omslag 31-03-2008 16:11 Pagina 1 Sonnecone Imagine a petrolatum as smooth and silky as a silicone
omslag 31-03-2008 16:11 Pagina 2
Binnenwerk 31-03-2008 16:09 Pagina 1 Introduction SONNEBORN REBORN Since the early 1900s, the Sonneborn name has been synonymous with the highest quality refined hydrocarbons in the world. While through the years our name has changed, one thing has remained consistent: our goal of providing our customers with premium products, superior technical support, and dependable service. Our customers are happy that some things never change. Sonneborn is the global leader in the manufacturing and supply of high-purity specialty hydrocarbons. With a wide offering of white oils, petrolatums and microcrystalline waxes produced both in North America and Europe, we are in an excellent position to efficiently serve the needs of our multinational customers. PETROLATUM THE MOISTURIZING STANDARD Sonneborn has the broadest product line in the industry. Our standard grades satisfy a broad spectrum of applications, and our custom-formulating ability helps us meet your most exacting specifications. We provide grades that meet the strict standards of European, United States, Japanese and other pharmacopoeias. We also provide products that conform to USDA and FDA classifications. In many personal care applications, petrolatum is generally regarded as the bench mark in terms of moisturizing and emolliency characteristics. 1
Binnenwerk 31-03-2008 16:09 Pagina 2 SONNECONE AN INNOVATIVE PRODUCT LINE While discussing our products with customers we often speak about the physical characteristics in order to define specifications and select suitable products. These discussions have led us into the fields of sensory evaluations, that are often decisive in the selection of raw materials. Inspired by this evolving trend, we have developed an innovative range of petrolatums with exceptional sensory attributes. Sonnecone products - petrolatums as smooth and silky as silicones. COST EFFECTIVE SUBSTITUTE FOR SILICONES The focus on sensory attributes has resulted in a range of products incorporating unique sensory attributes like a velvety, soft afterfeel, low tack and excellent spreadability. With these unique attributes, Sonnecone products can partially or completely substitute silicone oils like Cyclomethicone (Cyclopentasiloxane) and Dimethicone (Polydimethylsiloxane). With a clear cost difference between a silicone and a petrolatum, this can constitute huge savings. In the Cosmetic Formulations section you will find some state-of-the-art formulations based on Sonnecone products. 2
Tabblad_1a 01-04-2008 15:43 Pagina 1 Data sheets
Tabblad_1a 01-04-2008 15:43 Pagina 2
Binnenwerk 31-03-2008 16:09 Pagina 3 Product Data Sheet Sonnecone CM PETROLATUM WITH SILICONE-LIKE ATTRIBUTES Sonnecone CM (patent pending) is one of the recent additions to Sonneborn s extensive product portfolio that combines the advantages of a petrolatum with the easy handling and sensory feel of white mineral oils and silicones. Inspired by evolving market trends, we have developed a petrolatum that can be a suitable replacement for silicones in cosmetic formulations. It is an USP and EuP petrolatum that also meets the FDA requirements for food grade petrolatum in 21CFR 172.880. It is a soft, translucent-white, high gloss product with a light, dry application, good slip, short play time and powdery, soft afterfeel. The combination of softness and relatively low melting point makes it melt at skin temperature while featuring excellent spreadability and low tack. Special Attributes Suitable for mineral oil free formulations Melts at skin temperature Excellent spreadability Easy handling Low tack Possible substitute for cyclomethicone INCI name: Petrolatum Typical Properties Cone Penetration ASTM D937 270 dmm Drop Melting Point ASTM D127 41 C Color, Lovibond 2 IP 17 0.2 Y Purity USP, EuP complies Viscosity @ 25 C Dynamic Viscometer ~ 150,000 cps Sensory Attributes Initial feel After feel Play time - Dry, light