Sears Holdings Management Corporation FLOOR READY GUIDELINES

Sears Holdings Management Corporation FLOOR READY GUIDELINES 2007 Sears Brands, LLC April 2007

ACCESSORIES Headwear - Hats, Visors, Caps All Categories ACC.HTS.CPS.VSR.01 HATS: Insert MAIN label into interior grosgrain center back seam, Combined CARE and CONTENT label is inserted into interior grosgrain seam, center back, under MAIN label, Label Centered at Center Back Interior Grosgrain WESTERN HATS: Insert MAIN label into trim center back seam, Combined CARE and CONTENT label is inserted into interior trim seam, center back, under MAIN label, Label Centered at Center Back Interior Grosgrain Interior Interior Grosgrain Center Back Interior Interior Grosgrain If packaging/tags are required attach as described in this section. > Hangtag: Use 1 swift-attachment to attach as shown below for each style unless otherwise specified in the product specification package or by the Buyer. > Generic Price Ticket: Swift-Attach blank side of price ticket to back side of hangtag. Hangtag front must be visible. > Feature Sticker: Adhere to headwear as directed in product specification package or by Buyer. HATS Option 1 Attach with J-Hook at center top through seam or stitch line. Option 2 Attach with J-Hook at center back through fold as shown. J-HOOK Option 3 Attach with J-Hook at center back through or stitch as shown. CAPS: Insert MAIN label into gore seam at top of interior band, 1 1/2 into wearer's LEFT of center back seam. Combined CARE and CONTENT label is inserted under MAIN label, Gore Label Placement 1 1/2 at Wearer s Left Interior Band Interior Band 1 1/2 Lining VISORS: : Visors with closed back. Insert MAIN label into binding seam, 1 1/2 to wearer s LEFT of center back. Combined CARE and CONTENT label is inserted into binding seam under MAIN label, : Visors with open back. Insert MAIN label into binding seam, 1 1/2 to wearer s LEFT of center back. Combined CARE and CONTENT label is inserted into binding seam under MAIN label, 1 1/2 Label Placement 1 1/2 at Wearer s Left Interior Band Lining Interior Band Binding Label Placement 1 1/4 at Wearer s Left Interior Band Lining Interior Band Binding > Pack product for shipping per the instructions that are provided in the product specification package or by the buyer. TOP VIEW TOP VIEW TOP VIEW WESTERN HATS Attach J-Hook at center back through center back seam or edge stitch line, CAPS Attach with J-Hook through center back seam behind top button. OPEN CROWN VISORS > For visors with CLOSED back. Attach with J-Hook at binding stitch line, top edge, center back. > For visors with OPEN back. Attach with J-Hook at stitch line at top back edge, wearer s LEFT side. TOP VIEW CENTER BACK SEAM 2007 Sears Brands, LLC April 2007 Page 1

