2018 Product Guide
The Glove Company - Hall of Fame 2007 - The first commercially available thin, ultra tough Black Disposable Glove in Australia and New Zealand. 2008 - The World s Toughest Disposable Glove is released in Australia and New Zealand. 2009 - The First Low Sweat disposable glove in Australia and New Zealand. 2010 - Australia and New Zealand s first Hi-Vis Orange disposable gloves. 2013 - The Glove Company approved for supply to Australian and New Zealand s Defence Forces. 2015 - World s first lightweight Chloronite Chemical glove with advanced co-polymer technology. 2016 - Major global expansion with the appointment of distribution partners in: Americas, Canada and Mexico. UK and Ireland. Germany. 2016 - KOMODO VerdaTech releases its first Hi-Vis Touch Screen compatible cut-rated material handling gloves for use with mobile devices and tablets. 2016 - Australia and New Zealand s first ultra thin, fingerless cotton glove, an inner Glovlet designed to reduce perspiration under outer gloves. 2017 - KOMODO Vigilant Gloves Hazard Management System. Linking Hazards & Tasks with Hi-Vis Colours and EN 388 Cut Ratings.
Learn About.. Glove Standards Request Product Chemical Resistance Guide The information i shown in this pictogram indicates that the gloves resistance to chemicals will be shown on a separate reference sheet. For gloves that cannot resist some chemicals for more than the required 30 minutes. The Micro-organism pictogram is to show when the glove conforms to at least a performance of less than 60 minutes (level 2) for the Penetration test. EN 374-3 Chemicals (fig 1) LETTER CHEMICAL A Methanol B Acetone C Acetonitrile D Dichloromethane E Carbon Disulfide F Toluene G Diethylamine H Tetrahydrofurane I Ethyl Acetate J n-heptane K Sodium Hydroxide 40% L Sulphuric Acid 96% Tested EN Chemicals There are more than 15,000 chemicals commonly used commercially and industrially worldwide, this is why EN 374 approved and tested chemicals are so important. These 12 chemicals are carefully tested and selected to give the best overview of a glove s chemical performance. A glove must not have a permeation breakthrough when immersed for a minimum of 30 minutes in one of the 12 chemicals (shown to the left) to be awarded the adjacent letter. For level 3 of conductive heat the glove s inside material must manage 350 C heat for 15 seconds before the material exceeds 35 C from ambient temperature of 25 C. After Burn Time Contact Heat Convective Heat 4
Abrasion Cut Tear Puncture This 1-4 digit represents how many cycles of a coarse surface the glove can handle until failure. Grade 3 gloves are commonly used for handling rough edges up to 5kg. Grade 5 gloves are commonly used for broken glass or knives. The higher this 1-4 digit the more torque (Nm) a glove can take in a tearing motion. 1 = 20Nm until break 2 = 60Nm until break 3 = 100Nm until break 4 = 150Nm until break What Are You Really Buying? Certified Independent Third Party Testing in Australia Testing is a very important area for without it you really are just guessing what is truly a quality product. Many results are often quoted but there really is only two factors that must be checked before moving ahead. Unless the results have come from an independent third party accredited test facility then you really are just taking someone s word for it. It is also best if that facility is based in a country where standards enforcement is strong. All gloves with the Independently Third Party Tested icon have been independently third party tested in Australia under AS/NZS 21.3:2005 /EN388 in conjunction with Vic Labs who have in turn been independently tested and accredited that their test results are of the highest standard. 5
The Glove that changed the Industry! The first ultra-tough, thin black disposable glove in Australia and NZ. Our unique formulation set the standard in Nitrile glove performance and is still the strongest, toughest and most chemically resistant glove material on the market. TGC Black Nitrile Disposable Gloves are enhanced with the latest low sweat technology. TGC Black Nitrile Disposable Gloves are the only black disposable glove certified for NATO and NSN codification for use by the defence force and aviation industry. The World s Toughest Disposable Gloves. NSN Codification - approved for use in the defence forces. High Puncture Resistance. Superior Chemical Resistance. Unsurpassed comfort for extended wear. Latex free, vinyl free, powder free, MBT free. Low Sweat Technology. Part No. Extra Small 160000 Small 160001 Medium 160002 Large 160003 Extra Large 160004 Box/100 gloves Case/1000 gloves (10 boxes) Colours Black 6