and slippery - Very powdery, velvety and soft - Short play time, fast absorbing Applications The combination of a petrolatum with silicone-like properties makes this a very versatile product. Sonnecone CM is recommended for use in cosmetic applications where an emollient and moisturizer is required. Hand/Body Lotion Scalp protector Massage Cream Hair Conditioner Body Wash Sun care or SPF product The information in this data sheet is composed with due care and is generally correct to the best of Sonneborn s knowledge. However, Sonneborn accepts no liability for any damages resulting from the inaccuracy or incompleteness of the information provided. This data sheet is meant for information purposes only. Except as expressly stated otherwise no warranty, express or implied, is made with respect to the products described in this sheet. Any and all contracts, offers and data sheets are governed by Sonneborn s General Terms and Conditions. 3
Binnenwerk 31-03-2008 16:09 Pagina 4 Product Data Sheet Sonnecone DM1 PETROLATUM WITH SILICONE-LIKE ATTRIBUTES Sonnecone DM1 (patent pending) is one of the recent additions to Sonneborn s extensive product portfolio that combines the advantages of a petrolatum with the easy handling and sensory feel of white mineral oils and silicones. Inspired by evolving market trends, we have developed a petrolatum that can be a suitable replacement for silicones in cosmetic formulations. It is an USP and EuP petrolatum that also meets the FDA requirements for food grade petrolatum in 21CFR 172.880. It is a soft, translucent-white, high gloss product with good slip, long play time and soft, dry afterfeel. The combination of softness and relatively low melting point makes it melt at skin temperature while featuring excellent spreadability and low tack. Special Attributes Suitable for mineral oil free formulations Melts at skin temperature Excellent spreadability Easy handling Low tack Possible substitute for dimethicone INCI name: Petrolatum Typical Properties Cone Penetration ASTM D937 270 dmm Drop Melting Point ASTM D127 41 C Color, Lovibond 2 IP 17 0.2 Y Purity USP, EuP complies Viscosity @ 25 C Dynamic Viscometer ~ 150,000 cps Sensory Attributes Initial feel After feel Play time - Velvety feel - Soft and dry - Long play time Applications The combination of a petrolatum with silicone-like properties makes this a very versatile product. Sonnecone DM1 is recommended for use in cosmetic applications where an emollient and moisturizer is required. Hand/Body Lotion Scalp protector Massage Cream Hair Conditioner Body Wash Sun care or SPF product The information in this data sheet is composed with due care and is generally correct to the best of Sonneborn s knowledge. However, Sonneborn accepts no liability for any damages resulting from the inaccuracy or incompleteness of the information provided. This data sheet is meant for information purposes only. Except as expressly stated otherwise no warranty, express or implied, is made with respect to the products described in this sheet. Any and all contracts, offers and data sheets are governed by Sonneborn s General Terms and Conditions. 4
Binnenwerk 31-03-2008 16:09 Pagina 5 Product Data Sheet Sonnecone DM2 PETROLATUM WITH SILICONE-LIKE ATTRIBUTES Sonnecone DM2 (patent pending) is one of the recent additions to Sonneborn s extensive product portfolio that combines the advantages of a petrolatum with the easy handling and sensory feel of white mineral oils and silicones. Inspired by evolving market trends, we have developed a petrolatum that can be a suitable replacement for silicones in cosmetic formulations. It is an USP and EuP petrolatum that also meets the FDA requirements for food grade petrolatum in 21CFR 172.880. It is a soft, translucent-white, high gloss product with a soft, cushiony feel, average play time and velvety, powdery afterfeel. The combination of softness and relatively low melting point makes it melt at skin temperature while featuring excellent spreadability and low tack. Special