ACCESSORIES Cold Weather, Knitwear, Fashion Scarves All Categories ACC.CW.ALL.02 Unless otherwise specified, attach labels as described below. HATS: : Insert a loop MAIN label into the center back seam, 2 up from bottom of hat. If hat has a cuff, label should be inserted into the back seam, 2 up from 2 bottom of fold (as shown). For reversible garments, use a tear-out ticket/sticker placed at the same location. : Insert a loop MAIN label into the wearer s left side seam, 2 up from bottom of hat. If hat has a cuff, label should be inserted into the wearer s left 2 side seam, 2 up from fold. For reversible garments, use a tear-out ticket/sticker placed at the same location. GLOVES: : Insert INTEGRATED loop label (brand, care and content, country of origin) into wearer s left out seam of glove/mitten, 1 down from wrist seam/cuff. : Tack INTEGRATED label into wearer s left glove/mitten at wrist seam. SCARF: Sew End Fold MAIN label. Sew label 1 in from selvage and 1 up from bottom. Integrated CARE & CONTENT label is attached to bottom of MAIN label, RUANA: Attach an End Fold MAIN label 1 down from neck edge or seam, A combined CARE & CONTENT should be attached to of bottom edge of MAIN label (as shown), centered width-wise. > Place no more than 6 pieces to one polybag. Alternate prior to placing into polybag. Individual Polybags will only be used for delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and highly detailed styles (ie., flowers, bows, etc.). Use individual polybags only if noted in product specification package or by the Buyer. If packaging/tags are required attach as described in this section. > Hangtag: Use 1 swift-attachment to attach as shown below for each style (unless otherwise specified). > Generic Price Ticket: Swift-Attach blank side of price ticket to back side of hangtag. Hangtag front must be visible. > Generic Hangtag/Garment Feature Hangtag or Sticker: Adhere to headwear as directed in product specification package or by the Buyer. KNIT HATS Attach hangtag and J hook through TOP center of crown. RUANA : Attach hangtag through the back side of CARE/CONTENT label in garment s neck. : Attach through the inside seam allowance of the wearer s left side. SCARVES Hangers are specified in the product specification package or by the Buyer. - Preferred Attach the hangtag/price ticket through sewn-in care label using a 1 securitach. - Secondary Attach the hangtag/price ticket through the first two fold layers of scarf using a 1 securitach, 3/4 down from hanger bottom. GLOVES/MITTENS - 1 PAIR : Attach hangtag/price ticket and plastic J hook through the top center of cuff. The plastic J hook should be positioned between gloves/mittens. Only swift-tack through palm side of second glove to allow customer to try LEFT glove/mitten on for size. Gloves should be attached palm to palm. : For leather gloves attach hangtag through lining only. GLOVES/MITTENS - MULTIPLE PAIRS : Swift-attach plastic J hook between the pairs. Swift-tack through one side of second glove/mitten to allow customer to try glove/mitten for size. Hangtags are swift-attached through just the outside of the front glove/mitten. When viewed from the front, J-Hook should face left, thumbs should face right. : Swift-attach plastic J hook between the inside glove/mitten of each pair. Place header card over wrist of all gloves/ mitten pairs, Swift-attach through both sides of the header card. Brand name should be visible when viewing the front. Thumbs and J-Hook face the RIGHT when viewed from the front. HAT & GLOVE/MITTEN SET Attach hangtag/price ticket and plastic J hook through the top center of cuff. The plastic J hook should be positioned between gloves. Swift-tack through the hat, right glove/mitten and inside cuff of left glove. Gloves should be attached palm to palm. HAT, SCARF & GLOVE/MITTEN SET ADULT: : Hang scarf through hanger and Swift-attach gloves on left and hat on right as shown. : Hang scarf through hanger and Swift-attach gloves over hat centered as shown. CHILDREN: Place scarf under hat with J-Hook in between. Place gloves/mittens over hat as shown. Swift-attach all pieces together at left, center and sides to secure.. ADULT Option 1 Option 2 Option 1 Option 2 Option 1 Option 2 Option 1 ADULT Option 2 SWIFT-ATTACH CHILDREN 2007 Sears Brands, LLC April 2007 Page 2

ACCESSORIES Handbags, Messenger Bags, Backpacks, Slings, Fanny Packs, Belt Bags, Clutch Bags, Coin Purses, Smoke Totes, Wallets All Product Categories ACC.HNDBG.03 Unless product specification package states otherwise, attach as described below. > Attach MAIN, CARE and CONTENT labels as specified in the product specification package or by the Buyer. > Be sure country of origin (COO) labels align to regulatory guidelines as needed. If packaging/tags are required attach as described in this section. > Hangtag: Use 1 securitach to attach as shown below for each style (unless noted otherwise). > Generic Price Ticket: Swift-attach blank side of price ticket to back side of hangtag. Hangtag front must be visible. > Feature Hangtag/Sticker: Adhere to product as directed in product specification package or by the Buyer. HANDBAG/MESSENGER WITH STRAPS Attach the hangtag/price ticket around strap or through ring. > Fill product with stuffing as outlined in the product specification package or by the Buyer. > Provide additional protection for any metal or fragile ornamentation on the product. > Place each item in a polybag. For leather or vinyl products, the polybags must include air holes. > Alternate when placing into cartons for shipping. TISSUE CLUTCH BAG, WALLET, COIN PURSE, SMOKE TOTE, EYEGLASS CASE, MAKEUP POUCH, BILL FOLD : Attach the hangtag/price ticket around strap or through rivet hole of frame joint. : Attach the hangtag/price ticket through hole at end of zipper pull. OPTION 3: Attach the hangtag/price ticket through zipper tape closest to the zipper pull. 1 2 OPTION 3 CLUTCH WITHOUT FRAME Attach the hangtag/price ticket through the seam at top of clutch or inside handle. Ticket must hang on outside of clutch. BACKPACK/SLINGS Attach hangtag/price ticket at ONE of the following locations: (A) Around handle (B) Through hole at end of zipper pull (C) Through zipper tape at left side A 3 A FANNY PACK/BELT BAG Attach the hangtag/price ticket around strap OR through webbing (A) or through hole at end of zipper pull (B). B C B 2007 Sears Brands, LLC April 2007 Page 3

ACCESSORIES Ties All Categories ACC.TIES.04 BACK VIEW > MAIN label: Sew End Fold back side of tie front. Top of label should begin 8 1/5 from center front point of tie. > CARE label: Loop label sewn into left seam, back side of narrow end, > FEATURE label: End sew label on left seam of tie back of tie front. MAIN label TIE CARD > Tie Card: Fold Tie Card using self-adhesive to close around middle of tie. Tuck bottom of Tie Care in and under end sew MAIN label. > Hangtag: Use 1 swift-attachment to attach end sew MAIN label. 8 1/2 CARE label FEATURE label BACK VIEW FRONT VIEW HANGER/STORE PRESENTATION > Place each tie on hanger into and individual polybag unless otherwise specified. > Alternate when placing into carton. Slip Folds through upper and lower slots on hanger. Fold in half Fold in half again FINISHED BACK VIEW FINISHED FRONT VIEW 2007 Sears Brands, LLC April 2007 Page 4

