1962 Clothing 11/12/08 3:31 PM Page 69 LIMITED-USE APPAREL XGuard Pro SMS XGuard 1000 XGuard 2000 XGuard Pro XGuard 1000 Protects against splash and particulates.three-layer, 60 grams. are liquidproof and full size, ideal for asbestos and lead abatement. Dust and dirt proof.white. 25/case. Breathable, 30g polypropylene with generous sizing. Protect against non-hazardous particulates. Feature sewn seams, a two-way zipper, and attached hood and boots. Blue. 25/case. 9928-L 9928-1X 9928-2X 9928-3X 9914-1X 9914-2X 9914-3X 2414B-2X 2414B-3X XGuard Pro XGuard Pro XGuard Pro XGuard Pro XGuard Pro w/ Boots XGuard Pro w/ Boots XGuard Pro w/ Boots L XL 2XL 3XL XL 2XL 3XL SMS Generous fitting and lightweight spunbonded polypropylene protect against non-hazarouds particulates. Sewn seams and a two-way zipper.white. 25/case. 3428-L 3428-XL 3428-2X 3428-3X XGuard SMS XGuard SMS XGuard SMS XGuard SMS L XL 2XL 3XL XGuard 1000 XGuard 1000 2XL 3XL XGuard 2000 Breathable, 60g spunbonded polypropylene with generous sizing fir protection against non-hazardous particulates. Feature sewn seams, a twoway zipper, and attached hood. Blue. 25/case. 6428B-XL 6428B-2X 6428B-3X XGuard 2000 XGuard 2000 XGuard 2000 XL 2XL 3XL 69
FEATURED PRODUCTS 70
LIMITED-USE APPAREL 1412 1417 1428 1414 Tyvek DuPont Tyvek is a unique nonwoven, spunbonded olefin fabric that provides comfortable protection against many hazardous dry particulates, including asbestos fibers and lead dust.tear-resistant and low-linting, with a full front zipper.white. Specify size S-XL when ordering. 25/case. 1412-1X Open Wrists/Ankles S-XL 1417-1X Elastic Wrists/Ankles S-XL 1428-1X Elastic Wrists/Ankles, Attached Hood S-XL 1414-1X Elastic Wrists, Attached Hood/Boots S-XL Note: Garments made of Tyvek should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Tyvek apparel should have slip-resistant or antislip materials on the outer surface of boots and shoe covers for use in conditions where slipping could occur. Tyvek Shirt and Pants Comfortable protection when the full coverage of coveralls isn t necessary. The roomy Shirt has a snap front closure and long sleeves. Pants have elastic at the waist for a secure fit. Specify size S-2XL when ordering. 50/case. 01201 Shirt S-2XL 50/Case 301-XL Pants S-2XL 50/Case Tyvek Apron and Sleeves Tyvek Apron provides front protection against chemicals and hazardous materials. Bib style with serged seams, neck loop and sewn ties for easy on and off.white. 100/case. Tyvek Sleeves are extremely low linting, water resistant and nonabsorbent. 18" length with elastic at both ends.white. 100 pair/case. P700-601 Apron, 28 x 36" 100/Case P700-850P Sleeve, 18" 100 Pr/Case 71
LIMITED-USE APPAREL Tyvek Standard Hood Standard hood fastens securely with a drawstring under the chin. Universal size.white. 250/case. 701-XL Standard Hood 250/Case Tyvek Pullover Hood Protect against chemicals, particulates and other hazardous materials. Pullover style has an elastic face opening and completely covers the shoulders for added protection. Universal size.white. 100/case. 713-XL Pullover Hood 100/Case 904 Tyvek Shoe and Boot Covers Provide protection for footwear in dirty environments. Easily slips on over footwear. Shoe Cover has elastic at the ankle. Boot Cover is 17" high and also features an elastic top. Optional vinyl sole provides added durability.white. 200 pair/case. 904-S/M Shoe Cover,Vinyl Sole S/M 200 Pr/Case 904-L/XL Shoe Cover,Vinyl Sole L/XL 200 Pr/Case 903-S/M Boot Cover, Elastic Top S/M 200 Pr/Case 903-L/XL Boot Cover, Elastic Top L/XL 200 Pr/Case 905-S/M Boot Cover, Elastic Top/Ankle,Vinyl Sole S/M 200 Pr/Case 905-L/XL Boot Cover, Elastic Top/Ankle,Vinyl Sole L/XL 200 Pr/Case 905 for your information 903 Tyvek Apparel features serged seams, which join material by using durable interlocking thread. 72
LIMITED-USE APPAREL KleenGuard A20 Breathable Particle Protection KleenGuard A20 provide protection against fibers, fine dusts and liquids. The strong and breathable patented MICROFORCE Barrier three-layer polypropylene is designed to keep workers cool and comfortable and is also abrasion resistant for extended wear. It offers improved barrier protection on submicron size particles (0.26 micrometers). Ideal for use in general industrial applications, manufacturing, assembly operations and food processing. Feature a zipper front, elastic back, wrists and ankles, and an attached hood.white. KleenGuard A30 Breathable Splash and Particle Protection Made from a heavier weight of the breathable MicroForce Barrier SMS fabric. The patented combination of abrasion-resistant spunbond polypropylene outer layers around a middle layer of webbed microfibers protects against submicron-sized dry particles and water-based sprays, but remains extremely breathable. Extra durability is ideal for manufacturing and assembly operation, food processing, printing, and working with fiberglass. feature a zipper front with a 1" flap and, elastic back, wrists and ankles, and an attached hood. Patented Reflex design is 7 1 2 times less likely to rip out than ANSI minimums, and it provides 12% more chest room and a 6% longer body length. 