Attributes Suitable for mineral oil free formulations Melts at skin temperature Excellent spreadability Easy handling Low tack Possible substitute for dimethicone INCI name: Petrolatum Typical Properties Cone Penetration ASTM D937 270 dmm Drop Melting Point ASTM D127 41 C Color, Lovibond 2 IP 17 0.2 Y Purity USP, EuP complies Viscosity @ 25 C Dynamic Viscometer ~ 150,000 cps Sensory Attributes Initial feel After feel Play time - Soft with high cushion - Velvety, powdery - Average play time Applications The combination of a petrolatum with silicone-like properties makes this a very versatile product. Sonnecone DM2 is recommended for use in cosmetic applications where an emollient and moisturizer is required. Hand/Body Lotion Scalp protector Massage Cream Hair Conditioner Body Wash Sun care or SPF product The information in this data sheet is composed with due care and is generally correct to the best of Sonneborn s knowledge. However, Sonneborn accepts no liability for any damages resulting from the inaccuracy or incompleteness of the information provided. This data sheet is meant for information purposes only. Except as expressly stated otherwise no warranty, express or implied, is made with respect to the products described in this sheet. Any and all contracts, offers and data sheets are governed by Sonneborn s General Terms and Conditions. 5
Binnenwerk 31-03-2008 16:09 Pagina 6 Product Data Sheet Sonnecone HV PETROLATUM WITH SILICONE-LIKE ATTRIBUTES Sonnecone HV is one of the recent additions to Sonneborn s extensive product portfolio that combines the advantages of a petrolatum with the easy handling and sensory feel of white mineral oils and silicones. Inspired by evolving market trends, we have developed a petrolatum that can be a suitable replacement for silicones in cosmetic formulations. It is an USP and EuP petrolatum that also meets the FDA requirements for food grade petrolatum in 21CFR 172.880. It is a soft, translucent-white, high gloss product with good slip, medium cushion and long play time. The combination of softness and relatively low melting point makes it melt at skin temperature while featuring excellent spreadability and low tack. Special Attributes Suitable for mineral oil free formulations Melts at skin temperature Excellent spreadability Easy handling Low tack INCI name: Petrolatum Typical Properties Cone Penetration ASTM D937 270 dmm Drop Melting Point ASTM D127 41 C Color, Lovibond 2 IP 17 0.2 Y Purity USP, EuP complies Viscosity @ 25 C Dynamic Viscometer ~ 300,000 cps Sensory Attributes Initial feel After feel Play time - Medium cushion - Soft - Long play time Applications The combination of a petrolatum with silicone-like properties makes this a very versatile product. Sonnecone HV is recommended for use in cosmetic applications where an emollient and moisturizer is required. Hand/Body Lotion Scalp protector Massage Cream Hair Conditioner Body Wash Sun care or SPF product The information in this data sheet is composed with due care and is generally correct to the best of Sonneborn s knowledge. However, Sonneborn accepts no liability for any damages resulting from the inaccuracy or incompleteness of the information provided. This data sheet is meant for information purposes only. Except as expressly stated otherwise no warranty, express or implied, is made with respect to the products described in this sheet. Any and all contracts, offers and data sheets are governed by Sonneborn s General Terms and Conditions. 6
Tabblad_1b 31-03-2008 16:00 Pagina 1 Cosmetic Formulations
Tabblad_1b 31-03-2008 16:00 Pagina 2