ACCESSORIES Belts All Categories ACC.BELTS.05 If packaging/tags are required attach as described in this section. > Hangtag: Use 1" securitack to attach through the belt buckle. : Swift-Attach blank side of price ticket to back side of hangtag. Hangtag front must be visible. : Attach adhesive pre-price sticker to back side of belt hanger, centered width-wise. OPTION 3: Sew price ticket to back side of belt at seam, centered width-wise. > Generic Price Ticket/Sticker: Adhere to belt as specified in product specification package or by Buyer. NOTE: For Care, Content And Country Of Origin (COO) placement refer to product specification package or the Buyer. Vendor is responsible to insure alignment to all regulations. Attach the hangtag/price ticket through belt buckle with 1 securitach. Attach adhesive pre-price sticker to back side of belt hanger. Hangtag Price Ticket Adhesive Price Ticket OPTION 3 Sew price ticket to back side of belt on same end that buckle is attached. Sew-In Price Ticket FRONT VIEW BACK VIEW BACK VIEW STORE PRESENTATION 1. Place belt hanger through buckle from the back. 2. Slide prong of buckle through T shaped slot in belt hanger. 3. Bend bottom of belt hanger upward. 4. Push prong of belt hanger through round slot to secure. FRONT VIEW BACK VIEW 1. Vendor needs to place belt on specified hanger prior to packing in carton. 2. Wrap metal or delicate buckles in tissue paper or cover with plastic bag/bubble wrap to protect during shipment. : 3. Coil 3 belts together and place in one polybag. For leather or vinyl belts, the polybag must have air holes. 4. Do not band belts together. 5. Alternate polybags when placing into cartons. : 3. Place belts laying flat into polybag. Do not place more than 6 belts into one polybag. 4. Do not band belts together. 5. Alternate in groups of 6 when placing into cartons. Metal Buckle Wrapped in Tissue Paper Polybag with Holes for Leather or Vinyl Belts. 2007 Sears Brands, LLC April 2007 Page 5

BLAZERS WITH SEEDED HANGER OPTION Hanging Women s Wear, Girls (4-16), NB/INF/TOD BLZ.H.MWJGT.01 : End Fold MAIN Label MAIN label should be located 1 down from neck edge or seam, If garment has a back patch center MAIN label on patch. Content label is sewn under bottom edge of MAIN label. CONTENT label should be sewn to under bottom edge of MAIN label (as shown). CARE label is sewn into > If using COMBINED CONTENT AND CARE label, sew label under bottom edge of MAIN label (as shown). Back Patch Hem 4 : Loop MAIN Label MAIN label should be inserted into back neck seam, under MAIN label, CARE label is sewn into label into back neck seam under MAIN label, Hem 4 OPTION 3: Heat Transfer (Tagless) Label MAIN label is adhered 1/ down from back neck edge or seam. CARE label is sewn into wearer s left side seam, 4 up from hem (as shown). Hem 4 If packaging/tags are specified attach as described below. > Hangtag: : Use a 3 swiftattachment to attach through the armhole and side seam juncture of the wearer s left side. : Use a 3 swiftattachment to attach through the inside seam allowance of the wearer s left sleeve, 1 up from sleeve hem. OPTION 3: For delicate fabrics or open knits attach using a 3 swift-attachment through backside of CARE/CONTENT label in neck. NOTE: Use a 2 swift-attacment for NB/INF/TOD. > Generic Price Ticket: Swift-attach blank side of price ticket to back side of hangtag. Hangtag must be visible when looking at front view of garment. > Generic Hangtag/Extra Button Package/Garment Feature Hangtag or Sticker: Adhere to garment as directed in product specification package or by Buyer. 4, 5 6 OPTION 3 FRONT VIEW BACK VIEW > VENDOR places on specified hanger prior to packing/shipping.hangers are specified in the product specification package or by the Buyer > Be sure to place either a size tab or mini marker on hanger as required. > Attach accessories to hanger as specified in product specification package or by the Buyer. > Hook should turn to the wearer s RIGHT when looking at the front of the garment. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. 1. Ensure all buttons, zippers, snaps and hooks are closed, unless otherwise specified in product specification manual or by the Buyer. 2. Drawcords, belts and bows should be tied as specified in the product specification package or by the Buyer. 3. Cover all embellishments with cardboard, embroideries with tissue paper and hardware with compressed foam unless otherwise specified in the product specification package or by the Buyer. 4. Fold sleeves across back of garment. 5. Fold fullness towards back, in line with shoulders. 6. Use individual polybags unless otherwise specified. 7. Place garment laying flat into carton. Do not fold. 8. Alternate individual polybags when placing into cartons. NOTE: If shipping leather outerwear, place cardboard between each polybag when placing into carton. 9. Anchor hangers to sides of cartons. 10. Use proper-sized cartons to reduce shifting during shipment. NOTE: If needed, excess packing materials may be used to reduce shifting, however excess packing materials should be kept to a minimum. NOTE: If requested in product specification package or by the Buyer product can be shipped with seeded hangers. Hangers should be placed on top of garments separated with cardboard. (As shown.) 2007 Sears Brands, LLC April 2007 Page 6

