Dow Corning 5200 Formulation Aid

Similar documents
DOWSIL 9040 Silicone Elastomer Blend

DOWSIL 2502 Cosmetic Fluid

Skin Care Imparts rich feel to skin care formulations Wash-off resistance Film barrier properties Viscosity builder for water-in-silicone systems

XIAMETER PMX-3031 Fluid

Prototype Formulations. Household Care Products

INCI Name: Cyclopentasiloxane (and) C30-45 Alkyl Cetearyl Dimethicone Crosspolymer (and) PEG/PPG-20/23 Dimethicone

INCI Name: Cyclopentasiloxane (and) Phenyl Trimethicone (and) Dimethiconol (and) C12-15 Alkyl Benzoate (and) Dimethicone Crosspolymer

Specialty Elastomers from Dow

SF SF96 Silicone Fluids

The Formulation Lab: Skin, Sun and Color A selection of products from Dow

SR1000 powder is a 100% silicone resin. It is soluble in a number of silicone and organic fluids (see solubility chart).

Silicone Solids, % Worked 25 C (77 F), cps. 15,000-30,000 Specific 25 C (77 F).95 Density, lb./gal, avg. 7.

Velvesil DM silicone is also an effective thickener for anhydrous formulations and the oil phase of emulsions.

PO Box 5411 Arlington, TX SF A-348

Chemical Name : Copolymer of diallyl dimethyl ammonium chloride& acrylamaide.

Skin Care. Silicone Ingredients For Custom Solutions. WAUKEGAN, IL

A natural, cost-efficient O/W emulsifier with excellent performance

Geogard ULTRA Multifunctional specialty additive for cosmetics and toiletries.

Jojoba Buttercreme. Description Off white solid with a creamy texture at 25 C Cream base characteristics Melting point: 55 to 70 C ph 8 to 10

Hair Care. Silicone Ingredients For Custom Solutions. WAUKEGAN, IL

Surfactant Concentrate Iselux SLC

ABIL EM 180 High performance emulsifier for all types of W/O formulations

SENSOGEL 200 PRE-NEUTRALIZED, ACRYLAMIDE-FREE THICKENER FOR A FRESH, FEATHER-LITE SENSORY

Luvigel EM. Technical Information. Thickener for the production of cosmetic products. = Registered trademark of BASF Aktiengesellschaft

Tospearl 145A. Tospearl 120A

Skin Care. Silicone Ingredients For Custom Solutions. WAUKEGAN, IL

PERSONAL CARE.

Product Information Gluconolactone and Sodium Benzoate (GSB)

Skin Care and Color Cosmetic Selection Tool

New Formulating Options with Silicone Emulsifiers

Sugar based, very efficient emulsifier for PEG-free O/W lotions and creams

TEGO Carbomer 140 G TEGO Carbomer G

Silicone Ingredients for Personal Care

Moisturizing Cream with Biopolysan 220B

Hair Care. Silicone Ingredients For Custom Solutions. WAUKEGAN, IL

II. Moisturization Improves skin moisture content General Recognized as Safe (GRAS) ingredients by FDA (21 CFR 184) No animal testing, non GMO.

MIGLYOL 840. Excellent light emollient. Alternative to IPM. INCI: Propylene Glycol Dicaprylate/Dicaprate. Excellent light and dry emollient

High performance emulsifier for all types of W/O formulations

ISOLAN GPS Emulsifier for low viscous W/O lotions

Silicones as a Color-Lock Aid in Rinse-Off Hair Care Products

The Effects of Shear on Neutralized Carbomers in Aqueous Conditions

Personal Care Ingredients. Luvitol EHO. Technical Information. = Registered trademark of BASF SE Oil component for cosmetic preparations.

