GUARANTEED FLAME RETARDANT FOR THE LIFE OF THE GARMENT Alsico Laucuba Ltd Pittman Way, Fulwood Preston, Lancashire PR2 9ZD T - +44 (0) 1772 662500 F - +44 (0) 1772 662510 E - sales@alsico.co.uk www.alsico.co.uk Welding Essentials
WHY ALSICO? Our Phoenix range offers guaranteed Flame Retardant for the life of the garment (see page 6 for details). It has been tested up to 100 industrial processes without any deterioration in the FR performance. The Alsico Group is the largest purchaser of workwear fabrics in Europe and offers some of the most technically advanced garments in the world. Supplying over 3.5 million garments a year into the UK market. Stocked garments are ready for immediate dispatch to anywhere in the UK from our 70,000 sq.ft distribution centre located in Preston, Lancashire. Achieved Highly Commended design award for FR Garments entered into the Professional Clothing Show 2016. Ordering is made easy; you can purchase online, contact us via phone or just simply send us an email. +44 (0) 1772 662500 +44 (0) 1772 662510 sales@alsico.co.uk www.alsico.co.uk GUARANTEED FLAME RETARDANT FOR THE LIFE OF THE GARMENT 2 www.alsico.co.uk 01772 662 500 More Than Workwear 3
SCOPE OF PROTECTION CLEANING This range of garments is designed to protect the wearer against welding spatter (small splashes of molten metal), short contact time with flame and radiant heat from the arc. They also minimise the possibility of electrical shock by short term, accidental contact with live electrical conductors at voltages up to approximately 100V dc in normal conditions of wearing. The garments will protect against processes that have similar levels or risk such as cutting, grinding, arc air gouging and spraying. PRIMARY AND SECONDARY PPE Please note that during the welding operation we always recommend the use of primary PPE such as protective apron, gauntlets etc. The welding garments should be regarded as secondary protection. Use of PPE will improve the level of protection for the wearer and reduce the risk of skin burns. It will also increase the life of the garment. Welding can have a damaging effect on the surface of the garment. The purpose of all PPE is to protect the wearer against one or more safety and health hazards. The first priority is to keep the user safe and injury free. However during any hazardous operations there is always the possibility that the protective clothing will become damaged by heat, flame, sparks, splashes, etc. When a spark or hot welding splash hits the surface of the garment, the fabric immediately chars. The flame retardant treatment in the fabric prevents the char from continuing to glow or spread beyond the local area. If the hot splash hits a smooth vertical surface (e.g. wearing standing upright and no obstruction on the garment) the hot droplet may fall off and the level of damage is reduced. If it hits a horizontal surface (e.g. shoulder, arm extended) or becomes trapped (e.g. crook of arm, creases, pocket) it will remain in place and continue to char until it cools down. Although the glow will extinguish and prevent serious injury, there will be greater damage to the surface of the garment. As it cools down the char will turn brittle and eventually fall out, leaving a hole in the fabric. This can be repaired by qualified machinists using an approved fabric patch. However if this occurs repeatedly, the condition of the garment will soon deteriorate and the safety of the wearer will be compromised. It should therefore be replaced immediately. HERE ARE FOUR WAYS TO HELP REDUCE DAMAGE TO THE GARMENT Use primary PPE Select a garment with a plain front surface (no external pockets no reflective tape etc.) Ensuring the correct fit will reduce creases in the sleeves and legs Regular cleaning contamination on the surface may result in prolonged burning Fabric is suitable for industrial laundering using synthetic detergents. Soap powders and bleach should be avoided. It may also be dry cleaned without any adverse effects. The importance of regular cleaning cannot be overstated. Over many years of supplying protective clothing we have found that the majority of garments which have been damaged by flame, sparks or splashes were either: - Contaminated with a flammable substance which prolonged the burning or, - So heavily soiled that the flame retardant properties of the fabric were masked We would recommend regular cleaning by a professional laundry. Garments can be washed and dried using an approved process, and any damage would be identified and safely repaired. It is often thought that the FR treatment will wash out after repeated laundry processing. 