Light the Way! Australia and New Zealand s first Hi-Vis Orange Disposable Glove with all the ground-breaking performance of the original TGC Black Nitrile Glove, including Low Sweat Technology. The only Hi-Vis disposable approved for use by the Defence Forces and aviation industry. The number one preferred glove for aviation maintenance across Australia and NZ. The glove features a high-impact orange visual contrast surface, making it easy to detect hazardous contaminants and prevent cross contamination. The World s Toughest Disposable Gloves. NSN Codification - approved for use in the defence forces. HACCP Food Safety Certified. (International food safety certification) High Puncture Resistance. Superior Chemical Resistance. Unsurpassed comfort for extended wear. Latex free, vinyl free, powder free, MBT free. Low Sweat Technology. Part No. Extra Small 160030 Small 160031 Medium 160032 Large 160033 Extra Large 160034 Box/100 gloves Case/1000 gloves (10 boxes) Colours Hi-Vis Orange 7
& Extend your Reach. The Glove Company is Australia s and New Zealand s ONLY provider of both 400mm and 600mm nitrile gloves. Our TGC Grey Nitrile long sleeved gloves give you the technology to go where no other disposables gloves have gone before. Users now have extreme reach for fuel tanks, veterinarian services, water treatment, industrial processing or aviation services. TGC 600mm Nitrile Grey are approved for NSN codification for use by the defence forces and aviation industry. The World s Toughest Disposable Gloves. NSN codification (600mm only) - approved for use in the defence forces. HACCP Food Safety Certified. (International food safety certification) High Puncture Resistance. Textured Fingers (400mm only) Superior Chemical Resistance. Soft nitrile for comfortable conditions. Latex free, vinyl free, powder free, MBT free. 400mm Part No. Medium 162402 Large 162403 Extra Large 162404 XX Large 162405 600mm Part No. Medium 162602 Large 162603 Extra Large 162604 XX Large 162605 400mm Box/40 gloves Case/320 gloves (8 boxes) 600mm Box/12 gloves Case/288 gloves (24 boxes) Colours Grey 8
Performance & Value Working Together. The toughest, cost effective trade based black disposable gloves you will experience. Ultimate value and incredible toughness, the Black Rocket Nitrile Gloves are perfectly suited for applications across the automotive, industrial, DIY, building, coatings and mining sectors. 100% Nitrile. Available in 20 or 100 packs. Tough Durability. High Puncture Resistance. Latex free, vinyl free, powder free, MBT free. Textured fingers. Affordable High Performance Nitrile. Black Rocket Nitrile Gloves are also available in a handy 20 pack, so everyone can afford this safety solution. 20 Pack Part No. Medium 130202 Large 130203 Extra Large 130204 20 Pack Box/20 gloves Case/720 gloves (36 boxes) 100 Pack Part No. Small 130001 Medium 130002 Large 130003 Extra Large 130004 New XX Large 130005 100 Pack Box/100 gloves Case/1000 gloves (10 boxes) Colours Black 9
Enhance your Sensory capabilities with isense AS/NZS 4011:2014 accredited premium medical gloves. isense gloves are the market leading strong and durable, value-for-money medical grade disposable gloves. isense medical gloves feature a soft blue nitrile that creates a comfortable sensory experience for the user. The soft nitrile material is gentle on the skin minimising the risk of dermatitis. 100% Nitrile. Food Safe Conforms to European device directive standards. TGA registered class 1 medical device. Good chemical protection, EN374. Improved Wet Grip. Textured Fingertips. Meets EN 374/2/3. Latex free, vinyl free, powder free, MBT free Part No. Small 230001 Medium 230002 Large 230003 Extra Large 230004 Box/100 gloves Case/1000 gloves (10 boxes) Colours Blue 10
Microlite Microlite for the lightest of touches. Microlite is The Glove Company s lightest, most agile glove yet. Microlite s slender design is enhanced with soft nitrile technology that is gentle on even the most sensitive skin. Microlite has all the superior characteristics of The Glove Company s famous Nitrile blends yet Microlite is more affordable then standard irritable latex. 100% Nitrile. Very lightweight, our lightest glove. Highly affordable nitrile for less than Latex! Food safe with FDA approval & HACCP. (International food safety certification) Extremely fine dexterity. Latex free, vinyl free, powder free, MBT free 300 Pack Part No. Small 230061 Medium 230062 Large 230063 Extra Large 230064 300 Pack Box/300 gloves Case/3000 gloves (10 boxes) * XL contains 280 gloves Colours Blue 11