The. power. of SMART. ingredients. Silicones for Personal Care

ABIL ME 45 High molecular weight silicone quat microemulsion for shampoo and conditioner applications

In 2008, a study was conducted to measure the moisturizing performance of o/w skin care emulsions with 5 wt. % varying humectant that included Zemea

Complex sensations, easy formulating. Flexibility dimensions of natural emulsifiers

Product Information Emulsifiers & Surfactants: dermofeel easymuls plus

Moisturizing Lotion with Laurest 1220 and Squalane

Aristoflex Velvet. Public. Clariant BU ICS Personal Care

PERSONAL CARE. INNOVATIVE & NATURAL Functional ingredients based on sugar chemistry

ELASTOMER RAW MATERIALS

OIL AND WATER SOLUBLE ESTERS

La OLIVE High similarity with Human Sebum

Avon Skin So Soft, Original Bath Oil Bonus-Size

BELSIL REG 1102 DIMETHICONE, DIMETHICONE/ VINYLTRIMETHYLSILOXYSILICATE CROSSPOLYMER

Performance is in our nature.

SILSOFT* Q/SILSOFT Q PMF

Functional ingredients HELIOGEL LECIGEL. The versatile gelling agents. Emulsifying properties. Easy-to-use. Sensorial gel-cream textures

Essential Elements of Rheology Control

Rheology Modifier and Thickener for Personal Care

Performance Products. EMPIGEN S18 Conditioner for Beauty and Personal Care

ISOLAN GPS. Natural emulsifier for W/O lotions with high formulation flexibility

1,3-Dimethylol-5,5-dimethylhydantoin 3-Iodo-2-propynyl butyl carbamate

Copyright All Rights Reserved

FDP and WCP TREATED PIGMENTS

TEGOSOFT OER. Evonik delivers: 1. Fully based on renewable sources 2. Emollient based on an eco-efficient process 3. Rich and caring skin feel

TABLE OF CONTENTS 1. PRODUCT OVERVIEW 3 2. MANUFACTURING PROCESS 3 3. STABILITY AND FORMULATION PROPERTIES 3 4. PRODUCT RANGE 4 5. INCI NOMENCLATURE 4

Jojoba Glaze. INCI: Simmondsia Chinensis (Jojoba) Seed Oil (and) Ethylene/Propylene/Styrene Copolymer (and) Butylene/Ethylene/Styrene Copolymer

Exoertise Innovation Technology

BELSIL EG 6000 DIMETHICONE AND DIVINYLDIMETHICONE/DIMETHICONE CROSSPOLYMER

What is BENTONE GEL IPM V? What is Isopropyl Myristate? Where can BENTONE GEL IPM V be used? What are the typical use levels?

PERSONAL CARE PRODUCT OVERVIEW

WorléeAqua Nail - The simple Way to create outstanding water-based Nail Polishes

Silsoft* A+ Technical Data Sheet. Silsoft* A+ conditioning agent

Gafquat 440, 755N, 755N-P, 755N-O and HS-100, HS-100-O polymers Cationic conditioning copolymers

Chapters 18, 22 & 30 Viscosity-inducing Agents, Ointment Bases and Ointments, Creams, Gels, and Pastes

Your Technology Our Chemistry Lawrenceville, GA Telephone: Facsimile:

What is THIXCIN R? What is seeding? What is the benefit of using THIXCIN R in combination with BENTONE GEL in my formulation?

Product Information Oil components: dermofeel sensolv

PERSONAL CARE PRODUCT BROCHURE

Powderfeel WR. One solution for multiple textures

Eastman resins for cosmetics and personal care

NORTH AMERICA SKIN CARE AND COLOR COSMETICS SELECTION GUIDE

UNLIMITED POTENTIAL: THE MIRASIL DIFFERENCE

I S E L U X. The clear solution for luxurious lather

Formulation Guidelines for Sytenol A

NIKKOL SG-CG700 Mild Cleansing Agent. Copyright (C) 2015 Nikko Chemicals (SG) Pte Ltd. All rights reserved.

TECHNICAL BULLETIN. Zemea Propanediol: A Natural Solvent for Active Ingredients

NORTH AMERICA HAIR CARE SELECTION GUIDE

What is BENTONE GEL HSO V? What are the major application benefits? Where can BENTONE GEL HSO V be used?