Binnenwerk 31-03-2008 16:09 Pagina 7 SONNECONE BASED COSMETIC FORMULATIONS This section focuses on the application of Sonnecone products in state-of-the-art cosmetic end product formulations. The intention is to demonstrate the versatility of the Sonnecone products as well as their substitute function for silicones. DISCLAIMER The information in this document is composed with due care and is generally correct to the best of Sonneborn s knowledge. However, Sonneborn accepts no liability for any damages resulting from the inaccuracy or incompleteness of the information provided. This document is meant for information purposes only. Except as expressly stated otherwise no warranty, express or implied, is made with respect to the products described in this data sheet. Any and all contracts, offers and product data sheets are governed by Sonneborn s General Terms and Conditions. 7
Binnenwerk 31-03-2008 16:09 Pagina 8 INDEX OF COSMETIC FORMULATIONS Skin Care Novel Skincare Emulsion w/ Sonnecone CM & DM1 Novel Skincare Emulsion w/ D5-D6 Silicone Light Facial Cream w/ Sonnecone HV Hand Cream with Sonnecone CM Elegant Daily Moisturizer w/ Sonnecone DM1 Lip Care Lip Protector SPF 15 w/ Sonnecone DM2 Sun Care Sunscreen Cream SPF 45 w/ Sonnecone CM Water-Resistant SPF 30 Sports Spray w/ Sonnecone CM Oil Free SPF 15 Lotion w/ Sonnecone CM After Sun Lotion w/ Sonnecone CM & DM2 Hair Care Moisturizing Hair Conditioner w/ Sonnecone DM2 Light Moisturing Hair Dress w/ Sonnecone CM Holding Wax w/ Sonnecone DM2 Basic Hair Dress w/ Sonnecone CM Scalp Repair w/ Sonnecone DM1 Clear Ringing Gel w/ Sonnecone CM 8
Binnenwerk 31-03-2008 16:09 Pagina 9 Novel Skincare Emulsion w/ Sonnecone CM & DM1* SEQUENCE PERCENT INGREDIENT INCI NAME 1 5.00 Sonnecone CM Petrolatum (Sonneborn Inc.) 1 10.00 DC 5225C Cyclopentasiloxane (and) PEG/ PPG-18/18 Dimethicone 1 1.00 Sonnecone DM1 Petrolatum (Sonneborn Inc.) 2 62.15 Deionized Water Water 2 0.10 Dissolvene Na2 Disodium EDTA 2 0.75 - Phenoxyethanol (and) Methylparaben (and) Ethylparaben (and) Butylparaben (and) Propylparaben (and) Isobutylparaben 2 18.00 Butylene Glycol Butylene 2 3.00 NaCl Sodium Chloride Procedure: 1. Combine Sequence #1 ingredients and heat to 40 C with high speed propeller mixing. Mix until homogenous. 2. In side kettle, combine Sequence #2 ingredients and heat to 80 C. Mix until free of particles and cool to 40 C. 3. Very, very slowly add Sequence #2 to Sequence #1 and mix with high speed propeller mixing. Mix well. 4. Switch to Silverson mixing and homogenize for 1 minute. 5. Package in suitable containers. Specifications: ph: N/A Viscosity: LV T-E @ 0.6 rpm 581,000cps 703,000 cps *Comparative Formulation 9
Binnenwerk 31-03-2008 16:09 Pagina 10 Novel Skincare Emulsion w/ D5-D6 Silicone* SEQUENCE PERCENT INGREDIENT INCI NAME 1 5.00 DC 345 Fluid Cyclopentasiloxane 1 10.00 DC 5225C Cyclopentasiloxane (and) PEG/ PPG-18/18 Dimethicone 1 1.00 DC 200, 20cs Dimethicone 2 62.15 Deionized Water Water 2 0.10 Dissolvene Na2 Disodium EDTA 2 0.75 - Phenoxyethanol (and) Methylparaben (and) Ethylparaben (and) Butylparaben (and) Propylparaben (and) Isobutylparaben 2 18.00 Butylene Glycol Butylene 2 3.00 NaCl Sodium Chloride Procedure: 1. At ambient temperature, combine Sequence #1 ingredients and mix with high speed propeller mixing. Mix until homogenous. 2. In side kettle, combine Sequence #2 ingredients and heat to 80 C. Mix until free of particles and cool to 40 C. 3. Very, very slowly add Sequence #2 to Sequence #1 and mix with high speed propeller mixing. Mix well. 4. Switch to Silverson mixing and homogenize for 1 minute. 5. Package in suitable containers. Specifications: ph: N/A Viscosity: LV T-E @ 0.6 rpm 282,000cps 321,000cps *Comparative Formulation 10
Binnenwerk 31-03-2008 16:09 Pagina 11 Light Facial Cream w/ Sonnecone HV SEQUENCE PERCENT INGREDIENT INCI NAME 1 72.80 Deionized Water Water 1 1.00 Symdiol 68t 1,2 Hexanediol (and) Caprylyl Glycol 1 2.50 Glycerin Glycerin 1 0.10 Dissolvine Na2 Disodium EDTA 2 2.00 Sepiplus 400 Polyacrylate-13 (and) Polyisobutene (and) Polysorbate 20 3 10.00 Sonnecone HV Petrolatum (Sonneborn) 3 1.50 - Simmondsia Chinensis (Jojoba) Seed Oil 3 0.10 Vitamin E Acetate Tocopheryl Acetate 3 8.00 Dragoxat EH Ethylhexyl Ethylhexanoate 3 2.00 - PEG-8 Laurate Procedure: 1. Combine Sequence #1 ingredients and heat to 78 80 C with moderate speed propeller mixing. 2. Add Sequence #2 to Sequence #1 with propeller mixing. 3. Combine Sequence #3 ingredients and heat to 60 C. Mix until clear and uniform. 4. Add Sequence #3 to batch with propeller mixing. 5. Allow batch to cool to 25 C. Specifications: ph: 5.4 5.8 Viscosity: LVT #4 @ 6rpm 65,000 80,000 cps 11