MM MM MM MM MM MM MM MM MM MM MM MM MME. MME. MME. MME. MME. MME. MME. MME. MME. MME. MME. MME. MME. MME. MME. MME. MM MM MM MM MMMM MM MMMM MM. MME. MME. MME. MME. MME. MME. MME. MME. MME. SHMC Floor Ready Guidelines BLAZERS WITH SEEDED HANGER OPTION Hanging Mens, Young Mens, Boys BLZ.H.MB.02 Attach labels as described unless otherwise specified in the product specification package or by the Buyer. > Insert Miter Fold label into back neck seam center. > Place MAIN End Fold label above wearer s left inside breast pocket. Size label is attached to bottom of MAIN label > Hangtag: Use a 1 swift-attachment to attach through the armhole and side seam juncture of the garments left side unless otherwise specified. > Generic Price Ticket: Swift-tack blank side of price ticket to back side of hangtag. Hangtag front must be completely visible when looking at front view of garment. > Sleeve Ticket: Attach to wearer s left sleeve, back side at hem unless otherwise specified. > Generic Hangtags/Extra Button Package/Garment Feature Hangtag or Sticker: Adhere to garment as directed in product specification package or by the Buyer. FRONT VIEW SLEEVE TICKET BACK VIEW > CARE label is sewn into wearer s left side seam, 4 up from hem. > VENDOR places on specified hanger prior to packing/ shipping. Hangers are specified in the product specification package or by the Buyer. > Be sure to place either a size tab or mini marker on hanger as required. > Hook should turn to the wearer s RIGHT when looking at the front of the garment. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. 1. Ensure all buttons, zippers, snaps and hooks are closed, unless otherwise specified in product specification manual or by the Buyer. 2. Drawcords, belts and bows should be tied as specified in the product specification package or by the Buyer. 3. Cover all embellishments with cardboard, embroideries with tissue paper and hardware with compressed foam unless otherwise specified in the product specification package or by the Buyer. 4. Fold sleeves across front of garment. 5. Fold fullness towards front, in line with shoulders. 6. Use individual polybags unless otherwise specified in product specification package or by the Buyer. 7. Alternate individual polybags when placing into cartons. 8. Anchor hangers to sides of cartons. 9. Use proper-sized cartons to reduce shifting during shipment. NOTE: If needed, excess packing materials may be used to reduce shifting, however excess packing materials should be kept to a minimum. 2007 Sears Brands, LLC April 2007 Page 7

TROUSERS/SHORTS Hanging, Closed Presentation (Kmart Only) Menswear, Women s Wear TRS.HC.MW.01 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. Joker Ticket Hangtag OUTSIDE FRONT VIEW INSIDE HANGER PLACEMENT FRONT VIEW HANGER PLACEMENT BACK VIEW If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: Attach over waistband on wearer s FRONT RIGHT panel unless product specification package or Buyer directs differently. > Hangtag: Use swift-attachment to attach to the wearer s RIGHT side seam of the waistband. > Generic Hangtag/Extra Button Package/Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. > VENDOR places garment on specified hanger prior to packing/shipping. Place on the hanger either a size tab or mini marker as required. Hangers are specified in the product specification package or by the Buyer. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. > Position RIGHT side (front view) of hanger inside front waistband area to hold fly folded together as shown. LEFT side of hanger holds outside of back waistband, keep waistband taut. Fly is folded inside of waistband. NOTE: All delicate fabrics (ie., corduroy, velvet, velour, leather) and belted garments require a crease-free hanger or soft-pad hanger. > Hook should turn to the wearer s back when looking at the FRONT view of the garment containing the packaging. > For larger size garments, back of garment may need to extend past hanger (front view). NOTE: Garment (front view) should never extend past right side of hanger. DO NOT fold garment sides to fit hanger. 3 4 FRONT 6 VIEW 7, 8 (Repack Only) 5, 6 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. 2. Garments front rise should be folded in. 3. Lay garment with wearer s left side facing up. 4. Fold the garment in half, bringing hems up the waistband. Shorts do not need to be folded, lay flat. 5. Pack no more than 6 pieces to one polybag. 6. Fold up to 6 garments together at knee prior to placing into cartons. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. 7. Alternate polybags of up to 6 garments (or groups of 3 individual polybags) when placing into carton to eliminate excess bulk, maximize cube. 8. Anchor hangers to sides of carton. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 5. Insert folded garment into polybag. Hanger MUST be inside of polybag. 6. Pack no more than 1 piece to each polybag. Individual polybags are required. 7. Heat seal or tape polybag closed. 8. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 8