A premium, economical food solution. A premium, economical food solution. Vinyl Gloves for when you need super quick and affordable protection. Vinyl Premium Powdered gloves are an economical choice when high levels of durability are less of a priority. Vinyl gloves typically have a looser fit making them easier for donning and doffing when you re using for short-term tasks. Incredibly economical. A looser fit for easy donning and doffing. Great for short-term, low risk tasks. Great for food service and preparation. Best for use with nonhazardous materials. HACCP International Food Safety Certified. Latex-free The Glove Company Vinyl gloves are HACCP Food Safety Certified so you can rest assured they are safe for use with food preparation and processes. Clear Part No. Small 240911 Medium 240912 Large 240913 Extra Large 240914 Blue Part No. Small 241911 Medium 241912 Large 241913 Extra Large 241914 Box/100 gloves Case/1000 gloves (10 boxes) Colours Clear or Blue 13
Leave No Box Out of Place. The Glove Company 1, 3 and 4 tier custom spring loaded glove dispensers will keep your workplace in order. No matter the size of your glove box or the brand of glove that is in there, a TGC glove dispenser will hold every last one of them! The finish is powder coated white and even comes with 4 Stainless steel mounting screws and plugs to mount to the wall. Looks neat with a gloss white coating, stainless steel spring & TGC branded mounting plate, so you know you have TGC quality. Includes easy-to-use mounting hardware. Wall mountable for ease-of-reach. Available to hold 1 to 4 boxes. Made to fit boxes of all shapes and sizes. Spring loaded to push gloves to the front of the box, no digging around for the last few pairs. Part No. 1 Tier 390001 3 Tier 390003 4 Tier 390004 1 Tier (Holds 1 glove box) 3 Tier (Holds 3 glove boxes) 4 Tier (Holds 4 glove boxes) Colours White 14
Industrial Grade Riggers Provide the ultimate in hand protection due to their tough construction, padded palm and affordability. Part No. OSFA 910504 Pair/2 gloves Bulk/12 Pairs Genuine industrial rated rigger s gloves. Made from quality leather & heavy duty composite material. Constructed to handle the toughest situations. Double stitched. Padded palm. One size fits all Professional Riggers Crafted from premium grain A1 - Grade cow leather. Our Professional Riggers Gloves are the original extremely tough and reliable Riggers Gloves that you know and love. Crafted from High Quality Smooth Leather Tough and Reliable TWO Sizes available Double stitched. Padded palm The elastic cuff ensures your gloves fit securely. Part No. Large 910603 Extra Large 910604 Pair/2 gloves Bulk/12 Pairs Heavy Duty Industrial Nitrile The Glove Company s affordable PPE safety glove solution that will give you the confidence to handle chemicals and fuels in any industrial environment. Our heavy duty gloves have a thick nitrile coating for long-lasting shielding against harsh industrial and commercial chemicals. Part No. Large 410003 Extra Large 410004 For use with oils, fuels, solvents, chemicals. Heavy duty chemical resistance full dip nitrile coating. Applicable industries: mining, construction, and maintenance. Easy fit comfortable cotton inner. Re-usable. Abrasion and cut resistance. Good grip in both the wet and dry. Super tough and long lasting construction. Flexible nitrile dipped formula. Pair/2 gloves Bulk/12 Pairs 15
Lightweight advanced co-polymer technology. Chloronite is the new lightweight chemical glove that is exceeding industry standards. Our Chloronite chemical resistant gloves have been awarded a rare 11 letter rating under the EN 374, AS/NZS 2161.10.1 2005 standard. Unheard of! Say goodbye to big chunky chemical gloves, Now you can use an agile lightweight glove with high levels of dexterity for a vast range of hazardous chemicals. This is the result of exhaustive research and development by The Glove Company which has produced a world leading solution for chemical protection in hand safety. 16
Product Standards AS/NZS 2161.10.1:2005 / EN 374.1.2 A, B, C, D, E, G, H, I, J, K, L Level 6 pass on: Methanol Acetone Acetonitrile Dichloromethane Carbon Disulfide Diethylamine Tetrahydrofuran Ethyl Acetate N-Heptane Sodium Hydroxide Unleaded Petrol Methyl Ethyl Ketone Xylene Skydrol* Level 3 pass on: Sulphuric Acid 96% (A) (B) (C) (D) (E) (G) (H) (I) (J) (K) (L) AS/NZS 2161.3.2005/ EN 388 1101 AS/NZS 2161.2.2005/ EN 420 *Refer to chemical testing data sheet. New level of chemical protection. New proven twin material matrix. Lightweight and high dexterity. Comfortable and accelerator free. 300mm length - textured fingers. Ambidextrous. Use with Damaging solvents. Volatile fuels. All oils. Corrosive acids. Burning alkali. Hazardous chemicals. Pair Pack Part No. Small 440601 Medium 440602 Large 440603 Extra Large 440604 XX Large 440605 Bulk Pack Part No. Small 440611 Medium 440612 Large 440613 Extra Large 440614 XX Large 440615 Pair/2 gloves Bulk/24 gloves Colours Red 17
