MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

: NEWAGE POWER CLEANER CONCENTRATE

PREPARE DATE : 09/24/2001 GENERAL INFORMATION: REVISION NO. : 0 DAP INC. : DAP-TIPS ( ) REVISION DATE: 09/24/2001

Vitamin D3 in Corn Oil

PREPARE DATE : 09/02/1997 GENERAL INFORMATION: REVISION NO. : 8 DAP INC. : DAP-TIPS ( ) REVISION DATE: 12/23/1999

TILAB Ltd. FLAKE GLASS MATERIAL SAFETY DATA SHEET

Safety Data Sheet DSC Products Inc. SDS#: 2236B Date Revised: 06/01/2015

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. 1. Identification. 2. Hazards Identification. 3. Composition/Information on Ingredients. Product Information: TV-4.

Surface Preparation or Protection

Date Printed: 5/19/2017 Product: M Surface Preparation or Protection

Woodsman Exterior Wood Cleaner

MSDS shtml?pff=y

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Date Printed: 5/18/2018 Product: M Surface Preparation or Protection

MATERIAL SAFETY DATA SHEET KRC-7 CARPET Cleaner & Stain Remover SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET SECTION 1 - PRODUCT INFORMATION SUPERPLASTICIZER SECTION 2 - HAZARD IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

Chemical Name: Cold Weld. Manufacturer: JB Weld. Container size:.28oz. Location: VLA. Disposal: Place empty container in trash.

MATERIAL SAFETY DATA SHEET

4/30/2018 Product: S773 Axiom Clean Extraction Detergent. Axiom Clean Extraction Detergent

MATERIAL SAFETY DATA SHEET

WATERBORNE DYE CONCENTRATE YELLOW QT. Surface Preparation or Protection

ACGIH TLV mg/m3. OSHA PEL mg/m3

Date Printed: 11/16/2018 Product: M E-Z FLOW BURN-IN STICK CHAMPAGNE. Surface Preparation or Protection

SAFETY DATA SHEET. Label Hazard Statement: WARNING: Harmful if swallowed. Causes eye irritation on contact. Avoid skin contact.

MATERIAL SAFETY DATA SHEET MSDS. Omni Filter Aid

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET TSE tube (150g)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET DANIEL SMITH, INC. DANIEL SMITH WATERCOLOR GROUND (ALL COLORS) Date Printed: Date Revised:

SAFETY DATA SHEET Page 1 of 5

5/22/2018 Product: B247 Axiom Clean Deodorizer

SAFETY DATA SHEET. Tip Tinner (Sn42/Bi58) MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc.

J. B. Jewitt Co., Inc. Homestead Finishing Products 1935 West 96 th Street Unit Q Cleveland OH Telephone: (216)

Z250 Z250 GREEN COLORING COMPOUND. CHEMICAL PRODUCT and COMPANY IDENTIFICATION

BREWER SCIENCE INC. MATERIAL SAFETY DATA SHEET

Bramec 6" Pump-Up Item Number 4008

NON-TRANSPORTATION. BY WEIGHT Calcium hydroxide. < 20% Silica, quartz. 5.0 mg/m 3. < 65% Magnesium hydroxide. 0.1 mg/m 3. < 10% Portland cement N.E.

MATERIAL SAFETY DATA SHEET

Integrity Composites Material Safety Data Sheet MSDS # MSDS Date: June 2012

SAFETY DATA SHEET FILE NO.: 106 SDS DATE: August 24, 2018

SAFETY DATA SHEET. SSS Re-Buff Buffing Cream

MATERIAL SAFETY DATA SHEET

Safety Data Sheet PERINEAL COLD PACKS

AST-RTV SILICONE Clear 8 oz Pressurized can SAFETY DATA SHEET Section 1- Product and Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet (OSHA 29 CFR ) Section 1 - Product and Company Identification

Safety Data Sheet 1 PRODUCT IDENTIFICATION

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Safety Data Sheet Globally Harmonized System

Material Safety Data Sheet Lead Acetate, 10% w/v. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SDS 0192

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A S H E E T

M A T E R I A L S A F E T Y D A T A

Sorbic Acid SAFETY DATA SHEET. Section 1 Identification of the substance/mixture and of the company/undertaking. Section 2 Hazards Identification

SECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

1. Chemical Product and Company Identification. 2. Composition and Information on Ingredients

SAFETY DATA SHEET. Ammonium Oxalate Solution Manufacture of other chemical products, professional, sc ientific, and technical activities. None known.