20-30 washes is regularly quoted as the point at which a treated fabric will lose its FR performance due to washing. However this is not correct The FR treatment process ensures that a solid flame retardant polymer is physically trapped into the core of each cotton fibre. The polymer is insoluble. It cannot be removed by a conventional wash process. NB. Chlorine bleach should NOT be used as it weakens the polymer. CURRENT EUROPEAN STANDARDS EN ISO 11612:2015: Protective Clothing - Clothing to protect against heat and flame. EN ISO 11611:2015: Protective clothing for use in welding and allied processes. Class 1 for protection against less hazardous welding techniques and situations, causing lower levels of spatter and radiant heat. Class 2 for protection against more hazardous welding techniques and situations, causing higher levels or spatter and radiant heat. CLASS 1 CLASS 2 Manual welding techniques with light formation Manual welding techniques with heavy formation of spatter and drops e.g: of spatter and drops e.g: Gas welding MMA welding (with basic or cellulose covered electrode) TIG welding MAG welding (with CO2 or mix gas) MIG welding MIG welding (with high current) Micro plasma welding Self-shielded flux cored arc welding Brazing Plasma cutting Spot welding Gouging MMA welding (with rutile covered electrode) Oxygen cutting Thermal spraying Operating machines e.g: Operating machines e.g: Oxygen cutting Plasma cutting Working in confined spaces Resistance welding Overhead welding and cutting Thermal spraying Other constrained positions Bench welding 4 www.alsico.co.uk 01772 662 500 More Than Workwear 5
GUARANTEED FLAME RETARDANT FOR THE LIFE OF THE GARMENT PHOENIX BY ALSICO PHOENIX Excellent value for money Phoenix is a 100% Cotton fabric with a durable flame retardant treatment Offering a high level of wearer comfort and absorbency 340g/m 2 ensuring a good level of protection against heat and flame (EN ISO 11612) Offering a good level of protection from splashes and sparks caused by welding, grinding, gouging and similar processes (EN ISO 11611) Contains no substances which may be harmful to the wearer s skin The fabric is manufactured under the global Oeko-Text Standard 100 which is an independent testing and certification system for textiles When a flame or spark comes into contact with the surface of the fabric, it forms a charred area which helps to insulate the wearer from the heat. Within 2 seconds any flame or glow will extinguish and the charred area will turn brittle as it cools. The char will eventually fall out, leaving a hole which can be repaired by a qualified machinist using the same fabric THE FR FINISH THAT WILL NOT WASH OUT. IT HAS BEEN TESTED UP TO 100 INDUSTRIAL PROCESSES WITHOUT ANY DETERIORATION IN THE FR PERFORMANCE. JACKET MADE WITH PHOENIX Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back. Providing care instructions are followed. For further advice on laundering please contact Alsico Laucuba Ltd. MJ40 340gsm ICON GUIDE Phoenix 100% FR treated Cotton S - 3XL, Regular FLAME RETARDANT WELDING SPATTER ELECTRIC ARC INDUSTRIAL WASH Colours: Industrial Wash Colours shown are available from stock. Other colours made to order GUARANTEED FLAME RETARDANT FOR THE LIFE OF THE GARMENT 6 www.alsico.co.uk 01772 662 500 More Than Workwear 7
GUARANTEED FLAME RETARDANT FOR THE LIFE OF THE GARMENT PHOENIX BY ALSICO TROUSER MADE WITH PHOENIX COVERALL MADE WITH PHOENIX COVERALL MADE WITH PHOENIX Hook and bar fastening waist. 7 belt loops. Metal zip fly. 2 side swing pockets in self fabric. MT20 340gsm Phoenix 100% FR treated Cotton 30-46, Regular (79cm) & Tall (84cm) Colours: Industrial Wash Colours shown are available from stock. Other colours made to order stud fastening flaps. Set in sleeves. Action back. 2 side swing pockets in self-fabric, with trouser access. Rule pocket. Colours: MC20 340gsm Phoenix 100% FR treated Cotton S - 3XL, Industrial Wash Colours shown are available from stock. Other colours made to order stud fastening flaps. Set in sleeves. Action back. 2 side swing pockets in self-fabric, with trouser access. Rule pocket. FR reflective tape over shoulders, around sleeves and legs. NB. Does not comply with EN20471 MC21 340gsm Phoenix 100% FR treated Cotton S - 3XL, Industrial Wash. Special laundering conditions apply for the reflective tape. Royal Orange Colours: Colours shown are available from stock. Other colours made to order. Royal Orange 8 www.alsico.co.uk 01772 662 500 More Than Workwear 9