25 times more breathable with comparable particle holdout to Tyvek. NFPA 99 compliant antistatic material. White. 49112 M 24/Case 49113 L 24/Case 49114 XL 24/Case 49115 2XL 24/Case 49116 3XL 20/Case Formerly KleenGuard Select. KleenGuard A40 Liquid and Particle Protection Provide a high level of general application protection against particles and a select range of liquids. Costeffective KleenGuard A40 are breathable and lightweight, which means they can be worn for extended periods of time. Made from a microporous film laminate and a soft nonwoven fabric. Feature a zipper front, elastic back, wrists and ankles, and an attached hood. Passes NFPA 99 criteria for antistatic materials.white. 46112 M 46113 L 46114 XL 46115 2XL 46116 3XL 21/Case 46117 4XL 21/Case Formerly KleenGuard Extra. KleenGuard A60 Bloodborne Pathogen and Chemical Splash Protection Made of a three-layer fabric that offers bloodborne pathogen and chemical splash protection with breathable comfort.two tough, cloth-like outer layers are constructed of spunbond polypropylene that forms a barrier to protect against tearing and abrasion. A middle layer of microporous film repels many nonhazardous liquids and allows heat and sweat vapour to escape, keeping the worker comfortable.the fabric also provides resistance to many dry particulates. Repellency is maintained, even when pressure, such as kneeling or flexing, is applied to fabric. Zipper front has a storm flap. Features elastic back, wrists and ankles, and an attached hood. Passes ASTM F1670/1671 testing for penetration of blood, body fluids and bloodborne pathogens. Denim Blue. 44322 M 44323 L 44324 XL 44325 2XL 44326 3XL Formerly KleenGuard XP. 45022 M 24/Case 45023 L 24/Case 45024 XL 24/Case 45025 2XL 24/Case 45026 3XL 20/Case Formerly KleenGuard Ultra. 73
LIMITED-USE APPAREL MicroMAX NS Limited-Use Apparel Superior microporous protection at a very affordable cost. MicroMAX NS from Lakeland Industries employs economical, lightweight and breathable microporous technology. This line of general-purpose protective clothing can be used in any nonhazardous environment where dirt, grime, splashes and spills are present. MicroMAX NS fabric is comprised of a microporous film laminate. It is similar to standard MicroMAX, but does not include a nylon strengthening scrim. Durable protection and an affordable price. White. Apron has sewn ties and comes in sizes 28 x 36" or 28 x 44". CNS414 provide cost-effective, limited-use protection from head to toe. Serged seams offer added protection and durability. Zipper front closure. Specify size when ordering. (Oversize charge for size 3XL and larger.) Lab Coat provides economical splash and dry particulate protection. Serged seams offer added protection and durability. The front closure fastens with three snaps. The two-pocket style has sewn-on hp and breast pockets for convenient personal storage. Specify size when ordering. (Oversize charge for size 2XL and larger.) Sleeves are 18" long and have elastic ends which ensure a secure fit around the arms and wrists. 74 LAKCNS412 Open Wrists/Ankles S-2XL LAKCNS417 Elastic Wrists/Ankles S-2XL LAKCNS428 Elastic Wrists/Ankles, Attached Hood S-2XL LAKCNS414 Elastic Wrists, Attached Hood/Boots S-2XL Aprons LAKCTL601 Sewn Ties 28 x 26" 100/Case LAKCTL603 Sewn Ties 28 x 44" 100/Case Lab Coat LAKCTL140 Snap Front, No Pockets S-2XL 30/Case LAKCTL101 Snap Front,Two Pockets S-2XL 30/Case Sleeves LAKCTL850-18 Sleeves, Elastic Both Ends 18" 100 Pr/Case Shoe/Boot Covers LAKCTL904 Shoe Covers,Vinyl Sole XL 200 Pr/Case LAKCTL905 Boot Covers,Vinyl Sole XL 200 Pr/Case Shoe and Boot Covers offer limited-use foot protection and have a vinyl sole for added traction and durability. Shoe cover has an elastic top, while the Boot Cover has both an elastic top and elastic around the ankle for a secure, nonslip fit. One size available.
