A 2940 nm Micro-Fractional Laser for Signs of Aging, Photodamage & Dermal Imperfections Micro-Fractional & Whole Beam Technology Ablative Vaporization + Non-Ablative Coagulation Multiple Profitable Indications 2940 nm 1064 nm/52 nm MORE SOLUTIONS at a Micro-Fraction of the Cost... WWW.SYBARITIC.COM
TriMatrixx Provides More Features & More Value Three Popular Procedures Skin Resurfacing & Refreshening; Lunchtime Peels; Weekend & Deep Extended Peels Three Target Chromophores Water; Melanin/Pigment; Hemoglobin Three Wavelengths Multi-Platform Laser with 2940 nm (Standard), 1064 nm and 52 nm (Optional) Three Beam Profiles Micro-Fractional Beam; Focused Whole Beam; Collimated Whole Beam Three Mechanisms of Action Ablation (Vaporization); Non-Ablation (Coagulation); Cutting Three Pulse Modes Single Pulse; Multi-Pulse; Adjustable Pulse Trains + 1 Four Er:YAG Optical Lenses Micro-Fractional Lens; Focused Lens; Collimated Lens - 6 mm; Collimated Lens - 1 mm Skin Resurfacing - Medium Peel Before & After Before Treatment After Treatment The patient experienced significant improvement in skin tone and texture, acne scar reduction, pore minimization and secondary reduction of active acne. Photos courtesy of Dr. Thomas Barrows, M.D. GLOBAL AESTHETIC SOLUTIONS 1
Great Procedure Results - Lift Your Profits - Expand Your Practice Signs of Aging Photodamage Dermal Imperfections Fine Lines & Wrinkles Skin Refreshening Skin Resurfacing Scar Revision Pigmented Lesions Skin Refreshening (5-10 microns) Lightest, Mildest, Most Gentle Peel Skin Resurfacing (10-50 microns) Medium Depth Peel Deep Resurfacing (Greater than 50 microns) Deepest Peels, Most Significant Results, Longer Downtime Stratum Corneum Stratum Lucidum Stratum Granulosum Stratum Spinosum Stratum Basale Ablation Depth (microns) Depth of Ablation (based on fluence) 10 20 0 40 50 microns 60 70 80 90 100 2940 nm Wavelength (Er:YAG) Indications for Use: The 2940 nm wavelength is specifically indicated for skin resurfacing, treatment of wrinkles, fine lines and superficial skin lesions. It is used for dermatology procedures, aesthetic surgery, plastic surgery and even oral surgery for Fitzpatrick skin types I-V for the vaporization, coagulation, ablation or cutting of soft tissue, cutaneous tissue, subcutaneous tissue, striated and smooth tissue, muscle, cartilage meniscus, mucous membrane, lymph vessels and nodes, organs and glands. Sample TriMatrixx Service Menu* Laser Service Treatment Area Service Fee Downtime / Recovery Number of Treatments Package Price Range Category One Lunchtime Peel Light Peel Skin Refreshening Category Two Weekend Peel Medium Peel Skin Resurfacing Facial Décolleté Hands Facial Décolleté Hands $400-$600 $00-$500 $250-$400 $700-$900 $600-$800 $500-$800 2-4 days 5-7 days -4 days 4-6 days 7-10 days 4-6 days -6-4 -4 4-6 4-6 4-6 $1099-$2999 $799-$1899 $699-$1499 $2599-$4999 $2199-$999 $1799-$999 Category Three Extended/ Deep Peel Facial $1100-$100 6-10 days 4-6 $999-$6999 Deep Skin Resurfacing Hands $700-$900 6-8 days 6-8 $499-$5999 *Sample and example estimates only. Prices & packages and recovery time will vary. 2 www.sybaritic.com
Treat Signs of Aging Photodamage Fine Lines & Wrinkles Skin Resurfacing Expandable Multi-Platform Laser System The new TriMatrixx system is a versatile and expandable Multi-Platform laser system capable of powering multiple laser handpieces including both Erbium:YAG laser and Q-switched Nd:YAG laser handpieces. The multi-platform system allows you to upgrade and expand as you grow your practice. When you are ready to add a new service, it is as simple as adding a new module without the need to add an entire new system. The TriMatrixx system comes standard with three Er:YAG optical lenses for multiple spot sizes and Whole Beam capabilities, plus one (1) Micro-Fractional lens with an (8 x 8) micro-beam array for optimal results. Multiple Indications The new TriMatrixx performs discrete Micro-Fractional and mild to aggressive Whole Beam laser treatments for signs of aging, photodamage and dermal imperfections. Complete full-face treatments can be performed in less than twenty minutes. The optional Q-switched Nd:YAG laser enables you to