When things get heated. BlueHeat keeps you cool. BlueHeat is your best way to beat the heat. This lightweight heat tested glove is the everyday solution to temperature affected items up to 150 C. The glove is made from comfortable, cool cotton and void filled coated dipped latex to produce a super wrinkle finish that minimises the contact surface area of the glove on high temperature items. Resists 150 C - Level 3. Super wrinkle grip pattern & heat reduction. Tested to EN 407 class 2 for heat resistance. Fully washable. Lightweight & cool to wear. Re-usable Tested to EN 407 class 2 for heat resistance and level 3 for contact heat. Not suitable for welding or any open flame. Part No. Small 710401 Medium 710402 Large 710403 Extra Large 710404 XX Large 710405 Pair/2 gloves Bulk/12 Pairs Colours Blue 18
Glovlets are designed for people whose job requires them to use gloves everyday. Glovlets are a fingerless, re-usable natural cotton liner glove. Their fingerless nature allows you to maintain a strong textured grip. The Glove Company s Glovlets feature the latest moisture wicking technology to help keep your hands feeling fresh and natural. The Glove Company s Glovlets provide our users many benefits most importantly, they keep your skin fresh and can prevent dermatitis. Glovlets also act as an extra layer of hygiene protection at public gyms and sports recreation centres. Glovlets are an easy affordable solution to a serious problem A noticeably soft material that creates a highly breathable barrier between your hand and your outer glove. Washable and re-usable. Natural cotton nylon blend Any frequent glove user would know damp-donning and re-donning is a problem that our Glovlets were designed to solve. Bulk Pack Part No. Medium 681812 Large 681813 Bulk/10 pairs Colours White 19
20
Who is this KOMODO Man? KOMODO Man is The Glove Company s PPE safety protection with attitude. KOMODO Man is bold, he goes where most don t dare to go. He doesn t mind getting a little dirty and greasy. KOMODO Man s agile strength will surprise you. Most people would describe him as being courageous and tough as nails. KOMODO Man might be stubborn and mighty tough, but his loyal trustworthy nature means he will always put you first. Despite his rugged looks KOMODO Man is still a bit of a softy on the inside, he doesn t mind the occasional sunset walk. At the end of the day, KOMODO Man has always got your back. Whenever you see KOMODO Man on The Glove Company s gloves, you know you re protected by his strong, agile and durable qualities, whenever you see KOMODO Man you know that glove means business. Experience the KOMODO difference today. All KOMODO gloves have undergone Independent Third Party Testing and when we say independent we really mean it, so no in house testing. The only test results we publish are external testing that has been completed in Australia where testing compliance is extremely competent. No buts and no excuses, we couldn t imagine it being any other way! If we have made you a little more safe, a little more productive or even more comfortable, then we have done our job. So please browse the following pages of the KOMODO Man Glove range. And get ready to meet your new best bud, we hope you like him. Grant Staples Technical Director and CEO of The Glove Company Global Group (Just a guy who really loves making gloves) 21
Driving Our Best Workshops. KOMODO Man s trustworthy Mechanic s Glove. KOMODO Man is back with his new general purpose oil resistant glove specially engineered for mechanics. KOMODO Man understands the harsh elements of auto repair, he knows you are constantly dealing with grease, oil and fuel AND he knows you still require a strong dexterous grip, from threading bolts to changing brake pads. KOMODO Man s Mechanic Glove is tailored to ALL the tasks a mechanic does everyday. KOMODO Man s Mechanic s Glove is an honest all-day glove that will see you through the gears and most importantly KOMODO Man s Mechanics glove helps you get the job done, while protecting the longevity of your most valuable tool, your hands. Double dipped, unaffected by oil, fuel and even battery acid. Textured Sandy Grip perfect for use on Wet or Greasy Surfaces. Chemically Resistant Nitrile Coating Fingertip Sensitivity Luxury fabrics, Breathable comfort and easy flexible hand movement. Hand moves with the glove, no hand slip Perfect for all-day wear Extended cuff Part No. Small 630201 Medium 630202 Large 630203 Extra Large 630204 XX Large 630205 Pair/2 gloves EN388 22