CHEMICAL SUITS Heat-Sealed Seam Tychem QC Polycoated DuPont Tychem QC is made from DuPont Tyvek that has been Quality Coated with 1.25-mil polyetheylene for reduced permeability to moisture, vapor and air. The material provides splash protection against many inorganic acids, bases and other liquid chemicals. Heat-sealed seams are sewn and then sealed with a heat-activated tape for increased holdout of liquids and dry particulates. Yellow. Specify size when ordering. (Oversize charge for size 2XL and larger.) 70100 70110 70120 LAK70100 Open Wrists/Ankles S-XL 6/Case LAK70110 Elastic Wrists/Ankles S-XL 6/Case LAK70115 Elastic Wrists, Attached Boots, Storm Flap S-XL 6/Case LAK70120 Open Wrists/Ankles, Attached Hood S-XL 6/Case LAK70130 Elastic Wrists/Ankles, Attached Hood S-XL 6/Case LAK70140 Open Wrists, Attached Hood/Boots S-XL 6/Case LAK70150 Elastic Wrists, Attached Hood/Boots S-XL 6/Case Note:Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Tychem garments should have slip-resistant or antislip materials on the outer surface of boots and shoe covers for use in conditions where slipping could occur. Tychem SL and Level B Suit This material is made from standard DuPont Tyvek laminated with Saranex 23-P film. This laminated material provides superior barrier protection against a broader range of hazardous liquids, toxic chemicals and minute particles than polyethylene-coated fabrics can provide. The material has zero permeability to air and moisture. 70130 70150 72110 feature storm flaps over the zippers. Heat-sealed seams are sewn and then sealed with a heat-activated tape. This method provides liquidproof seams. Also available in a fully encapsulated Level B Suit with front or rear entry. The suit has an expanded back or flat back, 20-mil PVC faceshield, elastic wrists and sock boots with splash guards. White. Specify size when ordering. (Oversize charge for size 2XL and larger.) LAK72100 Open Wrists/Ankles S-XL 6/Case LAK72110 Elastic Wrists/Ankles S-XL 6/Case LAK72115 Elastic Wrists, Attached Boots, Storm Flap S-XL 6/Case LAK72120 Open Wrists/Ankles, Attached Hood S-XL 6/Case LAK72130 Elastic Wrists/Ankles, Attached Hood S-XL 6/Case LAK72140 Open Wrists, Attached Hood/Boots S-XL 6/Case LAK72150 Elastic Wrists, Attached Hood/Boots S-XL 6/Case Encapsulated Level B Suits LAK72400 Rear Entry, Flat Back S-XL 3/Case LAK72450 Rear Entry, Expanded Back S-XL 3/Case LAK72440 Front Entry, Expanded Back S-XL 3/Case Note:Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Tychem garments should have slip-resistant or antislip materials on the outer surface of boots and shoe covers for use in conditions where slipping could occur. 72120 72150 72400 75
