SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: G96 GUN and REEL CLOTH, GUN MITT PRODUCT CODES: G96 Part Numbers: #1093, #1083 MANUFACTURER: G96 Products Inc. ADDRESS: 85 5 th Ave, Bldg #6 Paterson, NJ 07524 USA Website: Email: www.g96.com info@g96.com 973-684-4050 ph 973-684-3848 fax EMERGENCY PHONE: 3E Company 760-602-8703 PRODUCT USE: Silicone cloth puts a deep (like new luster) on all metal surfaces to repel dirt, prevent finger marks, and displace moisture. Constructed of heavy-weight flannel triple treated and fully impregnated. Cleans, polishes and protects all metal and wood surfaces. Use on guns, gun sights, fishing tackle, reels, tools, scopes, and automobile accessories. PREPARED BY: G96 Products Inc. SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS Ingredients CAS# % Wt. ACGIH-TLV-TWA NO HAZARDOUS MATERIALS SECTION 3: HAZARDS IDENTIFICATION: EMERGENCY OVERVIEW: ROUTES OF ENTRY: May irritate eyes. May irritate skin. Eyes, Skin Contact. POTENTIAL HEALTH EFFECTS EYES: Can cause irritation to eyes upon direct contact. REDNESS and/or BLURRED vision may result. SKIN: Frequent or prolonged contact can cause irritation. INGESTION: INHALATON: Not likely Not likely APPEARANCE/ODOR: TREATED COTTON CLOTH G96 PRODUCTS INC. MSDS GUN & REEL CLOTH and GUN MITT Page 1 of 5
SECTION 4: FIRST AID MEASURES EYES: If in eyes, rinse with water for 15 minutes. Remove contact lens. Protect unharmed eye. Keep eye wide open while rinsing. Be sure to flush under eye lid. If eye irritation persists, consult a specialist. SKIN: If on skin, rinse well with water. If skin irritations persist, call a physician. SECTION 5: FIRE-FIGHTING MEASURES HMIS HAZARD CLASSIFICATION HEALTH: 1 SLIGHT HAZARD FLAMMABILITY: 4 SEVERE HAZARD REACTIVITY: 0 MINIMAL HAZARD PERSONAL PROTECTION: B NFPA CODE 30B LEVEL 3 HEALTH: 1 SLIGHT HAZARD FLAMMABILITY: 4 SEVERE HAZARD REACTIVITY: 0 MINIMAL HAZARD EXTINGUISHING MEDIA: CO 2, foam, dry powder. Avoid high volume water jet. SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS Wear self-contained breathing apparatus for firefighting if necessary. Same as for solvent fires. HAZARDOUS POLYMERIZATION: Not expected to occur UNUSUAL FIRE AND EXPLOSION HAZARDS: None. ADDITIONAL INFORMATION: Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. FLASH POINT: N/A SECTION 6: ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: N/A ACCIDENTAL RELEASE MEASURES: Keep in suitable, closed containers for disposal. WASTE DISPOSAL METHOD: Dispose of all wastes in accordance with Federal, State, and Local regulations. G96 PRODUCTS INC. MSDS GUN & REEL CLOTH and GUN MITT Page 2 of 5
SECTION 7: HANDLING AND STORAGE HANDLING: Product should be handled in accordance with good industrial hygiene and safety practices. Wear gloves and goggles. STORAGE: Product should be stored in a dry place at room temperature. Keep away from flames such as a pilot light and any object that sparks such as an electric motor. Keep away from excessive heat. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION VENTILATION: Local exhaust ventilation as needed in confined areas to ensure that occupational exposure limits are not exceeded. RESPIRATORY PROTECTION: Forced air if TLV is exceeded. EYE PROTECTION: Use safety glasses, goggles, or face shield. SKIN PROTECTION: Wear protective clothing and gloves. OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Use polyethylene gloves and plastic apron. WORK HYGIENIC PRACTICES: Avoid contact with skin and eyes. Wash hands thoroughly after handling and before eating, drinking, and smoking. Keep away from food, beverages, and feed. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE: Treated cotton cloth ODOR: Characteristic perfumed oil. G96 PRODUCTS INC. MSDS GUN & REEL CLOTH and GUN MITT Page 3 of 5
SECTION 10: STABILITY AND REACTIVITY STABILITY: STABLE CONDITIONS TO AVOID (STABILITY): Keep away from flames such as a pilot light and any object that sparks such as an electric motor. Keep away from excessive heat. INCOMPATIBILITY (MATERIAL TO AVOID): Not determined. HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Not determined. HAZARDOUS POLYMERIZATION: WILL NOT OCCUR SECTION 11: TOXICOLOGICAL INFORMATION Irritancy of Material: skin / eye irritant Sensitizing capability of Material: none known SECTION 12: ECOLOGICAL INFORMATION Do NOT allow the product to enter waterways, storm drains, or soil. The liquid content of this product is toxic to aquatic species and may cause long-term adverse effects in the aquatic environment. SECTION 13: DISPOSAL CONSIDERATIONS Dispose of in accordance with local, provincial and federal regulations. SECTION 14: TRANSPORT INFORMATION NOT REGULATED G96 PRODUCTS INC. MSDS GUN & REEL CLOTH and GUN MITT Page 4 of 5
SECTION 15: REGULATORY INFORMATION SARA 313 INFORMATION:... THIS PRODUCT CONTAINS THE FOLLOWING SUBSTANCES SUBJECT TO THE REPORTING REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372:. CALIFORNIA PROPOSITION 65:... THE FOLLOWING STATEMENT IS MADE IN ORDER TO COMPLY WITH THE CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT OF 1986:.WARNING: THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER. NONE TSCA (Toxic Substances Control Act)... ALL COMPONENTS OF THIS PRODUCT ARE LISTED ON THE TSCA INVENTORY. ANY IMPURITIES PRESENT IN THIS PRODUCT ARE EXEMPT FROM LISTING. NONE SECTION 16: OTHER INFORMATION The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages. G96 PRODUCTS INC. MSDS GUN & REEL CLOTH and GUN MITT Page 5 of 5