Binnenwerk 31-03-2008 16:09 Pagina 12 Hand Cream with Sonnecone CM SEQUENCE PERCENT INGREDIENT INCI NAME 1 32.15 Deionized Water Water 1 1.00 Botanistat PF-64 Phenoxyethanol (and) Ethylhexylglycerin (and) Hexylene Glycol (and) Caprylyl Glycol 1 10.00 Keltrol (1%) Xanthan Gum 1 10.00 Veegum HV (4%) Magnesium Aluminum Silicate 2 4.50 Montanov 68 Cetearyl Alcohol (and) Cetearyl Glucoside 2 30.00 Sonnecone CM Petrolatum (Sonneborn) 2 1.00 Jojoba Esters-70 Jojoba Esters 2 2.00 Stearic Acid Stearic Acid 2 0.10 Vitamin E Acetate Tocopheryl Acetate 2 0.75 - Myristyl Myristate 2 6.00 - Glyceryl Stearate (and) PEG-100 Stearate 2 2.50 Dow Corning Dimethicone 200/20cs Procedure: 1. Combine Sequence #1 ingredients and heat to 78 80 C with homogenizer mixing. 2. Heat Sequence #2 to 80 C and mix until clear and uniform. 3. Add Sequence #2 to Sequence #1 with homogenizer mixing. 4. Switch to propeller mixing and allow batch to cool to 25 C. Specifications: ph: 5.05 Viscosity: LV T-F @ 0.3rpm for 1 minute 2,537,000 cps 12
Binnenwerk 31-03-2008 16:09 Pagina 13 Elegant Daily Moisturizer w/ Sonnecone DM1 SEQUENCE PERCENT INGREDIENT INCI NAME 1 83.90 Deionized Water Water 1 0.10 Dissolvene Na2 Disodium EDTA 2 0.20 Ultrez 10 Carbomer 3 1.00 - Phenoxyethanol (and) Methylparaben (and) Ethylparaben (and) Butylparaben (and) Propylparaben (and) Isobutylparaben 3 1.00 Butylene Glycol Butylene Glycol 3 4.00 Glycerin Glycerin 4 4.50 Sonnecone DM1 Petrolatum (Sonneborn Inc.) 4 2.00 Stearic Acid Stearic Acid 4 1.50 - Glycol Stearate 4 0.50 - Glyceryl Stearate 4 0.50 - Hydrogenated Vegetable Oil 4 0.50 Botanisil DM-94 Dimethicone 5 0.50 NaOH (18%) Sodium Hydroxide Procedure: 1. In main kettle, combine Sequence #1 and mix until Na2 is dissolved (heat the water to about 40 C, if necessary). Discontinue mixing. 2. Slowly sprinkle Sequence #2 on the surface of the water and allow to self-wet (approximately 10 15 minutes). 3. Begin heating combined Sequences #1 and #2 to 80 C with low speed propeller mixing. 4. At 80 C, add Sequence #3 ingredients and mix well. Maintain temperature at 80 C. 5. Combine Sequence #4 and heat to 78 C 80 C. Mix until all solids have dissolved. 6. Slowly add Sequence #4 to the batch and mix for 15 20 minutes. Begin cooling. 7. Add Sequence #5 and mix well. 8. Continue cooling to 25 C. Specifications: ph: 6.02 Viscosity: LV TE @ 3rpm 126,500 cps 13
Binnenwerk 31-03-2008 16:09 Pagina 14 Lip Protector SPF 15* w/ Sonnecone DM2 SEQUENCE PERCENT INGREDIENT INCI NAME 1 56.60 Sonnecone DM2 Petrolatum (Sonneborn Inc.) 1 11.00 Multiwax 180-W Microcrystalline Wax (Sonneborn Inc.) 1 0.10 Vitamin E Acetate Tocopheryl Acetate 1 8.00 White Bleached Beeswax 1 7.50 Neo Heliopan AV Ethylhexyl Methoxycinnamate 1 4.00 Neo Heliopan BB Benzophenone-3 1 0.30 Cetiol SB-45 Butyrospermum Parkii (Shea Butter) Fruit 1 0.50 - Cocos Nucifera (Coconut) Oil 1 10.00 Carnuba Wax Copernicia Cerifera (Carnuba) Wax 1 2.00 Grape Type Flavor Flavor OS Natural & Artificial Procedure: 1. Combine Sequence #1 ingredients and heat to 80 C 85 C. 2. Mix until clear and free of particles then begin cooling. 3. When temperature reaches 70 C 75 C, pour into suitable containers. Specifications: ph: N/A Viscosity: N/A * Proposed SPF 14
Binnenwerk 31-03-2008 16:09 Pagina 15 Sunscreen Cream SPF 45* w/ Sonnecone CM SEQUENCE PERCENT INGREDIENT INCI NAME 1 40.05 Deionized Water Water 1 0.10 Dissolvene Na2 Disodium EDTA 1 1.00 Botanistat PF-64 Phenoxyethanol (and) Caprylyl Glycol (and) Ethylhexylglycerin (and) Hexylene Glycol 1 3.50 Glycerin Glycerin 1 0.10 Allantoin Allantoin 1 10.00 Keltrol (1%) Xanthan Gum 2 6.00 Emulium 22 Tribehenin PEG-20 Esters 2 7.50 Neo Heliopan AV Ethylhexyl Methoxycinnamate 2 3.00 Neo Heliopan OS Ethylhexyl Salicylate 2 1.50 Neo Heliopan BB Benzophenone-3 2 10.00 Neo Heliopan 303 Octocrylene 2 0.25 Cetiol SB-45 Butyrospermum Parkii (Shea Butter) Fruit 2 2.50 Softisan 100 Hydrogenated Coco-Glycerides 2 4.00 Sonnecone CM Petrolatum (Sonneborn Inc.) 3 10.00 TNP40VTTS C12-15 Alkyl Benzoate (and) Titanium Dioxide (and) Alumina (and) Polyhydroxystearic Acid (and) Isopropyl Titanium Triisostearate (and) (and)triethoxycaprylylsilane Crosspolymer 4 0.50 Actiphyte of Aloe Propylene Glycol (and) Water (and) Aloe 10 Fold Aqueous Barbadensis Leaf Extract 5 qs NaOH (18%) Sodium Hydroxide *Proposed SPF 15