CHEMICAL SUITS 76 BR130 BR100 BR765 BR450 DuPont Tychem BR and Fully Encapsulated Level B Suits DuPont Tychem BR fabric provides greater than eight-hour breakthrough times for most ASTM F1001 chemicals, offering highquality chemical protection, user flexibility, abrasion resistance and exceptional freedom of movement. Seams are sewn, then heat sealed, for excellent resistance to stress and chemical penetration. Bright safety yellow color is easy to see, even in smoke or fog. feature front zipper closure with storm flap. Level B Suit has a 20-mil PVC standard view faceshield. Features include attached sock boots and outer boot flaps, elastic wrists, knee pads, one or two exhaust ports, and a 48" zipper closure protected by storm flap. Suit is available with an expanded back for an SCBA, or a flat back better suited to an airline. Specify size when ordering. (Oversize charge for sizes 2XL and larger.) LAKBR100 Open Wrists/Ankles S-XL 6/Case LAKBR110 Elastic Wrists/Ankles S-XL 6/Case LAKBR115 Elastic Wrists, Attached Boots S-XL 6/Case LAKBR120 Open Wrists/Ankles, Attached Hood S-XL 6/Case LAKBR130 Elastic Wrists/Ankles, Attached Hood S-XL 6/Case LAKBR140 Open Wrists, Attached Hood/Boots S-XL 6/Case LAKBR150 Elastic Wrists, Attached Hood/Boots S-XL 6/Case Level B Encapsulated Suits LAKBR400 Rear Entry, Flat Back S-XL LAKBR450 Rear Entry, Expanded Back S-XL LAKBR440 Front Entry, Expanded Back S-XL Sleeves LAKBR765 Sleeves, 18" 18" length 12 Pr/Cs Note:Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Tychem garments should have slip-resistant or antislip materials on the outer surface of boots and shoe covers for use in conditions where slipping could occur. DuPont Tychem TK Fully Encapsulated Level A Suits Tychem TK fabric offers outstanding protection from highly toxic, corrosive chemicals, providing greater than eight-hour holdout times for all ASTM F1001 challenge chemicals. Deluxe Level A Suit is durable enough to handle emergency response and remediation work. It has a patented two-layer faceshield (10-mil Teflon, 40-mil PVC), available in standard width or wide-view. Seams are sewn, then heat sealed on the inside and outside, for excellent resistance to stress and chemical penetration. A three-layer glove system combines Butyl, North Heat-Sealed Seams Tychem BR Sleeves Sleeves are 18" long and have elastic ends for a secure, comfortable fit. One size. Heat-Sealed Seams Silvershield and outer knit Kevlar. Other features include attached sock boots with boot flaps, an internal 1 1 2" waist belt with belt loops, elastic wrists, two exhaust valves, knee wear pads, and a double storm flap with Velcro over a gastight zipper. Standard Level A Suit has seams heat sealed on the outside only. Bright lime yellow color is easy to see, even when visibility is limited. Suit is available with an expanded back for an SCBA, or a flat back better suited to an airline. Storage bag included. Specify size when ordering. (Oversize charge for sizes 2XL and larger.) Level A Deluxe Suits LAKTK640 Front Entry, Expanded Back S-XL LAKTK640W Front Entry, Expanded Back,Wide View S-XL LAKTK650 Rear Entry, Expanded Back S-XL LAKTK650W Rear Entry, Expanded Back,Wide View S-XL Level A Standard Suits LAKTK620 Front Entry, Flat Back S-XL LAKTK660 Front Entry, Expanded Back S-XL LAKTK630 Rear Entry, Flat Back S-XL LAKTK670 Rear Entry, Expanded Back S-XL Note:Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Tychem garments should have slip-resistant or antislip materials on the outer surface of boots and shoe covers for use in conditions where slipping could occur.