effectively perform treatments for the refinement/reduction/removal of tattoos, pigmented lesions and photodamage. Aesthetic Facial Procedures: The Fastest Growing Segment of Healthcare Today The market for aesthetic medical services is exploding in popularity and growing by double digits each year. The demand for these services is at an all time high. Aesthetic laser skin refreshening, resurfacing and repair procedures have become among the most profitable of all aesthetic procedures. During the years 2009 and 2010 the number of these procedures is expected to grow by a compounded annual growth rate of 20%. The emerging market segment of physicians offering these services will be the primary benefactors servicing the unprecedented demand in this expanding device category. Signs of Aging, Photodamage, Skin Refreshening & Skin Resurfacing Procedures Can Significantly Boost Your Revenues The TriMatrixx system performs procedures to combat the visible signs of aging such as photodamge, wrinkles, fine lines and sagging skin. The procedures are extremely popular and highly profitable. The average fees charged and total expenditures by patients for these procedures make this treatment category an absolute must have for any clinic or med-spa offering aesthetics. TriMatrixx With Micro-Fractional and Whole Beam technologies patients can be treated at lower energy levels for minimal adverse effects, little downtime. Complete healing within just 2 days to 1 week. Perform aggressive treatments at higher energy levels for more dramatic results and longer healing times (up to 2 weeks). PROCEDURES National (U.S.) Average Procedure Fee $1B in Total Expenditures by U.S. Patients Fractional Lasers $1,10.00 $189.00 M Non-Invasive Tightening $1,194.00 $08.00 M Ablative Laser Skin Resurfacing $2,418.00 $189.00 M Non-Ablative Laser Skin Resurfacing $580.00 $252.00 M www.sybaritic.com
Safe & Effective Procedures Allow Choice of Minimal to Downtime TriMatrixx Micro-Fractional Photothermolysis The TriMatrixx system includes a special Micro-Fractional lens that fractionates the 2940 nm laser beam into an array of 64 exquisite microbeams each with the characteristics of the original 2940 nm Whole Beam. The 64 micro-beams are approximately 50 microns in diameter. 100 μm Height: 2μm Micro-Fractional Lens Each micro-beam produces a micro-thermal zone of both vaporized and coagulated tissue. The powerful micro-beams create a matrix of tiny wounds surrounded by islands of untreated skin a phenomenon termed "fractional photothermolysis." The untreated area helps maintain the skin s barrier function while speeding up the reepithelialization process. Whole Beam Photons Micro-Thermal Zones Micro-Fractional Lens Micro-Fractional Beam Array Skin Surface Advantages of TriMatrixx Micro-Fractional vs. Traditional Laser Resurfacing The TriMatrixx 2940 nm wavelength is scientifically recognized as nearly perfect in ablative efficiency and precision with less thermal spread as compared to much less efficient traditional and other resurfacing wavelengths that rely upon secondary non-ablative thermal coagulation as shown below. The non-2940 wavelengths cause greater collateral thermal damage, higher discomfort, longer healing time and inferior results than treatments performed with the TriMatrixx system. Comparison of TriMatrixx Micro-Fractional System & Other Fractional Technologies TECHNOLOGY/ TriMatrixx CO2 YSGG Er:Glass Nd:YAG Diode WAVELENGTH (2940 nm) (10,600 nm) (2790 nm) (1540/1550 nm) (120/1440 nm) (1450 nm) Micro-Fractional TIME (MINUTES) 10 20 40-80 20 40-80 40-80 40-80 # OF SESSIONS 1 1 1 4 4 4 ANESTHESIA No Topical No Topical + Coolant Topical + Coolant Topical + Coolant POST-TREATMENT SIDE EFFECTS Erythema Erythema + Edema Erythema Erythema + Edema Erythema + Edema Erythema + Edema DOWNTIME 2-6 days* 2-6 days 2-6 days 6-8 days 6-8 days 6-8 days (FACE) DOWNTIME 7-10 days* 7-10 days 7-10 days 10-12 days 10-12 days 10-12 days (DÉCOLLETÉ & HANDS) TIGHTENING Significant Significant Significant Marginal Marginal Marginal ABLATIVE Yes Yes Yes No No No COAGULATION Yes Yes Yes Yes Yes Yes DISCOMFORT Low to to High Low to to High to High to High PEEL Yes/Double Single/Excretion Yes/Double No/Excretion No/Excretion No/Excretion * Downtime estimates based on light & medium peel (Category One -Two) 4