Binnenwerk 31-03-2008 16:09 Pagina 16 Water-Resistant SPF 30* Sports Spray w/ Sonnecone CM SEQUENCE PERCENT INGREDIENT INCI NAME 1 54.05 Deionized Water Water 1 0.10 Dissolvene Na2 Disodium EDTA 1 3.50 Butylene Glycol Butylene Glycol 1 3.75 Ceralution F Sodium Dicocoylethylenediamine PEG-15 Sulfate (and) Sodium Lauroyl Lactylate 1 10.00 Keltrol (1%) Xanthan Gum 2 2.00 Performa V 1608 C30-38 Olefin/ Isopropyl Maleate/ MA Polymer Copolymer 2 3.25 Ceralution H Behenyl Alcohol (and) Glyceryl Stearate (and) Glyceryl Stearate Citrate (and) Sodium Dicocoylethylenediamine PEG-15 Sulfate 2 2.00 Neo Heliopan OS Ethylhexyl Salicylate 2 4.00 Neo Heliopan BB Benzophenone-3 2 5.00 Corpan TQ Diethylhexyl 2,6-Napthalate 2 3.00 Neo Heliopan 357 Butyl Methoxydibenzoylmethane 2 0.25 Mango Butter Mangifera Indica (Mango) Seed Butter 2 0.10 Vitamin E Acetate Tocopheryl Acetate 2 3.50 Dracorin GOC Glyceryl Oleate Citrate (and) Caprylic/Capric Triglyceride 2 4.00 Sonnecone CM Petrolatum (Sonneborn Inc) 3 1.00 Botanistat PF-64 Phenoxyethanol (and) Caprylyl Glycol (and) Ethylhexylglycerin (and) Hexylene Glycol 4 0.50 Actiphyte of Aloe Propylene Glycol (and) Water (and) Aloe 10 Fold Aqueous Barbadensis Leaf Extract *Proposed SPF 16
Binnenwerk 31-03-2008 16:09 Pagina 17 Oil Free SPF 15* Lotion w/ Sonnecone CM SEQUENCE PERCENT INGREDIENT INCI NAME 1 2.10 Arlacel 165 Glyceryl Stearate (and) PEG-100 Stearate 1 0.90 Montanov S Coco-Glucoside (and) Coconut Alcohol 1 15.00 Sonnecone CM Petrolatum (Sonneborn Inc.) 1 3.00 Neo Heliopan 357 Butyl Methoxydibenzoylmethane 1 5.00 Neo Heliopan OS Octyl Salicylate 1 4.00 Corapan TQ Diethylhexyl 2,6-Naphthalate 1 1.50 Softisan 100 Hydrogenated Coco Glycerides 1 0.10 Bisabolol Bisabolol 2 1.50 Sepigel 305 Polyacrylamide (and) C13-14 Isoparaffin (and) Laureth-7 3 60.55 Deionized Water Water 3 1.00 Botanistat PF-64 Phenoxyethanol (and) Caprylyl Glycol (and) Ethylhexylglycerin (and) Hexylene Glycol 3 5.00 Glycerin Glycerin 3 0.10 Dissolvine Na2 Disodium EDTA 3 0.25 Vedasolve 156 Butylene Glycol (and) Withania Somnifera (and) Glycyrrhiza Glabra (and) Phyllanthus Emblica Procedure: 1. Combine Sequence #1 ingredients with moderate speed propeller mixing. Heat to 78 80 C. 2. Add Sequence #2 and mix until uniform. 3. Combine Sequence #3 ingredients, heat to 80 C with propeller mixing. Mix until clear. 4. Slowly add Sequence #3 to combined Sequences 1 & 2, and mix for 15 minutes. 5. Cool to 25 C. Specifications: ph: 4.98 5.02 Viscosity: LVT #4 @ 12 rpm 30,200cps *Proposed SPF. 17
Binnenwerk 31-03-2008 16:09 Pagina 18 After Sun Lotion w/ Sonnecone CM & DM2 SEQUENCE PERCENT INGREDIENT INCI NAME 1 68.40 Deionized Water Water 2 0.20 Ultrez 10 Carbomer 3 0.10 Dissolvene Na2 Disodium EDTA 3 1.00 Botanistat PF-64 Phenoxyethanol (and) Caprylyl Glycol (and) Ethylhexylglycerin (and) Hexylene Glycol 3 2.50 Butylene Glycol Butylene Glycol 3 3.50 Glycerin Glycerin 3 0.10 Allantoin Allantoin 3 3.00 Botanivera WL 1X Aloe Barbadensis Leaf Juice 4 1.50 Sonnecone DM2 Petrolatum (Sonneborn Inc.) 4 7.75 Sonnecone CM Petrolatum (Sonneborn Inc.) 4 3.75 Net LCS Caprylic/Capric Triglyceride (and) Hydrogenated Lecithin (and) Cetyl Alcohol Stearyl Alcohol (and) Phytosterol (and) Glyceryl Stearate (and) POE-20 Soy Sterol 4 0.10 - Bisabolol 4 0.50 - PEG-100 Stearate 4 0.10 Vitamin E Acetate Tocopheryl Acetate 4 4.00 Nikkol CIO Cetyl Ethylhexanoate 4 0.25 Capuacu Butter Theobroma Grandiflorum Seed Butter 5 0.25 NaOH (18%) Sodium Hydroxide 6 0.50 Gorgonian Extract GC Caprylic/Capric Triglyceride (and) Sea Whip Extract 6 1.00 Barsil 2001 Dimethicone 7 0.50 Willowherb Extract Epilobium Angustifoilium Extract 5% Clear 7 1.00 - SodiumHyaluronate (and) Echinacin Barbadensis Leaf Extract Procedure: 1. In main beaker, weigh sequence #1. 