TROUSERS, SHORTS Hanging, Closed Presentation (Sears Only) Menswear, Women s Wear TRS.HC.MW.02 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. Joker Ticket FRONT VIEW Hangtag HANGER PLACEMENT FRONT VIEW HANGER PLACEMENT BACK VIEW If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: Attach over waistband on wearer s LEFT FRONT panel unless product specification package or Buyer directs differently. > Hangtag: Use swift-attachment to attach to the wearer s LEFT side seam of the waistband. > Generic Hangtag/Extra Button Package/Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. > VENDOR places garment on specified hanger prior to packing/shipping. Place on the hanger either a size tab or mini marker as required. Hangers are specified in the product specification package or by the Buyer. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. > Fold fly inside. > Position hanger centered on waistband. NOTE: All delicate fabrics (ie., corduroy, velvet, velour, leather) and belted garments require a crease-free hanger or soft-pad hanger. > Hook should turn to the wearer s FRONT when looking at the FRONT view of the garment containing the packaging. > For larger size garments, back of garment may need to extend past left side of hanger. DO NOT fold garment sides to fit hanger. 3 4 BACK VIEW 7, 8 (Repack Only) FRONT VIEW 5, 6 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. 2. Garments FRONT rise should be folded in. 3. Lay garment with wearer s RIGHT side facing up. 4. Fold the garment in half, bringing hems up the waistband. Shorts do not need to be folded, lay flat. 5. Pack no more than 6 pieces to one polybag. 6. Fold up to 6 garments together at knee prior to placing into cartons. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. 7. Alternate polybags of up to 6 garments (or groups of 3 individual polybags) when placing into carton to eliminate excess bulk, maximize cube. 8.Anchor hangers to sides of carton. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 5. Insert folded garment into polybag. Hanger MUST be inside of polybag. 6. Pack no more than 1 piece to each polybag. Individual polybags are required. 7. Heat seal or tape polybag closed. 8. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 9

TROUSERS/SKIRTS Hanging, Open Presentation All Categories TRS.HO.ALL.03 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. Hangtag HANGER PLACEMENT FRONT VIEW HANGER PLACEMENT BACK VIEW Joker Ticket Hangtag If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: : Attach over waistband on wearer s LEFT FRONT panel unless product specification package or Buyer states differently. : Attach over waistband on wearer s LEFT BACK panel unless product specification package or Buyer states differently. > Hangtag: Use swift-attachment to attach to the wearer s LEFT side seam of the waistband. > Generic Hangtag/Extra Button Package/Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. > VENDOR places garment on specified hanger prior to packing/shipping. Place on the hanger either a size tab or mini marker as required. Hangers are specified in the product specification package or by the Buyer. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. > Hook should turn to the wearer s RIGHT when looking at the FRONT of the garment. > Position hanger centered on waistband. For larger size garments the extra fullness may need to extend beyond the hanger, equal on each side. Do not fold garment to fit hanger. NOTE: All delicate fabrics (ie., corduroy, velvet, velour, leather) and belted garments require a crease-free hanger or soft-pad hanger. 3 4 6 7, 8 (Repack Only) 5, 6 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. 2. Lay garment with wearer s FRONT side facing down. 3. Fold the garment in half, bringing hems up the waistband. Shorts do not need to be folded, lay flat. Do not fold Newborn, Infant and Toddler product prior to placing into cartons. 4. Pack no more than 6 pieces to one polybag. 5. Fold up to 6 garments together at knee prior to placing into cartons. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. 6. Alternate polybags of up to 6 garments (or groups of 3 individual polybags) when placing into carton to eliminate excess bulk, maximize cube. 7. Anchor hangers to sides of carton. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 5. Insert folded garment into polybag. Hanger MUST be inside of polybag. 6. Pack no more than 1 piece to each polybag. Individual polybags are required. 7. Heat seal or tape polybag closed. 8. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 10