Micro-Fractionating A New & Popular Aesthetic Opportunity Water is the TriMatrixx Target Chromophore The target chromophore for the Er:YAG 2940 nm wavelength is water in the skin. The 2940 nm corresponds to the 000 nm absorption peak of water (See graphic of absorption shown) and provides the ability to control the exact depth of penetration. The precise ablative and non-ablative results of the 2940 nm wavelength make the TriMatrixx system three () times more efficient than the 10,600 nm wavelength of the CO2 laser. The high ablation efficiency of the TriMatrixx wavelength provides a precise Photonic Vaporization Peel (PVP) with significantly less secondary thermal spread than the CO2 laser. Pulse Mode Versatility: Practitioners Can Easily Use the Wide Range of Features & Parameters for Repeatable & Customized Results The TriMatrixx system uniquely allows the operator to select pulse modes and pulse durations, by choosing either the SINGLE PULSE MODE or the MULTI-PULSE MODE for greater versatility. The Single Pulse Mode provides a short pulse duration of 250 microseconds (μs) for highly ablative treatments. By selecting the Multi-Pulse Mode the operator can choose a sequence of consecutive pulses, ranging from two to four mini-pulses (500 μs, 750 μs, 1000 μs) for less ablative treatments. Each mini-pulse has a duration of 250 μs, and is used 250 millisecond (msec) delay period between each mini-pulse to create a pulse train that complements the thermal relaxation time of the surrounding tissue. Water absorption coefficient: 2940 nm = TriMatrixx is16 times greater than CO2 laser High water absorption = less thermal damage. Er:YAG 2940 nm CO2 Laser 10,600 mn Energy Fluence The tissue ablation penetration depth is determined by the amount of energy fluence delivered to the tissue. The TriMatrixx achieves minimal to moderately aggressive tissue ablation by coordinating the energy level selected (250 mj to 1 Joule) with pulse duration and pulse mode, treatment spot size and choice from four (4) different optical lenses. Pulse Duration The TriMatrixx system allows you to select pulse durations ranging from 250 to 1000 μs. Versatile pulse duration settings enable you to emphasize either coagulation or ablation for any particular treatment, or choose a blend of each depending on the desired outcome. Pulse Trains (2, or 4 PIPs) delivered with a short delay period cause the tissue to treat the pulse train as a single pulse of a longer duration. Long pulse trains delivered with a longer delay period allow sufficient thermal relaxation time to achieve pulse stacking that achieves different penetration depths while regulating the amounts of both ablation and non-ablative coagulation with each pass for desired treatment objectives. 5
Exceptional & Rapid Return on Investment Focused and Collimated Whole Beam Lenses Soft Ablation, Precise Control & Predictable Penetration Depths Treatments with the Whole Beam lenses (focused & collimated) gently ablate the outer layers of the epidermis to freshen and smooth the appearance of the skin with a choice of downtime based on the preferences of each patient. The predictability of the system enables practitioners to emphasize pure ablation, pure coagulation or a blend of the benefits of each depending on the desired outcome. The Trimatrixx system treats a number of indications and offers a range of remarkable laser peels ranging from the most superficial to deep and aggressive based on the severity of the skin condition and the preferences of your patients. Quick Treatments with Minimal Recovery Time TriMatrixx treatments are quick and easy to perform because of the available large spot sizes (up to 10 mm) and high repetition rates (up to 9 Hz). The flat top hat beam profile provides an even distribution of photon energy to the treatment site, resulting in faster re-epithelialization and short-term post-treatment erythema. The recovery period can be as short as one or two days based on individual preferences. Unique Double Peel Ablative & Non-Ablative Benefits Depending