2. Slowly sprinkle sequence #2 onto the surface of the water and allow to self-wet (15 20 minutes). 3. Using low speed propeller mixing, heat combined sequences #1 and #2 to 80 C. 4. At 80 C, add sequence #3 ingredients and mix well. Maintain batch temperature at 80 C. 5. In another beaker, combine sequence #4 ingredients and heat to 80 C (do not exceed 80 C) and mix until clear. 6. Slowly add sequence #4 to the batch and mix for 15 minutes or until emulsification is complete. 7. Add sequence #5 and mix well, increasing mixing speed as necessary. Begin cooling. 8. At 40 C, add sequence #6 and mix well. Continue cooling. 9. At 25 C, add sequence #7 ingredients and mix well. Specifications: ph: 5.76 Viscosity: LV T D @ 3 rpm 31,370 cps 18
Binnenwerk 31-03-2008 16:09 Pagina 19 Moisturizing Hair Conditioner w/ Sonnecone DM2 SEQUENCE PERCENT INGREDIENT INCI NAME 1 79.50 Deionized Water Water 1 0.10 Dissolvene Na2 Disodium EDTA 1 0.25 Botanistat PF-64 Phenoxyethanol (and) Caprylyl Glycol (and) Ethylhexylglycerin (and) Hexeylene Glycol 1 3.50 Glycerin Gylcerin 1 5.00 Incroquat Behenyl Behentrimonium Chloride TMC-85 2 5.50 Sonnecone DM2 Petrolatum (Sonneborn Inc.) 2 0.25 - Triticum Vulgare (Wheat) Germ Oil 2 0.10 Vitamin E Acetate Tocopheryl Acetate 2 2.00 - Cetyl Alcohol 2 3.00 - Cetearyl Alcohol (and) Polysorbate 60 3 0.30 - DMDM Hydantoin 4 0.50 Hydrotriticum 2000 Hydrolyzed Wheat Protein 5 qs Citric Acid (50%) Citric Acid Procedure: 1. In main kettle, heat Sequence #1 to 80 C with medium speed propeller mixing. 2. In side kettle, combine Sequence #2 ingredients and heat to 80 C. Mix until all waxes are melted. 3. Slowly add Sequence #2 to Sequence #1 and mix for 15 minutes. Begin cooling. 4. At 30 C, add Sequence #3 and Sequence #4 and mix well. 5. Adjust ph to 3.5 3.7 with Sequence #5. Specifications: ph: 3.56 Viscosity: LV T-D @ 0.3 rpm 371,200 cps 19
Binnenwerk 31-03-2008 16:09 Pagina 20 Light Moisturing Hair Dress w/ Sonnecone CM SEQUENCE PERCENT INGREDIENT INCI NAME 1 86.00 Deionized Water Water 1 1.75 Honey Honey 1 0.10 Panthenol Panthenol 1 1.00 Botanistat PF-64 Phenoxyethanol (and) Caprylyl Glycol (and) Hexylene Glycol 2 4.00 Salcare SC-92 Polyquaternium-32 (and) Mineral Oil 3 3.00 Sonnecone CM Petrolatum (Sonneborn) 3 0.50 - Olea Europaea (Olive) Fruit Oil 3 0.50 - Glycine Soja (Soybean) Oil 3 0.50 - Triticum Vulgare (Wheat) Germ Oil 3 0.25 Mango Butter Mangifera Indica (Mango) Seed Butter 3 1.00 - Polysorbate-60 3 0.50 - Polysorbate-80 3 0.10 Vitamin E Acetate Tocopheryl Acetate 4 0.05 Vitamin A Palmitate Retinyl Palmitate 4 0.20 Goji Berry Fragrance Fragrance 4 0.15 Pineapple Coconut Fragrance Fragrance 5 0.10 Actiphyte of Aloe Propylene Glycol (and) Water (and) Aloe Vera 10 Fold Barbadensis Leaf Extract 5 0.10 Actiphyte of Ginger Butylene Glycol (and) Water (and) Zingiber Root BG 50 Officinale (Ginger) Root Extract 5 0.10 Actiphyte of Burdock Butylene Glycol (and) Water (and) Arcticum Root BG 50 Lappa Root Extract 5 0.10 Actiphyte of Elder- Butylene Glycol (and) Water (and) Sambucus flower BG 50 Nigra Flower Extract Procedure: 1. In main beaker, combine Sequence #1 ingredients and heat to 80 C with medium speed propeller mixing. Mix until clear. 2. Slowly add Sequence #2, increasing mixing speed as necessary. Mix until homogenous and free of lumps. 3. In another beaker, combine Sequence #3 ingredients and heat to 80 C and mix until clear. 4. Slowly add Sequence #3 to the batch and mix for 10 minutes or until emulsification is complete. Begin cooling. 5. When batch temperature reaches 40 C, add Sequence #4 ingredients and mix well. Continue cooling. 6. At 25 C, add Sequence #5 ingredients and mix well. 7. Package in suitable containers. Specifications: ph: 3.27 Viscosity: LVT-E @ 1.5 rpm 751,300 cps 20