Chevron Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

RTV Clear 8 oz Pressurized can SAFETY DATA SHEET Section 1- Product and Company Identification

SAFETY DATA SHEET Liquid Car Wash Concentrate. 1. Product and Company Identification. 2. Hazards Identification

Chemical Name: WypAll. Manufacturer: Kimberly-Clark Professional. Container Size: 220 Wipes. Location: VLA. Disposal: Place empty container in trash.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Page 1 of 5

Safety Data Sheet 1 PRODUCT IDENTIFICATION

FILE NO.: DZEC04 NAME OF PRODUCT GlycoZoo Otic Cleanser DATE: 2/2/2018 INGREDIENT: CAS NO. % WT SARA 313 REPORTABLE

Safety Data Sheet Matador Oven & Grill Cleaner SECTION I - IDENTIFICATION. Matador Oven & Grill Cleaner SECTION II - HAZARDOUS IDENTIFICATION

MATERIAL SAFETY DATA SHEET MSDS

SAFETY DATA SHEET. Majestic Fresh & Clean Triple Action. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS MISCO Products Corporation

MATERIAL SAFETY DATA SHEET JAMO Waterproof Waterproofing Membrane

Material Safety Data Sheet

7561 Tyler Blvd Tyler Blvd. Unit # 6 Unit # 6 Mentor, Oh Mentor, Oh (440) (440) (440) (440)

For BALKAMP Inc. by The NOCO Company, Glenwillow, OH % by WT CAS No. Ingredient PEL PPM TLV PPM TLV MG/M3 UEL

Safety Data Sheet 1 PRODUCT IDENTIFICATION

MATERIAL SAFETY DATA SHEET. 1. Product and Company Identification. 2. Hazards Identification

MATERIAL SAFETY DATA SHEET

Safety Data Sheet POVIDONE IODINE PREP SOLUTIONS

MATERIAL SAFETY DATA SHEET

Cen-Pe-Co Worm Gear Oil with Moly Page 1 of 5 10/28/08 MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1 PRODUCT IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Transcription:

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product: TA-2 Trade Name: Manufacturer: AGS Company Common Name: Drilling/Tapping Lube Street Address: 2651 Hoyt St City/State/Zip Muskegon Hts., MI 49444 Phone: 800-253-0403 Phone: 231-733-2101 FAX: 231-733-1784 Original Issue Date: 11/7/1981 Transportation Emergency: CHEM-TEL Revision No. 6 Date 2/15/2005 Phone: 800-255-3924 SECTION 2 - COMPOSITION/ INFORMATION ON INGREDIENTS ITEM WT/WT % 1 Mineral Oil Hydrotreated (Severe) 64742-52-5 38.5 2 Paraffin 64742-51-4 38.2 3 Bees Wax 14.9 4 Tallow 61789-97-7 4.8 5 Carnauba Wax 8015-86-9 2.2 6 Napthnenic acid, zinc salt 12001-85-3 1.0 7 Polyethylene 9002-88-4 0.5 EXPOSURE LIMITS ACGIH OSHA ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING 1 5 mg/m 3 10 mg/m 3 5 mg/m 3 N.E. 2 2 mg/m 3 fume N.E. 2 mg/m 3 fume N.E. 3 4 N.E. N.E. N.E. N.E. 5 N.E. N.E. N.E. N.E. 6 7 (See Section 16 for abbreviation legend) SECTION 3 - HAZARDS IDENTIFICATION/EFFECTS OF OVEREXPOSURE EYE CONTACT: SKIN CONTACT: INHALATION: INGESTION: CHRONIC HAZARDS: Primary Route(s) of Entry May be irritating and can cause pain, tearing, reddening and swelling. Prolonged contact may result in irritation. In molten state product can cause burns. None expected. This material may be harmful if swallowed. There are no foreseeable uses of the product that would lead to chronic exposure. Skin and eye contact or ingestion. SECTION 4 - FIRST AID MEASURES EYE CONTACT: Immediately flush eyes with plenty of water. Get medical attention, if irritation persists SKIN CONTACT: Immediately flush with plenty of water. Remove clothing. Get medical attention immediately. Wash clothing separately before reuse. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. INGESTION: Get medical attention immediately. If swallowed, DO NOT induce vomiting. Give victim a glass of water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. Page 1 of 5 Printed 12/12/2005

SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: 380 o F 193 o C LOWER EXPLOSIVE LIMIT: N.D. % C.O.C. UPPER EXPLOSIVE LIMIT: N.D. % AUTOGNITION TEMPERATURE: EXTINGUISHING MEDIA: N.D. Alcohol foam, CO 2 Dry chemical, foam, water fog UNUSUAL FIRE AND EXPLOSION HAZARDS: SPECIAL FIREFIGHTING PROCEDURES: protective gear. Product can produce dense smoke from oils burning. Wear NIOSH/MSHA approved self-contained breathing apparatus and SECTION 6 - ACCIDENTAL RELEASE MEASURES RECOVERY PROCEDURES: Scrape up material and place in a chemical waste container. SECTION 7 - HANDLING AND STORAGE HANDLING: Wash thoroughly after handling STORAGE: Keep away from heat, sparks, and flame. SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION ENGINEERING CONTROLS: No special controls needed when used in supplied form. RESPIRATORY PROTECTION: For most conditions, no respiratory protection should be needed, however, if high vapor concentration should develop, use a NIOSH approved organic vapor respirator. SKIN PROTECTION: EYE PROTECTION: Where contact is likely, wear chemical resistant gloves. Wear safety glasses with side shields or goggles. OTHER PROTECTIVE EQUIPMENT: Eye wash in work area. HYGIENIC PRACTICES: Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Follow all MSDS/label precautions even after container is emptied because they may retain product residues. Avoid prolonged or repeated contact with eyes, skin, and clothing. SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES BOILING RANGE 572-575 o F 300-302 o C VAPOR DENSITY: Is heavier than air ODOR Petroleum ODOR THRESHOLD N.D. APPEARANCE Tan Wax, Solid EVAPORATION RATE Is slower than Butyl Acetate SOLUBILITY IN H 2 O Insoluble MELT POINT 162 F, ASTM D127 FREEZE POINT N.A. SPECIFIC GRAVITY 0.75 VAPOR PRESSURE N.D. ph @ 0.0% N.A. PHYSICAL STATE Solid VISCOSITY: N.A. COEFFICIENT OF WATER / OIL DISTRIBUTION: Negligible (See Section 16 for abbreviation legend) CONDITIONS TO AVOID: Sources of ignition. SECTION 10 - STABILITY AND REACTIVITY INCOMPATIBILITY: Strong acid or alkali, oxidizers and amines. HAZARDOUS DECOMPOSITION PRODUCTS Oxides of carbon and nitrogen. HAZARDOUS POLYMERIZATION: Will not occur under normal conditions STABILITY: This product is stable under normal storage conditions. Page 2 of 5 Printed 12/12/2005

Page 3 of 5 Printed 12/12/2005

SECTION 11 - TOXICOLOGICAL PROPERTIES PRODUCT LD-50 5000 mg/kg PRODUCT LC-50 No Data COMPONENT TOXICOLOGICAL INFORMATION: LD50 LC50 Mineral Oil Hydrotreated (Severe) N.D. N.D. Paraffin 5000 mg/kg/rat N.E. Microcrystalline Wax N.E N.E. Carnauba Wax N.E. N.E. Naphthenic acid, zinc salt N.E. N.E. SECTION 12 - ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: No information SECTION 13 - DISPOSAL CONSIDERATIONS DISPOSAL METHOD: Dispose of in accordance with all federal, state and local regulations. SECTION 14 - TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME Not Regulated DOT TECHNICAL NAME DOT HAZARD CLASS HAZARD SUBCLASS: DOT UN / NA NUMBER: PACKING GROUP: NA RESP. GUIDE PAGE U.S FEDERAL REGULATIONS: AS FOLLOWS - SECTION 15 - REGULATORY INFORMATION OSHA: Hazardous by definition of Hazard Communication Standard (29 cfr 1910.1200) CERCLA - SARA HAZARD CATEGORY: This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III ) and is considered, under applicable definitions, to meet the following categories: Acute Health Hazard SARA SECTION 313 This product contains the following substance subject to the reporting requirements of Section 313 of Title of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372: WT /WT % IS LESS THAN Naphthenic acid, zinc salt 12001-85-3 1 TOXIC SUBSTANCE CONTROL ACT: This product contains the following chemical substances subject to the reporting requirements of TSCA 12 (B) if exported from the United States: There are no components subject to TSCA 12(b) Page 4 of 5 Printed 12/12/2005

U.S. STATE REGULATIONS: AS FOLLOWS - NEW JERSEY RIGHT-TO-KNOW: The following materials are non-hazardous, but are among the top five components in this product: Paraffin 64742-51-4 Microcrystalline Wax 64742-42-3 Tallow 61789-97-7 Carnauba Wax 8015-86-9 PENNSYLVANIA RIGHT-TO-Know The following non-hazardous ingredients are present in the product at greater than 3%: Paraffin 64742-51-4 Microcrystalline Wax 64742-42-3 Tallow 61789-97-7 CALIFORNIA PROPOSITION 65: WARNING: The chemical(s) noted below and contained in this product, are know to the state of California to causes cancer, birth defects or other reproductive harm. No Proposition 65 chemicals exist in this product INTERNATIONAL REGULATIONS: AS FOLLOWS - CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled Product Regulations except for use of the 16 headings. CANADIAN WHMIS CLASS: No information available. SECTION 16 - OTHER INFORMATION HMIS RATINGS: Health 0 Flammability 1 Phys. Haz. 0 PPE A NFPA Health 0 Flammability 1 Reactivity 0 VOLATILE ORGANIC COMPOUNDS (VOCs): 0 lbs / gal 0 grams / liter LEGEND: N.A. Not Applicable N.E. No Established N.D. Not Determined Disclaimer: The information contained herein is base on data available. However, no warranty is expressed or implied regarding the accuracy of the data or the results obtained from the use thereof. Because the information contained herein may be applied under conditions beyond our control, we assume no responsibility for its use. Page 5 of 5 Printed 12/12/2005