Reinforced. Full-Fisted Grip! The Glove Company s KOMODO Leather Man has all our KOMODO Man s classic qualities such as agility, strength and durability, AND has the extra benefit of being crafted from the finest quality leather. Creating a fusion of both strength and softness, which is exactly what makes him our KOMODO Leather Man. Our KOMODO Leather Man offers the best of both worlds in one glove. Enhanced with the finest tactile goat skin leather, which is renowned for strength and comfort, in combination with the latest advances in fabric technology. Our KOMODO Leather Man Gloves offer the user leading edge strength, comfort and impact absorbing protection. The Glove Company s KOMODO Leather Man is suitable for a large range of tough applications. Crafted from supple goat skin leather and advanced fabrics for strength and comfort Increased grabbing, clenching, lifting, holding and carrying strength Comforting Neoprene knuckle bump & scratch protection. Low hand-clenching fatigue Part No. Small 634801 Medium 634802 Large 634803 Extra Large 634804 XX Large 634805 EN388 23
All purpose. Heavy-Duty Trade Glove. KOMODO Man s Safety Gloves represent everything KOMODO Man stands for. Our KOMODO Man s Safety Gloves are the standard tough, strong and durable work safety glove. KOMODO Man s Safety Glove Cut 1 is the perfect low cost solution for anyone who needs KOMODO Man s protection. KOMODO Man s Cut 1 Safety Glove is designed and engineered to give you maximum bang for buck! Cut 1 Rated Perfect for construction, mining, trade and home repairs. Tough Black P.U coating Chemical resistance polyurethane dipped Washable and Re-usable Colour: Blue/Black Pairs Part No. Small 620401 Medium 620402 Large 620403 Extra Large 620404 XX Large 620405 Bulk Pack Part No. Small 620411 Medium 620412 Large 620413 Extra Large 620414 XX Large 620415 Pair/2 gloves Bulk/12 pairs (Bulk packs not individually tagged) EN388 24
Multi-industry. Heavy Duty. KOMODO Man s Safety Gloves represent everything KOMODO Man stands for. Our KOMODO Man s Safety Gloves are the standard tough, strong and durable work safety glove. KOMODO Man s Cut 3 Safety Glove is a heavyduty glove that features a thick double dipped chemically resistant nitrile coating for maximum KOMODO Man strength. KOMODO Man s Cut 3 Safety Glove also features a unique non-slip sandy grip. Cut 3 Rated Textured Sandy Grip Perfect on wet and greasy surfaces Hand moves with the glove, no hand slip Washable and re-usable Moderate heat protection Chemically resistant nitrile coating Colour: Black/Yellow EN388 Part No. Small 620501 Medium 620502 Large 620503 Extra Large 620504 XX Large 620505 25
Serious Cut 5 Safety. KOMODO Man s Safety Gloves represent everything KOMODO Man stands for. Our KOMODO Man s Safety Gloves are the standard tough, strong and durable work safety glove. KOMODO Man s Cut 5 Safety Gloves offer serious cut safety protection. Made for those who need a glove built for maximum durability and safety in the harshest of abrasive, cut, tear and puncture environments. KOMODO Man s Cut 5 Safety Glove is his strongest heavy-duty safety glove that features a thick double dipped chemically resistant nitrile coating for maximum KOMODO Man strength. KOMODO Man s Safety Glove Cut 5 also features a unique non-slip sandy grip. KOMODO Man s Cut 5 Safety Glove is his most affordable Cut 5 glove which is fit for handling glass, industrial metals, serious construction and much more! Textured Sandy Grip perfect for wet or greasy surfaces Serious Cut 5 safety Fly knife cut protection Hand moves with the glove, no hand slip Washable and re-usable Moderate heat protection Chemically resistant nitrile coating Colour: Black/Red EN388 Pairs Part No. Small 620601 Medium 620602 Large 620603 Extra Large 620604 XX Large 620605 26
The very pinnacle of KOMODO performance! Vigilant Cut Resistant Gloves. Made with a blend of the world s most technical yarns in combination with a genuine safety management system. KOMODO Man s Vigilant range is colour coded with the level of risk, green for low risk, yellow for medium risk and red for high risk. This colour distinction is something that only KOMODO Man s Vigilant range has thanks to his unique fibre technology.
