2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Lion Park Avenue Chessington Surrey KT9 1ST Contact: Daniel A Lahousse Tel: 00-1-401-719-2136 Fax: 00-1-401-231-2820 E-Mail: dlahousse@fgxi.com Website: http://www.fabrislane.com Laboratory locations: below s covered by the organisation and their relevant activities details Activity code Address Lion Park Avenue Chessington Surrey KT9 1ST Local contact Warren Mellor Tel: +44 (0) 1782 525452 E-Mail: wmellor@fgxi.com Main Office A Address 3rd floor, No. 17 Jihong Road Ouhai Economic Zone Wenzhou China Local contact Tommy Zhu Tel: +(86) 577-88877100 Email: tzhu@fgxi.com Eye and Face Protection Site activities performed away from the locations listed above: details Activity code Eyewear Factory sites Eye and Face Protection C Assessment Manager: RC3 Page 1 of 5
DETAIL OF ACCREDITATION PROTECTION CHEMICAL TESTS Eye and face protection - Sunglasses and related eyewear Construction and materials: Construction Filter Material and Surface Quality Physiological Compatibility S EN ISO 12312-1:2013 S EN ISO 12311:2013 Clause 4.2 Clause 4.3,C,C Transmittance: Transmittance and Filter Categories Uniformity of Luminous Transmittance Requirements for Road Use and Driving Additional Transmittance Requirements for Specific Filter Types: Polarising Filters Gradient Filters Claimed Transmittance Properties: lue light absorption/transmittance UV absorption/transmittance Clause 5.2 Clause 5.3.1 Clause 5.3.2 Clause 5.3.4.2 Clause 5.3.4.3 Clause 5.3.5.1 Clause 5.3.5.2 Refractive Power: Spherical Power Astigmatic Power Prism Imbalance Clause 6.1 Clause 6.2 Clause 6.3 Robustness: Frame Deformation and Retention of Filters Impact Resistance of the Filter, Strength levels 1 & 2 Increased Endurance of Sunglasses Resistance to Perspiration Clause 7.2 Clauses 7.3, 7.6 Clause 7.4 Clause 7.5 Protective Requirements: Coverage Area Clause 11.1,C Assessment Manager: RC3 Page 2 of 5
Temporal Protective Requirements Clause 11.2,C Information and Labelling Clause 12,C Sunglasses and Sunglare Filters for General Use Transmittance Optical power of oculars Material and surface quality Robustness S EN 1836:2005 +A1:2007 Requirements for complete sunglasses (frames with filters) General construction Mechanical requirements Materials for the manufacture of complete sunglasses Conditioning and test conditions for complete sunglasses Test for mechanical requirements for complete sunglasses Information and labelling Complete sunglasses Uncut finished lenses and replacement lenses (unmounted sunglass filters) Transmittance or reflectance claims Robustness claims Sunglasses and Fashion Spectacles Transmittance requirements Optical power of lenses Eye coverage and field of view Robustness and lens retention AS/NZS 1067:2003 + Amdt1:2009 Assessment Manager: RC3 Page 3 of 5
Non-prescription Sunglasses and Fashion Eyewear Refractive properties Transmittance properties Impact resistance Frame Finish Frame Corrosion Frame Deformation and Retention of Lenses ANSI Z80.3-2015 Sunglasses Spectacle Frames and Reading Glasses ridge deformation Frame Endurance Dimensional tolerances and nominal sizes S EN ISO 12870:2014 Reading Glasses Optical power of lenses S EN 14139:2010 Sunglasses, Spectacles, Reading Glasses ridge strength Rim Strength Temple strength TP63 Pull test operation TP57 Frame strength ridge strength Temple assembly strength TP61 Torque test operation Sunglasses, Spectacles, Reading Glasses and Ski Goggles Visual Inspection In house Test and Inspection Procedures: TP 42 (Sunglasses) TP 43 (Reading Glasses) TP 44 (Spectacle Frames) TP 45 (Ski Goggles),C Sunglasses, Spectacles and Reading Glasses Resistance to Perspiration In house Test Procedure TP04 Childrens sunglasses Sharp point ASTM F 963-17 part 4.7 EN 71-1 2014 Clauses 4.8, 8.12 Sharp edge ASTM F 963-17 part 4.9 EN 71-1 2014 Clauses 4.7, 8.11 Assessment Manager: RC3 Page 4 of 5
Ski Goggles Requirements for Design and Manufacture: General Requirements Materials Sit and Fit Ventilation S EN 174:2001 Clause 4.2 Clause 4.3 Clause 4.4,C,C,C,C Lens Requirements: Optical Powers Transmittance Requirements Filter material and Surface Quality Clause 5.1.2,C Mechanical Strength Clause 5.2 Suitability for Cleaning and Care Clause 5.5 Information Supplied by the Manufacturers Clause 7,C Ski Goggles General Requirements: Materials and Design ASTM F659-10,C Performance Requirements: Optical Requirements: Refractive Tolerances Astigmatic Tolerances Prismatic Power Prismatic Imbalance Ultraviolet Transmittance Optical Quality Surface & Internal Defects Clause 5.1.1 Clause 5.1.2 Clause 5.1.3 Clause 5.1.4 Clause 5.1.5 Clause 5.1.7 Clause 5.1.8,C,C Product Marking Clause 10,C END Assessment Manager: RC3 Page 5 of 5