ZEUS FR Improved colour retention Reduced shrinkage Increased life of the garment ZEUS FR BY ALSICO COVERALL MADE WITH ZEUS FR COVERALL MADE WITH ZEUS FR COVERALL MADE WITH ZEUS FR stud fastening flaps. Set in sleeves. 2 side swing pockets with trouser access. Rule pocket. Action back. Self fabric pocket bags B630 Zeus FR 92cm - 140cm (in 4cm increments, excluding 136cm). Colours: Colours shown are available from stock. Other colours made to order. stud fastening flaps. Set in sleeves. 2 side swing pockets with trouser access. Rule pocket. Action back. Self fabric pocket bags. Two bands FR reflective tape over shoulders, around chest, sleeves and legs. NB. Does not comply with EN20471 BE30 Zeus FR 92cm - 140cm (in 4cm increments, excluding 136cm). Special laundering conditions apply for the reflective tape. Colours: Colours shown are available from stock. Other colours made to order. stud fastening flaps. Set in sleeves. 2 side swing pockets with trouser access. Rule pocket. Action back. Self fabric pocket bags. One band FR reflective tape over shoulders, sleeves and legs. NB. Does not comply with EN20471 BZ41 Zeus FR 92cm - 140cm (in 4cm increments, excluding 136cm) Industrial Wash. Special laundering conditions apply for the reflective tape. Colours: This product is made to order. Orange Red Royal Spruce Green Orange Orange 10 www.alsico.co.uk 01772 662 500 More Than Workwear 11
WELDSHIELD WELDSHIELD FR Made to order Heavyweight Class 2 Welding BY ALSICO F or the most hazardous environments FR ANTI-STATIC TROUSER MADE WITH ZEUS FR JACKET MADE WITH ZEUS FR FR ANTI-STATIC POLO SHIRT Hook and bar fastening waist. 7 belt loops. Metal zip fly. 2 side swing pockets in self fabric. Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back. Long sleeve polo shirt with button fastening neck. Double layer reinforcement at shoulders. T630 J630 EN ISO 11612:2015 A1, B1, C1 EN 1149-5: 2008 EN 1149-3: 2008 EN 61482-2: 2009 EN 61482-1-2: 2007 (Class 1 Ak4) (ATPV = 11.6 cal/cm2) Zeus FR Zeus FR 76-116cm, 92-140cm (in 4cm increments, excluding 136cm) Colours: Colours shown are available from stock. Other colours made to order Royal Spruce Green Colours: Colours shown are available from stock. Other colours made to order Royal PLS1157 220gsm 86% Cotton PROBAN 12% nylon / 2% anti-static S - XXL JACKET MADE FROM WELDSHIELD FR (CLASS 2 WELDING) TROUSER MADE FROM WELDSHIELD FR (CLASS 2 WELDING) WELDERS HOOD MADE FROM WELDSHIELD FR (CLASS 2 WELDING) Concealed stud fastening. 2 breast pockets with concealed stud fastening. Set in sleeves. Action back. Hook and bar fastening waist. 7 belt loops. Metal fly zip. 2 side swing pockets in self fabric. Double layer for added protection at neck and shoulders. EN ISO 11611:2015 Class 2 A1 EN ISO 11612:2015 A1, B1, C1, E3, F1 EN ISO 11611:2015 Class 2 A1 EN ISO 11612:2015 A1, B1, C1, E3, F1 H014 MJ41 TH04 500gsm 500gsm 500gsm 100% FR Treated Cotton 100% FR Treated Cotton 100% FR Treated Cotton One size 92-140cm, Regular 76-116cm, Colours: This product is made to order. Colours: This product is made to order. Colours: This product is made to order. Industrial Wash Colours: Colours shown are available from stock. Other colours made to order EN ISO 11611:2015 Class 2 A1 EN ISO 11612:2015 A1, B1, C1, E3, F1 Spruce Green 12 www.alsico.co.uk 01772 662 500 More Than Workwear 13
SIZE GUIDE To help you choose the appropriate size, please use the sizing and measuring guidelines shown. All sizes are approximate wearer body measurements and for guidance only based on a regular fit. Sizing and Special Measurement Forms are available upon request. MEN S TROUSER Size 30 32 34 36 38 40 42 44 46 To fit waist (cm) 77 82 87 92 97 102 107 112 117 HOW TO ORDER Ordering is easy; we make dealing with Alsico a seamless experience in terms of quality, price & service. ONLINE HOW TO ORDER ALSICO MEN S COVERALL / JACKETS Size XS S M L XL 2XL 3XL To fit chest (cm) 88 96 104 112 120 128 136 To fit chest (inch) 34 38 41 44 47 50 53 INSIDE LEG MEASUREMENTS Size Short Regular Tall Men s Trouser 29 / 74cm 31 / 79cm 33 / 84cm Visit www.alsico.co.uk to find out more PHONE Call us on 01772 662 500 EMAIL Email us at sales@alsico.co.uk Men s Coverall 27.5 / 70cm 29 / 74cm 31 / 78cm WANT TO APPLY FOR A TRADE ACCOUNT? visit www.alsico.co.uk/ alsico-trade-account Product Information: Whilst Alsico has made every effort to ensure that details and information given in this brochure are accurate at the time of publication, full technical specifications are not included and furthermore, Alsico s policy is one of continuous improvement and the right is reserved to alter details and information as the need arises. Accordingly, a Purchaser should check any details and information they wish to rely on with Alsico at the time of purchase. Alsico does not accept liability in respect of any errors or omissions herein contained or for any loss or damage, malfunction or consequential loss arising from reliance upon our brochure. Full terms and conditions are available online at: www.alsico.co.uk 14 www.alsico.co.uk 01772 662 500 More Than Workwear 15