KOMODO Vigilant Cut 1 Premium Quality Low Risk Glove The Glove Company s KOMODO Vigilant Gloves are our most technically advanced gloves in our KOMODO range, they are our premium safety work gloves. KOMODO Vigilant Gloves are different to any other glove on the market, our safety gloves feature smart fibres that are touch screen compatible, sweat wicking and insanely comfortable, which enables your pair of KOMODO Vigilant Gloves to move with you. KOMODO Man s Vigilant Touch Screen Safety gloves, the glove you won t ever need or want to take off! Vigilant Cut 1 Hi-Vis Green Low Risk Cut 1 Rating Smart phone compatible work gloves Distinctive foam nitrile coating which creates a smooth suede like texture unlike any other glove. Features a foam nitrile coating and smart fibres, our Vigilant Cut 1 gloves are extremely lightweight and provide exquisite comfort for the users. Third-party certified and tested to Australian and New Zealand standards. AS/NZS 2161.3:2005/ EN38 Part No. Small 631201 Medium 631202 Large 631203 Extra Large 631204 XX Large 631205 EN388 2 1 2 1 28
KOMODO Vigilant Cut 3 Premium Quality Medium Risk Glove The Glove Company s KOMODO Vigilant Gloves are our most technically advanced gloves in our KOMODO range, they are our premium safety work gloves. KOMODO Vigilant Gloves are different to any other glove on the market, our safety gloves feature smart fibres that are touch screen compatible, sweat wicking and insanely comfortable, which enables your pair of KOMODO Vigilant Gloves to move with you. KOMODO Man s Vigilant Touch Screen Safety gloves, the glove you won t ever need or want to take off! Vigilant Cut 3 Hi-Vis Yellow Medium Risk Cut 3 Rating Smart phone compatible work gloves KOMODO Man s Vigilant Cut 3 Touch Screen Safety Gloves are the perfect fusion of comfort and toughness. Strong P.U coating which creates a sturdy grippy texture, that is still unbelievably lightweight and comfortable Third-party certified and tested to Australian and New Zealand standards. AS/NZS 2161.3:2005/ EN388 Part No. Small 630501 Medium 630502 Large 630503 Extra Large 630504 XX Large 630505 EN388 4 3 4 3 29
KOMODO Vigilant Cut 5 Premium Quality High Risk Glove The Glove Company s KOMODO Vigilant Gloves are our most technically advanced gloves in our KOMODO range, they are our premium safety work gloves. KOMODO Vigilant Gloves are different to any other glove on the market, our safety gloves feature smart fibres that are touch screen compatible, sweat wicking and insanely comfortable, which enables your pair of KOMODO Vigilant Gloves to move with you. KOMODO Man s Vigilant Touch Screen Safety gloves, the glove you won t ever need or want to take off! Vigilant Cut 5 Hi-Vis Red High Risk Cut 5 Rating Smart phone compatible work gloves Reinforced with our Strongest P.U Coating yet Unlike any other Cut 5 glove because they have the insane strength of a Cut 5 glove, but they also feature the KOMODO Vigilant s distinctive lightweight and comfortable characteristics. Third-party certified and tested to Australian and New Zealand standards. AS/NZS 2161.3:2005/ EN38 Part No. Small 630601 Medium 630602 Large 630603 Extra Large 630604 XX Large 630605 EN388 4 5 4 4 30
Notes
Australia sales@theglovecompany.com.au Phone: www.theglovecompany.com.au +61 (02) 4916 3000 New Zealand sales@theglovecompany.co.nz Phone: www.theglovecompany.co.nz +64 (09) 280 3332 USA sales@theglovecompany.com Phone: www.theglovecompany.com +1 (214) 329 9848