Product Safety Data Sheet

CREAMS BATH SOAP SUBSTITUTES OINTMENT GEL ADDITIVES. NEW 500g. pump

HIGH PERFORMANCE HAIR CARE PRODUCTS

Silsoft * E-Pearl. Emulsion. Key Features and Typical Benefits

IGI: Leadership through Wax Innovation

Supplemental January 2009

FLORAESTERS CHEMISTRY

MASSOCARE CONCENTRATES The easiest way to develop & manufacture Personal Care products

The Use of VEEGUM,VANATURAL and VAN GEL Natural Clay, and VANZAN Xanthan Gum in Personal Care and Household Wipes

Personal Care Solutions. Formulating Guidelines for EcoSmooth Delight Affordable Luxury: exceptional feel and indulgence for skin care

Transcription:

Product nformation Personal are Dow orning 5200 Formulation Aid FEATURES & BENEFTS Makes very stable W/O emulsions old manufacturing process Formulation flexibility High water content Low emulsifier use level Multiple (W/O/W) emulsions Water-in-wax emulsions o-emulsifier for O/W emulsions Moisturizing and protective Non-greasy feel Easy to spread Wash off resistance Light, hair and skin conditioning properties Wide range of emulsion form: W/O/W, water-in-wax N NAME: Lauryl PEG/PPG-18/18 Methicone APPLATONS Emulsifier designed to prepare water-in-oil emulsions with excellent stability, flexibility and aesthetic. Many uses in skin care products such as: Main emulsifier for water-in-oil creams and lotions: protective cream, cleansing lotion, night cream, sunscreen cream, baby cream, dry skin cream and lotion, moisturizing cream, foundation, hand and body cream and lotion. Allows the preparation of multiple emulsions (water/oil/water, or W/O/W) and water in wax emulsions. o-emulsifier for oil-in water creams and lotions. Skin conditioning properties in clear 2-in-1 shower gels. Delivers light hair conditioning when formulated into shampoos. t can even be used in clear shampoo formulations. TYPAL PROPERTES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow orning sales office or your Global Dow orning onnection before writing specifications on this product. Property Unit Result Physical form Liquid Viscosity range 25º (77ºF) cst 1100 2600 Flash point - closed cup º 92.5 Appearance Specific gravity 0.896 yclotetrasiloxane (D4) content % < 0.1 yclopentasiloxane (D5) content % < 0.1 lear to slightly hazy, amber liquid DESRPTON Dow orning 5200 Formulation Aid is a liquid alkylmethyl silicone polyether copolymer. ts primary function is to produce water-in-oil emulsions with a low to medium polarity oil phase. Products made with Dow orning 5200 Formulation Aid bridge the gap between oil-in-water and water-in-oil systems, delivering the benefits of protection, water resistance and elegance attributed to water-in-oil formulations but without the greasiness and heaviness of typical water-in-oil systems. Dow orning 5200 Formulation Aid enables the formulation of creams and lotions with low energy processing and at room temperature, resulting in lower energy costs and faster processing times. Dow orning 5200 Formulation Aid has a high molecular weight while still

