description: Hazard Class: UN Number: Packing Group: DOT: Consumer Commodity, ORM-D IMDG: Organic Peroxide Type E, Solid (Dibenzoyl Peroxide Paste, 50%), 5.2, UN 3108, II, LTD QTY, EmS F-J, S-R ORM-D N/A N/A Section 15 - Regulatory Information Note: Materials listed in this section may be present as trace level contaminants to raw materials. Check Section 2 - Hazardous Ingredients to determine if a significant amount is present OSHA: This product is considered hazardous under the Federal OSHA Hazard Communication Standard. WHMIS: C, D2B, SARA Title III: Section 302 Extremely Hazardous Substances: None Section 311 / 312 Hazard Categories: Immediate health, delayed health, fire hazard. Section 313 Toxic Chemicals: Benzoyl peroxide,
You may be required to submit this MSDS to state and local emergency response agencies (SERC & LEPC) and to your local fire department. Also, you may be affected by other sections of this law, depending on the chemicals and amounts that you inventory at your location. To learn more about your responsibilities, call the EPA Hotline (800) 535-0202 TSCA status: All components in this product are on the TSCA Inventory. Canadian Domestic Substances List: The components of this product ARE listed on the Canadian Domestic Substances List. Proposition 65: This product DOES NOT contain a chemical regulated under California Proposition 65. Section 16 - Preparation Information Prepared by Bondo Corporation Information phone number: (404) 696-2730 Do not handle until the manufacturer s safety precautions have been read and understood. Regulations require that all employees be trained on Material Safety Data Sheets for all products with which they come in contact. While Bondo Corporation believes that the data contained herein are accurate and derived from qualified sources, the data are not to be taken as a warranty or representation for which Bondo Corporation assumes legal responsibility. They are offered solely for your consideration, investigation and verification. Any use of these data and information must be determined by the user to be in accordance with applicable federal, state or provincial and local laws and regulations.