BOTTOMS, JEANS, SHORTS, SWIMTRUNKS Hanging, Closed Presentation (Kmart Only) Menswear, Women s Wear BOT.HC.MW.04 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. 2, 3 4 7, 8 (Repack Only) FRONT VIEW > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. 6 BACK VIEW 5, 6 (Repack Only) Hangtag Joker Ticket OUTSIDE INSIDE HANGER PLACEMENT FRONT VIEW HANGER PLACEMENT BACK VIEW If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: Attach over waistband on wearer s FRONT RIGHT panel unless product specification package or Buyer directs differently. > Hangtag: Use swift-attachment to attach to the wearer s RIGHT side seam of the waistband. > Generic Hangtag/Extra Button Package/Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. > VENDOR places garment on specified hanger prior to packing/shipping. Place on the hanger either a size tab or mini marker as required. Hangers are specified in the product specification package or by the Buyer. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. > Position RIGHT side of hanger INSIDE FRONT waistband area to hold fly folded together as shown. LEFT side of hanger holds outside of back waistband, keep waistband taut. Fly is folded inside of waistband. NOTE: All delicate fabrics (ie., corduroy, velvet, velour, leather) and belted garments require a crease-free hanger or soft-pad hanger. > Hook should turn to the wearer s back when looking at the FRONT view of the garment containing the packaging. > For larger size garments, back of garment may need to extend past hanger. NOTE: Garment (front view) should never extend past right side of hanger. DO NOT fold garment sides to fit hanger. 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. 2. Garments front rise should be folded in. 3. Lay garment with wearer s left side facing up. 4. Fold the garment in half, bringing hems up the waistband. Shorts do not need to be folded, lay flat. 5. Pack no more than 6 pieces to one polybag. 6. Fold up to 6 garments together at knee prior to placing into cartons. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. 7. Alternate polybags of up to 6 garments (or groups of 3 individual polybags) when placing into carton to eliminate excess bulk, maximize cube. 8. Anchor hangers to sides of carton. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 5. Insert folded garment into polybag. Hanger MUST be inside of polybag. 6. Pack no more than 1 piece to each polybag. Individual polybags are required. 7. Heat seal or tape polybag closed. 8. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 11

BOTTOMS, JEANS, SHORTS, SWIMTRUNKS Hanging, Closed Presentation (Sears Only) Menswear, Women s Wear BOT.HC.MW.05 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. Joker Ticket Hangtag HANGER PLACEMENT FRONT VIEW HANGER PLACEMENT BACK VIEW If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: Attach over waistband on wearer s FRONT LEFT panel unless product specification package or Buyer directs differently. > Hangtag: Use swift-attachment to attach to the wearer s LEFT side seam of the waistband. > Generic Hangtag/Extra Button Package/Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. > VENDOR places garment on specified hanger prior to packing/shipping. Place on the hanger either a size tab or mini marker as required. Hangers are specified in the product specification package or by the Buyer. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. > Fold fly inside of waistband. > Center hanger on garment waistband, hanger hook turned to wearer s front when looking at FRONT view of garment. > Position RIGHT side of hanger OUTSIDE FRONT waistband area to hold fly folded together as shown. LEFT side of hanger holds outside of back waistband, keep waistband taut. Fly is folded inside of waistband. NOTE: All delicate fabrics (ie., corduroy, velvet, velour, leather) and belted garments require a crease-free hanger or soft-pad hanger. > Hook should turn to the LEFT when looking at the FRONT view of the garment containing the packaging. > For larger size garments, garment may need to extend past hanger (front view). DO NOT fold garment sides to fit hanger. 2, 3 4 7, 8 (Repack Only) FRONT VIEW 6 5, 6 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. 2. Garments front rise should be folded in. 3. Lay garment with wearer s RIGHT side facing up. 4. Fold the garment in half, bringing hems up the waistband. Shorts do not need to be folded, lay flat. 5. Pack no more than 6 pieces to one polybag. 6. Fold up to 6 garments together at knee prior to placing into cartons. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. 7. Alternate polybags of up to 6 garments (or groups of 3 individual polybags) when placing into carton to eliminate excess bulk, maximize cube. 8. Anchor hangers to sides of carton. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 5. Insert folded garment into polybag. Hanger MUST be inside of polybag. 6. Pack no more than 1 piece to each polybag. Individual polybags are required. 7. Heat seal or tape polybag closed. 8. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 12