Binnenwerk 31-03-2008 16:09 Pagina 21 Holding Wax w/ Sonnecone DM2 SEQUENCE PERCENT INGREDIENT INCI NAME 1 67.00 Sonnecone DM 2 Petrolatum (Sonneborn) 1 20.00 Multiwax W-445 Microcrystalline Wax (Sonneborn) 1 10.00 Beeswax, White Beeswax 1 1.00 Cetiol SB-45 Butyrospermum Parkii (Shea Butter) Fruit 1 0.50 Bois II Santalum Album (Sandalwood) Wood Extract (and) Phellodendron Amurense Extract (and) Hordeum Distichon (Barley) Extract 1 1.00 - Phenoxyethanol (and) Methylparaben (and) Ethylparaben (and) Butylparaben (and) Propylparaben (and) Isobutylparaben 2 0.50 Pineapple Coconut Fragrance Fragrance Procedure: 1. In main beaker, combine Sequence #1 ingredients and heat to 80 C 85 C with medium speed propeller mixing. 2. Mix until clear then begin cooling. 3. At 75 C, add Sequence #2 and mix well. 4. Pour into suitable containers at 70 C 75 C. Specifications: ph: N/A Viscosity: LVT-F @ 0.3 rpm for 50 seconds 3,121,00 cps 21
Binnenwerk 31-03-2008 16:09 Pagina 22 Basic Hair Dress w/ Sonnecone CM SEQUENCE PERCENT INGREDIENT INCI NAME 1 64.11 Sonnecone CM Petrolatum (Sonneborn) 1 10.00 40 Oil Mineral Oil (Sonneborn) 1 5.00 Lanolin, Superfine Lanolin 1 20.00 Multiwax W-445 Microcrystalline Wax (Sonneborn) 1 0.20 Vitamin E Tocopheryl 1 1.00 Embanox BHT BHT 2 0.50 Pinacolada Fragrance Fragrance 2 0.09 D&C Red #17 D&C Red #17 (0.1% in 40 Oil) Procedure: 1. In main beaker, combine Sequence #1 ingredients and heat to 80 C 85 C with medium speed propeller mixing. 2. Mix until clear then begin cooling. 3. At 75 C, add Sequence #2 and mix well. 4. Pour into suitable containers at 70 C 75 C. Specifications: ph: N/A Viscosity: LVT-F @ 0.3 rpm 2,415,000 cps 22
Binnenwerk 31-03-2008 16:09 Pagina 23 Scalp Repair w/ Sonnecone DM1 SEQUENCE PERCENT INGREDIENT INCI NAME 1 50.00 Sonnecone DM 1 Petrolatum (Sonneborn) 1 25.00 - Isopropyl Palmitate 1 24.09 Klearol Mineral Oil (Sonneborn) 1 0.10 Bisabolol Bisabolol 1 0.25 Botaniceutical BR-1 Caprylic/Capric Triglyceride (and) Linoleic Acid (and) Glycine Soja (Soybean) Sterols (and) Phospholipids 2 0.50 Gorgonian Extract Caprylic/Capric Triglyceride (and) Sea GC Whip Extract 2 0.06 D&C Violet #2 D&C Violet #2 (0.04% in IPP) Procedure: 1. In main beaker, combine Sequence #1 ingredients and heat to 80 C with medium speed propeller mixing. 2. Mix until clear then begin cooling. 3. At 40 C, add Sequence #2 and mix well. 4. Pour into suitable containers at 35 C 40 C. Specifications: ph: N/A Viscosity: LVT #3 @ 30 rpm 396.0 cps 23
Binnenwerk 31-03-2008 16:09 Pagina 24 Clear Ringing Gel w/ Sonnecone CM SEQUENCE PERCENT INGREDIENT INCI NAME 1 56.99 Deionized Water Water 1 1.00 - Phenoxyethanol (and) Methylparaben (and) Ethylparaben (and) Butylparaben (and) Propylparaben (and) Isobutylparaben 1 12.00 Butylene Glycol Butylene Glycol 1 0.01 FD&C Red #33 FD&C Red #33 (1% aq. Solution) 2 6.00 Crodafos N-10 DEA-Oleth-10 Phosphate Neutral 2 5.00 - Oleth-5 2 4.00 - Oleth-3 2 15.00 Sonnecone CM Petrolatum (Sonneborn) Procedure: 1. In main beaker, combine Sequence #1 ingredients and heat to 85 C 87 C with medium speed propeller mixing. 2. In a separate beaker, combine Sequence #2 ingredients and heat to 85 C 87 C. Mix until clear with medium/low speed propeller mixing. 3. Slowly add Sequence #2 to Sequence #1 and mix until smooth. 4. Pour into suitable containers at 83 C 85 C. Specifications: ph: 6.60 Viscosity: LV T-E @ 0.3rpm 1,357,000 cps 24
omslag 31-03-2008 16:11 Pagina 4
omslag 31-03-2008 16:11 Pagina 3 CONTACT SONNEBORN Europe Wezelstraat 12 1541 LZ Koog aan de Zaan The Netherlands +31.75.6283854 info.eu@sonneborn.com North America 575 Corporate Drive Suite 415 Mahwah, NJ 07430 United States of America Inside the U.S. 877-948-2688 Outside the U.S. 724-756-9595 Asia/Pacific 43 Cambrai Avenue Engadine NSW 2233 Australia +61.418.461.951 Website Our website contains detailed information on the complete Sonneborn product range. It provides the facility to download brochures, product data sheets and material safety data sheets of our main grades. Visit our website at www.sonneborn.com