on the energy fluence selected, both precise ablative removal of the outer layers of the epidermis and underlying non-ablative coagulation can be easily accomplished. Patients can experience both an immediate peel of varying depths called the Photonic Vaporization Peel (PVP) resulting from vaporization of the most superficial skin layers, and a secondary peel several days later called the Thermal Coagulation Peel (TCP) due to the non-ablative coagulation of tissue beyond the ablation zone as shown in the accompanying illustration. This unique double peel results in twice the treatment results with minimal patient downtime. Er:YAG 2940 nm Ablation Zone *(10-40 microns/per pass) Non-Ablative/Thermal Coagulation Zone (5-0 microns/per pass) TriMatrixx Q1064 Q-switched Nd:YAG Laser Handpiece (Optional) Treat more indications, expand your service offerings and increase your revenues with the optional new TriMatrixx Q1064 Q-switched Nd:YAG laser handpiece. Both the 1064 and 52 nm wavelengths are provided for quick and easy Plug-n-Treat attachment for the TriMatrixx multi-platform. By adding the TriMatrixx Q1064 handpiece to your multi-platform system, you will be able to treat dark and red tattoos as well as pigmented lesions. In addition, you can perform non-ablative treatments for photodamage and perform rejuvenating carbon powder peels. The 1064 wavelenth stimulates collagen by heating the papillary dermis, and the use of carbon powder reduces pore sizes and exfoliates the outer skin layers. The standard fees charged for these aesthetic services make it one of the highest revenue per hour generators in the aesthetics field due to the short time required TriMatrixx Q1064 Q-Switched Nd:YAG Handpiece for most treatments. 1064 nm/52 nm GLOBAL AESTHETIC SOLUTIONS 6
New TriMatrixx Features The most valuable and versatile micro-fractional laser in the marketplace Includes tri-optical lens system (focused, collimated and micro-fractional) Choose soft ablation with minimal recovery time or more aggressive treatments Single, multi-pulse, adjustable pulse train & pulse stacking for ablation or coagulation Large color LCD touch screen with parameters and fluence display Expandable multi-platform system allows instant Plug-n-Treat of Er:YAG laser or Q-Switched Nd:YAG laser handpiece (optional - shown below) TriMatrixx Technical Specifications Indications: Aesthetic Treatments for Signs of Aging, Photodamage, Fine Lines, Wrinkles, Skin Lesions, Skin Resurfacing/Refreshening and other Dermal Imperfections Laser Source (Modified) MET Erbium:YAG Wavelength: 2940 nm Energy Fluence Range: From delicate.47 J/cm 2 up to 127 J/cm 2 (at 1 mm spot size) Pulse Energy Range: 250 1000 mj Micro-Fractional Lens: 5 x 5 mm treatment area (64 dot matrix [8 x 8]) Focused Whole Beam Lens: 2 10 mm Collimated Whole Beam Lenses: 1 mm and 6 mm Pulse Repetition Rate: 1 4 Hz Pulse Mode: Single, Multiple, Adjustable Pulse Trains Pulse Durations: Short Pulse (SP) 250 or Short Mini-Pulse (SP) 500 μs Long Mini-Pulse (LP) 750 or 1000 μs Pulses Per Train: 2, or 4 PIPs (pulses in pulse) Pulse Train Length: 100 msec - 1200 msec Pulse Train Delay: 250 msec Aiming Beam: 650 nm diode laser Electrical Supply: 220 V 50 ~ 60 Hz Cooling: Self-contained closed circulating water Weight: 6 lbs (29 kg.) Cart: Custom cart with accessory drawer; table top & portable Warranty: One year standard, two and three year extended service agreements available ER:YAG HANDPIECE 2940 nm TriMatrixx Optical Lenses MFL FL CL-1 CL-6 TriMatrixx Q1064 Q-Switched Nd:YAG Laser *(Optional Handpiece) Indications: Refinement/Reduction/Removal of Pigmented Lesions, Tattoos and Photodamage Wavelengths: 1064 and 52 nm Spot Size Range: 1064 nm (2-5 mm diameter) 52 nm (1, 1.5, 2,,.5 mm diameter) * Output Energy: 400 mj @ 1064 nm and 160 mj @ 52 nm Energy Fluence: Up to 12.7 J/cm 2 (at 2 mm spot size/1064 nm) Pulse Duration: 10 ns Pulse Repetition Rate: 1 Hz to 4 Hz 1064 nm /52 nm Nd:YAG HANDPIECE Sybaritic, Inc. 9220 James Avenue South, Minneapolis, Minnesota 5541 USA Toll Free 1 (800) 445.8418 Tel 1 (952) 888.8282 Fax 1 (952) 888.8887 info@sybaritic.com 2010 Sybaritic, Inc. Mpls, MN TRI.1.1010.2.I WWW.SYBARITIC.COM