Metal And Canvas Double Robe Assembly lnstructions - Please keep for future reference 1/8 /8 Dimensions Width - 11cm Depth - cm Height - 1cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts,call the Customer helpline: 0 00800 Issue 1-10/1/1
! Safety and Care Advice Important - Please read these instructions fully before starting assembly Check you have all the components and tools listed on page. Remove all fittings from the plastic bags and separate them into their groups. Keep children and animals away from the work area, small parts could choke if swallowed. Make sure you have enough space to layout the parts before starting Do not stand or put over weight on the parts this could cause damage. Assemble the unit as close to its final position (in the same room) as possible. Assemble on a soft level surface to avoid damaging the unit or your floor. Parts of the assembly will be easier with people. If using power tools, please follow the safety instructions supplied with the tools. We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. Warning: Before drilling,check the wall for hidden pipes and cables. Dispose of all packaging carefully and responsibly. Warning: Max loading weight Small shelf - 1 kg Large shelf - 1 kg Hanging rail - 1 kg Care and maintenance Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners. From time to time check that there are no loose screws on this unit. This product should not be discarded with household waste. take to your local authority waste disposal centre. 1
Components - Parts If you need help or have damaged or missing parts, call the Customer helpline : 0 00800 Please check you have all the parts listed below 1 Shelf x (x.cm) Shelf x (0xcm) Thin rods x (cm) Thin rods x (0cm) Thin rods x (0.8cm) Thin rods x (0.8cm) Thin rods x (cm) 8 Thin rods x (cm) Corner x8 10 Connector x 11 Shelf x (0xcm) 1 Cover x 1 1 Hook x Components - Fittings Please check you have all the parts listed below Note: The quantities below are correct amount to complete the assembly. In some cases more fittings may be supplied than required A B Screw x Wall plug (for solid walls only)x Tools required MEASURE Tape Measure
Step 1 Note:It would be useful to ask someone to help you at this stage. a: a: Attach thin rod to corner and shelf. b: Attach shelf to shelf 1 and to corner as shown in the figure. Repeat for bottom shelves. b: 1 Note: Make sure the shelf panel with yellow dot face upwards!! c: Attach thin rods to corner and shelf.attach assembled bottom shelf to thin rods as shown in the figure. c: 1
Step a: Attach thin rods to shelf. Attach thin rods to corner as shown in the figure. a: b: Insert thin rods into thin rode. Attach shelf 11 to thin rods and then attach thin rods to shelf 11 Then, repeat for other shelves. b: 11 11 11 c: Attach thin rods,, 8 to corner and connector 10 as shown in the figure. c: 8 10 8 10
Step a: Attach assembled top frame to thin rod and thin rods as shown in the figure. a: b: Insert hanging rods into hook 1. b: 1 1 c: Attach assembled hanging rod to thin rods as shown in the figure. c:
Step a: Fitting the cover 1 into the assembled frame as shown in the figure. a: 1 Note: It is recommended that two people fit the cover to the frame. b: Fasten the ties at bottom. b:
Step Fixing to wall It is recommended that the wardrobe is fixed to a wall. A B wall Note: The correct type of fixing must be used for your wall,seek professional advice if doubt. Top panel Mark the fixing hole on the wall and remove the wardrobe. Drill a hole and insert a wall plug B.! Warning: Before drilling, check the wall for hidden pipes and cables. Reposition the wardrobe and fix the wall strap using screw A. The assembly is now complete. If you need help or have damaged or missing parts,call the Customer helpline: 0 00800