CHEMICAL SUITS / FR CLOTHING ChemMAX 1 ChemMAX 2 ChemMAX 1 Combines a polyethylene barrier film and a continuous filament polypropylene nonwoven to create entry level chemical protective coveralls. Bound seams provide increased holdout of liquids and particulates. Ideal for manufacturing, environmental cleanup, or chemical handling. Zipper front with a storm flap. Specify size when ordering. Sewn and Bound Seams LAKC1B428-Y Elastic Wrists/Ankles, Attached Hood S-XL ChemMAX 2 ChemMAX 2 utilizes Saranex 23P film on two layers of a bi-component spunbond nonwoven substrate to create a high level of chemical protection. Heat sealed seams are liquidproof. Ideal for chemical mixing and handling, environmental cleanup, hazardous materials remediation and response, pharmaceutical manufacturing, painting, and general industry applications. Zipper front with a storm flap. Specify size when ordering. Heat-Sealed Seams LAKC2T130 Elastic Wrists/Ankles, Attached Hood S-XL 6/Case FR Cotton A cost-effective way to protect industrial workers from the hazards of flash fire and explosion. The tough, 9-oz material is sewn with FR thread. have a heavy-duty, two-way, quick-release brass zipper. A bi-swing pleated back offers a full range of motion, and an elasticized waist band allows for a secure fit that won t restrict movement. Adjustable sleeve cuffs accommodate gloves, and flared leg cuffs make donning easy. Includes two patch breast pockets (left pocket includes a safety flap), two hip pockets (left pocket includes a heavy-duty snap closure), two swing pockets with internal pass-throughs, and a tool pocket on the right leg. Available in chest sizes 30 to 50" (additional charge for sizes 52" and above). Navy. FR Cotton LAKCO81NVY FR Cotton, Navy 30 to 50" 77
APRONS 951925 972199 950054 950062 950003 950093 78 951922 Endurosaf Apron Made of Enduro 2000, a breakthrough high tech film that is exceptionally strong and resistant to punctures, abrasions and deterioration from oils and fats. Outperforming vinyl by 10 to 1, it also remains flexible to -65 F and will withstand heat to 180 F. The satiny-smooth surface resists a wide range of chemicals, repels liquids and is easy to clean. Apron features dielectrically sealed side ties and 1" neck straps that adjust using noncorrosive, nonabsorbent plastic buckles. FDA accepted materials. Color ANE951922 White 35 x 45" ANE951923 White 35 x 50" ANE951925 Yellow 35 x 45" ANE951926 Yellow 35 x 50" ANE951928 Blue 35 x 45" ANE951929 Blue 35 x 50" for your information Don t see what you are looking for? Do you have questions? Please call us at 800.465.3898 or check out our website at www.safetyexpress.com. Disposable Polyethylene Apron Economical protection allows you to wear once and throw away. Made of polyethylene for excellent flexibility and resistance to chemicals, oils, fats and grease. Easy to wipe down and keep clean. White. 100 per Dispenser Box ANE950126 Disp. Apron, 1 mil Economy 28 x 46" 100/Box ANE950131 Disp. Apron, 1 1 2 mil Economy 28 x 46" 100/Box 100 per Box, Individually Bagged ANE972199 Disp. Apron, 1 mil, Embossed 28 x 46" 100/Box Vinyl Apron Made of virgin vinyl that resists chemicals, oils, fats and grease. Puncture and abrasion-resistant vinyl offers excellent cost-effective protection. ANE950054 Raw Edge, 6 mil, Blue 35 x 45" Dozen ANE950062 Raw Edge, 6 mil,white 35 x 45" Dozen ANE950039 Sewn Edge, 6 mil, Blue 35 x 45" Dozen ANE950075 Die Cut, 8 mil, Blue 35 x 45" Dozen Flexible Vinyl Apron Combines flexibility with resistance to chemicals, fats, oils and grease. It is puncture and abrasion resistant and is ideal for many industrial applications. Complies with government regulations for food contact. ANE950003 Sewn Edge, 8 mil, Blue 35" x 45" Dozen ANE950010 Sewn Edge, 8 mil,white 35 x 45" Dozen ANE950017 Sewn Edge, 8 mil, Clear 35 x 45" Dozen ANE950070 Raw Edge, 12 mil, Clear 35 x 45" Dozen ANE950085 Die Cut, 6 mil, Blue 35 x 40" Dozen ANE950087 Die Cut, 6 mil, Blue 35 x 45" Dozen ANE950093 Die Cut, 6 mil,white 35 x 45" Dozen