BOTTOMS, JEANS, SHORTS, SWIMTRUNKS, SKIRTS, SKORTS Hanging, Open Presentation Menswear, Women s Wear, Boys (8-20), Girls (7-16), NB/INF/TOD BOT.HO.ALL.06 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. 2, 3 4 7, 8 (Repack Only) > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. 6 5, 6 (Repack Only) Joker Ticket Joker Ticket Hangtag Hangtag BACK VIEW HANGER PLACEMENT FRONT VIEW HANGER PLACEMENT BACK VIEW If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: : Attach over waistband on wearer s LEFT FRONT panel unless product specification package or Buyer states differently. : Attach over waistband on wearer s LEFT BACK panel unless product specification package or Buyer states differently. > Hangtag: Use swift-attachment to attach to the wearer s LEFT side seam of the waistband. > Generic Hangtag/Extra Button Package/Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. > VENDOR places garment on specified hanger prior to packing/shipping. Place on the hanger either a size tab or mini marker as required. Hangers are specified in the product specification package or by the Buyer. NOTE: For additional hanger information refer to the Sears Business Exchange or MyKmart web sites. > Hook should turn to the wearer s RIGHT when looking at the FRONT of the garment. > Position hanger centered on waistband. For larger size garments the extra fullness may need to extend beyond the hanger, equal on each side. Do not fold garment to fit hanger. NOTE: All delicate fabrics (ie., corduroy, velvet, velour, leather) and belted garments require a crease-free hanger or soft-pad hanger. 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. 2. Lay garment with wearer s FRONT side facing down. 3. Fold the garment in half, bringing hems up the waistband. Shorts do not need to be folded, lay flat. Do not fold Newborn, Infant and Toddler product prior to placing into cartons. 4. Pack no more than 6 pieces to one polybag. 5. Fold up to 6 garments together at knee prior to placing into cartons. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. 6. Alternate polybags of up to 6 garments (or groups of 3 individual polybags) when placing into carton to eliminate excess bulk, maximize cube. 7. Anchor hangers to sides of carton. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 5. Insert folded garment into polybag. Hanger MUST be inside of polybag. 6. Pack no more than 1 piece to each polybag. Individual polybags are required. 7. Heat seal or tape polybag closed. 8. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 13

BOTTOMS Folded, Trouser Tri- Fold Menswear, Women s Wear, Boys (8-20), Girls (7-16) BOT.FT3.MW.07 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: : Attach over waistband on wearer s Right FRONT panel. : Attach over waistband on wearer s Right BACK panel. > Size Strip: Adhere to back of wearer s RIGHT leg panel parallel to outseam. Begin strip up from fold and 1 left of wearer s RIGHT side seam. > Generic Hangtag/Extra Button Package/ Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. Joker Ticket STORE PRESENTATION WIDTH DEPTH DEPTH > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. Joker Ticket Size Strip Size Strip WIDTH FINISHED FOLD SIZES CATEGORY SEARS KMART MENS 16 W X 15 D 14 W x 15 D BIG MEN S 16 W X 15 D 19 W X 15 D MISSES 13 W X 13 D 13 W X 13 D PETITE 13 W X 13 D 13 W X 13 D JUNIORS 13 W X 13 D 13 W X 13 D WOMENS PLUS 15 W x 15 D 13 W x 16 1/ D BOYS (8-20) 13 W x 13 D 11 1/2 W x 13 D GIRLS (7-16) 13 W x 13 D 9 W x 1 D NOTE: Folded garments should not exceed Finished Fold measurements in chart unless otherwise specified. 2 3 4 8 (Repack Only) 9 10, 11 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. *Shorts do not need to be folded, lay flat. 2. Lay garment with wearer s left side facing up. 3. Bring bottom hem to bottom of pocket. 4. Bring fold to just under waistband. 5. Finished fold must equal store presentation measurements above. 6. Joker/Matchbook and size strip should be visible. 7. Pack up to 6 pieces to one polybag. 8. Alternate product prior to placing inside of polybag. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 8. Insert folded garment into polybag. 9. Pack no more than 1 piece to each polybag. Individual polybags are required. 10. Heat seal or tape polybag closed. 11. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 14

BOTTOMS Folded, Trouser Bi- Fold Boys (4-7), Girls (4-6X), NB/INF/TOD BOT.FT2.BGT.08 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: : Attach over waistband on wearer s Right FRONT panel. : Attach over waistband on wearer s Right BACK panel. > Size Strip: Adhere to back of wearer s RIGHT leg panel parallel to outseam. Begin strip up from fold and 1 left of wearer s RIGHT side seam. > Generic Hangtag/Extra Button Package/ Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. Joker Ticket STORE PRESENTATION WIDTH DEPTH Size Strip DEPTH > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. Joker Ticket Size Strip WIDTH FINISHED FOLD SIZES CATEGORY SEARS KMART BOYS (4-7) 10 W x 10 D 9 1/ W x 13 D GIRLS (4-6X) 10 W x 10 D 9 W x 1 D NOTE: Folded garments should not exceed Finished Fold measurements in chart unless otherwise specified. 3 4 8 8, 9 (Repack Only) 6, 7 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. *Shorts do not need to be folded, lay flat. 2. Lay garment with wearer s left side facing up. 3. Bring bottom hem to bottom just below waistband.. 4. Finished fold must equal store presentation measurements above. 5. Joker/Matchbook and size strip should be visible from front view. 6. Pack up to 6 pieces to one polybag. 7. Alternate product prior to placing inside of polybag. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 6. Insert folded garment into polybag. 7. Pack no more than 1 piece to each polybag. Individual polybags are required. 8. Heat seal or tape polybag closed. 9. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 15