remaining fluid. This inherent property results in the creation of a very stable visco-elastic film at the water/oil interface, therefore Dow orning 5200 Formulation Aid is a very efficient emulsifier and leads to water-in-oil formulations exhibiting excellent stability at high water concentration and low emulsifier levels. t also allows the incorporation of high levels of humectants such as glycerine and propylene glycol, while maintaining a very good sensory profile. Dow orning 5200 Formulation Aid can be used as a co-emulsifier in oilin-water systems and has also demonstrated hair and skin conditioning properties. HOW TO USE Water-in-oil emulsions The recommended use level of Dow orning 5200 Formulation Aid is 2% for an oil phase ranging from 18 to 25% for low polarity oil (e.g. Mineral oil) and from 25 to 28% for medium polarity oil (e.g. Octyl palmitate). No heating is required to produce these water-in-oil creams unless high melting point ingredients are incorporated. To ensure optimum stability of the final emulsion, the following procedures are recommended: a) Stirrer and homogenizer The water phase is added very slowly into the oil phase with high speed agitation. The final emulsion is then processed through the homogenizer. b) Turbine type equipment Turbine set to medium speed during the water addition. Turbine set to maximum speed to build the viscosity at the end. The emulsion viscosity can be increased by the addition of water, within the limits defined above or the viscosity can be decreased by increasing the oil phase volume (up to 35%) but the emulsifier level needs to be increased accordingly. c) Salts are necessary in the water phase for formulation stability. o-emulsifier for oil-in-water emulsions Dow orning 5200 Formulation Aid is an efficient co-emulsifier for oil-inwater emulsions at concentrations between 0.5 and 0.9%. Skin and hair conditioning additive Dow orning 5200 Formulation Aid can be easily incorporated into clear shampoo and shower gels in the presence of fatty acid alkanolamides such as oconut Diethanolamide or Monoisopropanolamide. FORMULATON TPS Water-in-oil emulsions t is important to regulate the speed of addition of the water phase into the oil phase so there is continuous incorporation of the water in oil. Water should not be allowed to build up on the surface during the emulsification process. t is recommended to use sodium chloride at a 1% concentration in the water phase. A co-emulsifier can be added to help to increase the formulation flexibility, for example, the incorporation of polar materials. Dow orning 5200 Formulation Aid has been designed to emulsify low to medium polarity oil phases. t is recommended to check the formulation carefully if polar materials, sunscreen actives or pigments need to be added. This is to ensure that the formulation is well within the capabilities of the emulsifier. When transferring a formulation from lab scale to industrial scale, shear rate and speed of water addition needs to be carefully monitored to ensure good results. lear shampoos and shower gels Dow orning 5200 Formulation Aid is mixed together with fatty acid alkanolamide heated to 60º (140ºF). A thickening agent is required to adjust the viscosity of the system. HANDLNG PREAUTONS PRODUT SAFETY NFORMATON REQURED FOR SAFE USE S NOT NLUDED N THS DOUMENT. BEFORE HANDLNG, READ PRODUT AND MATERAL SAFETY DATA SHEETS AND ONTANER LABELS FOR SAFE USE, PHYSAL AND HEALTH HAZARD NFORMATON. THE MATERAL SAFETY DATA SHEET S AVALABLE ON THE DOW ORNNG WEBSTE AT DOW ORNNG.OM, OR FROM YOUR DOW ORNNG SALES APPLATON ENGNEER, OR DSTRBUTOR, OR BY ALLNG DOW ORNNG USTOMER SERVE. USABLE LFE AND STORAGE Large quantities of Dow orning 5200 Formulation Aid must be stored in vented containers and should not be exposed to a ph of below 2 or above 11. Small quantities (5 kg or below) do not require such conditions. When stored at or below 25º (77ºF) in the original unopened containers, this product has a usable life of 30 months from the date of production. PAKAGNG NFORMATON This product is available in 20 kg pails and 182 kg drums. Samples are available in 250 g packs. LMTATONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses. HEALTH AND ENVRONMENTAL NFORMATON To support customers in their product safety needs, Dow orning has an extensive Product Stewardship organization and a team of Product Dow orning is a registered trademark of Dow orning orporation. We help you invent the future is a trademark of Dow orning orporation. 2013, December 27 XAMETER is a registered trademark of Dow orning orporation. 1997-2013 Dow orning orporation. All rights reserved. 2

Safety and Regulatory ompliance (PS&R) specialists available in each area. For further information, please see our website, dowcorning.com or consult your local Dow orning representative. LMTED WARRANTY NFORMATON PLEASE READ AREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow orning s sole warranty is that our products will meet the sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DOW ORNNG SPEFALLY DSLAMS ANY OTHER EXPRESS OR MPLED WARRANTY OF FTNESS FOR A PARTULAR PURPOSE OR MERHANTABLTY. DOW ORNNG DSLAMS LABLTY FOR ANY NDENTAL OR ONSEQUENTAL DAMAGES. We help you invent the future. dowcorning.com Dow orning is a registered trademark of Dow orning orporation. We help you invent the future is a trademark of Dow orning orporation. 2013, December 27 XAMETER is a registered trademark of Dow orning orporation. 1997-2013 Dow orning orporation. All rights reserved. 3