APRONS / SLEEVES 950102 950272 950100 950328 950327 950298 950270 950278 950104 Heavy-Duty Hycar Apron Hycar is a rugged nitrile blend that provides economical protection against grease and animal fats, especially in cold conditions. This bib apron features extra-long neck and waist ties with plastic tips to prevent fraying. Comes in various weights and lengths. For weights not listed, call for details. Color 14-oz Aprons ANE950272 Yellow 35 x 45" Dozen ANE950278 Black 35 x 45" Dozen 18-oz Aprons ANE950284 Yellow 35 x 45" Dozen ANE950290 Black 35 x 45" Dozen 22-oz Aprons ANE950295 Yellow w/ Stomach Patch 35 x 45" Dozen Denim Apron and Sleeve The Shop Apron is a bib apron made of 14-oz blue denim for comfort and launderability. All aprons feature grommets and sewn tie closures. A variety of pocket configurations are available. Blue 18" Denim Sleeves are made of rugged, industrial-grade denim. Aprons ANE950322 No Pockets 28 x 36" ANE950323 Two-Compartment Bib Pocket 28 x 36" ANE950325 Bib Pocket, Side Pocket 28 x 36" ANE950327 Bib Pocket,Two Side Pockets 28 x 36" ANE950328 Bib Swing Pocket, Side Pocket 28 x 36" Sleeves ANE950248 Elastic Both Ends 18" 12 Pr/Case ANE950250 Cuff Both Ends 18" 12 Pr/Case Heavy-Duty PVC Apron This durable and comfortable Apron has a nylon backing and extra-long neck and waist ties. Excellent for light splash protection. 20-mil thickness. Available with a stomach patch for an added level of protection. Color ANE950100 Green 35 x 45" Dozen ANE950104 Green w/ Stomach Patch 35 x 45" Dozen ANE950102 White 35 x 45" Dozen ANE950106 White w/ Stomach Patch 35 x 45" Dozen Urethane Apron This lightweight, durable and comfortable Urethane Apron has a nylon backing and extra-long neck ties. Neck and waist ties feature plastic tips to prevent fraying. Recyclable. Color ANE950298 Yellow 35 x 48" Dozen ANE950300 Blue 35 x 48" Dozen Neoprene Apron and Sleeve Heavy-Duty Apron is made of double-coated neoprene and offers broad-spectrum protection from a wide range of chemicals. Features include extra-long neck and waist ties with plastic tips to prevent fraying. Recyclable. The Neoprene Sleeve provides arm protection against a wide range of chemicals, oils, acids, caustics and solvents. Aprons ANE950264 12 1 2 oz,yellow 35 x 45" Dozen ANE950266 12 1 2 oz, Black 35 x 45" Dozen ANE950268 19 oz,yellow 35 x 45" Dozen ANE950270 19 oz, Black 35 x 45" Dozen Sleeves ANE950235 Elastic Both Ends 18" Pair ANE950237 Cuffs Both Ends 18" Pair 79
1966 Clothing 11/12/08 3:48 PM Page 80 RAINWEAR / FOOTWEAR / APRON 45 Series PVC FR Rainsuit Rainsuit is constructed of lightweight, 20-mil fire retardant PVC and provides economical protection for general-use applications. Electronically sealed seams. Rainsuit consists of a jacket with a snap front and two front pockets, a detachable drawstring hood, and bib overalls with adjustable suspenders. Specify size S-XL when ordering.yellow. PVC/Polyester Rainsuit Heavy-duty PVC on polyester rainwear is ideal for everyday conditions.three-piece Rainsuit consists of a jacket with detachable hood and overalls. Specify size S-3XL when ordering.yellow. 401 501XL 3-Piece Rainsuit 48" Raincoat S-3XL S-3XL 85 Series PVC FR Rain Gear Constructed of heavyweight 35-mil fire retardant PVC-coated polyester. Provides economical protection for general-use applications. Electronically sealed seams. Rainsuit consists of a jacket with a snap front and two front pockets, a detachable drawstring hood, and bib overalls with adjustable suspenders. Specify size S-3XL when ordering.yellow. 85JPHS 85JPH2XL 85JPH3XL 85 Series Rainsuit 85 Series Rainsuit 85 Series Rainsuit S-XL 2XL 3XL 45 45 Series Rainsuit S-XL S-3XL S-3XL Xtreme FR Rain Gear High performance rain gear is made of a heavy-duty 45 mil PVC on nylon, which is flame resistant, water repellent, abrasion resistant and has good chemical hold out. Generous sizing for added comfort. Sealed seams.the 76cm (30") Jacket has an attached drawstring hood, and snap front closure with storm flap. Bib Pants include suspenders and can be worn with the Jacket to create a complete rainsuit. Specify size when ordering. Steel Midsole Economy Knee Boot A4016 A4015 Steel midsoles provide complete underfoot protection from sharp objects such as metal shavings, nails and glass. A steel safety toe offers additional foot protection. 16" Knee Boot features a cleated outsole for enhanced traction. Injection molded, seamless construction. Replaceable insoles are easy to clean. Has pull-up and kick-off lugs as well as cut off bands. Meets ASTM F2413-05 and CSA Z195-02. Specify size 6-13 when ordering. RB1-10 Steel Toe/Midsole Boot, 16" 6-13 Pair Heavy-Duty PVC Apron Provides reliable splash protection. Measures 36" x 45". P3645 80 Rain Jacket Rain Pants PVC Apron
FEATURED PRODUCTS 81