BOTTOMS, SHORTS Folded, Jean Tri-Fold Menswear, Women s Wear, Boys (8-20), Girls (7-16) BOT.FJ3.ALL.09 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: Attach over wearer s BACK RIGHT waistband. > Pocket Flasher: Insert and attach to the wearer s RIGHT BACK pocket, centered left to right on pocket. > Size Strip: Adhere to wearer s RIGHT BACK leg panel parallel to seam. Begin strip up from fold and 1 left of wearer s RIGHT outseam. > Generic Hangtag/Extra Button Package/ Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. Joker Ticket Pocket Flasher Size Strip STORE PRESENTATION FINISHED FOLD FRONT VIEW WIDTH DEPTH FINISHED FOLD SIZES CATEGORY SEARS KMART MENS 16 W X 15 D 10 1/ W x 13 D BIG MEN S 16 W X 15 D 19 W X 15 D MISSES 13 W X 13 D 13 W X 13 D PETITE 13 W X 13 D 13 W X 13 D JUNIORS 13 W X 13 D 13 W X 13 D WOMENS PLUS 15 W x 15 D 13 W x 16 1/ D BOYS (8-20) 13 W x 13 D 11 1/2 W x 13 D GIRLS (7-16) 13 W x 13 D 9 W x 1 D NOTE: Folded garments should not exceed Finished Fold measurements in chart unless otherwise specified. 3 4 5 10, 11 (Repack Only) 7,9 8, 9 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. *Shorts do not need to be folded, lay flat. 2. Lay garment with wearer s left side facing up. 3. Bring bottom hem to bottom of pocket. 4. Bring fold to just under waistband. 5. Finished fold must equal store presentation measurements above. 6. Joker/Matchbook, pocket flasher and size strip should be visible from front view. 7. Pack no more than 6 pieces to one polybag. 8. Alternate product prior to placing inside of polybag. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 7. Insert folded garment into polybag. 8. Pack no more than 1 piece to each polybag. Individual polybags are required. 9. Heat seal or tape polybag closed. 10. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 16

BOTTOMS, SHORTS Folded, Jean Bi-Fold Boys (4-7), Girls (4-6X), NB/INF/TOD BOT.FJ2.BGT.10 - End Fold MAIN label MAIN label should be located inside center back on waistband. : Insert into back waistband seam centered below MAIN label. : Insert into wearer s LEFT front panel. OPTION 3: Insert into wearer s LEFT side seam, down from waistband. OPTION 3 - Loop MAIN label > For Garments Without a Back Opening: MAIN label should be inserted into back waist seam, : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. If packaging/tags are required attach as described in this section. > Joker/Matchbook Ticket: Attach over wearer s BACK RIGHT waistband. > Pocket Flasher: Insert and attach to the wearer s RIGHT BACK pocket, centered left to right on pocket. > Size Strip: Adhere to wearer s RIGHT BACK leg panel parallel to seam. Begin strip up from fold and 1 left of outseam. > Generic Hangtag/Extra Button Package/ Garment Feature Sticker Hangtag or Sticker: Adhere to garment as directed in specification package or by Buyer. Joker Ticket STORE PRESENTATION FINISHED FOLD FRONT VIEW DEPTH > For Garments With a Back Opening: MAIN label should be inserted into back waist seam on wearer s RIGHT of : Insert into back waistband seam under MAIN label : Insert into wearer s LEFT side seam, down from waistband. Pocket Flasher Size Strip WIDTH FINISHED FOLD SIZES CATEGORY SEARS KMART BOYS (4-7) 10 W x 10 D 9 1/ W x 13 D GIRLS (4-7) 10 W x 10 D 9 W x 1 D NOTE: Folded garments should not exceed Finished Fold measurements in chart unless otherwise specified. 8 4 7, 8 (Repack Only) 3 9, 10 (Repack Only) 1. Prior to folding, all buttons, zippers and snaps should be closed unless otherwise specified. *Shorts do not need to be folded, lay flat. 2. Lay garment with wearer s left side facing up. 3. Bring fold to just under waistband. 5. Finished fold must equal store presentation measurements above. 6. Joker/Matchbook, pocket flasher and size strip should be visible. 7. Pack no more than 6 pieces to one polybag. 8. Alternate product prior to placing inside of polybag. Individual polybags will only be used for synthetic fibers or delicate fabrics (ie., satin, velour, velvet, corduroy, leather) and garments that are highly detailed (ie., appliques/embroideries). Use individual polybags only if required. NOTE: If product is denoted as REPACK merchandise follow these guidelines. 7. Insert folded garment into polybag. 8. Pack no more than 1 piece to each polybag. Individual polybags are required. 9. Heat seal or tape polybag closed. 10. Alternate polybags when placing into carton. 2007 Sears Brands, LLC April 2007 Page 17