TYPAL FORMULATONS WATER-N-OL REAM: REF 2/791 ngredients Weight % Oil phase: Dow orning 5200 Formulation Aid 2.0 Light mineral oil 19.0 Sunflower oil 6.0 Water phase: Sodium hloride 1.0 Distilled Water up to 100 Preservative A. Mix the oil phase ingredients together. B. Mix the water phase ingredients together.. Slowly add B) into A) under high agitation. Homogenize. LEAR ONDTONNG SHAMPOO: REF 14/6 D ngredients Weight % Phase A: 1. Sodium Laureth Sulphate 30.0 (Albright & Wilson Empicol ESB-3) 2. Disodium Ricinoleamido MEA-Sulfosuccinate 4.0 (Rewo hemische Werke GmbH Rewoderm S1333 40) 3. ocamidopropylbetaine 4.0 (Seppic Amonyl 380BA) 4. PEG-120 Methylglucose Dioleate 1.5 (Amerchol orporation Glucamate DOE 120) 5. Distilled Water up to 100.0 6. Polyquaternium-10 0.03 (Amerchol orporation Ucare Polymer JR-125) Phase B: 7. ocamide DEA 4.0 (Henkel KGA omperlan KD) 8. Laurylmethicone opolyol 2.0 (Dow orning 5200 Formulation Aid) Phase : 9. itric Acid q.s. 10. Preservative q.s. A. Mix ingredients of phase A together and heat to 60º (140ºF). B. Heat separately phase B to 60º (140ºF).. Add phase A to B while gently mixing. ool down to room temperature and add preservative. D. Adjust ph to 6.5 with citric acid. q.s. Dow orning is a registered trademark of Dow orning orporation. We help you invent the future is a trademark of Dow orning orporation. 2013, December 27 XAMETER is a registered trademark of Dow orning orporation. 1997-2013 Dow orning orporation. All rights reserved. 4

MOSTURSNG REAM WTH 10% GLYERNE ngredients Weight % Oil phase: Dow orning 5200 Formulation Aid 2.0 Light mineral oil 10.0 Dimethicone (and) Dimethiconol 5.0 (Dow orning Dimethiconol Blend 20) Stearoxytrimethylsilane (and) Stearyl Alcohol 2.0 (Dow orning 580 Wax) yclopentasiloxane (XAMETER PMX-0245) 10.0 Water phase: Sodium hloride 1.0 Glycerine 10.0 Distilled Water up to 100 Preservative A. Mix the oil phase ingredients together. B. Mix the water phase ingredients together.. Slowly add B) into A) under high agitation. D. Homogenize. WATER-N-WAX EMULSON STK ngredients Weight % Oil Phase: Dow orning 5200 Formulation Aid 2.0 Light mineral oil 6.0 Stearyl Dimethicone (and) Octadecene (Dow orning 2503 osmetic Wax) 1.0 30-45 Alkyl Methicone (Dow orning AMS 30) 9.0 yclopentasiloxane (XAMETER PMX-0245) 8.0 Water phase: Sodium hloride 1.0 Bis-PEG-18 Methyl Ether Dimethyl Silane 3.0 (Dow orning 2501 osmetic Wax) Propylene Glycol 3.0 Distilled Water up to 100 Preservative q.s. A. Melt phase A ingredients to 75º (167ºF) using a water bath and mix it until homogeneous. B. Mix the water phase ingredients together and heat to 70º (158ºF).. Slowly add B) into A) under high agitation while keeping the temperature at 70º (158ºF). D. After complete addition of the water phase, increase the agitation speed and keep mixing for another 5 minutes. E. Pour into container while still hot. q.s. Dow orning is a registered trademark of Dow orning orporation. We help you invent the future is a trademark of Dow orning orporation. 2013, December 27 XAMETER is a registered trademark of Dow orning orporation. 1997-2013 Dow orning orporation. All rights reserved. 5

OMPATBLTY Water yclomethicone Dimethicone 5mm2/S Dimethicone 100mm2/S Dimethicone 350mm2/S Mineral oil Lanolin Glycerine Propylene Glycol Ethanol (except 1:1) sopropyl Myristate sopropyl Palmitate 12-15 Alkyl Benzoate apric/aprylic Triglycerides Sunflower oil Olive oil Wheat germ oil astor oil = ncompatible, = ompatible Figure 1: Moisturizing performance for the moisturizing cream containing 10% glycerine using corneometer Dow orning is a registered trademark of Dow orning orporation. We help you invent the future is a trademark of Dow orning orporation. 2013, December 27 XAMETER is a registered trademark of Dow orning orporation. 1997-2013 Dow orning orporation. All rights reserved. 6